1. Time-series InSAR with DESDynI:Lessons from ALOS PALSAR Piyush Agrama, Mark Simonsa and Howard Zebkerb aSeismological Laboratory, California Institute of Technology bDepts of EE and Geophysics, Stanford University

2. Motivation InSAR time-series techniques crucial for many of DESDynI’s stated objectives - Geohazards, Hydrology and subsurface reservoirs Why ALOS PALSAR? L-band mission similar to DESDynI. Lifetime similar to DESDynI. ALOS PALSAR products – a good proxy for DESDynI products.

3. Overview Noise levels at L-band vs C-band. Topography related artifacts PS-InSAR at L-band Novel time-series techniques: MInTS.

4. Comparison of Noise Levels Typical resolution of interest – 100m x 100m. Analysis of filtered interferograms with shortest time span. ERS vs ALOS PALSAR. Experiments conducted over the San Francisco Bay Area.

5. L-band 46 day correlation similar to C-band at 1 day ERS Looks = 80. ALOS Looks = 336. Factor of 2 gain. Factor of 2 observed in InSAR data. L-band Decorrelation at 45 days ~ C-band decorrelation at 1 day Areal coverage similar. ALOS coherence threshold = 0.7 . ERS coherence threshold = 0.7.

7. Factor of 2 gain in phase noise due to coherence threshold.

8. Temporal decorrelation at L-band is significantly lower.Areal coverage similar. ALOS coherence threshold = 0.7 . ERS coherence threshold = 0.4.

11. ALOS and topo-related errors Parkfield, CA Due to orbit drift, correlation between Bperp and temporal baseline is 0.7. DEM error cannot be distinguished easily from deformation features (SBAS).

12. PS-InSAR at L-band with ALOS Not as straight-forward as at C-band due to sensor management. ALOS PALSAR – Need to combine different imaging modes. Different noise characteristics of FBD and FBS modes. Need appropriate weighting of the modes when selecting PS. Does work: example over Long Valley Caldera, CA.

13. Long Valley Caldera PS pixel mask for ALOS PALSAR C-band image from Hooper et al (2004) 23 ALOS PALSAR images with baselines < 4 Km. PS density is similar to C-band. Fine tuning needed for handling different modes. Velocities heavily contaminated by topo-related errors.

14. Implications for DESDynI Plan no systematic relationship between temporal and spatial baselines. L-band allows us to implement simple SBAS/ linear inversion approach more reliably due to better coverage. Other topo-related errors - like tropospheric delay - at same level as ALOS PALSAR. Traditional time-series approaches like SBAS and PS-InSAR should work better for DESDynI than ALOS.

15. Novel time-series techniques will improve over current methods In many situations, deformation estimates at 500m x 500m suffices to model geophysical phenomenon. Can exploit the spatially correlated nature of deformation at these spatial scales. Can decompose the data into independent components at various spatial scales- e.g, wavelets. Multiscale InSAR time-series (MInTS) developed by Hetland and Simons.

16. Multiscale InSAR Time Series (MInTS) Create Interferograms Unwrapped phase Coherence Time-series products Reconstruct data using inverted coefficients Create data mask for each IFG and interpolate holes Compute wavelet coefficients and Weights for each IFG Invert wavelet coefficients using temporal model (similar to GPS)

18. Same stack of 84 IFGs used for SBAS and MInTS.

20. Better orbital control and plan significantly decreases uncertainties in deformation estimates due to topo-related errors.

21. Uncertainty in deformation time-series will match current C-band products but yield much greater spatial coverage.

22. Novel time-series techniques like MInTS can significantly improve deformation estimates over regions where traditional techniques like SBAS and PS fail.