2. Take a look at the old technology:
A typical cylindrical implant
(designed in times when
steam locomotives were on the rails),
with so many disadvantages
3.
4. ... to make it short:
Implants of this type do not meet
the demands of the patients at all,
and actually they do not meet the
demands of the treatment
providers either
5. The two implant types shown here, do the job
much better:
BOI/TOI and BCS/GBC: „Basal implants “
have been specificly designed for
immediate loading, and for immediate
and long-lasting satisfaction of the
patient
6. And here is why this is so:
BOI®
Lateral basal implant: the implant is
inserted from the lateral aspect of the jaw
bone. It requires minimal bone heights of
3mm. This means:
-Virtually every patient can be treated
without bone augmentation
-Because bone augmentation is avoided,
also risk groups, such as smokers and
diabetics, can be treated
-Strictly cortical anchorage of the implant
guarantees for safe load transmittion and
osseo-integration
7. ... Also the screwable „brother“ of the BOI has many advantages:
BCS®
Screwable basal implant: the implant is
inserted like a conventional imlpant, but it
transmits loads only into the opposing
cortical. This means:
-Virtually every patient can be treated
without bone augmentation
-Because bone augmentation is avoided,
also risk groups, such as smokers and
diabetics, can be treated
-Strictly cortical anchorage of the implant
guarantees for safe load transmittion and
osseo-integration
8. Advantage No. 1:
Safe load transmission in the basal bone
Infection
attacks
here
Basal implant: load transmission is Conventional implant:
deep in the infection free basal bone. load transmission is
Thats THE big advantage. near the area of
bacterial attack. Thats
bad.
9. Advantage No. 2: Thin and polished mucosal
penetration diameter: no peri-implantitis &
no bone loss!
1.9 – 2.1 mm 2.8 – 6 mm
10. This results in:
- Avoiding risky bone augmentations completely
- Avoiding the time delay caused by bone
augmentations
11. This results in:
- No intermediate dentures, no edentulous phase
- No secondary operations
- Extremely good patient acceptance
12. - Extractions and implant placements on the same
appointment and immediate placement of at least a
provisional bridge. Patients are never without teeth
- Even if periodontal involvement is present, BOI and
BCS implants can be placed immediately after the teeth
and infected tissues have been removed
13. BOI & BCS implants provide thin and polished mucosal
penetration diameters. They are virtually infection-
free. Hence the demand for the patient`s cleaning effort
and compliance is reduced to an absolute minimum
Nevertheless regular controll appiontments and
adjustments of the mastictory surfaces are necessary
14. - Cortical bone is resorption resistant and ready to perform
from day 1 on
- Cortical bone is resistant to infections due to its high
mineralisation
15. - Avoids hassles of the „emerging profile“-technology
- Small surgical errors in implant positioning don`t
threaten the aesthetic result
- Position of implants and prosthetics may differ
Results:
- Even skelettal discrepances can be compensated easily
- Teeth may be positioned in regions where no bone is
present. This avoids augmentations.
16. - the thin but well designed implant body allows good
bone healing and osteonal remodelling
- On the polished implant surfaces no intermediate
formation of woven bone is necessary: these surfaces are
integrated right away
Result:
- the bone heals uneventfully, as if there was no implant
present
22. - More than 15 years of clinical
experience in basal implantology
-Thousands of patients treated
successfully
-Author and co-author of four
textbooks and more than 50
articles
Prof. Dr. Stefan Ihde
-Many years of worldwide
teaching experience
Get professional supervising for your clinic @:
ihde@ihde.com