With help of this tool you can generate key content for KEYS and transponders
--Audi A8, VW Touareg, VW Phaeton, Bentley Continental --Porsche Cayenne
--BMW E60, E61, E63, E64, E65, E66, E87, E90, E91, E92. Supported immobilizers EWS4, CAS, CAS2, CAS3, Kessy, Kessy 2007/2008
With the help of programmer you can read and program internal key memory where are stored ODOMETER, VIN, ...
Just need dump from your immobilizer, put your NEW KEY (or transponder) on programmer and generate working key !
Details about the auto key programmer Hitag2 Key Tool 3.0
1. VtoolShop
Tel:+86-0755-27823977
Email:vtoolshop@gmail.com Website:http://www.vtoolshop.cm
HITAG-2 Key Tool V50
Version v50
With help of this Hitag2 ket tool you can program/generate key/transponders of Audi A8, VW
Touareg, VW Phaeton, Bentley Continental, Porsche Cayenne, BMW E38, E39, E46, E53, E60, E61,
E63, E64, E65, E66, E70, E87, E90, E91, E92. Supported immobilizers EWS2, EWS3, EWS3+,
EWS4, CAS, CAS2, CAS3. Now you can read data stored inside of the key - identification number,
ODOMETER! Added generation of keys by dump of kessy (Audi A8, VW Touareg, Bentley
Continental, Porsche Cayenne). Works with latest 2008 models. Possibility to program "dealer
keys"
Main screen of Software
For programming of Keys or Transponders of BMW cars you need to read eeprom dump from EWS
or CAS and software automaticly prepare key/transponder ready to start car.
• For programming of Keys or Transponders of Audi A8/VW
Touareg/VW Phaeton/Porsche Cayenne/ Bently Continental you need
to read eeprom from kessy (93c86 eeprom) and software
automaticly prepare key/transponder ready to start car. This is for
car up to 2007 year.
• For programming of Keys or Transponders of Audi A8/VW
Touareg/VW Phaeton/Porsche Cayenne/ Bently Continental you need
to read eeprom from kessy (93c86 eeprom) or eeprom from Engine
Control Unit and software automaticly prepare DEALER
key/transponder ready to start car. This is for car 2007 and 2008
year.
VtoolShop
Tel:+86-0755-27823977
Email:vtoolshop@gmail.com Website:http://www.vtoolshop.cm
2. VtoolShop
Tel:+86-0755-27823977
Email:vtoolshop@gmail.com Website:http://www.vtoolshop.cm
Attached picture is EXAMPLE how to programm
transponder - BMW E60 with CAS2.
First you must Read eeprom dump from CAS2 ( you can use any
programmer )
1. If you use Transponder you must switch Operation mode in
PASSWORD. If you use key you must switch Operation mode in Crypto.
2. Push button - Load immobilized dump and choose readed eeprom
from CAS2.
3. Next step is to write what number of key you want to programm in
CAS2 ( in this example is Key number 3) after push button Generate key
and Hitag2 programmer programm Transponder ( or Key).
4. After finishing programming you see message : Programming done.
VtoolShop
Tel:+86-0755-27823977
Email:vtoolshop@gmail.com Website:http://www.vtoolshop.cm
3. VtoolShop
Tel:+86-0755-27823977
Email:vtoolshop@gmail.com Website:http://www.vtoolshop.cm
5. After successcull programming of transponder or key you must push
button - Save immobilizer dump
6. Write new name of modify by software dump.
7. Save this new dump and programm in CAS2.
Now you can start car with this transponder
NKAAY
VtoolShop
Tel:+86-0755-27823977
Email:vtoolshop@gmail.com Website:http://www.vtoolshop.cm