2. 4139 Article Size
14 mm Colour
Crystal Vitrail Light Quantity
1 Colour code
001 VL
4139 14 mm Crystal Vitrail Light 1 Wiring
5000 6 mm Violet Opal 1 389
Ice rINGs 5000
5328 6 mm
6 mm Violet Opal
White Opal 1
6 389
234
Supplies
5328 6 mm White Opal 6 234
Headpins 0.7x45 mm black 7
Supplies
CRYSTALLIZED™ – Wire 0.7 mm
Headpins Elements 0.7x45 mm
Swarovski black
black
100 cmSupplies & Tools
7
Article
Wire Article No.
Product Group Wire
0.4 mm
Amount 0.7 mmSize
black
Colour black
10 cm
Colour Code100 cmSupplies
Fancy Stones Tools 4139 1 pc. 14 mm Crystal Vitrail Light 001 VL 7 Headpins, silver, 0.7 x 45 mm
Wire 0.4 mm black 10 cm Wire, black, 0.7 mm, 100 cm
Flat nose pliers Wire, black, 0.4 mm, 10 cm
Beads Tools5000 1 pc. 6 mm Violet Opal 389
Ring mandrel Tools
Beads Flat nose pliers 6 pcs.
5328 6 mm White Opal 234
Round nose pliers Flat nose pliers
Ring mandrel Ring mandrel
Scissors Round nose pliers
Round nose pliers Scissors
Steel stick 1.7 mm, 1.2 mm Steel stick, 1.7 mm, 1.2 mm
Scissors Tweezers
Tweezers Wire cutter
Steel stick 1.7 mm, 1.2 mm
Wire cutter
Tweezers
Level of design: BEGINNERS
Wire cutter
Have also a look at the text instruction at the last page!
steP 1
Step 1
Step 1
Step 2
steP 2
Step 2
Repeat Step x4
1.2mm Repeat Step x4x4
Repeat Step
1.2mm
www.create-your-style.com 2/7
3. Step 3
Step 3
steP 3
Step 3
Step 4
Step 4
steP
Step 4
4
1.7mm
1.7mm
1.7mm
Step 5
Step 5
steP 5
Step 5
0.4 mm 10 cm
0.4 mm 10 cm
0.4 mm 10 cm
Repeat x1 x1
Repeat
Repeat x1
Repeat x1
Repeat x1 x1
Repeat
Repeat x1
Repeat x1
www.create-your-style.com 3/7
7. create your style with crystallIZeD™ – Swarovski Elements Inspiration Book
scandinavia: Ice rings
steP 1: slide one crystallIZeD™ Bead article 5328 6 mm in white opal onto a headpin and form a loop with round
nose pliers as you see in illustration.
steP 2: Insert the 1.2 mm stick into the loop and bend the wire once more around the stick. cut off wire end with side
cutter after second full loop and remove stick.
steP 3: slide one crystallIZeD™ Bead article 5000 6 mm in Violet opal onto a headpin and form a loop with about
3 mm distance to the bead.
steP 4: Insert the 1.7 mm stick into the loop and bend the wire once more around the stick. remove stick and hold
the two rounds with the round nose pliers and twist wire two times back.
steP 5: cut 10 cm of the 0.4 mm wire and string the 6 crystallIZeD™ Beads with loops onto it. Have a look onto
picture in illustration. all wraps should go to the same side. Bend each wire end once trough all beads and pull
tight like you see in illustration. Pass both wire ends through all loops and cut off rest..
steP 6: Pass the crystallIZeD™ Bead article 5000 with wire loop through the middle of bead circle and place the
crystallIZeD™ Fancy stone article 4139 over the wrapped loops of the 5000-pendant. Have a look onto
illustration.
steP 7: cut 10 cm of the 0.7 mm wire. twist the wire around the ring mandrel. string one end of spiral through loop
of crystallIZeD™ Beads article 5000 like you see in illustration. turn spiral until 2 loops of it are inside the
loop. rotate again 4 loops further but without inserting the spiral end into the loop. Have a look onto pictures
in illustration. Insert the mandrel again.
steP 8: open the loops until there remain 3 loops on either side of the two loops which pass the inside the loop of
crystallIZeD™ Beads article 5000. Have a look onto illustration. wrap with both wire ends x4 around like
you see in illustration and remove mandrel again.
steP 9: cut one wire end short and hide it with flat nose pliers inside the crystallIZeD™ Fancy stone article 4139.
steP 10: Insert the mandrel and wrap remaining wire end 2 times around like you see in illustration. cut off wire and
hide wire end with tweezers.
www.create-your-style.com 7/7