The fluid bed dryer is used for drying granular, crystalline, coarse or similar material in pharmaceutical, fine chemicals, dyes, food and allied products. It works on the principle of fluidization. The fluid bed dryer is not suitable for drying liquids or pasty materials.

1. J K Industries
Fluid Bed Dryer

2. Introduction
• It is most suitable for drying granular, crystalline,
coarse or similar material
• It is designed to dry pharmaceutical, fine chemicals,
dyes, food and allied products
• It is not suitable for liquid or pasty material
• Electrically / Steam heated and Thermic Fluid heated
structure
• Standard Model: Made out of mild steel and colored
• GMP Model: Made out of S.S.304 quality material and
polished to matt finished
• Contact Parts: Product Container and Retarding
Chamber made out of S.S.304/S.S.316 quality material
• The non flameproof blower motor is available

3. How it Works?
• The base of the container filled with material, is
heated with hot air stream
• The fresh air is sucked using a blower and it is
heated by electrical heaters or thermic fluid
heaters
• The hot air expands into bed of material and
create a dry atmosphere
• This phenomenon is known as fluidization

4. Tray Dryer v/s Fluid Bed Dryer
Tray Dryer
• It requires large floor
space
• Drying time is very
high
• It is difficult to operate
• There is some loss of
heat
Fluid Bed Dryer
• It requires less floor
space compare to
tray dryer
• It takes less time to
dry the material
• It is very easy to
operate
• There is no loss of
heat

5. Other Important Points
Temperature can be distributed and heat transfer rate
is high
High production can be achieved
Product’s physical and chemical properties remains
It is effective for heat sensitive products
Continues movement of product minimizes lump
formation, case hardening etc.

6. Silent Features
• Uniformity in drying and reduction in drying time
• In electrically heated model, digital temperature controller for
inlet air and digital temperature indicator for outlet air
• In steam / thermic fluid heated model, only a digital
temperature indicator provided for inlet and outlet air
• You can control the flow of inlet and outlet air manually
• Full safety provided with the machine

7. Optional Features
• PRE / MICRO V & HEPA filters are provided on demad
• Pneumatic system for lifting of product container
• Flameproof motor with flameproof enclosure
• Safe earthing arrangement
• Extra product container with trolley
• Pneumatically operated inlet and outlet dampers

8. Contact Us
J K Industries
Address:
Plot No I, 15/5, G.I.D.C.
Near Chirag Cinema, National
Highway
Kalol – 382721
Phone: +91-2764-222424
Mobile: +91-9978920441
E-mail: info@jkindus.com
Website:
http://www.jksparklerfilterpress.com