1. LUPROMAX® PRODUCT GUIDE
THE NEXT GENERATION LUBRICANT TECHNOLOGY
USING REVOLUTIONARY HEAT ACTIVATED TECHNOLOGY
PT. ANUGERAH WIDJAJA MANDIRI CHEMINDO
ONE STOP SOLUTION IN CHEMICAL ENGINEERING SERVICES

2. EXTENSIVE R&D RESEARCH ON HIGH PERFORMANCE
BIODEGRADABLE LUBRICATION TECHNOLOGY
OVERVIEW
The success of conventional lubricating oils is TYPES OF LUBRICANT
predicated upon maintaining a high film strength oil The majority of lubricants are either mineral (paraffin,
barrier between two surfaces moving relative to each napthene, asphalt), synthetic (esters, polymers), solids
other. Resistance to the movement of these surfaces is (graphite, molybdenum disulfide, Teflon), or greases (oils
defined as friction, which can be either sliding or with various organic or inorganic thickeners). Several
rolling, or which can be caused by the shearing action additives are available for these products which serve as
of a lubricant attempting to separate the two surfaces. corrosion inhibitors, rust inhibitors, etc. Modern engine oils,
Hydrodynamic, hydrostatic, and boundary lubrication for example, usually contain 8-10 different additives,
typically occur in some combination in virtually all accounting for 10-20% of the volume in a container of oil,
mechanisms which require lubrication, and most the balance being refined petroleum or synthetic oil.
commercial lubricants are reasonably capable of doing
Surface 1
the job for which they are intended. Lupromax® is a Boundary Layer
proprietary lubricant which takes normal lubrication a Fluid Lubrication Film
step further, in that it not only has a superior film
strength but also appears to impregnate the steel itself, Asperity Junction
Surface 2
metallurgically, at the friction surfaces.
Several products are available with solid particle additives
ENGINE CYLINDER WALL MAGNIFIED 1500X (graphite, moly, Teflon) in an effort to add extreme pressure
capability to the lubricant. Lupromax® lubricants contain
only pure petroleum and petroleum additives, and perform
without the negatives associated with solid particle
additives. Lupromax® blends easily with other lubricants,
Untreated Wall Treated with Lupromax and is most useful at a 15% mix.

3. REVOLUTIONARY LUPROMAX’S
HEAT ACTIVATED TECHNOLOGY
WITHOUT LUPROMAX®
METAL SURFACE METAL SURFACE
Friction
Heat Builds Up Severe Scourging
Severe Damage
WITH LUPROMAX® HAT TECHNOLOGY
METAL SURFACE METAL SURFACE METAL SURFACE
Better Compression
More Power
®
LUPROMAX®
LUPROMAX® LUPROMAX
BY PLATING THE SOLID SURFACES IT INCREASES THE TOTAL AREA IT REDUCES COEFFICIENT OF IT ENHANCES LOAD CARRYING
OF CONTACT BETWEEN TWO FRICTION CAPACITY AND LONGER WEAR.
SURFACES
BENEFITS
ü ENGINE WEAR UP TO 50%
REDUCES ü
STABILIZES COMPRESSION
ü FUEL CONSUMPTION (6-10%)
REDUCES ü
NON-PARTICULATE METAL CONDITIONER
ü ELECTRIC AMPERAGE ON DRIVE MOTORS
REDUCES ü OIL DRAIN INTERVALS (25.000 KM)
EXTEND
ü
MAXIMIZES ENGINE POWER ü NOISE LEVEL OF ENGINE
REDUCES
ü CARBON EMISSION
REDUCES ü
FORTIFIES WITH ACID NEUTRALIZER
ü ENGINE LIFE
EXTENDS REPAIRS BY PLATING INTO MINOR SCRATCHES
ü
ü
RESTORES COMPRESSION AND SURFACE IMPERFECTIONS

4. LUPROMAX®-EA
NATO STOCK NO. 9150-32-078-8661
PREMIUM QUALITY ENGINE OIL
LUPROMAX®-EA is a proprietary metal and engine oil conditioner. It was originally designed for use in gear boxes and
crank cases.
However LUPROMAX®-EA concentrate demigrates numerous properties when mixed with lubrication fluids, making it a
very versatile additive for numerous lubrication applications. It is a non-particulate, nonharmful environmentaly friendly
metal conditioner, thus, eliminating the fear of clogging your oil-filter.
APPLICATIONS FREE OF METALLIC CONTENT SPECIFICATIONS
LUPROMAX®-EA can be Unit Method Results PHYSICAL PROPERTIES
used in high compression Arensic(As) ppm ICP Not detected Appearance Amber
performance cars, trucks, Lead(Pb) ppm ICP Not detected Colour ASTM D-1500 Type 1.5
tractors, excavators,
Mercury(Ag) ppm ICP Not detected Flash Point ASTM D-92 176°C
compressors, buses, gear
Tested by SGS Testing & Control Services Singapore Pte Ltd
boxes, crank cases and Viscocity @ 40°C ASTM D-445 39.45 cSt
other industrial Specific Gravity ASTM D-4052 1.019
applications.
Copper Corrosion ASTM D-130 1a Class
DIRECTIONS FOR USE (6% weight of LUPROMAX®-EA
in a white oil, 3hr/100°C)
DOSAGE: 250ml of
LUPROMAX®-EA to 4 litres
of Engine Oil

5. 2.0
Four
Ball
Test Base
1.9 S car D Oil
iame Base
1.8 ter Oil
Base with 2% L
1.7 Oil w U
Load ith 6% PROMAX®
160 Carr 1.6 LUPR
ying OMA ®
150 Test 1.5 X
140 1.4
130 1.3
Scar Diameter (mm)
120 1.2 7000 Four
Ball
110 1.1 6500
Test
100 1.0 6000
90 0.9 5500
N/mm 2
80 0.8 5000
70 0.7 4500
N (Newton)
60 0.6 4000
50 3500
40 3000
30 2500
20 2000
10 1500
0 1000
Load-C 19N/m 500
arrying m2 5
0N/m 2
Test Ac m 160N
/mm2
0
cording Four B
all T
to Brug Four B (1m/1est Scar Dia
ger Loa all Test 000N) meter
d Capa (1h/300 Scar Diam
city N) eter
DIRECTIVE 2002/95/EC
H T HEAT ACTIVATED
TECHNOLOGY RoHS
Compliant
RoHS COMPLIANT
EUROPEAN COMMUNITY
DIRECTIVE 2002/95/EC
NATO MCRL
LISTED IN NATO MCRL ● NATO STOCK NUMBER

6. LUPROMAX® LUBRICANTS LUPROMAX® LUBRICANT RANGE
The LUPROMAX® range of lubricants have always Metalworking Fluids
?
been developed with customers’ need in mind, ? - Mineral, Silicone, Synthetic
Greases
designed to enable equipment to reach ? Additives
Gear Oil
optimum operating levels, allowing our
Open Gear Lubricants
?
customers to focus their energy on building
Pulling Cable Lubricants
?
and managing their business. LUPROMAX®
? Additives
Engine Oil
range of products offer multi-purpose high
performance lubricants which are an excellent ?Additives
Fuel Oil
alternative to other industrial lubricants. Penetrating Oil Additives
?
LUPROMAX® lubricants can be trusted to meet ? Lubricants
Wirerope
and even exceed industry standards for quality, ? Lubricants
Aerosol
reliability and performance. ?Compound
Thread

7. The identification, classification and stock numbering of the
VAPPRO & MAGNA entire range of Vappro and Magna Products have been made
PRODUCTS ARE accessible through the NATO Master Cross-Reference List
(NATO MCRL).
LISTED IN NATO MCRL Now military and commercial users of Vappro worldwide can
order/reorder easily and with total assurance of a responsible
Supply Management Authority by quoting the NATO Stock
NATO Numbers, which are assigned to most our Vappro and Magna
OTAN Products
NAMSA The NATO Codification System has been agreed on by all
NCAGE NO: Q3005 Signatories of the Alliance for use in identifying equipment
and supplies. It is recognized by 19 NATO members, 28 AC /
135 sponsoring countries and 18 user countries. In other
words, Armed Forces in 51 countries can buy Vappro and
Magna Products without any further need for verification on
its quality.
Due to dedication in product quality and client commitment,
RoHS COMPLIANT Magna International are well aware of the importance of
developing products which are both the finest performers in
DIRECTIVE 2002/95/EC
their respective fields and yet, at the same time, biodegradable
RoHS
Compliant
and environmentally-friendly. The European Union (EU)
Directive on Restriction of Hazardous Substances (RoHS)
restricts the use of harmful substance which may be
detrimental to the environment and customers. Magna
International has ensured that the products meet the Directive
on RoHS Compliant.
Vappro Products have been submitted for testing and certified
by Bureau Veritas, an established organization specialized in
QHSE (Quality, Health, Safety and Environment) management
and certification. Magna International is pleased to inform all
our current and potential customers that our products are free
of any of the restricted substance stated in the Directive
(2002/95/EC), as according to the results.

8. PT. Anugerah Widjaja Mandiri Chemindo
Jl. Karet IV No.1 Kawasan Industri Mekar Jaya,
Jl. Raya Mauk Km. 7,
Cadas Sepatan Tangerang (Banten) 15520
Phone : (62-21) 5937 2288 (Hunting)
Fax : (62-21) 5937 0670
Website : http://www.magnaindonesia.co.id
E-Mail : contactus@magnaindonesia.co.id