CSD 500C Man-Portable Diamond Drill RigThe title "TITLE CSD 500C Man-Portable Diamond Drill Rig" is 35 characters long which is less than the required maximum of 40 characters. It starts with "TITLE
The document provides specifications for several diamond drill rig models from CSD, including the CSD 500C, CSD 1300G, CSD 1800X, CSD 1800A, and CSD 3000. The CSD 3000 is designed for deep-hole diamond drilling down to 3,000 meters with features like a 117mm chuck, 8,170Nm maximum torque, and 250kN maximum pull.
Ähnlich wie CSD 500C Man-Portable Diamond Drill RigThe title "TITLE CSD 500C Man-Portable Diamond Drill Rig" is 35 characters long which is less than the required maximum of 40 characters. It starts with "TITLE
Ähnlich wie CSD 500C Man-Portable Diamond Drill RigThe title "TITLE CSD 500C Man-Portable Diamond Drill Rig" is 35 characters long which is less than the required maximum of 40 characters. It starts with "TITLE (20)
CSD 500C Man-Portable Diamond Drill RigThe title "TITLE CSD 500C Man-Portable Diamond Drill Rig" is 35 characters long which is less than the required maximum of 40 characters. It starts with "TITLE
1. CSD 500C
Diamond Drill Rig
The CSD 500C man-portable drill rig is specially designed two diesel engines. The drill head is propelled by a variable
for diamond drilling in poor-access locations. Its speed motor, with a low- and high-speed feed system.
modularized design features extreme convenience to break 2. Easy Assembly/Disassembly
down into light pieces which may be hand-carried to the job The power unit, hydraulic tank, control panel and drill
site. This rig consists of two diesel power units, a hydraulic system are designed as separated units. Each unit is
system, control panel, mast, main winch, wire-line winch, lightweight to ensure easy transportation. The rig
drill head, feed system, foot clamps, etc. The robust configuration can be adjusted according to particular pad
structure and precise control system ensures a high sites, with hole angle capacity of between -45O to -90O.
penetration rate and outstanding reliability. 3. Wide-Range of Applicability
Besides working extremely well in diamond wire-line
The following points highlight the CSD 500C’s major features: drilling, this rig also meets various requirements of core
1. All-hydraulic Drill Head drilling.
The drill head is driven by two hydraulic pumps powered by
2. CSD 500C Specifications
Drill Drill Rod Diameter Drill Depth
Capacity B 600 m
N 400 m
H 200 m
Hydraulic Pressure: 22 MPa
System Cooling: Air Cooled
Power Model: 2x Yanmar 4TNV 84T
System Power: 35.5 kW (each)
Engine RPM: 2,800 rpm
Drill Max Torque: 1,120 Nm
Head Max Rotation: 1,100 rpm
Feed Stroke: 1,800 mm
Max Inside Diameter: 97 mm
Max Pull: 70 kN
Max Push: 35 kN
Main Max Pull: 30 kN
Winch Pull Speed: 26 m/min
Rope Diameter: 14 mm
Rope Length: 30 m
Wire-line Max Pull: 11 kN (bare drum)
Winch Pull Speed: 110 m/min
Rope Diameter: 5 mm
Rope Length: 500 m
Mast Length: 6.2 m
Drill Angle: 450 - 900
Foot
Drill Rod: B, N, H
Clamp
Transport Main Frame Unit: 3,450 x 1,800 x 1,500 mm
Dimensions Power Unit: 1,280 x 680 x 980 mm
Operation Unit: 1,030 x 655 x 1,135 mm
Max Unit Weight After Disassembly 280 kg
Intercore Perforaciones
Jalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302
Fax: +52 (33) 3686 8128
info@intercore.com.mx www.intercore.com.mx
3. CSD 1300G
Diamond Drill Rig
The CSD 1300G drill rig is specially designed for surface diamond 5. Dump-mast guarantees perfect stability during drilling.
drilling under wide-ranging conditions. This track-mounted drill 6. Mast folding/stretching structure facilitates rig set up.
rig facilitates convenient moves in challenging terrain. 7. Independent hydraulic leveling jacks.
8. Convenient control of feed pressure.
The durable structure and robust power supply ensures a high 9. Floating head enables breaking rods without damage.
penetration rate and outstanding reliability. The up-to-date design 10. Pre-installed hydraulic circuit check points and master
of the hydraulic system makes the CSD 1300G one of the most hydraulic gauge ensures easy diagnosis of the hydraulic system,
favored rig models around the world. plus front-opening design of the control panel makes repairs easy
& convenient.
The following points highlight the CSD 1300G’s major features: 11. Control panel gauges provide real-time drill data.
1. The pilot system improves the efficiency of the hydraulic system. 12. Mud-pump and mixer are powered by the rig’s hydraulic
2. Four-speed gear box, providing a free combination of torque system, controlled independently from the rig’s control panel.
and spindle speed. 13. Top-grade hydraulic pumps and motors of European/US origin.
3. 117 mm chuck diameter, suitable for B- to P-sized rods. 14. Powerful main winch of US origin.
4. 3.5 m drill head stroke facilitating the use of 3 m rods. 15. Self-spooling wire-line winch.
4. CSD 1300G Specifications
Drill Drill Rod Diameter Drill Depth
Capacity B 1,300 m
N 1,000 m
H 700 m
P 400 m
Hydraulic Pressure: 26 MPa
System Cooling: Air Cooled
Power Model: Cummins 6BTA 5.9 - C180
System Type: Turbo Charged
Power: 132 kW
Engine RPM: 2,500 rpm
Drill Max Torque: 4,257 Nm
Head Max Rotation: 1,182 rpm
Feed Stroke: 3,500 mm
Max Inside Diameter: 117 mm
Max Pull: 120 kN
Max Push: 50 kN
Main Max Pull: 68 kN
Winch Pull Speed: Low: 28 m/min High: 67 m/min
Rope Diameter: 16 mm
Rope Length: 30 m
Wire-line Max Pull: 11 kN (bare drum)
Winch Pull Speed: 120 m/min
Rope Diameter: 6.6 mm
Rope Length: 1,000 m
Mast Length: 10 m
Drill Angle: 450 - 900
Dump Length: 1.4 m
Foot Drill Rod: B, N, H, P
Clamp
Travel Max Permissible Gradient: 300
Capacity Max Travel Speed: 2 km/h
Transport
Dimensions L x W x H: 5,430 x 2,300 x 2,600 mm
Total
10.3 t
Weight
Intercore Perforaciones
Jalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302
Fax: +52 (33) 3686 8128
info@intercore.com.mx www.intercore.com.mx
5. CSD 1800X
Diamond Drill Rig
The CSD 1800X diamond drill rig is specially designed for deep 3. 3.5 m drill head stroke facilitating the use of 3 m rods.
diamond drilling with ultimate mobility in mind. This 4. Dump-mast guarantees perfect stability during drilling.
track-mounted rig facilitates moving around with great 5. Independent hydraulic leveling jacks.
convenience in any terrain. The robust structure plus strong 6. Convenient control of feed pressure.
power supply ensures a high penetration rate and outstanding 7. Standardized parts and components provide efficient repair
reliability. The rig is fully hydraulic, including virtually all and maintenance.
operational functions prevalent on the latest model drill rigs 8. Control panel gauges provide real-time drill data.
available on the world market. 9. Mud-pump and mixer are powered by the rig’s hydraulic
system, controlled independently from the rig’s control panel.
The following points highlight the rig’s major features: 10. Top-grade hydraulic pumps and motors of European origin.
1. Four-speed gear box, providing a free combination of torque and 11. Experienced engineers plus adequate spare parts ready to
spindle speed. provide full service.
2. 117 mm chuck diameter, suitable for B- to P-sized rods.
6. CSD 1800X Specifications
Drill Drill Rod Diameter Drill Depth
Capacity B 2,000 m
N 1,700 m
H 1,200 m
P 700 m
Hydraulic Pressure: 28 MPa
System Cooling: Air Cooled
Power Model: Cummins 6CTA 8.3
System Type: Turbo Charged
Power: 179 kW
Engine RPM: 2,200 rpm
Drill Max Torque: 5,500 Nm
Head Max Rotation: 1,200 rpm
Feed Stroke: 3,500 mm
Max Inside Diameter: 117 mm
Max Pull: 189 kN
Max Push: 50 kN
Main Max Pull: 135 kN
Winch Pull Speed: 40 m/min (Low), 80m/min (High)
Rope Diameter: 22 mm
Rope Length: 35 m
Wire-line Max Pull: 11 kN (bare drum)
Winch Pull Speed: 120 m/min
Rope Diameter: 6.6 mm
Rope Length: 1,500 m
Mast Length: 10 m
Drill Angle: 450 - 900
Dump Length: 1.1 m
Foot Drill Rod: B, N, H, P
Clamp
Travel Max Permissible Gradient: 300
Capacity Max Travel Speed: 2 km/h
Transport
Dimensions L x W x H: 5,250 x 2,320 x 2,600 mm
Total
11 t
Weight
Intercore Perforaciones
Jalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302
Fax: +52 (33) 3686 8128
info@intercore.com.mx www.intercore.com.mx
7. CSD 1800A
Diamond Drill Rig
The CSD 1800A core drill rig is specially designed for deep 7. Standardized parts and components provide efficient repair
diamond drilling with ultimate mobility in mind. This and maintenance.
track-mounted rig facilitates moving around with great 8. Control panel gauges provide real-time drill data.
convenience in any terrain. The robust structure plus strong 9. Mud-pump and mixer are powered by the rig’s hydraulic
power supply ensures a high penetration rate and outstanding system, controlled independently from the rig’s control panel.
reliability. The rig is fully hydraulic, including virtually all 10. Top-grade hydraulic pumps and motors of European origin.
operational functions prevalent on the latest model drill rigs 11. Experienced engineers plus adequate spare parts ready to
available on the world market. provide full service.
12. 9 m rod pull and sub-vertical storing capacity.
The following points highlight the CSD 1800A’s major features: 13. Drill head slide reduces drill helper’s labor intensity.
1. Four-speed gear box, providing a free combination of torque and 14. The automatic mast “up & down system” reduces auxiliary
spindle speed. work time and creates a superior rig structure.
2. 117 mm chuck diameter, suitable for B- to P-sized rods. 15. The rod collection support system has a capacity of 200, 9 m
3. 3.5 m drill head stroke facilitating the use of 3 m rods. N rods stored sub-vertically creating a more efficient and safe
4. Dump-mast guarantees perfect stability during drilling. drilling environment.
5. Independent hydraulic leveling jacks. 16. Independent hydraulic cooling system.
6. Convenient control of feed pressure. 17. The rig can be track- or truck-mounted.
8. CSD 1800A Specifications
Drill Drill Rod Diameter Drill Depth
Capacity B 2,000 m
N 1,700 m
H 1,200 m
P 700 m
Hydraulic Pressure: 28 MPa
System Cooling: Air Cooled
Power Model: Cummins 6CTA 8.3
System Type: Turbo Charged
Power: 179 kW
Engine RPM: 2,200 rpm
Drill Max Torque: 5,500 Nm
Head Max Rotation: 1,200 rpm
Feed Stroke: 3,500 mm
Max Inside Diameter: 117 mm
Max Pull: 189 kN
Max Push: 50 kN
Main Max Pull: 135 kN
Winch Pull Speed: Low: 40 m/min High: 80 m/min
Rope Diameter: 22 mm
Rope Length: 41 m
Wire-line Max Pull: 11 kN(bare drum)
Winch Pull Speed: 110 m/min
Rope Diameter: 6.6 mm
Rope Length: 1,500 m
Mast Length: 13 m
Drill Angle: 450 - 900
Dump Length: 1.1 m
Foot Drill Rod: B, N, H, P
Clamp
Travel Max Permissible Gradient: 300
Capacity Max Travel Speed: 2 km/h
Transport
Dimensions L x W x H: 6,550 x 2,320 x 2,720 mm
Total
14 t
Weight
Intercore Perforaciones
Jalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302
Fax: +52 (33) 3686 8128
info@intercore.com.mx www.intercore.com.mx
9. CSD 3000
Diamond Drill Rig
The CSD 3000 core drill rig is specially designed for 3. 117 mm chuck diameter, suitable for B- to P-sized rods.
deep-hole diamond drilling. The robust structure plus 4. Four independent hydraulic jacks guarantee a secure
strong power supply ensures a high penetration rate and drill platform.
outstanding reliability. The rig is fully hydraulic, including 5. Regardless of traditional drilling pressure control, the
virtually all operational functions prevalent on the latest theory of balance guarantees precise drilling pressure.
model drill rigs available on the world market. 6. Drill head slide reduces drill helper’s labor intensity.
7. The automatic mast “up & down system” reduces
The following points highlight the CSD 3000’s major features: auxiliary work time and creates a superior rig structure.
1. Combination of international advanced rig design and drill 8. Independent hydraulic cooling system.
background in China. 9. The rig can be track- or truck-mounted.
2. Four-speed gear box, providing a free combination of
torque and spindle speed.
10. CSD 3000 Specifications
Drill Drill Rod Diameter Drill Depth
Capacity B 3,000 m
N 2,300 m
H 1,600 m
P 1,050 m
Hydraulic Pressure: 28 MPa
System Cooling: Air Cooled
Power Model: Cummins 6LTAA 8.9 - C325
System Type: Turbo Charged
Power: 239 kW
Engine RPM: 2,200 rpm
Drill Max Torque: 8,170 Nm
Head Max Rotation: 1,250 rpm
Feed Stroke: 3,450 mm
Max Inside Diameter: 117 mm
Max Pull: 250 kN
Max Push: 110 kN
Main Max Pull: 181.44 kN
Winch Pull Speed: Low: 33 m/min High:70 m/min
Rope Diameter: 24 mm
Rope Length: 41 m
Wire-line Max Pull: 18 kN (bare drum)
Winch Pull Speed: 150 m/min
Rope Diameter: 6.6 mm
Rope Length: 2,500 m
Mast Length: 11.2 - 13.7 m
Drill Angle: 450 - 900
Dump Length: 1.4 m
Foot Drill Rod: B, N, H, P
Clamp
Travel Max Permissible Gradient: 300
Capacity Max Travel Speed: 2 km/h
Transport
Dimensions L x W x H: 11,240 x 2,310 x 3,330 mm
Total
23.5 t
Weight
Intercore Perforaciones
Jalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302
Fax: +52 (33) 3686 8128
info@intercore.com.mx www.intercore.com.mx
11. CKD 600C
Underground Core Drill Rig (wheel-mounted)
(CKD600C Series)
The CKD 600C underground diamond drill rig (wheel-mounted) is 7. Hydraulic chuck drive, foot clamps, feed cylinder and drill head,
specifically designed for underground drilling, and is capable of diamond achieving quality control for pulling/pushing rods, rising/lowering
drilling as well as other advanced drill functions. The whole structure can the drill head, etc.
be divided into three units: the control panel, rig body and power unit. 8. The model design takes advantage of “spring closed, hydraulic open”
on the chuck and foot clamps, to avoid accidents in the case of sudden
The rig body includes rotatable base, sliding mast, head rotation and feed power loss, with a maximum chuck diameter of 97 mm.
system, wire-line winch and foot clamps; the power unit includes 9. Divided into front mast support, mast and side mast, the mast system
electromotor, electric control box and hydraulic system. In addition, a slides through the flexible front mast support. The height of the mast can
mud pump can be equipped to meet a client’s special needs. be changed by adjusting the extendable side mast.
The CKD 600C underground core drill rig is an all-hydraulic system 10. Higher drill efficiency and fewer underground problems result from
which features high-efficiency drilling, ease of operation, precise control, using a multi-grade, 1.8 m feed stroke cylinder.
and uncomplicated, rapid transport between holes. 11. Ease of wheel and towing frame assembly assures access to small
drill subs. Modularized design of the rig features easy set-up and
The following points highlight the CKD 600C’s major features: disassembly, and rapid moves.
1. Combination of advanced international rig design and drill background 12. Large-scale use of standardized parts and accessories makes it
in China. easier for maintenance and management.
2. Underground drilling at any angle (-90O to +90O). 13. The comprehensive gauges on the rig facilitate the hole’s progress in
3. Capable of high-efficiency diamond drilling with self-spooling real-time.
wire-line winch. 14. Imported critical components include hydraulic pumps, motors and
4. Adjustable speed head motor (0 - 1,430 rpm). control valves, assuring the rig’s proficiency.
5. Duel pump hydraulic system, utilizing the newest load sensitive 15. An electronic step-down control box is utilized when initiating the
technology. The main hydraulic pump features power conservation, power unit, lessoning the sudden impact from the electromotor to the
increasing the rig’s efficiency. power network.
6. Featured use of imported quick couplings and valves for a compact 16. The electromotor has intelligent monitor functions which continually
structure, providing fewer malfunctions and ease of repair. check for electrical overloads, short circuits, electrical source variation,
and over- and under-pressure, etc.
12. CKD 600C Specifications
Drill Drill Rod Diameter Drill Depth
Capacity Downward Level Upward
A 1,000 m 650 m 750 m
B 750 m 470 m 650 m
N 600 m 370 m 370 m
H 350 m 210 m 210 m
Hydraulic Pressure: 26 MPa
System Cooling: Water Cooled
Power Model: Siemens Y2 - 250M - 4B35
System Power: 55 kW
Electromotor RPM: 1,480 rpm
Drill Max Torque: 1,030 Nm
Head Max Rotation: 1,250 rpm
Feed Stroke: 1,800 mm
Max Inside Diameter: 97 mm
Max Pull: 65 kN
Max Push: 65 kN
Wire-line Max Pull: 10 kN (bare drum)
Winch Pull Speed: 120 m/min (bare drum)
Rope Diameter: 6 mm
Rope Length: 800 m
Mast Length: 3.3 - 5.8 m
Drill Angle: -900 - 900
Dump Length: 1.1 m
Foot Drill Rod: B, N, H
Clamp
Transport Main Frame Unit: 330 x 1,800 x 2,170 mm
Dimensions Power Unit: 3,300 x 1,210 x 1,380 mm
Operation Unit: 840 x 730 x 1,000 mm
Total
4.03 t
Weight
Intercore Perforaciones
Jalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302
Fax: +52 (33) 3686 8128
info@intercore.com.mx www.intercore.com.mx
13. CMR 1000
Multi-purpose Drill Rig
The CMR 1000 is designed for multi-purpose diamond and 5. Lower cost
reverse circulation drilling; this machine is a high-capacity, 6. Reduced sample contamination
heavy-duty, multi-purpose drill rig. Air hammer drilling utilizes 7. Multi-purpose diamond and RC capability
axial pressure, with hydraulic pistons working against the
upward force created when drilling, ensuring the drilling force Combination of Core and RC Drilling
efficiently passes through the pipe to the bit. When using air The drill depth of most RC drill equipment is approximately
hammer drilling, rotation speed is 15-30 rpm. 400 meters due to the use of heavy, double-walled drill
pipes. The CMR 1000 is perfectly designed with the
The following highlights the CMR 1000’s major features: combination of diamond and RC drill capabilities; RC for
1. High drill efficiency shallow, inexpensive drilling and quality control, and core for
2. Adopted to complicated ground stratum deep drilling and reserve estimation – all in one rig.
3. Quality hole formation
4. Simple drill technique
14. CMR 1000 Specifications
Drill Diamond Dia of Drill Rod Drill Depth
Capacity Drilling B 2,000 m
N 1,500 m
H 1,000 m
P 750 m
4” 400 m
RC 4.5” 320 m
Hydraulic Pressure: 29 MPa
System Cooling: Air Cooled
Power Model: Cummins 6LTAA 8.9 - C325
System Type: Turbo Charged
Power: 239 kW
Engine RPM: 2,200 rpm
Drill Max Torque: 11,400 Nm
Head Max Rotation: 1,180 rpm
Feed Stroke: 7,320 mm
Head Type: Top Drive
Max Pull: 160 kN
Max Push: 80 kN
Main Max Pull: 138 kN @ 50 m/min
Winch Pull Speed: 85 kN @ 80 m/min
Rope Diameter: 22 mm
Rope Length: 25 m
Wire-line Max Pull: 14 kN @ 120 m/min (bare drum)
Winch Pull Speed: 5.5 kN @ 380 m/min (bare drum)
Rope Diameter: 6.6 mm
Rope Length: 2,000 m
Mast Length: 13.3 m
Drill Angle: 450 - 900
Dump Length: 1.4 m
Foot Drill Rod: B, N, H, P, PW
Clamp
Foot Clamp
Drill Rod: 3.5”, 4”, 4.5”
Shackle Equipment
Transport
Dimensions L x W x H: 13,300 x 2,500 x 3,230 mm
Total
20 t
Weight
Intercore Perforaciones
Jalisco, México. C.P. 45645
Tel: +52 (33) 3188 9300 +52 (33) 3188 9301 +52 (33) 3188 9302
Fax: +52 (33) 3686 8128
info@intercore.com.mx www.intercore.com.mx