Published patent and design registration information octoberl 5th, 2012

¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ
úÖ
¿ÖÖÃÖúßµÖ •Ö−ÖÔ»Ö

OFFICIAL JOURNAL
OF
THE PATENT OFFICE

×−ÖÖÔ´Ö−Ö ÃÖÓ. 40/2012 ¿ÖãÎú¾ÖÖ¸ü ×¤ü−ÖÖÓú: 05/10/2012
ISSUE NO. 40/2012 FRIDAY DATE: 05/10/2012

¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖ ‹ú ¯ÖÏúÖ¿Ö−Ö
PUBLICATION OF THE PATENT OFFICE

16467
The Patent Office Journal 05/10/2012

INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.

(CHAITANYA PRASAD)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

5th OCTOBER, 2012

16468

CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION : 16470 – 16471

SPECIAL NOTICE : 16472 – 16473

EARLY PUBLICATION (DELHI) : 16474 – 16486

EARLY PUBLICATION (MUMBAI) : 16487 – 16506

EARLY PUBLICATION (CHENNAI) : 16507 – 16539

PUBLICATION AFTER 18 MONTHS (DELHI) : 16540 – 16571

PUBLICATION AFTER 18 MONTHS (MUMBAI) : 16572 – 16586

PUBLICATION AFTER 18 MONTHS (CHENNAI) : 16587 – 16760

PUBLICATION AFTER 18 MONTHS (KOLKATA) : 16761 – 16762

PUBLICATION UNDER SECTION 43(2) IN
RESPECT OF THE GRANT (DELHI) : 16763 – 16764

RESPECT OF THE GRANT (MUMBAI) : 16765 – 16768

PUBLICATION UNDER SECTION 43(2) IN : 16769 – 16770
RESPECT OF THE GRANT (CHENNAI)

: 16771
RESPECT OF THE GRANT (KOLKATA)

INTRODUCTION TO DESIGN PUBLICATION : 16772

DESIGN CORRIGENDUM : 16773

COPYRIGHT PUBLICATION : 16774
CANCELLATION PROCEEDINGS UNDER SECTION 19 OF
THE DESIGNS ACT, 2000 : 16775

THE DESIGNS ACT 2000 SECTION 30 DESIGN
ASSIGNMENT : 16776

REGISTRATION OF DESIGNS : 16777 - 16830

16469

THE PATENT OFFICE
KOLKATA, 05/10/2012
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their
Territorial Jurisdiction on a Zonal basis as shown below:-
1 Office of the Controller General of Patents, 4 The Patent Office,
Designs & Trade Marks, Government of India,
Boudhik Sampada Bhavan, Intellectual Property Rights Building,
Near Antop Hill Post Office,S.M.Road,Antop Hill, G.S.T. Road, Guindy,
Mumbai – 400 037 Chennai – 600 032.

Phone: (91)(22) 24123311, Phone: (91)(44) 2250 2081-84
Fax : (91)(22) 24123322 Fax : (91)(44) 2250 2066
E-mail: cgpdtm@nic.in E-mail: chennai-patent@nic.in
The States of Andhra Pradesh, Karnataka,
Kerala, Tamil Nadu and the Union
Territories of Puducherry and Lakshadweep.

2 The Patent Office,
Government of India, 5 The Patent Office (Head Office),
Boudhik Sampada Bhavan, Government of India,
Near Antop Hill Post Office,S.M.Road,Antop Hill, Boudhik Sampada Bhavan,
Mumbai – 400 037 CP-2, Sector –V, Salt Lake City,
Phone: (91)(22) 24137701 Kolkata- 700 091
Fax: (91)(22) 24130387
E-mail: mumbai-patent@nic.in Phone: (91)(33) 2367 1943/44/45/46/87
The States of Gujarat, Maharashtra, Madhya Fax: (91)(33) 2367 1988
Pradesh, Goa and Chhattisgarh and the Union E-Mail: kolkata-patent@nic.in
Territories of Daman and Diu & Dadra and Nagar
Haveli
Rest of India
3 The Patent Office,
Government of India,
Boudhik Sampada Bhavan,
Plot No. 32., Sector-14, Dwarka,
New Delhi – 110075
Phone: (91)(11) 2808 1921 – 25
Fax: (91)(11) 2808 1920 & 2808 1940
E.mail: delhi-patent@nic.in
The States of Haryana, Himachal Pradesh,
Jammu and Kashmir, Punjab, Rajasthan, Uttar
Pradesh, Uttaranchal, Delhi and the Union
Territory of Chandigarh.
Website: www.ipindia.nic.in
www.patentoffice.nic.in
All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents
(Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the
Patent Office.
Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents
drawn on a scheduled Bank at the place where the appropriate office is situated.

16470

¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ
úÖê»ÖúÖŸÖÖ, ×¤ü−ÖÖÓ 05/10/2012
úÖµÖÖÔ»ÖµÖÖë êú Öê¡ÖÖ×¬ÖúÖ¸ü êú ¯ÖŸÖê
×¾Ö×³Ö®Ö •ÖÖÆüÖë ¯Ö¸ü ÛÃ£ÖŸÖ ¯Öê™êü−™ü úÖµÖÖÔ»ÖµÖ êú ¯ÖŸÖê †ÖÓ“Ö×»Öú †Ö¬ÖÖ¸ü ¯Ö¸ü ¤üÙ¿ÖŸÖ ˆ−Öúê ¯ÖÏÖ¤êü×¿Öú †×¬ÖúÖ¸ü Öê¡Ö êú ÃÖÖ£Ö
−Öß“Öê ×¤ü‹ Ö‹ Æïü :-
1 úÖµÖÖÔ»ÖµÖ: ´ÖÆüÖ×−ÖµÖÓ¡Öú, ‹úÃ¾Ö, †×³Öú»¯Ö 4 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ “Öê®Ö‡Ô,
ŸÖ£ÖÖ ¾µÖÖ¯ÖÖ¸ü ×“ÖÅ−Ö, ‡Ó™êü»ÖêŒ“Öã†»Ö ¯ÖÏÖê¯Ö™üá ¸üÖ‡™ËüÃÖ ×²ÖÜ»›üÖ
‹−Ö™üÖò¯Ö ×Æü»Ö ›üüÖú‘Ö¸ êú ÃÖ´Öß¯Öü, ‡Ó›üÛÃ™ÒüµÖ»Ö ‡Ã™êü™ü
‹ÃÖ. ‹´Ö. ¸üÖê›ü, ‹ÃÖ†Ö‡Ô›üßÃÖß†Öê †Ö¸ü‹´Ö›üß ÖÖê›üÖˆ−Ö ‹×¸üµÖÖ
‹−Ö™üÖò¯Ö ×Æü»Ö, ´Öã´²Ö‡Ô -400 037, ³ÖÖ¸üŸÖ. ‹›ü•ÖÃÖê−™ü ™ãü ‡ÔÖ»Ö °»ÖÖÃú
±úÖê−Ö: (91)(22) 24123311 •Öß.‹ÃÖ.™üß. ¸üÖê›ü, ÖÖµÖ−›üß,
±îúŒÃÖ: (91)(22) 24123322 “Öê®Ö‡Ô - 600 032.
‡Ô.´Öê»Ö: cgpdtm@nic.in ±úÖê−Ö: (91)(44) 2250 2081-84
±îúŒÃÖ: (91)(44) 2250-2066
‡Ô.´Öê»Ö: chennai-patent@nic.in
†Ö−¬ÖÐ ¯ÖÏ¤êü¿Ö, ú−ÖÖÔ™üú, êú¸ü»Ö, ŸÖ×´Ö»Ö−ÖÖ›ãü ŸÖ£ÖÖ
¯Öã›ãü“Öê¸üß ¸üÖ•µÖ Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö, »ÖÖ«üß¯Ö
2 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ, ³ÖÖ¸üŸÖ ÃÖ¸üúÖ¸
²ÖÖî×¨üú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö, 5 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖê»ÖúÖŸÖÖ (¯ÖÏ¬ÖÖ−Ö úÖµÖÖÔ»ÖµÖ),
‹−Ö™üÖò¯Ö ×Æü»Ö ›üüÖú‘Ö¸ êú ÃÖ´Öß¯Öü, ²ÖÖî×¨üú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö,
‹ÃÖ. ‹´Ö. ¸üÖê›ü, ÃÖß¯Öß-2, ÃÖêŒ™ü¸ü-V, ÃÖÖ»™ü »Öêú ×ÃÖ™üß,
‹−Ö™üÖò¯Ö ×Æü»Ö, ´Öã´²Ö‡Ô - 400 037, úÖê»ÖúÖŸÖÖ- 700 091, ³ÖÖ¸üŸÖ.
±úÖê−Ö: (91)(22) 2413 7701, ±úÖê−Ö: (91)(33) 2367 1943/44/45/46/87
±îúŒÃÖ: (91)(22) 2413 0387 ±îúŒÃÖ/Fax: (91)(33) 2367 1988
‡Ô.´Öê»Ö: mumbai-patent@nic.in ‡Ô.´Öê»Ö: kolkata-patent@nic.in
Öã•Ö¸üÖŸÖ, ´ÖÆüÖ¸üÖÂ™Òü, ´Ö¬µÖ ¯ÖÏ¤êü¿Ö, ÖÖê†Ö ŸÖ£ÖÖ ”û¢ÖßÃÖÖœÍü
¸üÖ•µÖ Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö, ¤ü´Ö−Ö ŸÖ£ÖÖ ¤üß¾Ö, ¤üÖ¤ü¸ü ³ÖÖ¸üŸÖ úÖ †¾Ö¿ÖêÂÖ Öê¡Ö
†Öî¸ü −ÖÖ¸ü Æü¾Öê»Öß.

3 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ ×¤ü»»Öß,
²ÖÖî×¨üú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö,
¯»ÖÖò™ü ÃÖÓ. 32, ÃÖêŒ™ü¸ü - 14,
«üÖ¸üúÖ, −Ö‡Ô ×¤ü»»Öß - 110 075.
±úÖê−Ö: (91)(11) 2808 1921-25
±îúŒÃÖ: (91)(11) 2808 1920, 2808 1940
‡Ô.´Öê»Ö: delhi-patent@nic.in
Æü×¸üµÖÖÖÖ, ×Æü´ÖÖ“Ö»Ö ¯ÖÏ¤êü¿Ö, •Ö´´Öæ ŸÖ£ÖÖ ú¿´Öß¸ü,
¯ÖÓ•ÖÖ²Ö, ¸üÖ•ÖÃ£ÖÖ−Ö, ˆ¢Ö¸ü ¯ÖÏ¤êü¿Ö, ×¤ü»»Öß ŸÖ£ÖÖ
ˆ¢Ö¸üÖÓ“Ö»Ö ¸üÖ•µÖ Öê¡ÖÖë, ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö “ÖÓ›üßÖœÍü
¾Öê²ÖÃÖÖ‡™ü: http://www.ipindia.nic.in
www.patentoffice.nic.in
¯Öê™ëü™ü †×¬Ö×−ÖµÖ´Ö, 1970 ŸÖ£ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) †×¬Ö×−ÖµÖ´Ö, 2005 †£Ö¾ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) ×−ÖµÖ´Ö, 2006 «üÖ¸üÖ ¾ÖÖÓ×”ûŸÖ ÃÖ³Öß †Ö¾Öê¤ü−Ö,
ÃÖæ“Ö−ÖÖ‹Ñ, ×¾Ö¾Ö¸üÖ µÖÖ †−µÖ ¤üÃŸÖÖ¾Öê•Ö µÖÖ úÖê‡Ô ¿Öã»ú ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ êú êú¾Ö»Ö ˆ¯ÖµÖãŒŸÖ úÖµÖÖÔ»ÖµÖ ´Öë Ã¾ÖßéúŸÖ ÆüÖëÖê …
¿Öã»ú: ¿Öã»ú µÖÖ ŸÖÖê −Öú¤ü ºþ¯Ö ´Öë µÖÖ "Controller of Patents" êú −ÖÖ´Ö ´Öë ¤êüµÖ ²Öïú ›ÒüÖ°™ü µÖÖ “Öêú êú «üÖ¸üÖ ³Öê•Öß •ÖÖ ÃÖúŸÖß Æîü •ÖÖê ˆÃÖß Ã£ÖÖ−Ö êú ×úÃÖß
†−ÖãÃÖæ×“ÖŸÖ ²Öïú ´Öë ¯ÖÏ¤ü¢Ö ÆüÖê •ÖÆüÖÑ ˆ¯ÖµÖãŒŸÖ úÖµÖÖÔ»ÖµÖ ÛÃ£ÖŸÖ Æïü…

16471

SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.

(CHAITANYA PRASAD)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

16472

SPECIAL NOTICE

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.

The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.

SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.

However, if duplication of publication of any application is found, then earlier date of publication will be taken

for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months

from the date of second publication, provided that there is there is no third party representation.

16473

Early Publication:
The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.1232/DEL/2012 A
(19) INDIA
(22) Date of filing of Application :20/04/2012 (43) Publication Date : 05/10/2012

(54) Title of the invention : A PROCESS AND AN APPARATUS FOR MANUFACTURING A WET FRICTION CLUTCH PLATE

(51) International classification :B23B (71)Name of Applicant :
(31) Priority Document No :NA 1)MAKINO AUTO INDUSTRIES (P) LTD.
(32) Priority Date :NA Address of Applicant :D-146-148, SECTOR 63, NOIDA
(33) Name of priority country :NA 201301, U.P., INDIA
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)BHANADARI, ASHOK
(87) International Publication No :NA 2)BHANDARI, RAJAT
(61) Patent of Addition to Application Number :NA 3)BHANDARI, RISHUBH
Filing Date :NA 4)SHARMA, SUNIL
(62) Divisional to Application Number :NA 5)SHARMA, HIMANSHU
Filing Date :NA 6)BISHT, JYOTI
(57) Abstract :
An apparatus for manufacturing a wet friction clutch plate is disclosed. The wet friction clutch plate have a core plate and a plurality
of friction material segments adhered to an annular region of the core plate in a circumferential direction, such that a gap is provided
between the consecutive segments. The apparatus comprises of an index table capable of being rotated about the center. The index
table comprises of a plurality of clutch plate holders for securely restraining the core plate such that each clutch plate holder restrain
one core plate. An adhesive placing unit is provided for applying a uniform layer of adhesive on the annular region of the core plate
secured in the cutch plate holder. Further, a cutting and placing unit is provided for cutting a friction material into a plurality of
friction material segments and transferring the plurality of friction material segments arranged in the predefined pattern to the annular
region of the core plate with adhesive in a circumferential direction. A pressing unit is provided for pressing the friction material
segments being placed on the core plate by pneumatic pressure such that the friction material segments rigidly attach to the core plate.

No. of Pages : 30 No. of Claims : 27

16474

(19) INDIA

(54) Title of the invention : IMPROVED BURNER ASSEMBLY FOR A FLUID FUEL BURNING COOKING STOVE AND THE
METHOD OF MANUFACTURING THEREOF

(31) Priority Document No :NA 1)AGGARWAL, VINOD
(32) Priority Date :NA Address of Applicant :A BUNGLOW, OPP. HANS RAJ
(33) Name of priority country :NA COLLEGE MALKA GANJ, NEW DELHI-110007 India
Filing Date :NA 1)AGGARWAL, VINOD
(87) International Publication No :NA
(61) Patent of Addition to Application Number :415/DEL/2012
Filed on :14/02/2012
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention generally describes an improved Burner Assembly for a fluid fuel burning cooking stove and the method of its
manufacturing thereof, wherein the said improved Burner Assembly mainly comprises of (a) Burner Top Element, preferably made of
Brass and (b) Fluid Fuel-Air Mixing Cell (involving a lower cup segment thereof), preferably made of stainless steel or other alloyed
materials of enough malleability and sufficiently high melting point thereof. Manufacturing of the components viz. Burner Top
Element (2), the lower cup segment (6) involve forging of the metal work pieces or metal sheets.


16475

(19) INDIA

(54) Title of the invention : POUCH/SACHET BATCH-CUTTER ASSEMBLY FOR HIGH SPEED CONTINUOUS MOTION
APPARATUS

(51) International classification :b23b (71)Name of Applicant :
(31) Priority Document No :NA 1)CHATURVEDI ASHOK
(32) Priority Date :NA Address of Applicant :305, III FLOOR, BHANOT CORNER,
(33) Name of priority country :NA PAMPOSH ENCLAVE, GK-1, NEW DELHI-110048 India
Filing Date :NA 1)CHATURVEDI ASHOK
(87) International Publication No : NA
Filed on :07/12/2011
Filing Date :NA
(57) Abstract :
A batch-cutter assembly (200) for a high speed continuous motion apparatus (100), for cutting batches of pouches / sachets made on
the apparatus (100) is disclosed. The batch-cutter assembly (100) includes at least one pair of counter rollers (210a, 210b) and a pair of
cutting counter rollers (220a, 220b) place adjacent to each other. The at least one pair of counter rollers (210a, 210b) is configured on
the apparatus (100) to pull a series of perforated pouches (R5) from a perforation unit (116). Further, the pair of cutting counter rollers
(220a, 220b) includes a plurality of vertical cutters (230) configured on each of the surfaces (240a, 240b) of the cutting counter rollers
(220a, 220b) to receive the series of perforated pouches (R5) pulled forward form the at least one pair of counter rollers (210a, 210b)
and cut thereto into a plurality of batches of series of pouches (R6) having predetermined numbers.


16476

(19) INDIA

(54) Title of the invention : SAFETY I.V. CATHETER ASSEMBLY TO PREVENT BLOOD SPILLAGE AND/OR LEAKAGE

(51) International classification :A12B (71)Name of Applicant :
(31) Priority Document No :NA 1)POLY MEDICURE LIMITED
(32) Priority Date :NA Address of Applicant :PLOT NO. 105, SECTOR, 59, HSIIDC
(33) Name of priority country :NA INDUSTRIAL AREA, FARIDABAD, HARYANA - 121 004,
(86) International Application No :NA INDIA,
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :NA 1)BAID, RISHI
(61) Patent of Addition to Application Number :NA
Filing Date :NA
Filing Date :NA
(57) Abstract :
A safety I.V. catheter assembly (10) comprising a catheter hub (12) having a proximal end (14) and a distal end (16) defining an
interior housing (18); a catheter (20) attached to the distal end (16) of the said catheter hub (12); a needle (22) defining an axial
direction A capable of being carried into said catheter housing (18) and selectively removable therefrom, said needle (22) having a
needle shaft (54) and a proximal end (14) and a distal end (16) defining a needle tip (24); a needle hub (26) attached to the said
catheter hub (12) and a flash back chamber (28) attached to the said needle hub (26), wherein the needle shaft (54) extends through the
catheter (20) such that the needle tip (24) protrudes from the distal end (16) of the tubular catheter (20), wherein the needle shaft (54)
comprises an engagement means (56) adapted to engage with a needle guard (52) slidably arranged on the needle shaft (54) in order to
prevent the needle guard (52) from sliding off the needle tip (24), and wherein the catheter hub (12) defining the said housing (18)
have a connection end (30) and a catheter end (32) together defining a flow path, the said housing (18) comprising a stopper assembly
(34) having dimensions and shape to fit in the said housing (18) capable to seal a opening, incision or puncture (46) configured therein
when the needle (22) is retracted therefrom.


16477

(19) INDIA

(54) Title of the invention : CHEMICAL FREE GLASS INSULATORS (CFGI)

(51) International classification :C07D (71)Name of Applicant :
(31) Priority Document No :NA 1)Rajeev Jain
(32) Priority Date :NA Address of Applicant :c/o Ajay Industrial Corporation Ltd. of
(33) Name of priority country :NA B-30 Mayapuri Industrial Area Phase-1 New Delhi- 110 064.
(86) International Application No :NA India
(87) International Publication No : NA 1)Rajeev Jain
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present subject matter relates to an integrated dual glazing glass unit for unplasticized polyvinyl chloride (uPVC) doors, windows,
skylights, etc and method of manufacturing the same is described herein. The present subject matter discuss about the provision of
chemical free glazing insulation accommodating a chemical free Glazing insulation unit (CFGI unit) in between the two glass sheets.
The CFGI unit is further provided with a chemical free Glazing insulator (CFGI) and a fusible polyvinyl chloride (FPVC) gasket
removably seated in the slots grooved along the chemical free Glazing insulator (CFGI). The chemical free Glazing insulators (CFGI)
according to present subject matter ensure efficient, protective and secured structures which are suitable for any adverse climatic
conditions.


16478

(19) INDIA

(54) Title of the invention : SPECIAL CARDS GAME TO MAKE YOU GREEN CONSCIOUS

(31) Priority Document No :NA 1)ASHISH TRIKHA
(32) Priority Date :NA Address of Applicant :150, KOHAT ENCLAVE, PITAM
(33) Name of priority country :NA PURA, NEW DELHI-110034 India
Filing Date :NA 1)ASHISH TRIKHA
Filing Date :NA
Filing Date :NA
(57) Abstract :
A Game comprising of Special Cards, Under the 5 Main Headings of Air, Energy, Water, Land and Waste.


16479

(19) INDIA

(54) Title of the invention : ANTI-SEIZING ARRANGEMENT FOR ENGINE

(31) Priority Document No :NA 1)MANISH SINGH
(32) Priority Date :NA Address of Applicant :#720, PHASE-2, RAMDARBAR,
(33) Name of priority country :NA CHANDIGARH 160002 India
Filing Date :NA 1)MANISH SINGH
Filing Date :NA
Filing Date :NA
(57) Abstract :
Now these days motor vehicles are provided with warning lights but every time it is not notice by the driver which may cause seizing
of the engine. Since the prevention is better than care .with the use of this safety device the engine seizing can be avoided. The
schematic diagram & working of the invented device is mentioned below. The Present invention concerns a safety device which
makes it possible to avoid the seizing of the engine of motor vehicle by automatically stopping the engine, when the pressure of the
lubricating oil is too low in the circuit or when the temperature of the engine liner is too high. This device is to be used on internal
combustion engine fitted with inline fuel injection pump, internal combustion engine with spark plug & internal combustion engine
fitted with electrically operated fuel injection pump (rotary fuel injection pump) for preventing the seising of the engine because of the
higjj temperature of the engine liner which is because of the low lubricating oil pressure or insufficient cooling of cooling water etc.
The device for internal combustion engine fitted with inline fuel injection pump is comprised of temperature switch which sense the
high temperature of engine liner and connected in series with electrically operated stop cock, which is fitted in between fuel tank &
fuel injection pump. A 12 volt automotive battery is used as power source to the circuit. Whereas for internal combustion engine with
spark plug & internal combustion engine fitted with electrically operated fuel injection pump (rotary fuel injection pump)device is
comprised of temperature switch which sense the high temperature of engine liner and connected in series between 12 volts
automotive battery & with electrically operated fuel injection pump (rotary fuel injection pump) spark plug.


16480

(19) INDIA

(54) Title of the invention : MULTIFUEL NEELAM STOVE

(51) International classification :b23b (71)Name of Applicant :
(31) Priority Document No :NA 1)UNIVERSITY OF PETROLIUM & ENERGY STUDIES
(32) Priority Date :NA Address of Applicant :ENERGY ACRES, BIDHOLI,
(33) Name of priority country :NA DEHRADUN, UTTARAKHAND, INDIA
Filing Date :NA 1)PRADEEPTA KUMAR SAHOO
(87) International Publication No : NA 2)PANKAJ KUMAR SHARMA
(61) Patent of Addition to Application Number :NA 3)Y.K. ATTREY
Filing Date :NA 4)R.S. KAUSHIK
(62) Divisional to Application Number :NA 5)S.J. CHOPRA
Filing Date :NA
(57) Abstract :
The present subject matter relates to a multifuel burning stove which comprises of a lower combustion chamber spaced to
accommodate and ignite solid fuels. The stove is also designed with an upper combustion chamber separably positioned on the lower
combustion chamber in which the upper combustion chamber being provided with a removable hybrid burner kit for containing and
channeling gaseous fuels. The Neelam multifuel stove according to the present subject matter facilitates the operation of such stoves in
purely biomass mode, purely biogas mode, purely LPG mode and a combined mode of biomass and either LPG or biogas. The Neelam
multifuel stoves advantageously achieve low cost, user friendly and efficient multifuel stoves.


16481

(19) INDIA

(54) Title of the invention : NEEDLE TIP PROTECTOR ASSEMBLY FOR SAFETY IV CATHETER ASSEMBLY

(32) Priority Date :NA Address of Applicant :PLOT NO. 105, SECTOR 59, HSIIDC
(33) Name of priority country :NA INDUSTRIAL AREA, FARIDABAD, HARYANA - 121004,
Filing Date :NA
Filing Date :NA
(57) Abstract :
The invention relates a safety IV catheter assembly 10 comprising a catheter tube 26 having a distal end 30 and a proximal end 28; a
catheter hub 24 having a distal end 30 and a proximal end 28; a needle 14 extending through the catheter hub 24 and the catheter tube
26 having opposite proximal 28 and distal ends 30 defining an axial direction A, wherein the proximal end 28 is joined to the needle
hub 20 and the distal end 30 forms a needle tip 18 and a change in profile 34 is provided between the proximal 28 and distal 30 ends
of the needle; and a tip protector assembly 12 being arranged movably on the needle 14 in-between the catheter hub 24 and needle hub
20 outside the catheter hub 24 in an arrangement engaging with one or more second locking means 54 provided on the catheter hub 24
in its ready position, wherein the first arm 46 is deflected radially outwards by the needle 14 against a restoring force, wherein the tip
protector assembly 12 is configured to entrap the needle tip 18 upon withdrawal of the needle 14 from the catheter hub 24.


16482

(19) INDIA

(54) Title of the invention : NEEDLE TIP GUARD FOR INTRAVENOUS CATHETER ASSEMBLY

(33) Name of priority country :NA INDUSTRIAL AREA, FARIDABAD, HARYANA - 121004,
Filing Date :NA
Filing Date :NA
(57) Abstract :
The invention relates to a needle tip guard for a safety IV catheter assembly 10 comprising a catheter tube 26 having a distal end 30
and a proximal end 28; a catheter hub 24 having a distal end 30 and a proximal end 28, wherein the distal end 30 is joined to the said
catheter tube 26 and the proximal end 28 defines a chamber 34; a needle 14 extending through the catheter hub 24 and the catheter
tube 26 having opposite proximal 28 and distal 30 ends defining an axial direction A, wherein the proximal end 28 is joined to the
needle hub 20 and the distal end 30 forms a sharp tip 18 and a change in profile 36 is provided between the proximal 28 and distal 30
ends of the needle 14; and a tip protector assembly 12 movably arranged in between the catheter hub 24 and needle hub 20 on the
needle 14 such that the tip protector assembly 12 is retained partially and/or completely in the chamber 34 of the catheter hub 24 and
wherein the tip protector assembly is configured to entrap the needle tip 18 upon withdrawal of the needle 14 from the catheter hub 24.


16483

(19) INDIA

(54) Title of the invention : BURNER ASSEMBLY FOR A FLUID FUEL BURNING COOKING STOVE AND THE METHOD OF
MANUFACTURING THEREOF

(33) Name of priority country :NA COLLEGE MALKA GANG, NEW DELHI-110007 India
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention generally describes a novel Burner Assembly for a fluid fuel burning cooking stove and the method of its
manufacturing thereof, wherein the said Burner Assembly mainly comprises of (a) Burner Top Element, preferably made of Brass and
(b) Fluid Fuel-Air Mixing Cell (involving a lower cup segment thereof), preferably made of stainless steel or other alloyed materials
of enough malleability and sufficiently high melting point thereof. Manufacturing of the components viz. Burner Top Element (2), the
lower cup segment (6) involve forging of the metal work pieces or metal sheets.


16484

(19) INDIA

(54) Title of the invention : NEEDLE SAFETY DEVICE

(33) Name of priority country :NA INDUSTRIAL AREA, FARIDABAD, HARYANA - 121 004,
(86) International Application No :NA INDIA
Filing Date :NA
Filing Date :NA
(57) Abstract :
The invention relates to a needle safety device (28) for a medical device, the needle safety device (28) comprising: a base portion (30)
having a bore extending along a longitudinal center axis therethrough for receiving a needle (24); and two opposing jaws (34, 36)
ex¬tending from the base portion (30) generally in the axial direction and each having a head portion (38, 40) in the region of its free
end, wherein the needle safety device includes a locking projection (50) for securing the needle safety device (28) to the medical
device. The needle safety device according to the invention further provides at least one elastic element (44) mounted to the jaws (34,
36) in a non-surrounding manner lateral to the center axis in a region between the base portion (30) and the head portions (38, 40),
wherein the at least one elastic element (44) and the jaws (34, 36) are configured such that the jaws (34, 36) can be spread apart
against a restoring force of the at least one elastic element (44) in order to allow the needle (24) received in the bore to extend all the
way through the needle safety device (28).


16485

(19) INDIA

(54) Title of the invention : IMPROVED LAVA STONE MOUNTED COOKING STOVE AND ITS APPLICATION THEREOF

(33) Name of priority country :NA COLLEGE MALKA GANJ, NEW DELHI- 110007 India
Filed on :12/05/2011
Filing Date :NA
(57) Abstract :
The present disclosure is generally relates to proposing an improved lava stone mounted cooking stove 1, which preferably burns
gaseous fuel, namely LPG; wherein said lava stone mounded cooking stove preferably comprises of the Stove Burner Unit, installed
on the Base platform 10a and surrounded by the utensil placing stand 2; wherein the said lava stone mounted cooking stove 1 is
characterized by the optional embodiments of said Stove Burner Unit and the installation of the optional embodiments of the Stove
Burner Unit on the same Base Platform 10a of said lava stone mounted cooking stove 1.


16486

(12) PATENT APPLICATION PUBLICATION (21) Application No.1936/MUM/2012 A
(19) INDIA

(54) Title of the invention : SYSTEM AND METHOD TO ENSURE THE SAFE USE OF GRAVITY ACTUATED DESCENDING
DEVICE

(51) International classification :A62B1/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)ANTOORKAR SHAM BHALCHANDRA
(32) Priority Date :NA Address of Applicant :102, SAHAJANAND COMPLEX,
(33) Name of priority country :NA SHAHIBAUG ROAD AHMEDABAD - 380 004 GUJARAT,
(86) International Application No :NA INDIA.
(87) International Publication No :N/A 1)ANTOORKAR SHAM BHALCHANDRA
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention describes system and method to ensure the safe use of Gravity Actuated Descending Device (GADD). This is
done by assessing the performance of GADD by measuring four critical parameters namely descend speed, shock impact on user,
tensile load on the track rope and drag provided by the centrifugal brake. These measurements are done on installed meters and can be
done by any literate person without needing any expertise in physics or mechanical engineering. Once measured, the critical
parameters can be compared with their standard values provided by the manufacturer, and if any deviation is observed, corrections can
be done in the functional GADD to eliminate any risks and make it safe for human use.


16487

(19) INDIA

(54) Title of the invention : PROCESS FOR THE PREPARATION OF 4-(C2-C6)ALKYLRESORCINOL

(71)Name of Applicant :
(51) International classification :C07C37/00 1)ASHMI LIFE SCIENCES PRIVATE LIMITED
(31) Priority Document No :NA Address of Applicant :PLOT NO. L/1216/3 GAYATRI
(32) Priority Date :NA MANDIR ROAD, PHASE IV, GIDC, NARODA,
(33) Name of priority country :NA AHMEDABAD 382330, GUJARAT, INDIA.
Filing Date :NA 1)INGALE, MURALIDHAR
(87) International Publication No :N/A 2)MISTRY, SUNIL
(61) Patent of Addition to Application Number :NA 3)KADIA, PARIMAL
Filing Date :NA 4)PATEL, KAMLESH
(62) Divisional to Application Number :NA 5)MANGROLIA, JAYSUKH
Filing Date :NA 6)PATEL, MAYUR
7)PANSURIYA, CHETAN
(57) Abstract :
A process for the preparation of 4-(C2-C6)alkylresorcinol comprising the steps of: reacting resorcinoi with a (C2-C16)alkanoic acid in
the presence of a zinc chloride catalyst to produce an intermediate comprising 4-(C2-C6)acylresorcinol; isolating said intermediate by
using one or more purification methods; hydrogenating the resultant purified intermediate in the presence of suitable hydrogenation
catalysts to produce a crude product comprising 4-(C2-C6)acylresorcinol; isolating said crude product comprising 4-(C2-
C6)acy!resorcinol to produce the desired 4-(C2-C6)alkylresorcinol.


16488

(19) INDIA

(54) Title of the invention : A PROCESS FOR PREPARATION OF PARA-ALKOXYANILINE

:C07B61/00, (71)Name of Applicant :
(51) International classification B01J23/00, 1)DEEPAK NITRITE LTD.
B01J38/00 Address of Applicant :9/10, KUNJ SOCIETY, ALKAPURI,
(31) Priority Document No :NA VADODARA - 390007, Gujarat India
(32) Priority Date :NA (72)Name of Inventor :
(33) Name of priority country :NA 1)S. S. DIVEKAR
(86) International Application No :NA 2)H.B.PANCHOLI
Filing Date :NA 3)R. P. UGHADE
(87) International Publication No :N/A
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention provides a process for preparing para-alkoxyaniline or substituted para-alkoxyaniline comprising the steps of
reducing a nitro compound in the presence of a noble metal catalyst in aliphatic alcohol and sulfuric acid pre-treated with air thereby
reducing poisoning and enabling recycling of the catalyst.


16489

(19) INDIA

(54) Title of the invention : A PROCESS FOR PREPARATION OF HERBAL GELATINE

(51) International classification :A61K36/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)GARG SEEMA OMPRAKASH
(32) Priority Date :NA Address of Applicant :A-4 RACHANA APARTMENT
(33) Name of priority country :NA NEAR MANJALPUR HOSPITAL TULSIDHAM CHAR
(86) International Application No :NA RASTA MANJALPUR ROAD VADODARA Gujarat India
(87) International Publication No : NA 1)GARG SEEMA OMPRAKASH
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention deals with a process for preparation of herbal gelatine produced seeds of the plant Linum usitatisimum
commonly known as flax seed or linseed. The herbal gelatine is having many advantages over the animal source gelatine has potency
to replace it in the market. This gelatine is derived completely from the vegetable source and can be used by people of all religions.
The process is cost effective less time consuming simple and requires less man power. The herbal gelatine will be consumed by all
categories of people like vegetarians vegans and people having different religious views.


16490

(19) INDIA

(54) Title of the invention : CAPSULATED FORMULATION WITH BENEFICIAL MICROBES FOR HEALTHY PLANT
GROWTH

:A01N61/00, (71)Name of Applicant :
(51) International classification
A01N63/04 1)SHARAD NATHU CHAUDHARI
(31) Priority Document No :NA Address of Applicant :LEEDSKEM GROUP,D-50,MIDC
(32) Priority Date :NA AREA,AJINTHA ROAD, JALGAON-425 003,
(33) Name of priority country :NA MAHARASHTRA,INDIA.
Filing Date :NA 1) MR. SHARAD NATHU CHAUDHARI
(87) International Publication No :N/A
Filing Date :NA
Filing Date :NA
(57) Abstract :
For healthy and timely growth of plants, along with food various factors like Nitrogen, Phosphates, Potash, Pesticides, Fungicides,
Nematicides are required. Chemical based products are now being replaced by microbial based products because of serious effects on
the ecology especially on plants and human beings. This invention generally relates to capsulated, water soluble consortium of
microbial formulations used for activities including symbiotic & non symbiotic nitrogen fixation, phosphate solubilization, potash
mobalisation and pesticidal, fungicidal as well as nematicidal. Avantages of the present invention are these microbial formulations for
the use in agriculture are packed in capsules, which is user friendly form for easy handling and application, can be applied as is in
capsule form or can be used as solution for spraying, wherein because of complete solubility nozzles of the sprayer does not chock,
consortium of microbes in dormant stage is packed in the capsules so as to ensure compatibility, applicability at wide range of climatic
conditions, have longer shelf life, can be used in any quantity without affecting quality of the remaining product in the partially used
packets, fixed quantity is packed in each capsule for giving exact required dosage by farmers.


16491

(19) INDIA

(54) Title of the invention : AN IMPROVED WATER PROOFING ARTICLE

:E04D13/00, (71)Name of Applicant :
E04D5/00 1)THE SUPREME INDUSTRIES LIMITED
(31) Priority Document No :NA Address of Applicant :1161 & 1162, SOLITAIRE
(32) Priority Date :NA CORPORATE PARK, 167-GURU HARGOVINDJI MARG,
(33) Name of priority country :NA ANDHERI - GHATKOPAR LINK ROAD, CHAKALA,
(86) International Application No :NA ANDHERI (EAST), MUMBAI - 400 093, Maharashtra India
(87) International Publication No :N/A 1)SACHIN LADDHA
(61) Patent of Addition to Application Number :NA 2)GHOSH, A. K.
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention discloses an improved roof and basement water proofing article comprising a cellular structured material,
having layered cross linked and non-cross linked polymer material, said crosslinked polymer being coated with biaxially oriented
thermoplastic polymers.


16492

(19) INDIA

(54) Title of the invention : Napthalene Doped Polystyrene Packaging Material

:B65D1/00, (71)Name of Applicant :
B65D65/38 1)Dr. Ragini Janardanrao Dhokne
(31) Priority Document No :NA Address of Applicant :C/O N R Pathare Plot No 16 Flat No
(32) Priority Date :NA G1 Shree App. Dipkamal Society NearShahu Nagar Manewada
(33) Name of priority country :NA Besa Road Nagpur (MS) India
(86) International Application No :NA 2)Dr Vijaya Sunil Sangawar
Filing Date :NA 3)Mr Nilesh Rameshrao Pathare
(87) International Publication No : NA (72)Name of Inventor :
(61) Patent of Addition to Application Number :NA 1)Dr. Ragini Janardanrao Dhokne
Filing Date :NA 2)Dr Vijaya Sunil Sangawar
(62) Divisional to Application Number :NA 3)Mr Nilesh Rameshrao Pathare
Filing Date :NA
(57) Abstract :
The desire to extend product shelf life will continue to stimulate the development of new processing and packaging innovations.
Selection of the most appropriate product packaging requires a knowledge and understanding of the food chemistry and microbiology
of the product. Following invention provides Naphthalene doped Polystyrene (PS)samples which are resistant to acid except strong
oxidizing acids and to alkalis. It is attacked by many chemicals which cause it to craze and crack and so it is generally used for
packing products like grains and cloths etc.


16493

(19) INDIA

(54) Title of the invention : A COMPOUND HAVING A CHEMICAL FORMULA AxByCzDuEvF3, A COMPOSITE MADE
THEREFROM AND A METHOD OF MAKING THE SAME

:G11C11/22,
(51) International classification 1)DR. PRANAV PRAMODRAO BARDAPURKAR
H01L21/00
Address of Applicant :FLAT NO. 3, MALKHARE
(31) Priority Document No :NA
COMPLEX, OPP. YOUTH HOSTEL, NEAR BABA PETROL
(32) Priority Date :NA
PUMP, AURANGABAD - 431001, MAHARASHTRA, INDIA
(33) Name of priority country :NA
2)DEEPAK PRADEEP THAKUR
(86) International Application No :NA
3)DR. NILESH PRAKASHRAO BARDE
Filing Date :NA
4)PROF. KAMALAKAR MARUTIRAO JADHAV
(72)Name of Inventor :
1)DR. PRANAV PRAMODRAO BARDAPURKAR
Filing Date :NA
2)DEEPAK PRADEEP THAKUR
3)DR. NILESH PRAKASHRAO BARDE
Filing Date :NA
4)PROF. KAMALAKAR MARUTIRAO JADHAV
(57) Abstract :
The present invention provides a ferroelectric compound having a chemical composition expressed by composition formula
AxByCzDuEvF3, wherein A, B and C represent elements having valency +2, D and E represent elements having valency +4, and the
F represents the element oxygen. A composite with dispersed nano-particles of the compound AxByCzDuEvF3 in silica matrix is also
disclosed and is symbolically represented by AxByCzDuEvF3/Si02 along with a method of fabricating the composite.


16494

(19) INDIA

(54) Title of the invention : HETEROPHRAGMA ROXBURGHII FORMULATIONS TO TREAT DIABETIC GANGRENE &
GANGRENE CAUSED BY VIPERA RUSSELLI AND COBRA BITE.

:A61K36/00, (71)Name of Applicant :
A61P3/10 1)NAYAK, DINESH
(31) Priority Document No :NA Address of Applicant :1ST FLOOR, B-WING, TRIVENI
(32) Priority Date :NA BLDG, PARNAKA, DAHANU, THANE - 401601
(33) Name of priority country :NA MAHARASHTRA, INDIA
(86) International Application No :NA 2)AITHAL, RAVINDRANATH
(87) International Publication No : NA 1)NAYAK, DINESH
(61) Patent of Addition to Application Number :NA 2)AITHAL, RAVINDRANATH
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention relates to Heterophragma Roxburghii formulations to treat Diabetic Gangrene & Gangrene caused by Vipera
Russelli. These formulations are available in the form of solution, paste for topical application and oil. The bark of Heterophragma
Roxburghii is used in the preparation of these formulations. The process for the preparation of all the three kinds of formulations as
well as the steps involved in the. administration of the solution and the steps involved in the topical application of the paste and oil
have been elaborately mentioned in the detailed description. The ideal diet for the patient during the treatment has also been described.


16495

(19) INDIA

(54) Title of the invention : DEVELOPMENT OF A BIOPROCESS TO REDUCE PATHOGENIC LOAD AND MALODOR OF
HUMAN NIGHT SOIL.

(51) International classification :C05F9/00
1)MACS-AGHARKAR RESEARCH INSTITUTE
Address of Applicant :G.G. AGARKAR ROAD, PUNE-
411004, MAHARASHTRA, INDIA
2)VIKALPA TECHNOLOGIES
Filing Date :NA
1)RANADE DILIP R.
2)DHAKEPHALKAR PRASHANT K.
3)DESHPANDE MADHURA G.
Filing Date :NA
4)LANJEKAR VIKRAM B.
5)PADMANABHAN G.
Filing Date :NA
6)DNYANSAGAR RAVINDRA V
(57) Abstract :
Defecated matter, if left untreated will cause environmental pollution and serious health hazards, which is evident from the offensive
mal odor and growing pathogenic population associated with fecal matter. In the present investigation, we have described a bioprocess
that uses a defined formulation comprising of microorganisms and harmless chemicals. The said bioprocess results in accelerated
degradation of organic matter that reduces the environment polluting organic load associated with fecal excreta. The bioprocess also
inhibits the health compromising microbial pathogens that are inhibited by various metabolites produced by Lactobacillus component
of microbial formulation. The bioprocess also results in the generation of methane gas subsequent to organic matter degradation and
can be used as a source of fuel. The process also generates organic slurry that can be used as fertilizer/ organic manure. Thus, the
present investigation has described a process for treatment of fecal excreta in closed or open environment to inhibit pathogens, mal
odor, pollution associated with untreated fecal excreta.


16496

(19) INDIA

(54) Title of the invention : BOARD GAME

(51) International classification :A63F3/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)Firoz Siddiqui
(32) Priority Date :NA Address of Applicant :20 Tulips A1 Part 2 Sukhwani campus
(33) Name of priority country :NA Vallabhnagar Pimpri Pune Maharashtra India
Filing Date :NA 1)Firoz Siddiqui
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention provides a board game and a method of playing a board game. The board game includes a dice and a playing
board. The playing board includes at least two marked thereon and at least six blocks configured on each side having a predefined first
instructions sheet. Further the board game includes a plurality of rocks positioned between the two sides having a plurality of second
instructions the first element a second element and a third element defining losses and gains


16497

(19) INDIA

(54) Title of the invention : MUSTARD OIL BASED INSULATING FLUID COMPOSITION AND PROCESS FOR
PREPARATION THEREOF

(51) International classification :H01B3/20 (71)Name of Applicant :
(31) Priority Document No :NA 1)SAVITA OIL TECHNOLOGIES LIMITED
(32) Priority Date :NA Address of Applicant :66/67, NARIMAN BHAVAN,
(33) Name of priority country :NA NARIMAN POINT, MUMBAI - 400 021, MAHARASHTRA,
(86) International Application No :NA INDIA
(87) International Publication No : NA 1)CHAKRAVARTHULA SRINIVASA NARASIMHAN
(61) Patent of Addition to Application Number :NA 2)MORDE, GIRISH ASHOK
Filing Date :NA
Filing Date :NA
(57) Abstract :
Disclosed herein is a biodegradable Mustard Oil based insulating fluid composition comprising a mixture of chemically modified
Mustard Oil and alkyl esters of mustard oil fatty acids in the ratio of 70:30 to 100:0 along with additives and pour point depressant.
The process for preparation of said insulating fluid composition is also disclosed herein. The present invention discloses a method of
insulating the electrical devices thereof.


16498

(19) INDIA

(54) Title of the invention : USERS PERSONAL INFORMATION CAN BE PROCESSED IN SINGLE APPLICATION

(51) International classification :G06F17/30 (71)Name of Applicant :
(31) Priority Document No :NA 1)HARESH BHOOT
(32) Priority Date :NA Address of Applicant :2, FOCUS BUILDING, BANER
(33) Name of priority country :NA ROAD, PUNE - 411045 Maharashtra India
Filing Date :NA 1)HARESH BHOOT
Filing Date :NA
Filing Date :NA
(57) Abstract :
The user can add/retrieve his favorite content in the process application. The process applications run through cloud server and
application modules like SAAS (Software as a Service) may use this application globally to retrieve, use, and access or alter it in the
process application. These features in the process application would be termed as System and User Defined Applications. The users
like dieticians, gym instructors, doctors, chefs can login to the process application and add their inputs in both system and user defined
applications based on their needs e.g a dietician can plan a meal, check and verify daily calorie intake and daily water requirement of a
person. He/She can have a record on the intake of vitamins, minerals, protein, carbohydrates of the user. Gym instructors can check
the body mass index of a person for planning of the scheduled exercise of the user; similarly chefs can check the various cooking and
taste levels of recipe besides their general information like ingredients, quantity and measurements. In addition to that individual user
can also access all these information in the process application for his/her benefit. All users can access their relevant information
independently without any problem from the cloud server which hosts all the information of the process application as benefactors of
SAAS (Software as a Service).


16499

(19) INDIA

(54) Title of the invention : THE METHOD OF PREPARATION OF POTASSIUM FLUOROBORATE (KBF4)

(51) International classification :C01B35/12
1)THE SECRETARY, DEPARTMENT OF ATOMIC
ENERGY
Address of Applicant :O.Y.C. BUILDING, CHARTRAPATHI
SHIVAJI MAHARAJ MARG, MUMBAI 400 001,
MAHARASHTRA, INDIA
Filing Date :NA
1)R. KRISHNA PRABHU
2)S. ANTHONYSAMY
Filing Date :NA
3)K. ANANTHASIVAN
4)V. GANESAN
Filing Date :NA
5)P. R. VASUDAVA RAO
(57) Abstract :
A method of preparation of potassium fluoroborate (KBF4) comprising: heating the round bottom flask in a silicon oil bath;
transferring BF3-diethylether solution into the RB flask; adding anhydrous KF to the BF3-diethylether solution; subjecting the mixture
to the step of stirring; refluxing the mixture for 24 hrs; cooling the reaction products to the room temperature; mixing the reaction
products with acetone; subjecting the reaction products to the step of filtration to remove excess KF; and drying the final product.


16500

(19) INDIA

(54) Title of the invention : A METHOD FOR SYNTHESIZING RHODIUM METAL FOAM FROM IONIC LIQUIDS

(51) International classification :B01J23/46 (71)Name of Applicant :
(31) Priority Document No :NA 1)THE SECRETARY, DEPARTMENT OF ATOMIC
(32) Priority Date :NA ENERGY
(33) Name of priority country :NA Address of Applicant :O.Y.C. BUILDING, CHARTRAPATHI
(86) International Application No :NA SHIVAJI MAHARAJ MARG, MUMBAI 400 001,
Filing Date :NA MAHARASHTRA, INDIA
(61) Patent of Addition to Application Number :NA 1)M. JAYAKUMAR
Filing Date :NA 2)K. A. VENKATESAN
(62) Divisional to Application Number :NA 3)T. G. SRINIVASAN
Filing Date :NA 4)P. R. VASUDEVA RAO
(57) Abstract :
A method for synthesizing rhodium metal foam from ionic liquids comprising adding 1- butyl-3-methylimidazolium chloride
(bmimCl) ionic liquid in acetonitrile to rhodium chloride solution; subjecting the mixture to the step of stirring removing the solvent
from the mixture; separating the crystallized solid from the solution, and subjecting the crystallized solid to the step of fabrication of
rhodium foam.


16501

(19) INDIA

(54) Title of the invention : A SYNERGISTIC PLANT NUTRITIONAL SUPPLEMENT FORMULATION COMPRISING METAL
GLUCONATES AND PROCESS FOR ITS PREPARATION

(51) International classification :A01N37/36 (71)Name of Applicant :
(31) Priority Document No :NA 1)SFPL CROP LIFE SCIENCE PRIVATE LIMITED
(32) Priority Date :NA Address of Applicant :302, ROYAL HOUSE, 11/3, USHA
(33) Name of priority country :NA GANJ, INDORE-452001 Madhya Pradesh India
Filing Date :NA 1)KARWA, ANUP
(87) International Publication No : NA 2)SINGH, PAWAN, KUMAR
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention relates to the field of nutritional supplement formulations for plants. In particular, the present invention relates
to nutritional mixtures which supply essential elements for preventing and correcting nutritional deficiencies in plants. The
formulation essentially comprises metal gluconates and other plant nutrient supplements.The formulation has increased efficacy as it
enhances the growth and yield of the treated plant as compared to the conventionally used plant nutrition agro-chemicals.


16502

(19) INDIA

(54) Title of the invention : TISSUE PROTECTOR - A PROTECTIVE DEVICE USED TO PREVENT IATROGENIC INJURIES
TO THE ORAL TISSUES DURING TOOTH PREPARATION.

:A61C1/00,
(51) International classification 1)DR. SHEETAL NITIN PATANI
A61C3/00
Address of Applicant :MAYURI, VIDYAVIHAR COLONY,
BEHIND GURUDWARA, NASHIK ROAD, NASHIK - 422 101,
MAHARASHTRA INDIA.
2)DR. SEJAL SHEETAL PATANIQ
3)DR. SHRIKANT S. CHITKO
Filing Date :NA
4)DR. KUNAL R.SHAH
1)DR. SHEETAL NITIN PATANI
Filing Date :NA
2)DR. SEJAL SHEETAL PATANI
3)DR. SHRIKANT S. CHITKO
Filing Date :NA
4)DR. KUNAL R. SHAH
(57) Abstract :
This disclosure relates to a tissue protective device comprising of the protector assembly and Clamping/ holding assembly/ method. It
is attached to the handpiece with the function of protecting the oral tissue during cutting. This is a protective device used to prevent
iatrogenic injuries to the oral tissues.


16503

(19) INDIA

(54) Title of the invention : PROCESS FOR PREPARING NEBIVOLOL HYDROCHLORIDE VIA CTH CATALYZED
DEBENZYLATION.

(51) International classification :C07D311/58 (71)Name of Applicant :
(31) Priority Document No :NA 1)NIVIKA CHEMO PHARMA PVT LTD
(32) Priority Date :NA Address of Applicant :1811-1814, GIDC ESTATE
(33) Name of priority country :NA ANKLESHWAR-393002 BHARUCH DISTRICT GUJARAT
(86) International Application No :NA STATE India
(87) International Publication No :N/A 1)BHUPATHIRAJU NAGA SATYANARAYANA RAJU
(61) Patent of Addition to Application Number :NA 2)SHRAWAN KUMAR MISHRA
Filing Date :NA 3)SATYAN PATEL
Filing Date :NA
(57) Abstract :
The present invention relates to a process for preparing Nebivolol hydrochloride and, more particularly to an improved method of
debenzylation of a compound of formula (II) useful for preparing nebivolol hydrochloride endowed with high purity by CTH
catalyzed method by using ammonium formate as hydrogen source.


16504

(19) INDIA

(54) Title of the invention : METHOD FOR DRUGS STABILITY

(51) International classification :A61K9/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)SHARMA PURNENDU KUMAR
(32) Priority Date :NA Address of Applicant :TIT-PHARMACY, ANAND NAGAR,
(33) Name of priority country :NA BHOPAL, MADHYA PRADESH, INDIA
Filing Date :NA 1)A. BALASUBRAMANIAM
(87) International Publication No : NA 2)SHARMA PURNENDU KUMAR
Filing Date :NA
Filing Date :NA
(57) Abstract :
This invention claims a method for increasing the stability and shelf life of drugs, through cryo-annealing process without addition of
any form of additive in their original available form, it comprise of processing the drugs through -196°C temperature for specific time
duration, the process stabilizes the drug molecule. It claims that it increases the crystalline nature of the drugs without addition of any
form of additive; by decreasing the stress and intermolecular distance; it increases the shelf life and thermal stability of drugs. This
method is relatively simple process which makes the drugs more stable in its original form which makes it easier to formulate more
effectively and economically.


16505

(19) INDIA

(54) Title of the invention : 3-HALO DERIVATIVES OF THIOMALEIC ANHYDRIDE AND PROCESS FOR THE
PREPARATION THEREOF.

:C09D137/00, (71)Name of Applicant :
C08F8/34 1)DHOLAKIYA BHARATKUMAR ZAVERBHAI
(31) Priority Document No :NA Address of Applicant :APPLIED CHEMISTRY
(32) Priority Date :NA DEPARTMENT, SARDAR VALLABHBHAI NATIONAL
(33) Name of priority country :NA INSTITUTE OF TECHNOLOGY(SVNIT), ICHCHHANATH,
(86) International Application No :NA SURAT 395 007, GUJARAT, INDIA.
Filing Date :NA 2)PATEL JIGARKUMAR RAMESHBHAI
(87) International Publication No :N/A (72)Name of Inventor :
(61) Patent of Addition to Application Number :NA 1)DHOLAKIYA BHARATKUMAR ZAVERBHAI
Filing Date :NA 2)PATEL JIGARKUMAR RAMESHBHAI
Filing Date :NA
(57) Abstract :
The present invention relates to novel 3-halo derivatives of thiomaleic anhydride of formula (A). The present invention also relates to
the process for the preparation of the 3-halo derivatives of thiomaleic anhydride of formula (A). 3-halo derivatives of thiomaleic
anhydride of formula (A) are useful as an intermediate in pharmaceuticals and agrochemicals preparations, in dyes, in preparation of
conductive polymers, in fire retardant polymer and coating, in ligands for catalyst systems, and flavor and fragrances industry and in
preparation of resins as catalyst or as monomer. A process for the preparation of fire resistance polyester resin of formula (B) using 3-
halo thiomaleic anhydride of formula (A) is also provided.


16506

(12) PATENT APPLICATION PUBLICATION (21) Application No.1419/CHE/2012 A
(19) INDIA

(54) Title of the invention : QUERY BASED SEARCH ENGINE FOR OBJECTS WITH BINARY CHARACTERISTICS

(51) International classification :G06F17/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)THEKKETHALA PYLOTH VINCENT
(32) Priority Date :NA Address of Applicant :FLAT# B-006, SALARPURIA
(33) Name of priority country :NA SILVERWOODS, OFF OLD MADRAS ROAD,
(86) International Application No :NA NAGWARAPALYA, C V RAMAN NAGAR, P.O.
Filing Date :NA BANGALORE - 560 093 Karnataka India
(61) Patent of Addition to Application Number :NA 1)THEKKETHALA PYLOTH VINCENT
Filing Date :NA
Filing Date :NA
(57) Abstract :
A system and method for query based search for searching objects with binary characteristics are disclosed. The system supports
search of objects having binary characteristics or a combination of binary and non-binary characteristics using a dialogue process of
query or initial selection from the user, followed by a series of reverse queries from the engine eliciting response from the user, which
helps in narrowing down the choices to provide optimal solutions. The system allows a user to even choose those characteristics of an
object which the user is generally not aware of upfront before starting the search. Such characteristics are displayed by the system
during reverse iterations. The system being dialogue based lends itself for natural language based implementation and allows people
with disabilities to search within short time by answering the queries instead of going through several pages of results using various
keywords.


16507

Published patent and design registration information octoberl 5th, 2012

Published patent and design registration information octoberl 5th, 2012

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (18)

Ähnlich wie Published patent and design registration information octoberl 5th, 2012

Ähnlich wie Published patent and design registration information octoberl 5th, 2012 (17)

Mehr von InvnTree IP Services Pvt. Ltd.

Mehr von InvnTree IP Services Pvt. Ltd. (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

Published patent and design registration information octoberl 5th, 2012