Value Proposition canvas- Customer needs and pains
Â
Reciprocating compressor and pumps
1.
2. ThermodynamicsThermodynamics
ïThermodynamics is the study of the
effects of work, heat, and energy on a
system.
ïThermodynamics is only concerned with
macroscopic (large-scale)µscopic
changes and observations
3. The Laws of Thermodynamics:The Laws of Thermodynamics:
SummarySummary
ïZeroth Law
 If two systems are each in thermal equilibrium with a third,
they are also in thermal equilibrium with each other.
ïFirst Law
The increase in internal energy of a closed system is equal
to the difference of the heat supplied to the system and
the work done by it: U = Q - WÎ
ïSecond Law
Heat cannot spontaneously flow from a colder location to
a hotter location.
ïThird Law
The entropy of all systems and of all states of a
system is smallest at absolute zero
3
6. Thermodynamic ProcessesThermodynamic Processes
ï Isobaric process : the pressure is constant.
ï Isochoric process : the volume is constant.
ï Isothermal process :the temperature is constant.
ï Adiabatic process : no heat enters or leaves the
system; i.e. Q = 0.
ï Isentropic process : the entropy is constant. It is also
known as reversible adiabatic process.
ï Isenthalpic Process: occurs at a constant Enthalpy
6
7. The Ideal Gas LawThe Ideal Gas Lawï Ideal gas law : PV = mRT or Pv = RT,
where m is the no. of kmoles, v is the volume per kmole, T is the
absolute temperature in K, and the gas constant R = 8.314 x 103
J/
(K.kmol).
ï For a constant quantity of gas, P1V1/T1 = P2V2/T2.
Avogadro's law : For a given mass of an ideal gas, the volume and
amount (moles n) of the gas are directly proportional if the temperature
and pressure are constant. V is proportional to moles n
v/n=k
PP PP VV
VV
T increasingT increasing
TT TT
V increasingV increasing
P increasingP increasing
8. The energy balance for a steady-flowThe energy balance for a steady-flow
device (nozzle, compressor, turbine anddevice (nozzle, compressor, turbine and
pump) with one inlet and one exit is:pump) with one inlet and one exit is:
9. Fluid Moving EquipmentFluid Moving Equipment
Fluids are moved through flow systems using compressors,
pumps, fans and blowers. Such devices increase the mechanical
energy of the fluid. The additional energy can be used to increase
âą Velocity (flow rate)
âą Pressure
âą Elevation
10.
11. CASCAS
ï¶ COMPONENT
ï Intake Air Filters : Prevent dust and atmospheric impurities from entering
compressor. Dust causes sticking valves, scored cylinders, excessive
wear etc.
ï Compressor : Pressurizes the air
ï Inter-stage Coolers : Reduce the temperature of the air (gas) before it
enters the next stage to reduce the work of compression and increase
efficiency. They can be water-or air-cooled.
ï After Coolers : Reduce the temperature of the discharge air, and thereby
reduce the moisture carrying capacity of air.
ï Air-dryers : Air dryers are used to remove moisture, as air for instrument
and pneumatic equipment needs to be relatively free of any moisture. The
moisture is removed by suing adsorbents or refrigerant dryers, or state of
the art heatless dryers.
ï Moisture Traps : Air traps are used for removal of moisture in the
compressed air distribution lines. They resemble steam traps wherein the
air is trapped and moisture is removed.
ï Receivers : Depending on the system requirements, one or more air
receivers are generally provided to reduce output pulsations and pressure
variations.
13. COMPRESSORCOMPRESSOR
What is Compressor?
A compressor is a device that pressurize a
working fluid, one of the basic aim of compressor is
to compress the fluid and deliver it to a pressure
which is higher than its original pressure.
PURPOSE
To provide air for combustion
To transport process fluid through pipeline
To provide compressed air for diving pneumatic
tools
To circulate process fluid through certain process
14. Types of compressor
Type of
compressor
Positive
displacement
Dynamic
Reciprocating Rotary Centrifugal Axial
16. Capacity of compressorCapacity of compressor
ïCapacity of Compressor basically
indicated by following two parameter
1.Pressure
2.FAD
17. What is FAD-What is FAD- Capacity of a Compressor?Capacity of a Compressor?
ïThe FAD is the volume of air drawn into a
compressor from the atmosphere. After
compression and cooling the air is returned to
the original temperature but it is at high
pressure
ïSuppose atmospheric condition are Pa Ta and
Va(the FAD) and the compressed condition are
p , V and T
18. Some definationsSome definations
ï Bore = Cylinder diameter.
ï Stroke = Distance through which the piston moves.
ï The two extreme positions of the piston are known as head-end
and crank-end dead centers.
ï Clearance Volume (Cl) : Volume occupied by the fluid when the
piston is
ï at head-end dead centre.
ï Piston Displacement (PD) : Volume, a piston sweeps through.
ï Compression Ratio (rv) : Ratio of cylinder volume with the piston
at crank-end dead centre to the cylinder volume with the piston at
head-end dead centre.
ï Mechanical Efficiency : which gives an indication of the
losses occurring between the piston and driving shaft.
19. CompressorCompressor Efficiency DefinitionsEfficiency Definitions
Isothermal Efficiency
Isothermal Efficiency =
Actual measured input power
IsothermalPower
Isothermal power(kW) = P1 x Q1 x loger/36.7
P1 = Absolute intake pressure kg/ cm2
Q1 = Free air delivered m3
/hr.
r = Pressure ratio P2/P1
20. CompressorCompressor Efficiency DefinitionsEfficiency Definitions
Volumetric Efficiency
3
Free air delivered m /min
Volumetric efficiency =
Compressor displacement
Compressor Displacement = Î x D2
x L x S x Ï x n
4
D = Cylinder bore, metre
L = Cylinder stroke, metre
S = Compressor speed rpm
Ï = 1 for single acting and
2 for double acting cylinders
n = No. of cylinders
22. Frame HN2T - 150NPFrame HN2T - 150NP
1Frame
Assly.
2Inner Head
Assly. (LP)
3Cylinder
Assly. (LP)
4Outer Head
Assly. (LP)
5Inner Head
Assly. (HP)
6Cylinder
Assly. (HP)
7Outer Head
Assly. (HP)
23. Frame, Cross Slide, Crank shaft andFrame, Cross Slide, Crank shaft and
Connecting rod assemblyConnecting rod assembly 1. Breather
22. Crosshead
23. Cross Head
Nut
35. Connecting
Rod
40.Big End
Bearing
36. Connecting
rod Bolt
28,29. Stud,Nut
24. Breather:Breather: A vent or valve to release pressureA vent or valve to release pressure
or to allow air to move freely aroundor to allow air to move freely around
something.something.
Crosshead: Is a mechanism used in large
 and reciprocating compressorsto eliminate
sideways pressure on the piston.
Connecting Rod: connects the piston to
the crank or crankshaft. Together with the
crank, they form a simple mechanism that
converts reciprocating motion into rotating
motion.
25. Crank CaseCrank Case
42. Belt wheel
13.Oil Seal Ring
18. Gasket for Cover
Flywheel end
34. Crank Shaft
25. Internal Circlip
24. Cross Head Pin
26.Cross Head Pin
43. Oil Cooler
8. Cover for Oil Pump
end
41. Oil Pump Assembly
44.Oil filter
12.Thrust washer
26. Oil Seal RingOil Seal Ring :It prevent the oil the:It prevent the oil the
oil to flow furtheroil to flow further
Gasket: is a mechanical seal which fills the space between
two or more mating surfaces, generally to prevent
leakage from or into the joined objects while underÂ
compression.
Circlip: It is a type of fastener or retaining ring
consisting of a semiflexible metal ring with open ends
which can be snapped into place, into a machined groove on a
dowel pin or other part to permit rotation but to
prevent lateral movement. There are two basic types: I
nternal and external, referring to whether they
are fitted into a bore or over a shaft.
27. Cross Head Pin : It connects the piston to the
connecting rod and provides a bearing for
the connecting rod to pivot upon as the
piston moves.
Thrust washer: Thrust washers are long-wearing flat
bearings in the shape of a washer that
transmit and resolve axial forces in rotating
mechanisms to keep components aligned
along a shaft.Â
Crank Pin/Gudgeon Pin: Connects the piston to the
connecting rod and provides a bearing for
the connecting rod to pivot upon as the
piston moves
29. PistonPiston Ring: Piston rings, mounted onRing: Piston rings, mounted on
the pistons of lubricated or non-lubethe pistons of lubricated or non-lube
(oil free) compressors, are designed to(oil free) compressors, are designed to
ensure that the gas is compressed andensure that the gas is compressed and
to provide a seal between the pistonto provide a seal between the piston
and the cylinder.and the cylinder.
Rider Ring:The function of
rider rings, used mainly in
oil free or mini-lube
compressors, is to support
or guide the piston and
rod assembly and prevent
contact between the
piston and the cylinder
(risk of seizure).
33. The total work interaction per cycleThe total work interaction per cycle
::
34. Chicago Pneumatic: For over a century ChicagoChicago Pneumatic: For over a century Chicago
Pneumatic has represented tough tools designedPneumatic has represented tough tools designed
to make tough jobs easier.to make tough jobs easier.
Way back in 1889 John W. Duntley realized that construction workers in
particular had a need for many tools that werenât yet available. He
founded Chicago Pneumatic Tool Company and set out on a lifelong
mission to provide all types of industries and companies the tools
necessary for their success.
Over the years Duntley grew the company through product innovation,
always insisting on product quality and reliability.
Manufactures of air & gas compressors & pneumatic portable tools like
grinders demolition tools, pumps vibrators, rammers hammers, etc.
Decades of innovation
1901Â Chicago Pneumatic Tool Company is incorporated, after Duntley
persuades young steel magnate Charles M. Schwabto invest in the
company
42. Terms to be familiar withTerms to be familiar with
ïImpeller-
transmit energy
to pressure
ïVolute- water
passes and
pressure is
increased
43. ï This machine consists of an IMPELLER
rotating within a case (diffuser)
ï Liquid directed into the
center of the rotating
impeller is picked up by
the impellerâs vanes and
accelerated to a higher velocity by the
rotation of the impeller and discharged by
centrifugal force into the case (diffuser).
Centrifugal PumpsCentrifugal Pumps
45. ï Head is a term for expressing feet of water column
ï Head can also be converted to pressure
"Head""Head"
100
feet
43.3 PSI
Reservoir
of Fluid
Pressure
Gauge
46. HeadHead
ïHead and pressure are interchangeable
terms provided that they are expressed
in their correct units.
ïThe conversion of all pressure terms into
units of equivalent head simplifies most
pump calculations.
47. Conversion Factors Between HeadConversion Factors Between Head
and Pressureand Pressure
ï Head (feet of liquid) =Pressure in PSI x 2.31 / Sp.
Gr.
ï Pressure in PSI = Head (in feet) x Sp. Gr. / 2.31
ï PSI is Pounds per Square Inch
ï Sp. Gr. is Specific Gravity which for water is
equal to 1
⊠For a fluid more dense than water, Sp. Gr. is
greater than 1
⊠For a fluid less dense than water, Sp. Gr. is less
than 1
48. Diameter of
the Impeller
Thickness
of the impeller
Centrifugal ImpellersCentrifugal Impellers
ïThicker the Impeller- More Water
ïLarger the DIAMETER - More Pressure
ïIncrease the Speed - More Water and Pressure
Impeller
Vanes
âEye of the
Impellerâ
Water
Entrance
49. Two-Stage Centrifugal PumpsTwo-Stage Centrifugal Pumps
ïTwo Impellers
within a single
housing
⊠Allow delivery in
Volume(parallel) or
Pressure (series)
51. Positive Displacement PumpsPositive Displacement Pumps
To move fluids positive displacement pumps admit a fixed volume of
liquid from the inlet into a chamber and eject it into the discharge.
Positive displacement pumps are used when higher head increases are
required. Generally they do not increase velocity.
56. Diaphragm Reciprocating pumps
Basic principle is similar to a reciprocating plunger pump/
Plunger pressurizes the hydraulic oil which when pressurized pushes the
diaphragm and discharge starts.
Stroke length can be adjusted and hence the dosing flow rate.
No direct contact of plunger with the solution.
Direct contact is only with diaphragm ( neoprene, Teflon etc)
57. DiaphragmReciprocatingpumps Figure 1: The air valve directs
pressurized air to the back side of
diaphragm "A". The compressed air is
applied directly to the liquid column
separated by elastomeric diaphragms.
The compressed air moves the
diaphragm away from the center block
of the pump. The opposite diaphragm is
pulled in by the shaft connected to the
pressurized diaphragm. Diaphragm "B"
is now on its air exhaust stroke; air
behind the diaphragm has been forced
out to atmosphere through the exhaust
port of the pump. The movement of
diaphragm "B" toward the center block
of the pump creates a vacuum within the
chamber "B". Atmospheric pressure
forces fluid into the inlet manifold
forcing the inlet ball off its seat. Liquid
is free to move past the inlet valve ball
and fill the liquid chamber.
58. DiaphragmReciprocatingpumps Figure 2: When the pressurized
diaphragm, diaphragm"A", reaches
the limit of its discharge stroke, the
air valve redirects pressurized air to
the back side of diaphragm "B". The
pressurized air forces diaphragm "B"
away from the center block while
pulling diaphragm "A" to the center
block. Diaphragm "B" forces the inlet
valve ball onto its seat due to the
hydraulic forces developed. These
same hydraulic forces lift the
discharge valve ball, forcing fluid
flow to flow through the pump
discharge. The movement of
diaphragm "A" to the center block of
the pump creates a vacuum within
liquid chamber "A". Atmospheric
pressure forces fluid into the inlet
manifold of the pump. The inlet valve
ball is forced off its seat allowing the
fluid being transferred to fill the
59. Diaphragm Reciprocating pumps
Figure 3: Upon completion of the
stroke, the air valve again redirects
air to the back side of diaphragm
"A", and starts diaphragm "B" on
its air exhaust stroke. As the pump
reaches its original starting point,
each diaphragm has gone through
one air exhaust or one fluid
discharge stroke. This constitutes
one complete pumping cycle. The
pump may take several cycles to
become completely primed
depending on the conditions of the
application.
60. Gear and screw
pumps
âąHigh pressure and viscous fluids
âąUsed in Samd for lube and seal oil
pumps air booster of ammonia, 102-
J
Reciprocating compressors are capable of giving large pressure ratios but the mass handling capacity is limited or small.
Air breather A device permitting air movement between the atmosphere and the component in/on which it is installed. A vent or valve to release pressure or to allow air to move freely around something.
Reciprocating Compressor has piston, cylinder, inlet valve, exit valve, connecting rod, crank, piston pin, crank pin and crank shaft. Inlet valve and exit valves may be of spring loaded type which get opened and closed due to pressure differential across them. Let us consider piston to be at top dead centre (TDC) and move towards bottom dead centre (BDC). Due to this piston movement from TDC to BDC suction pressure is created causing opening of inlet valve. With this opening of inlet valve and suction pressure the atmospheric air enters the cylinder. Air gets into cylinder during this stroke and is subsequently compressed in next stroke with both inlet valve and exit valve closed. Both inlet valve and exit valves are of plate type and spring loaded so as to operate automatically as and when sufficient pressure difference is available to cause deflection in spring of valve plates to open them. After piston reaching BDC it reverses its motion and compresses the air inducted in previous stroke. Compression is continued till the pressure of air inside becomes sufficient to cause deflection in exit valve. At the moment when exit valve plate gets lifted the exhaust of compressed air takes place. This piston again reaches TDC from where downward piston movement is again accompanied by suction. This is how reciprocating compressor. Keeps on working as flow device. In order to counter for the heating of piston-cylinder arrangement during compression the provision of cooling the cylinder is there in the form of cooling jackets in the body. Reciproting compressor described above has suction, compression and discharge as three prominent processes getting completed in two strokes of piston or one revolution of crank shaft.
Pumps come in a variety of sizes for a wide range of applications. They can be classified according to their basic operating principle as dynamic or positive displacement pumps In principle, any liquid can be handled by any of the pump designs. Centrifugal pump is generally the most economical but less efficient. Positive displacement pumps are generally more efficient than centrifugal pumps, but higher maintenance costs.