1. CURRICULAM VITAE
Jayashankar .C
Contact Nos. 00966 595828770/550572720
E - Mail – jsc1091@rediffmail.com
Highly, motivated, energetic, skilled and NEBOSH SAFETY professional with over 16 years
of experience in India & Middle east seeks career advancement in the field of HSE
Extensive experience in Risk Assessment, Hazard Analysis, Communicative,
Consistently exceeding both client and Management goals.
Post Applied for * Site HSE Coordinator/supervisor/Eqpt.Inspector
Professional Experience * 16 Yrs
Date of Birth * 01-04-1965
Academic Qualification * Pre Degree
Technical Qualification * NEBOSH. IGC
* Diploma in Fire & Safety form Indian Institute of
Management & Technology Chennai; India.
* Member of International Institute of Risk & Safety
Management (IIRSM) London.
* Computer Operating
P&J Safety Training * Compressed Gas, Fire Prevention, Hazardous Material
Slips Trips and Falls, Power Tools, Egress, Ladder&
Scaffolding, Lifting Safety, Aerial Personnel Basket
Painting safety, Machine Guarding, Lockout, Tag out,
Hand Tools, Electric Safety, Construction Safety,
Crane &Slings safety, Evacuation, Fall Protection,
Excavation
Training & Seminar * Incident & Injury-Free (IIF) Training by JMJ .
* Approved as Safety Supervisor by Saudi Aramco
* Permit to Work (PTW) course by Qatar Petroleum
* R.P.D. License from ministry of radiation protection
Department State of Kuwait.
* H2S / BA familiarization course by Qatar Petroleum
* Fire Fighting course by Safety Department (QP).
* First Aid.
• Valied Saudi Government Driving License
Additional Qualification * ASNT – Level – II RT

2. * ASNT – Level – II MT
* ASNT – Level – II PT
* ASNT – Level – I UT
Professional Experience:-
1. Present Position : Field HSE Senior Supervisor cum Eqpt. Inspector
Company : JGC Arabia Ltd.(Saudi Arabia)
Client : Saudi Aramco
Project : Crude separation & Utility project.
Tenure : From 1st Aug. 2009 - till present
Reporting to Safety Manager, Contribution towards developing improvements in Health and safety.
Preparation of documents comprising of Method statements, Risk assessment reports. Co-ordination
with Client Crew, reviewing and monitoring the implementation of PTW system , Participation in
interpretation and implementation of safety legislation , verification of third party certifications and
documents. Site Audits and Inspections.
PRIMARY DUTIES & RESPONSIBILITIES
• Inspection of Crane and Other Heavy Equipments
• Monitor contractor construction Safety program and safe work practice.
• Review and Evaluates Contractor Safety information.
• Assist project Team in Identifying project Safety concern.
• Review adequacy Safety system in design and contractor Safety process.
• Provide Safety and Health information/expertise to the site team.
• Provide Safety training to the site team as required.
• Ensure Safety section of the contractor bid document is complete.
• Inspect and audit construction site and labor camp.
• Verifies appropriate equipment and procedure for safe work performance.
• Conduct Safety meeting as needed.
• Leads toolbox talks on a daily basis.
• Assist in the selection of contractor.
• Participate in meeting involving contractor safety problems.
• Support contractor Safety Award program.
• Monitor/Track contractor injury report.
• Provide input for HSE report to project management.
• Participate in Incident investigation as required.
• Monitor contractor Occupational Health program implementation.
• Participate & Monitor the implementation of contractor Emergency response plan and
drill.
• Ensure site Emergency response plan are in place and are tested in a planned and regular
manner.

3. 2. Position Held : Safety Supervisor
Company : Snamprogetti Saudi Arabia Ltd.
Client : Saudi Aramco.
Project : Gas Treat and Compression/LNG recovery projects
Tenure : From.Aug.2007-April.2009
Reporting to HSE Manager. Ensure personnel are fully aware of Basic safety practices and company
HSE policies and procedures. Participate and facilitate hazard identification studies and risk
assessments as part of work-pack and pre-job assessments .Conversant with the induction Process
.Participate and encourage effective tool-box talks and on-site pre-job checks ,Identify and
implement training, instruction and support needs to all project personnel in relevant areas of HSE.
Communicate new or existing safety legislation, approved codes of practice and procedures to ensure
compliance
3. Position Held : Safety Officer
Company : Technip USA(Kuwait)
Client : EQUATE Petrochemical Company, Kuwait.
Project : Ethylene Cracking Furnace Project.
Tenure : From May 2006-Mar.2007.
Reporting to Construction Manager, coordinating with Equate safety Manager to implement all
requirements of Equate Safety Manual and Technip Safety policy. As a team leader Surveillance
and monitoring of sub contractors safety activities and on going Project jobs.
Provide site based HSE support to construction team. Promote compliance across the project with
requirements in environmental, waste management, health and hygiene standards and objectives.
Conduct site audits and inspections to ensure compliance. Maintain records and produce reports and
statistics of all safety related incidents. Accident investigation. And responsible for a designated area
for safe work environment.
4. Position Held : Safety Coordinator.
Company : Kharafi National Kuwait
Client : EQUATE Petrochemical Company, Kuwait.
Project : Ethylene Plant (Shutdown)
Tenure : From.Feb.2006-April.2006
Worked as Safety co-coordinator with Kharafi National co.(Kuwait). for EQUATE Major
Turnaround Shut down. Monitoring all site activities, unsafe condition and
Unsafe practice and reporting to Equate HSE Engineer
5. Position Held : Safety Supervisor
Company : Voltage Engineering. Ltd. (Doha, Qatar).
Client : Qatar Petroleum.
Project : Power Turbine project
Tenure : From.Oct.2003-Oct.2005
Represent safety department of the company at clients meeting ,Site inspection, observation and
reporting. Advising, planning and organizing measures to prevent hazards .Conducting Job Safety
Analysis , Preparation of Risk Assessments and Safe Job Plans Development of company’s Health
Safety and Environment Procedures Ensure availability of PPE. Development of HSE training plan and
conducting training, Monitoring and reporting on the health, safety and environmental aspects of the
project, Accident investigation ,Maintain record and produce reports and statistics of all safety
related incidents.Determine and Identify the cause of any accident or dangerous occurrence and
recommend means/measures to prevent recurrence.
6. Position Held : Safety Supervisor
Company : Cooper heat Inspecion.co.(Kuwait).
Client : Kuwait National Petroleum co..

4. Project : Refinery
Tenure : From.Mar.2000-Mar.2003
Worked as a safety Officer for Kuwait National Petroleum Company, Inspection Maintenance
supply contract. As a team leader Surveillance and monitoring all activities and observe to control
all unsafe practice.
Jan1987-Jan2000 : Worked in Indian Army
Permanent Address : V.K. Edom,
Akathethara – (PO)
Palakkad - Dist,
Kerala, India.-678 008
Passport Number : G 2825101
Nature of Duties & Responsibilities been handled:
 Implementation of the safety policy and program.
 Conducts seminars, orientation for newly hired employees, researchers and studies for the
improvement of safety in the yard.
 Provides for continuing education of employees by dissemination safety publications, rules,
posters, etc.,
 Recommends disciplinary action to safety violators who unnecessarily expose him or her or
other personal injury or property damage.
 Prepares and submits inspection reports, investigates and studies causes and recommends
corrective measures to decrease their frequency and prevents recurrence.
 Coordinates with medical sections to determine monthly accident statistics, and makes
comparative reports of it.
 Monitors radiographic test by checking the area if it is already safe and keep unauthorized
personal away from the hazardous exposure.
 Meets with representative or clients and other contractors to discuss requirements regarding
accident prevention in the job site.
 Conducts safety inspection around the area of responsibility to see to it that all working
condition is free from hazardous.
 Initiates and institutes the schedule of job site inspection, observation thoroughly equipment
flow, maintenance, material handling and personal hygiene.
 Implements proper execution plan for safety in the fabrication and construction working areas
such as traffic planning, re-routing and implementation of the same.
 Tests working areas for toxic fumes, explosives gas air mixture, combustible materials and
equipment around the area.
 Prepares reviews and maintain records and statistical data which are required by the safety
chief engineer, the client and the department of Labour and employment from time to time.
 Attends job progress meeting to keep update on the current and future plans for the project and
to advice project management on problems concerning accident prevention.
 Conducts health and safety risk assessments, toolbox talk, in house safety awareness sessions

5. and emergency exercises.
 Educate the workers on safety instructions, fire fighting, personal protection equipments, work
permit system, house keeping, first aid and emergency signs, handling of hazardous chemicals
and dangerous materials, how to act on emergencies, and safe handling of pneumatic
equipments, compressors, electrical operated tools, radiography cameras, abrasives and
plastic operations, welding and cutting, handling and storage of pressure cylinders etc.,