1. Specifications of our
Textile Testing Equipments
www.btexlaboratory.com

2. 07/25/13 04:28 PM 2
• Tension Meter: To Check the online tension
during passage of yarn.
• 0.1gm Accuracy, Maximum 300gm.

3. 07/25/13 04:28 PM 3
COMB SORTER
SPECIFICATIONS
• Acrylic Transparent sheet : 6” X 8” X 2 peaces, 3” X 8” X 2 Pcs.
• Fiber Mounting Templates : 6” X 8” X 2 peaces, 3” X 8” X 2 Pcs.
• Net Weight of the Unit : 3.680 Kg.
• Overall Dimensions of the Unit : 125(W) X 220(L) X 110(H)

4. 07/25/13 04:28 PM 4
Handy Ends counting Glass (8x).
• To determine ends and picks in 1 cm.

5. 07/25/13 04:28 PM 5
Handy Microscope (40x with scale):
• Closer view of yarn or fabric.

6. 07/25/13 04:28 PM 6
Digital Microscope
5x,10x,20x,40x & 100x lenses monocular projection microscope with
fibre cross section kit, high resolution CCD camera and imaging
software with measurement facilities. Scope of use cross section of
fibre or yarn, analysis of any fibre, yarn and fabric.

7. 07/25/13 04:28 PM 7
Twist Tester (Manual)
To check the Twist Per Meter of the yarn.
Test length : 50 to 250 mm
Counter : Five digit revolution counters.
Overall Dimension of the units : 630mm (L), 120mm (W), 350mm (H).
Weight of Machine : 6.560 Kg.
BS 946:1952

8. 07/25/13 04:28 PM 8
Twist Tester (Semi Automatic)
To check the twist of yarn. Test length 50 mm, 100 mm, 150 mm, 200 mm.

9. 07/25/13 04:28 PM 9
Twist Tester (Auto)
To check the Twist Per Meter of the yarn.
Test length : 250 mm
Counter : Four digit revolution counters.
Overall Dimension of the units : 620mm (L), 80mm (W), 184mm (H).
Weight of Machine : 6.000 Kg.
BS 946:1952

10. 07/25/13 04:28 PM 10
Twist Tester (Micro)
To check the Twist Per Meter of the yarn.
Test length : 250 mm
Counter : Four digit revolution counters.
Overall Dimension of the units : 970mm (L), 125mm (W), 185mm (H)
Weight of Machine : 7.700 Kg.
BS 946:1952

11. 07/25/13 04:28 PM 11
Wrap Reel (Manual)
To Prepare Lea of Yarn to check Denier, etc.
Swift Perimeter : 1 Meter
Number of leas made at a time : 5
Spread of each lea : 20 mm
Counter (Five Digits) : Manual
Overall Dimensions of the Unit : 600mm (L),450mm(W),420mm(H)
Net Weight of the Unit : 18.00 Kg.
Overall Dime. Cone Unit : 452mm (L),349mm(W),669mm (H)
Net Weight of the Cone Unit : 4.600 Kg.
Free Pocket weighing scale with Wrap reel.

12. 07/25/13 04:28 PM 12
As per standards :BS 2471:1978 (1991)
Specification:
Swift Perimeter : 1 Meter (optional) or 1.5 yards
Number of leas made at a time : 3
Spread of each lea : 20 mm
Overall Dimensions of the main Unit : 450mm (L), 260mm (W), 360mm (H).
Net Weight of the main Unit : 3.000 Kg.
Overall Dimensions of the cone Unit : 280mm x 260mm x 500mm
Net Weight of the cone Unit : 1.800 Kgs (approx).
Controls : MAIN, ZERO/RESET.
20. Wrap Reel (Semi Automatic)

13. 07/25/13 04:28 PM 13
Beeseley Balance
To check Count or Denier of the short samples.
Sizing Template : 01 No.
Sizing Template Counts System : 05 System
Overall Dimension of the Unit : 545 (L) X 128 (W) X 198(H)

14. 07/25/13 04:28 PM 14
Yarn Evenness Tester
To check the evenness and appearance of the yarn.
Over all Dimension of the Unit :61 (W) cm x 35 (D) cm x 27.5 (H) cm.
Size of Tapered Board :28.5cmx18cm, Taper Angle 2°
Size of Rectangular Board :28.5cm x 18 cm
Standard Yarn Spacing :20, 22, 26, 32, 38, 48 WRAPS per INCH
Net Weight of the Unit :21 kg.

15. 07/25/13 04:28 PM 15
Crimp Rigidity Tester
Swift Perimeter : 1 Meter
Number of leas made at a time : 1
Counter (Five Digits) : Manual
Overall Dimensions of the Unit : 600mm (L),450mm (W),420mm (H)
Net Weight of the Unit : 17.960 Kg.
Overall Dimensions of the Cone Unit: 450mm (L),350mm (W),600mm (H).
Net Weight of the Cone Unit : 7.5 Kg. (16.5 lbs)

16. 07/25/13 04:28 PM 16
Detailed Product Description
It can be applied in various testing purposes: load / elongation test /
fracture test.
T-screw transfer, manual operation, simple, stability, vertical and
horizontal.
Dimension: L*W*H(mm)160*240*460;Capacity: 500N Stroke: 150mm
Adapt with: SN, SH series force gauge, clamps and digital scale.
Mechanical Fibrometer unit to perform tensile test on Threads

17. 07/25/13 04:28 PM 17
Universal Tensile Testing Machine
To check the tensile properties of single yarn, lea as well as fabric.
Over all Dimensions of the Unit : 43cm(L)x30(W)cmx135cm(H)
Force rating : 200kg.
Force resolution : 20gm
Maximum crosshead stroke : 750mm Approx.
Crosshead displacement measurement Resolution : 0.1mm.
Crosshead speed : 20 to 400 mm/min or fixed as per users requirement.
Power Supply : 230 V AC, 50Hz,Single Phase.

18. 07/25/13 04:28 PM 18
Single Yarn Crimp Tester
Over all Dimension of the Unit :76(L)cmx30(W)cmx8cm(H)
Weight of unit :800gms.

19. 07/25/13 04:28 PM 19
Package / Shore Hardness Tester
Range : 0-1000 gm..
Instrument’s weight : 200 gm.

20. 07/25/13 04:28 PM 20
Package / Shore Hardness Tester
SPECIFICATIONS :
Product info: digital durometer for shore hardness testing pocket size model with
integrated probe
Parameters displayed: hardness result, average value, max. value
Measurement range:0-100HA(HD), Measurement deviation: ＜ 1%H
Resolution: 0.1, Auto switch off, With RS232C interface
Operating conditions: 0 to 40 , Power supply: 4x1.5V AAA (UM-4) battery℃ ℃
Battery indicator: low battery indicator
Dimensions: 162x65x38mm, Weight (not including probe):173g
Standards: DIN53505, ASTMD2240, ISO7619, JISK7215

21. 07/25/13 04:28 PM 21
18. HTHP Beaker Dyeing Machine (S.S.)
Capacity : As per requirements
Capacity of Beaker : 250 ml x 12 Beakers
Carriage Rotation : At 22 rpm. ( ± 2 rpm.)
Maximum operating Temperature : 140ºC.
Maximum rate of heating 3.50C/Min.Controlled through temperature controllerhaving auto/manual
operation.
Heater rating : 2 KW
Medium used for Heating : Glycerine
Electrical Supply : 3 KW at 230 Volts AC, 1 Phase
Geared Motor : Reversible synchronised geared motor.
Overall dimensions of the Unit : 700 mm (W) x 470 mm (H) x 370 mm (D) (Regular size)
Net Weight of the Unit : 50 Kgs. (Approx regular size)
Application : Multiutility facility for any kind of yarn and fabric dyeing.

22. 07/25/13 04:28 PM 22
Open Bath / Water Bath
Capacity : Max. 12 Beakers
Capacity of Beaker : 250 ml.
Temperature : Maximum operating Temperature 100º
Maximum rate of heating : 3.5ºC/Min.
Heater rating : 1 KW
Medium used for Heating : Water
Electrical Supply : 1 Phase
Overall dimensions of the Unit : 24”(W) x 16”(D) x 12”mm(H)
Net Weight of the Unit : 48 Kgs. with 12 Beakers

23. 07/25/13 04:28 PM 23
SPECIFICATIONS:
Inner dimensions of the Main Bath: 450 X 410 X 295 mm
Capacity (in litres) of Main Bath : 29 Litres (Approx.)
Number of Beakers (Test Vessels) : 08 Nos.Leak-proof Beakers with Gaskets
Standard Seal for Beakers : 08 Nos. Special Neoprene Gaskets
Volume of each Beakers : 550±50 ml.
Distance from Shaft : 45±10 mm
Speed of Rotation : 40±2 rpm
Temperature Controller : DIGITAL
Temperature Regulation : PT-100 with ±2.0°C (As Per I.S.O.)
Timer (Digital) : 0-99 Minutes
Motor : Single Phase, Geared Motor0 ~ 230 Volts AC, 50 Hz.
Overall Dimensions of the unit (without S. S. Stand): 710 x 570 x 785 mm
Overall Dimensions of the unit (With S. S. Stand) : 720 x 590 x 1140 mm
Net Weight of the Unit (Without S. S. Stand) : 63.5 Kg
Net Weight of the Unit (With S. S. Stand) : 81.5 Kg.
As per standards : ISO 105, BS 1006:1990, AATCC 61 (TEST 1 A ONLY),BS EN 20105,MARKS & SPENCER C4, C5
and ,37
Digital Washing Machine

24. 07/25/13 04:28 PM 24
Color Matching Cabinet
Overall Dimen. of the Instru. : 710±10 (L) x 414±10 (W) x 628±10(H)mm Overall
Dimen. of the Viewing Cavity : 685±10(L)x408±10(W)x380±10(H) Net Weight of
the Instrument : 25.480 Kg.
LIGHT SOURCES
Art. Daylight Fluorescent Lamps (D-65) : 01 Nos. (18 W)
Tungsten Filament Lamps (Inc A Lamps) : 04 Nos. (40 W)
Cool White Fluorescent Lamp (CWF) : 01 No. (18 W)
Triphosphor Fluorescent Lamp (TL-84) : 01 No. (18 W)
Ultra-Violet Black Lamp : 01 No. (18 W)
Warm White : 01 No. (18 W)
ISO 3664,,BS 950,ASTM D 1729 DIN 6173

25. 07/25/13 04:28 PM 25
GSM Cutter
The unit is recommended for yield testing i.e. the determination of weight per
unit area. The sample cutter cuts out rapidly and accurately circular
specimen of 100 Cm2
, which is exactly 1 / 100th
of a square meter. The result
is grams, multiplied by 100, gives the GSM (Grams per square meter)
DIRECTLY.
Free Pocket weighing scale with G.S.M. cutter.
Grammes per Square Meter = Specimen Weight in Grams x100

26. 07/25/13 04:28 PM 26
Stiffness Tester
Angle of inclination of intersecting plane to horizontal : 41.50
Load on test specimen : 10 + 2 gm / cm length
Over All Dimensions of the Instrument : 271(W)x148(D)x200(H)
Net Weight of Instrument : 4.500 Kgs.

27. 07/25/13 04:28 PM 27
SCOPE ABRASION PILLING
No. Of specimens 1-4 1-4
Exposed area of test specimen 6.45 cm2
6.45 cm2
Working pressure on test specimen 9 kPa (apparel)
12 kPa (upholstery)
3 kPa (ASTM D 4970)
9 kPa (BS 5690)
12 kPa (BS 5690)
Rotational speed of outer pegs 47+2.5 r/min. 47+2.5 r/min.
Drive (speed) ratio of Outer pegs: inner pegs 32.30 32.30
Total Stoke of outer and inner pegs 60.5+0.5 mm 24.0+0.5 mm
Circumferential parallelism of sample holders to abrading tables +0.05 mm +0.05 mm
Martindale Abrasion cum Pilling Tester

28. 07/25/13 04:28 PM 28
SPECIFICATIONS :
Size of Wooden Boxes (Inside) : 235 x 235 x 235 mm
Thickness of Cork Lining : 3.2 mm (As per standards)
Speed of Rotation of Boxes : 60 r.p.m.
Size of Test Specimen : 12.5 ×12.5 cm²
Size of Rubber Tubes : φ 31.5mm (OD) x φ 25.1mm(ID)x140mm(L)
Motor : 1/8 H.P. Single Phase geared motor 220V
AC
Counter : 5 DIGITS DIGITAL Pre-Set type counter
Overall Dimensions of the Unit :813 (W) x 482 (D) x 508 mm (H)
32” (W) x 19” (D) x 20” Inch (H)
Net weight : 35 kg (77 lbs)
As per standards: BS 5811, IS: 10971, IWS 152, M&S P 18
Digital Pilling Tester

29. 07/25/13 04:28 PM 29
Crockmeter
To determine the colour fastness of textiles to dry /wet rubbing
Specification
Diameter of the Rubbing Finger : 16 mm
Force on the Finger : 9 N
Size of Crocking Cloth : (5 x 5) Cms
Length of the Traverse : 105 ±5 mm
Counter (Re-settable) : 4-Digit Counter
Size of Test Specimen : 25 x 5 Cm
Overall Dimension of the Unit : 600 (W) x 190 (D) x 200 (H) mm
Net Weight of the Unit : 4 Kg. (9 lbs)
Construction : Cold-rolled steel

30. 07/25/13 04:28 PM 30
• Sublimation Fastness Tester
• To determine sublimation of dye due to temperature.

31. 07/25/13 04:28 PM 31
Light Fastness Tester
Light Source :500W, MBTL Fading Lamp(Mercury Blended Tungsten Lamp)
Test Chamber Temperature :Ambient to 50ºC
Temperature Range Control :By Water Circulation in Type ‘A’ Rectangular Cells.
Humidity Control :Inserting Saturated Solution in the type ‘A’&’C’ Cells.
‘A’ Rectangular Cells :12 Nos.
‘C’ Cylindrical Cells :50 Nos.
Space per Type :110 x 50 mm
‘A’ Rectangular Cells Specimen size:100x50x15 mm
Working Life of Lamp :2000 Hours
Power :220 Volts, single Phase, 50 HZ,A.C. Supply.
Power Consumption :Maximum 1 KW.
Water :Use of Distilled Water only in the Water Circulation Unit.
Dimension of the Main Unit :400 mm(W) x 500 mm(D) x 190 mm(H)
Weight of water circulation unit :6.2 kg.
Recommended Ambient :200-240C Temperature (Operating) Conditions
50%-65% Relative Humidity

32. 07/25/13 04:28 PM 32
Perspirometer
Frame Construction :Stainless steel
Load on the Test Specimen :5 kg.
Size of Test Specimen :100 mm x 40 mm
Size of Acrylic Separator Plates :115 mm x 60 mm
Number of Separator Plates :210Nos.
Dimensions of the Unit :225 mm(L)x72 mm(W)x182 mm(H)
Net weight of the Unit :8.3 kg.

33. 07/25/13 04:28 PM 33
Fabric Extensioner
Over all Dimensions of the Unit :61cmx10cmx12cm(H)
Weight of unit :20/500Kg.

34. 07/25/13 04:28 PM 34
Fabric thickness Gauge
Specifications
Range of measurement : 0-10 mm.
Least count of dial Gauge: 0.01 mm.
Diameter of anvil : 60 mm.
Diameter of pressure foot (Interchangeable):10mm, 25mm.
Load on the pressure foot: 78.5 g (100 gm/sq.cm.)
Throat depth : 22mm
Net weight of the Unit : 340 gms

35. 07/25/13 04:28 PM 35
Shrinkage Template
It consists of a fine calibrated Marking Template which is used to mark
Fabric with 14 inches bench marks for accurately determining
Change in fabrics/garments. After the fabrics/garment is laundered/dry
cleaned/washed Processed, the dimensional change can be read
directly and accurately In percent change with the calibrated
shrinkage scale/rule.

36. 07/25/13 04:28 PM 36
Water Repellency Tester
Over all Dimensions of the Unit : 25cmx30cmx55cm(H)
This method is aplicable to all fabrics which may or may not have been given a water
repellent finish or coating. It is not intended for use in predicting rain penetration
resistance of fabrics, since it does not measure penetration of water through the fabric.
As per standards : AATCC 22,BS 3702, ISO 4920

37. 07/25/13 04:28 PM 37
Tearing Strength Tester
Capacity : 1600 Gms(By Brass pendulum only)
: 3200 Gms(By adding Augmenting weights at the back)
: 6400 Gms (By adding Augmenting weights at the front)
Clamping surface of each Clamp : 35.5 mm length x 15.5 mm width
Distance between clamps : 2.5±0.25mm
Tearing Distance : 43±
Slit Size : 20 mm
Scale reading : 0 to 100% of range
Calibration check weight : At 1600 Gms ,at 3200 Gms.
At 6400 Gms.
Overall Dimensions of Unit : 470(W)x 300(D)x410(H) mm.
18.5” (W)x12” (D)x16”(H) Inch.
Net wt of the Unit (With check
Wt-1600, 3200&6400 Gms) : 29.5Kg.(64.9lbs)
As per standards : BS 4153, ASTM D1424, DIN 53862,M & S 29

38. 07/25/13 04:28 PM 38
SPECIFICATIONS:
Size of the Test Specimen : 40mm x 15mm.
Creasing Load : 1 Kg. (Stainless Steel)
Angle Measurement : On an Engraved Circular Scale graduated in 1 deg.
Scale Measurement : 0-180 Degrees
Material Used : All Stainless Steel (except base)
Size of the Tester : 9 Kg
As per standards : : ISO 2313,BS EN: 22313,AATCC 66,,ASTM D 1295,IS: 4681
Crease Recovery Tester

39. 07/25/13 04:28 PM 39
Densimeter
To determine E.P.I. and P.P.I. of plain weave fabric.

40. 07/25/13 04:28 PM 40
Sequence Checking Machine
A handy instrument used to check the ‘S’ and ‘Z’ sequence in the fabric
which has battery back up so that we can check the sequence on running
loom.
Over all Dimension of the Unit :36cmx26cmx15cm(H)
Weight of unit :850Gms.

41. 07/25/13 04:28 PM 41
Oven(S.S.)
Used for heating and undertaking other oven dry tests in the
laboratory.Temp range ambient to 250°C.
Over all Dimension of the Unit : 45cm(L)x40(W)cmx62(H)cm

42. 07/25/13 04:28 PM 42
Lab Incubator:
• Temperature ambient minimum 2º c.

43. 07/25/13 04:28 PM 43
ZigZag Cutter
Used to cut the samples in zig-zag style of required size.
Size of cutting pad : 31” x 28”.
Size of blade : 50 c.m. Long.
Machine dimensions : 31” (d)x 28”(w) x 54” (h).
Machine weight : 28/500 Kg.

44. 07/25/13 04:28 PM 44
SPECIFICATIONS :
Power requirements : 230 V AC, 50 Hz, 0.75 KW.
Power readout : Digital display with meter out.
Machine dimensions : 90”(w) x 60” (d) x 80” (h)
View Area : 36” x 72”.
Machine weight : 260 Kg.
Fabric Inspection Machine

45. 07/25/13 04:28 PM 45
Digital weighing scale
Capacity 210 gms
Accuracy 0.0001gm

46. 07/25/13 04:28 PM 46
• Digital weighing scale
• Capacity 10 gms
• Accuracy 0.001gm

47. 07/25/13 04:28 PM 47
Pocket Weighing Scale
An economical balance to weigh the samples for checking the GSM of the
fabrics. To be used with GSM cutter and also weigh the yarn for checking
denier.
Capacity 100 gms
Accuracy 0.01gm

48. 07/25/13 04:28 PM 48
Yarn Speed & Length
Meter
The Length Meter combines the functions of three separate instruments in one,
easy-to-use device. It accurately measures the speed and length of yarns, wires
and other filaments using a unique "wrapper" roller. This precision roller directs
the filament onto the low-inertia, U-grooved measuring wheel to maximize
contact and eliminate filament slip and breakage.
The Length Meter can also be used as either a contact or non-contact
tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear
speeds of moving surfaces such as conveyor belts, webs of fabric, etc.

49. 07/25/13 04:28 PM 49
Stroboscope
50-12,000 Flashes per minute. AC 220 V Supply

50. 07/25/13 04:28 PM 50
Stroboscope
50-12,000 Flashes per minute.
Cable free with battery back up facilities.

51. 07/25/13 04:28 PM 51
Moisture Meter
Moisture content 0-50%, Temperature – 10-60° C.

52. 07/25/13 04:28 PM 52
Sound Level Meter
30~130dB

53. 07/25/13 04:28 PM 53
Lux Meter
0-50000 LUX 0-5000 FC

54. 07/25/13 04:28 PM 54
Tachometer
Rotative velocity laser 2.5-99999 r/min, Contact 0.5-1999r/min

55. 07/25/13 04:28 PM 55
Air Permeability Tester
• THE Air Permeability Tester is a unique, instrument for
determination of the air permeability (or of the pressure
drop at a selectable air velocity) and, with some
restrictions, of the thickness of fabrics, Nonwoven, felts
and films. The main application is paper machine
clothing.

56. 07/25/13 04:28 PM 56
Water Permeability
• Porosity and water permeability are two distinct terms that describe different
characteristics of vascular prostheses. The porosity is a measure of the void
fraction within the prosthesis wall and is believed to give a rough prediction of
the capacity of the graft to anchor newly formed surrounding tissue after
implantation, whereas the water permeability indicates the rate at which water
can flow through the prosthesis wall and, when measured under physiological
pressure conditions, provides the surgeon with information about the need for
preclotting prior to implantation. The literature has not always clearly
distinguished between these two terms, and some authors in fact have
suggested that they both refer to the same property of a prosthesis. In an
attempt to clarify the issue, porosity and water permeability measurements were
made on 34 commercial vascular prostheses having different textile
constructions. Linear regression analysis demonstrated that these two
characteristics are only weakly related (r = 0.59). It is therefore recommended
that the current draft standards for such devices reference both properties:
porosity and water permeability.

57. 07/25/13 04:28 PM 57
Photos not available
• Fibre Wall Chart: Shows the characteristic properties of all types of fibres.
• Fire Retardancy Tester: To check the flame resistance of the fabric.
• Air Permeability Tester: To determine the air permeability of the fabric.
• Flexing Tester: To determine the flexing of the fabric.
• Bursting Strength Tester: To check the bursting strength of fabrics.

58. 07/25/13 04:28 PM 58
• All Standards and standard’s accessories available.
• AATCC
• ASTM
• BSEN
• ISO
• BIS
• M&S

59. 07/25/13 04:28 PM 59
NOTE
• Shown all images are just for your knowledge and the final
product design can be change.
• All the specifications are given to you on the bases of
general systems and may be changed during the process of
supply time as per newly updated parts inclusions.
• We will send you the images of newly colored instrument’s
pictures through the email and you can give suggestions for
the color selection and the way of design will be upgrade
without changing international standard’s requirements.