New from BookNet Canada for 2024: Loan Stars - Tech Forum 2024
Ch1 1 v70_system_overview_en
1. Training Center
for Automation and Drives
SIMATIC PCS 7 System Training
System OverviewPage 1
Date: 15.11.2006
File:ST-PCS7SYS_V70_sys_üb.1
SIMATIC PCS 7
Siemens AG 2003. All rights reserved.
SITRAIN Training for
Automation and Drives
M1_C1_SystemOverview
SIMATIC PCS 7
System Overview
Content Page
What Is Process Control? ................................................................................................................. 2
Seamless Integration of Today's Systems ........................................................................................ 3
A New PLC Generation with Integrated
Process Control Functionality ............................................................................................ 4
SIMATIC PCS 7 - Automation Systems
Configuring with Function Blocks ............................................................................................ 5
Special Process Industry Requirements:
Top-Down Design Methodology .......................................................................................... 6
2. Training Center
for Automation and Drives
SIMATIC PCS 7 System Training
System OverviewPage 2
Date: 15.11.2006
File:ST-PCS7SYS_V70_sys_üb.2
SIMATIC PCS 7
Siemens AG 2003. All rights reserved.
SITRAIN Training for
Automation and Drives
What Is Process Control?
Automation
systems
• Measuring
• Closed-loop control
• Open-loop control
etc.
HMI systems
• Displaying
• Operating
• Recording
etc.
Communication
systems
+
AS
OS
Bus
Central engineering ES
Process control = Automation system + HMI + Communication system
In Components Automation system (AS) + HMI system (OS - operator station) + Bus
Configuration Engineering system (ES) = Engineering toolset + Process control libraries
(AS/OS blocks)
3. Training Center
for Automation and Drives
SIMATIC PCS 7 System Training
System OverviewPage 3
Date: 15.11.2006
File:ST-PCS7SYS_V70_sys_üb.3
SIMATIC PCS 7
Siemens AG 2003. All rights reserved.
SITRAIN Training for
Automation and Drives
Seamless Integration of Today's Systems
TELEPERM M
SIMATIC S5/COROS
SIMATIC Process Control System 7SIMATIC Process Control System 7
SIMATIC PCS
The development strategy for enhancing the functionality was step-by-step
combination of existing systems until a new generation system was achieved.
Tried and tested technology, as well as customer and staff experiences were
also included in this approach.
4. Training Center
for Automation and Drives
SIMATIC PCS 7 System Training
System OverviewPage 4
Date: 15.11.2006
File:ST-PCS7SYS_V70_sys_üb.4
SIMATIC PCS 7
Siemens AG 2003. All rights reserved.
SITRAIN Training for
Automation and Drives
A New PLC Generation with Integrated
Process Control Functionality
S7-400
SIMATIC ControllersSIMATIC Controllers
S7-200 S7-300
SIMATIC C7
+
The SIMATIC Process Control System 7 is based on the SIMATIC S7-400
CPUs.
The modular structure of the SIMATIC controller family allows you to
develop a solution tailored to your needs and special applications as a
complement to SIMATIC PCS 7:
Firstly with regard to selection of the appropriate performance categories
ranging from S7-200 to S7-400, and secondly with regard to selection of the
most suitable functionality.
For example, you could use SIMATIC C7 which provides a compact
combination of automation and HMI functions if you need compact stations
located right next to the production equipment.
5. Training Center
for Automation and Drives
SIMATIC PCS 7 System Training
System OverviewPage 5
Date: 15.11.2006
File:ST-PCS7SYS_V70_sys_üb.5
SIMATIC PCS 7
Siemens AG 2003. All rights reserved.
SITRAIN Training for
Automation and Drives
SIMATIC PCS 7 - Automation Systems
Configuring with Function Blocks
PROFIBUS DP
AS 414, AS 416, AS 417 (new generation)
Central Engineering System (ES)
CFC library: Proxy blocks,
for field devices and distributed I/O,
Faceplates for WinCC,
Network configuring: DP master
OS
Ind. Ethernet
SIMOVERTSIMOCODE SIPARTSIPOS 3 MC ET 200 M
HMI
system
Reporting
Reading measured values and
writing manipulated variables
Configuring
Configuring
ET 200 iS, iSP ET 200 X
PCS 7
BOX 416
DP/FF link
FF-H1
6. Training Center
for Automation and Drives
SIMATIC PCS 7 System Training
System OverviewPage 6
Date: 15.11.2006
File:ST-PCS7SYS_V70_sys_üb.6
SIMATIC PCS 7
Siemens AG 2003. All rights reserved.
SITRAIN Training for
Automation and Drives
Special Process Industry Requirements:
Top-Down Design Methodology
Plant Hierarchy
This view is where you can structure the system into components, functions,
and PIC units. You can prepare the automation solution structure in advance,
without first having to configure the actual hardware equipment. If PCS 7
components are used, you can define and connect the I/O interfaces at a later
time.