hi just gothrough the presentation of our company products

1. WELCOME TO SEMINAR On JK PRODUCTS

2. JK White Cement Product Portfolio Your Smile.. Our Satisfaction

3. J K WHITE CEMENT Gotan , Rajasthan

5. ISO – 9001:2000and 14001 Certified Company by LRQA

6. OHSAS 18001: 2005 For safety and environmental upkeep

7. Quality control by FUZZY Logic & QCX which control the RMP( Raw Mill Proportionate) for the consistency of White Cement

8. Innovator for new technology and energy conservation

10. PRODUCTION CHART

11. JK White CementUsage Flooring with White cement Walls with White cement Plastering Decorative/Utility Architectural Your Smile.. Our Satisfaction

12. Flooring with ..JK White Cement(Under bed for marble) Your Smile.. Our Satisfaction Marble Being Translucent will reflect part of the background. Hence a white base will Enhance the whiteness of the Marble which Can Be Achieved using JK White Cement

14. Designs

15. Durability ,dense

16. Water tight

17. Hard wearing surface

19. Wide variety of patterns

22. For interiors and exteriors

24. Plaster with .. JK White Cement Your Smile.. Our Satisfaction Textured Plaster Textured coating applied on exterior for decoration & protection. Texture is made by chiseling.( Malad Stone) Variety of colors with pigment addition to white cement Plain Plaster Plain plaster without any texture. Variety of colors with pigment addition to white cement. Plastering is done on grey cement plaster surface which is made rough by combing Roller Finished Plaster Special textured rollers are used to give textured & uniform pattern. Immense design variation possibilities. Variety of colors with pigment addition to white cement.

26. Sponge patterns varies with applied pressure and hardness of sponge

27. Various colors with pigment addition

29. Applied on terrace, parapet walls, swimming pools

31. Also on columns & floors

35. White or colored panels with different designs and patterns joined together at site to speed up construction

36. Equipment is needed to handle and place the panels

37. Panels of any size and can be smooth or textured as desired.

38. Pillars , Jhalis ,Stone finishes , etc available at a lower cost and in your desired Colour

40. TYPES OF WALL PUTTY JK HAS JK WALL PUTTY (FINE) JK WALL PUTTY ( COARSE)

42. For luxurious and silky interior/exterior finish

43. Good adhesion with Plastered wall ( Cement to Cement Adhesion)

44. No primer

45. No Flaking and long life

47. Advantages Over Traditional Putty (POP)

48. Properties Your Smile.. Our Satisfaction Transverse Strength - 1.7 Kg/cm2 Compressive Strength - 37 Kg/cm2 ( 28 days) Whiteness Index - 93% (28 days) Pot life - 180 Minutes Water demand by volume - 35 to 40 % Surface hardness - 3.0 N Maximum thickness of total - 1.5- 2.5 mm coats Coverage - 15 Sq Feet/Kg in 2 coats* Subject to wall condition /Roughness and usage

49. JK COARSE PUTTY USED IN UNDULATED SURFACE THICKNESS – 4 MM MINIMUM MICRO SAND INCLUDED IN THIS PUTTY SPECIAL PRODUCT AVAILABLE IN 20 KG BAGS. FINAL FINISH WITH FINE PUTTY ONLY. WIDELY USED IN TEXTURE FINISHES IN ELEVATIONS. CAN GO UPTO 8MM THICKNESS IN 2 COATS.

50. JK WALL PUTTY.. Surface Preparation Your Smile.. Our Satisfaction Surface Preparation The surface should be cleaned to make it free from dirt, dust, grease, oil and paint. All foreign impurities should be removed with a wire-brush. Wall surfaces should be cured so that the surface is saturated with water yet in ‘touch dry’ condition. Treatment of New Surface The new surface requires only soft treatment such as removal of dust, dirt and foreign matter. In case of cracks, voids and damages; it should be patched up prior to application of J. K. Wall Putty with grey/white cement. Treatment of Old Surface All loose material and/ or organic growth must be removed with Putty blade or brush. In case of old painted surface scrub the surface with coarse emery stone/paper.

51. JK WALL PUTTY.. Application Your Smile.. Our Satisfaction Preparation of J.K. Wall Putty Paste J. K. Wall Putty is a fine powder. Mix slowly J. K. Wall Putty with approx. 40% water by volume to prepare paste of desired consistency. Mix vigorously for 5-10 minutes for making lump free, uniform and smooth putty paste. Product should be mixed in required quantities to be used within 2-3 hrs of its preparation. Application Apply uniformly the first coat of J.K. Wall Putty with blade/trowel on the wall from bottom to top. Apply second coat after the first coat has dried completely(Min 6 hrs). Limit the total thickness of 2 coats to 2.5 mm. Allow complete drying and then use fine emery paper to remove the application mark if any. Any kind of paint can be applied on this surface. Use water for curing before applying paint. Precaution Although J.K. Wall Putty does not contain any toxic material, use rubber gloves while mixing, as prolonged exposure with water may soften the skin resulting in fine cuts/legions due to cement particles. Precaution should be taken to avoid dust inhalation while handling the powder putty. Storage Store J.K. Wall Putty in a dry place and open the pack just before use. Keep out of reach of children.

52. Third Party Certification Your Smile.. Our Satisfaction The Authentication… NCCBM Certification

54. Pharma Industry

55. Uttar Pradesh State Building Corporation

56. Unitech

57. Marathon

58. Merlin

59. Shipra

61. L&TPROJECT-COGNIZANT MEPZ AREA-25LACS SQFT ARCHITECT- Mr.Karthikeyan & Nagalingam. CONTRACOR-OVIYAS LOCATION-TAMBARAM SANITORIUM, CHENNAI

63. CEEBROS PROPERTIES&DEVELOPMENTPROJECT-CEEBROS HOTELSArea-10 LACS SqftNANDANAM, CHENNAI

64. SOUTH INDIAN SHELTERSPROJECT-SAFAAAREA-7.50 LACS SQFTCONTRACTOR-ABSOLUTE MKTGARCHITECT- Akbar Hussain AkbariLOCATION-GUDUVANCHERY, OUTSKIRTS CHENNAI

65. SRM UNIVERSITYAREA-10 LACS SQFTLOCATION-VANDALORE, OUTSKIRTS CHENNAI

66. ARUNEXCELLOPROJECTECSTANCIAAREA-50 LACS SqftCONTRACTORSROYAL DESIGNS&SAIRAM CORPORATIONARCHITECT-NATRAJ&VENKATVELLANCHERRY, OUTSKIRTS CHENNAI

67. EMAARPROJECT-MGF EMAAR AREA-7 LACS SQFTCONTRACTOR-OVIYASARCHITECT-CHAKRAPANIatTONDIARPET, CHENNAI

68. EXPRESS INFRASTRUCTUREEXPRESS AVENUEContractor - Mr. Phillip of IN-DECORS, Exteriorat MOUNT ROAD, CHENNAI

70. NAVINHOUSING, DAYTONHEIGHTS Area-6.5 Lac sqft, Architect Mr.W.Anand, at Nelson Manickam Road Chennai, Contractor Mr.Gandhi of G-ENTERPRISES

71. Some Testimonials Your Smile.. Our Satisfaction

72. Putty Finishes Interiors Your Smile.. Our Satisfaction

73. Putty Finishes Exterior Your Smile.. Our Satisfaction

74. JK Water Proofing Compound Your Smile.. Our Satisfaction

76. Your Smile.. Our Satisfaction J.K. Waterproof reacts with alkalis in the concrete forming a highly water-repelling compound in the capillaries and throughout the concrete or mortar. In this way, the surface tension, which would normally draw water into the capillaries and micro cracks does not take place and does not allow propagation of Moisture How does it Work?

78. Strength to be >90% of Neat cement 3 Day strength

79. Setting time –Reduction of setting time should not be >25% of Neat Cement

80. Water Permeability should be <50% of Neat Cement

81. Chloride test should be < 2%JK Water Proofing more than meets the BIS Specifications and is IS Certified( IS 4410 ??)

82. Your Smile.. Our Satisfaction Mixing Ratio Mixed with cement in a ratio of 2% by weight ( 1kg for every 50 kg Bag)

84. Mercury Test

86. THANK YOU.. Any Questions Please….