I am available for phone or in-person interviews. Please let me know if you need any additional information.

1. CAD/BIM Manager
- Architectural -
Ronald Hart
2220 N. 24th. St.
Lafayette, IN 47904
(765) 430-5417

2. Introduction Ronald Hart
hartr @ pcisys.net
Senior architectural CAD/BIM specialist with
30+ years of architectural CAD experience.
• Actively seeking a full time position as a CAD manager.
• Willing to relocate.
• Was a technical support and training specialist for two
different CAD software companies.
• Was a CAD Manager at two corporations.
• Experienced in managing people and projects.
• Has technical expertise on most things CAD or BIM
related.
• Ideally suited for a position as an architectural CAD
Manager.

3. Experience Ronald Hart
1994–present hartr @ pcisys.net
Sole proprietor and only employee at
CAD Directions - a CAD Consultant
company.
• Provided individually customized training.
• Provided professional architectural drafting service
to architects and designers.
• Produced architectural presentations – everything
from colored 2D plans and elevations to full-color
renderings to real-time walk-thru 3D models.
• Provided technical support.

4. Experience Ronald Hart
1993–1994 hartr @ pcisys.net
DIRECTOR OF TECHNICAL SERVICES at
Sigma Design, Inc.
• Successfully implemented CAD in Wal-mart's store
planning department.
• Installed software.
• Trained operators.
• Demonstrated software.
• Provided technical support to the sales force.
• Provided maintenance and support to end users.

5. Experience Ronald Hart
1989 - 1993 hartr @ pcisys.net
CAD MANAGER for
Army and Air Force Exchange Service
• Purchased and installed hardware and software.
• Wrote custom AutoLISP programs.
• Connected the conference room's large screen
projector with the CAD computers.
• Oversaw networking of all the CAD system computer
workstations.
• Created 3-D models and custom CAD presentations.
• Created and implemented standards and procedures.
• Maintained a database of all hardware and software.
• Trained the CAD operators.

6. Experience Ronald Hart
1989 - 1989 hartr @ pcisys.net
CAD Consultant (Sole Proprietor) for
CAD Directions
• Interviewed and hired employees for client company.
• Trained CAD operators.
• Created 3D Models and fly-around presentations.
• Procured hardware and software.
• Enabled client to do 2-D design, 3-D modeling and Video imaging.
• Developed as-built CAD database of clients commercial properties.
• Automated the production of monthly space occupancy reports.
• Provided automated tenant fit-out cost estimates.
• Wrote custom software for HVAC, electrical, and inventory tracking.
• Established standards and procedures.
• Documented custom software.
• Managed the CAD personnel on a day-to day basis.
• Implemented work-flow procedures and revision-control.

7. Experience Ronald Hart
1984 - 1988 hartr @ pcisys.net
NATIONAL APPLICATIONS CONSULTANT for
Sigma Design, Inc.
• Demonstrated their architectural CAD software.
• Created custom demonstrations for new products.
• Provided demonstration support at national shows.
• Provided training and support to Regional
Application Consultants.
• Provided technical support and demonstrations at
dealer sites.
• Located and started up new CAD dealers.
• Provided CAD dealers with sales support.

8. Experience Ronald Hart
1982 - 1984 hartr @ pcisys.net
APPLICATIONS DEMONSTRATIONS SPECIALIST for
Intergraph Corp.
• Demonstrated Intergraph CAD software primarily to
architects.
• Provided technical sales support.

9. Experience Ronald Hart
1973 - 1982 hartr @ pcisys.net
Zale Corporation (Store Planning Department)
CAD MANAGER 1981 - 1982
• Managed the CAD system.
• Trained new personnel.
• Supervised the CAD drafters.
• Wrote custom software.
LEAD CAD OPERATOR 1979 - 1981
• Produced drawings on the CAD system.
• Assisted other CAD operators.
ARCHITECTURAL DRAFTSMAN 1973 - 1979
• Produced construction documents for retail stores.

10. Experience Ronald Hart
1969 - 1973 hartr @ pcisys.net
ARCHITECTURAL DRAFTSMAN
Various architectural companies
• Produced construction documents.
• Produced both pen & ink, and watercolor renderings.

11. Education Ronald Hart
hartr @ pcisys.net
Three years of Collage, no degree.
Tarrant County Junior Collage
12 Semester Hours , Art , 1979
the University of Texas at Arlington
12 Semester Hours , Art , 1972
the University of Texas at Arlington
35 Semester Hours , Architecture , 1968 - 1969
the University of Texas at Austin
29 Semester Hours , Architecture , 1967 – 1968
Permian High School, Odessa, Texas
Graduated in 1967

12. Skills Ronald Hart
hartr @ pcisys.net
I have experience in managing people and projects,
and technical expertise on most things CAD or BIM
related. Specifically;
• Managing CAD/BIM departments
• Creation of architectural 3D models
• Production of architectural renderings
• Production of architectural CDs
• Providing custom CAD/BIM training
• Developing policies and procedures
• Software demonstrations
• Maintaining hardware and software
• Speaking to groups

13. Software Ronald Hart
hartr @ pcisys.net
CAD/BIM is a dynamic and exciting field and I strive
to stay abreast of the technology as it evolves.
The programs I use most often are:
• AutoCAD
• Revit
• 3D Studio Max
• Sketchup
• Acrobat
• Photoshop
• Arris CAD
• Microsoft Office programs

14. Contact Ronald Hart
hartr @ pcisys.net
Ronald R. Hart
2220 N. 24th St.
Lafayette, IN 47904
Email: hartr@pcisys.net
Phone: 765.430.5417
Public Profile: http://www.linkedin.com/in/ronnyhart