Lbj lição 3 - As diferentes mudanças sociais da família
Familia, criação de deus.
1. A Família Cristã no Século XXI
Protegendo seu lar dos ataques do inimigo
1
2. Então o SENHOR Deus
declarou: “Não é bom que
o homem esteja só; farei
para ele alguém que o
auxilie e lhe corresponda”.
(Gênesis 2:18)
2
3. A família é uma
instituição divina. Ela
é a base da vida
social.
3
4. Gênesis 2:18-24
18 Então o SENHOR Deus declarou: “Não é bom que o homem esteja só;
farei para ele alguém que o auxilie e lhe corresponda”.
19 Depois que formou da terra todos os animais do campo e todas as aves
do céu, o SENHOR Deus os trouxe ao homem para ver como este lhes
chamaria; e o nome que o homem desse a cada ser vivo, esse seria o seu
nome.
20 Assim o homem deu nomes a todos os rebanhos domésticos, às aves do
céu e a todos os animais selvagens. Todavia não se encontrou para o homem
alguém que o auxiliasse e lhe correspondesse.
21 Então o SENHOR Deus fez o homem cair em profundo sono e, enquanto
este dormia, tirou-lhe uma das costelas , fechando o lugar com carne.
22 Com a costela que havia tirado do homem, o SENHOR Deus fez uma
mulher e a levou até ele.
23 Disse então o homem: “Esta, sim, é osso dos meus ossos e carne da
minha carne! Ela será chamada mulher, porque do homem foi tirada”.
24 Por essa razão, o homem deixará pai e mãe e se unirá à sua mulher, e
eles se tornarão uma só carne. 4
6. objetivos
• Após esta aula , você deverá estar apto a:
COMPREENDER
• A familia no plano Divino
CONSIENTISAR-SE
• das consequências da queda para as familias.
ANALISAR
• a constituição familiar ao longo dos anos
6
7. Pastor Elinaldo
Renovato de Lima
Pastor, preleitor, escritor,
colunista e líder da
Assembléia de Deus em
Parnamirim, RN,
Nasceu em 1º de
dezembro de 1942, em
Natal (RN)
7
8. A FAMÍLIA NA ATUALIDADE
Principais desafios Como podemos vencê-los
Oração e a ajuda do
O mundo e suas ofertas
Espírito Santo
Controle, gastar menos
Finanças que se recebe.
Escola Diálogo
Internet Ser vigilante
8
9. A família reveste-se de
importância fundamental
para o equilibrio da
sociedade.
A igreja que entende essa
importância cresce sobre
um fundamento essencial
para sua fortificação.
Nesta lição entenderemos
os objetivos divinos ao
instituir a família.
9
10. São, pelo menos,
quatro os propósitos:
1. Proporcionar a
compania ao homem.
2. Construir uma base
sólida de união, abrigo e
relacionamento
3. Servir a Deus sob o
mesmo teto.
4. Adorar a Deus em
família.
10
11. Nos dias atuais,
mesmo em meio às
nossas falhas, o
nosso Salvador nos
sustenta não só
materialmente mas
também
espiritualmente:
11
12. A prescrição divina para o
casamento e formação de uma
família, é um só homem e
uma só mulher, os quais
tornam-se uma só carne,
unidos em corpo e alma. Este
ensino divino exclui o
adultério, a poligamia, a
homossexualidade, a
fornicação e o divórcio
quando antibíblico,
(Mc 10.7-9; ver MT 19.9 ). 12
14. O propósito divino era estabelecer uma instituição que
pudesse propiciar ao ser humano abrigo e relacionamento.
R –Um local especial de acolhimento, proteção e provisão.
14
15. o inimigo realmente sempre feriu os filhos de
Deus com sua tripla missão de matar, roubar
e destruir, mas teve sua derrota decretada
com o sacrifício de Cristo na cruz;
Os ferimentos causados por Satanás na
família e na Igreja são apenas no calcanhar -
mesmo que dificultem a caminhada, se houver
tratamento, não são fatais -, mas o ferimento
causado por Cristo contra ele é diretamente
na cabeça - aonde está concentrado o veneno da
serpente - que é uma parte vital do corpo que
quando destruída leva à morte.
Até que ocorra o Juízo Final, o inimigo
continuará atacando com todas as suas
forças, mas os que permanecerem fielmente
firmados em Jesus Cristos, por mais que
sofram, não serão derrotados:
15
16. O pecado é uma terrível enfermidade
que tem colocado diversas famílias à
beira da morte; ele tem sido a razão de
várias separações entre casais,
desentendimentos entre pais e filhos e
as mais variadas dificuldades
principalmente na área financeira.
A libertação do pecado depende da
busca pela santificação, a qual
também leva à salvação; mas aqueles
que não renunciarem às práticas
pecaminosas receberão a justa
retribuição por sua rebeldia: a morte
eterna. (Rm 6:22,23) 16
17. Dor, submissão,
fadigas, morte como
separação, entre
outros problemas
decorrentes da
queda, só seriam
atenuados após o
Calvário.
Hoje Cristo restaura
e alivia os
sofrimentos da
vida… 17
19. R – O PECADO
R –A MULHER TERIA FILHOS COM MUITA DOR (GN 3.16) E O SEU
DESEJO, OU SEJA A SUA VONTADE ESTARIA SUBMETIDA Á
VONTADE DE SEU MARIDO. A TERRA TAMBÉM FOI AFETADA PELO
PECADO, PRODUZINDO ESPINHOS E CARDOS (GN 3.18). 19
20. • No princípio Deus
criou…
• No passar do tempo o
homem inovou…
• Cristo reiterou a
ordem inicial …
20
21. Indiscutivelmente, a poligamia nunca foi
aprovada por Deus, mas Ele tolerava por
várias razões, entre as quais, o fato de haver
muitas mulheres desamparadas e sem
condições de conseguir um marido para
sustentá-las; tanto que, oficialmente, estava
em vigor a Lei do Levirato.
Além da poligamia, também a poliandria -
uma mulher com vários homens - e a união
homoafetiva - “casamento” homossexual - estão
fora dos padrões divinos e consistem em
pecado.
A monogamia é tão importante que Jesus
deixou bem claro que não somente o ato
consumado, mas o simples pensamento
voltado a cobiçar uma mulher alheia já é
21
considerado como adultério: (MT 5:27,28)
22. A razão da decadência familiar pode se resumir na falta de atenção à
verdadeira Palavra, pois para muitos é muito mais cômodo ouvir aquilo
que lhes convém e que lhes pareça mais agradável de se aceitar: 22
26. O fato de a mulher ter sido colocada como
adjutora, não significa que o homem tenha
o direito de tratá-la com inferioridade, pois
ele precisa dela em praticamente tudo
desde o momento que nasce até o final da
sua vida. 26
Animated vertical box list(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Box List, and then click OK to insert the graphic into the slide.Press and hold CTRL, and then select the third pair of rectangles from the top (both the smaller, first-level rectangle and the larger, second-level rectangle). Under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and then click AddShapeAfter.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bullet below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 5.92”.In the Width box, enter 6.67”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. On the Design tab, in the Themes group, click Colors, and then under Built-in click Civic. (Note: if this action is taken in a PowerPoint presentation containing more than one slide, the color scheme will be applied to all of the slides.)Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Accent 1 click Colored Fill – Accent 1 (second option from the left).Click More, and then under 3-D click Polished (first row, first option from the left).Press and hold CTRL, and then select the four larger, second-level rectangles. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles click Rounded Rectangle (second option from the left).On the Home tab, in the Font group, select Franklin Gothic Book from the Font list, and then select 24 from the Font Size list.Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Shape dialog box, in the left pane, click 3-D Format, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left).Next to Top, in the Width box, enter 4 pt,and in the Height box, enter 4 pt.Under Depth,in the Depth box, enter 1 pt.Under Surface, click the button next to Material, and then under Standard click Plastic (third option from the left). Click the button next to Lighting, and then under Special click Flat (first option from the left). On the slide, press and hold CTRL, and then select the four smaller, first-level rectangles. On the Home tab, in the Font group, select Franklin Gothic Medium from the Font list, and then enter 26 in the Font Size box.Select the top first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 50% (sixth row, seventh option from the left).Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the second first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider,and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 50% (sixth row, eighth option from the left).Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 25% (fifth row, eighth option from the left).Select the third first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 50% (sixth row, ninth option from the left).Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the fourth first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 50% (sixth row, 10th option from the left).Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 20% (fifth row, 10th option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Advanced Animation group, click Add Animation, and then click MoreEntrance Effects. In the Add Entrance Effect dialog box, under Subtle, click Expand, and then click OK.On the Animations tab, in the Timing group, in the Duration box enter 1.00 seconds.Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, select the animation effect. Click the arrow to the right of the animation effect, and then click EffectOptions. In the Expand dialog box, on the SmartArtAnimation tab, in the Group graphic list, select One by one, and then click OK.Also in the Animation Pane, click the double arrow under the animation effect to expand the contents of the list of effects.In the Animation Pane, press and hold CTRL, and then select all of the animation effects. On the Animations tab, in the Timing group, in the Start list, select With Previous.In the Animation Pane, press and hold CTRL, and then select the second, fourth, sixth and eighth animation effects (expand effects for the larger, second-level rectangles). On the Animations tab, in the Animation group, click More, and then under Entrance click Fade.In the Animation Pane, press and hold CTRL, and then select the third, fifth, and seventh animation effects. On the Animations tab, in the Timing group, in the Start list select On Click.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 63%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1, Lighter 50% (second row, second option from the left).