Recomendados
Más contenido relacionado
Similar a Estrat. tutoria virtual
Similar a Estrat. tutoria virtual (20)
Estrat. tutoria virtual
- 1. Curso: TUTORÍA EN ENTORNOS TUTORÍA EN ENTORNOS VIRTUALES VIRTUALES Tema: ESTRATEGIAS DE SEGUIMIENTO Y ACOMPAÑAMIENTO EN TUTORÍA VIRTUAL Participante: Donald QUISPE CAPCHA Grupo: 05 Tutora: Ingrid Leslie ROMERO MANCO
- 2. FASES EN EL PROCESO DE TUTORÍA VIRTUAL De manera general, el proceso acompañamiento en tutoría, se divide en tres faces:
- 3. FASE INICIAL Se caracteriza por :
- 4. FASE DE DESAROLLO Se caracteriza por :
- 5. FASE DE FINALIZACIÓN Se caracteriza por :
- 6. ESTRATEGIAS DEL TUTOR EN LA FASE INICIAL 1 2 3 BIOGRAFÍA PRESENTACIÓN PRESENTACIÓN DIGITAL DE LOS AMIGABLEMENTE DEL CURSO PARTICIPANTES El tutor debe presentarse El tutor debe explicar de Promover a que los amigablemente, promoviendo manera sencilla, como se va a estudiantes publiquen su que el participante también lo desarrolar el curso, sin entrar biografia digital para que todos haga, en lo posible señalando en detalles, dar un mapa los miembros conozcan más sus intereses y motivaciones general del curso, así como los acerca de él hacia el curso. objetivos que se quieren lograr. Intercambiar direcciones de Debe usar frases alentadoras Dar a conocer el cronograma cuentas de correo, facebook, para el desarrollo del curso y del curso y ser explicito en las tweeter, etc. para poder mostrarse optimista respecto a fechas de entrega de trabajos, interconectarse en las redes la participación de los participación en foros, sociales. estudiantes. resolución de cuestionarios, etc..
- 7. ESTRATEGIAS DEL TUTOR EN LA FASE DE DESARROLLO 3 UTILIZAR EL ESTRATEGIAS DE INTERACCIÓN SENTIDO DEL MOTIVACIÓN MÁS PERSONAL HUMOR Siempre usar frases de Crear un clima ameno, aliento y motivadoras. con un buen sentido del Establecer contacto con humor. los participantes por Siempre rescatar lo otros medios, como el positivo de la participación Bromear sin llegar al facebook, tweeter, en foros, chats y trabajos. abuso con los participante. correo electronico linea telefónica, etc. Felicitar al participante por Usar ciertas frases para sus trabajos creativos y aliviar la tensión sobre por su ánimo de algún tema. compartir.
- 8. ESTRATEGIAS DEL TUTOR EN LA FASE DE DESARROLLO 6 INTRODUCIR SIMULAR USAR JUEGOS Y HISTORIAS Y SITUACIONES ACTIVIDADES ANECDOTAS REALES En la medida que lo Una Buena historia nunca esta Proponer situaciones permita el tema, proponer demas, una anecdota del tutor, conflictivas, para que cuando era participante juegos y actividades que se el participante pueda tampoco. relacionen con el. evaluarlas y tomar Escoger una metafora para decisiones sobre ellas. Proponer direcciones web compartir con los donde el participante participantes, de tal manera puede encontrar que lo motive a seguir avanzando actividades lúdicas y de extensión
- 9. ESTRATEGIAS DEL TUTOR EN LA FASE DE DESARROLLO PRÁCTICAS UTILIZAR LAS 9 CREACIÓN DE GENERADORAS NUEVAS GLOSARIOS DE HERRAMIENTAS COLABORATIVOS CONOCIMIENTO TECNOLÓGICAS Proponer actividades para Plantear conceptos y Cada vez, la tecnologia y que el participante plasma pedirles a los participantes los recursos sus ideas, aporte a los que enriquezcan su informaticos avanzan contenidos de un curso, significado, añadiendo vlozmente, aprovechar toda participacion creative aportes segun su al maximo esos es valida. experiencia personal y recursos para mejorar practica. un trabajo y Proponer preguntas para enriquecer al qu el participante participante. investigue y de sus opinions y aportes al respecto.
- 10. ESTRATEGIAS DEL TUTOR EN LA FASE DE FINALIZACIÓN INFORMACIÓN 3 CLARA Y CREACION DE CREACIÓN DE PRECISA SOBRE UN MAPA UN DIARIO LA CONCEPTUAL FINALIZACIÓN Felicitar a los participantes Promover la creacion y Promover la creación y por el trabajo realizado e publicación de un mapa publicación de un diario informarlos sobre la ultima mental, conceptual o de tal manera que el etapa del curso. alguna organizador grafico participante muster qu le Cronograma, actividades, donde se resuma los parcio el curso, como se evaluaciones, etc. aspectos significativos e sintio y si l apoyo del importantes del curso. tutor le ayodo en su desarrollo personal
- 11. REFERENCIAS BIBLIOGRÁFICAS BIBLIOGRAFICAS 1.- Estrategias y acciones metodológicas del tutor virtual. http://tecnologiaedu.us.es/dipro2/images/stories/M11/PDF/pdf_2/page_01.htm 2.- Estrategias Didácticas creativas en entornos virtuales para el aprendizaje http://revista.inie.ucr.ac.cr/uploads/tx_magazine/virtuales.pdf 3.- Lecturas del modulo http://aulavirtual.perueduca.pe/course/view.php?id=24§ion=5
Notas del editor
- Animated SmartArt vertical list (Intermediate) To reproduce the SmartArt effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click SmartArt . In the Choose a SmartArt Graphic dialog box, in the left pane, click List . In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles. Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time. Select the SmartArt graphic. Under SmartArt Tools , on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left). Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill , and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left). Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left). Select the top, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left). Select the center, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left). Select bottom, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left). Press and hold CTRL, and select each of the second-level rectangles. On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left). Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects , then point to Shadow , and under Outer , click Offset Diagonal Bottom Right . To reproduce the animation effects on this slide, do the following: On the Animation tab, in the Animation group, click Animation Pane . Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects . In the Change Entrance Effect dialog box, under Exciting select Curve Up , and click OK . In the Animation group, click Effect Options , and under Sequence , click One by One . In the Timing group, do the following: On the Timing tab, in the Start list, select After Previous . On the Timing tab, in the Duration list, select 01.00 . In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects. Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects . In the Change Entrance Effect dialog box, under Basic , select Peek In , and click OK . In the Animation group, click Effect Options , and under Direction , click From Top . In the Timing group, do the following: In the Start list, select With Previous . In the Duration list, select 01.00 . To reproduce the background effects on this slide, do the following: Right-click the slide background, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial . In the Direction list, click From Center (third option from the left). Under Gradient stops , click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 33% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, the first option from the left). Select the last stop on the slider, and then do the following: In the Position box, enter 100% . Click the button next to Color , and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
- Animated SmartArt vertical list (Intermediate) To reproduce the SmartArt effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click SmartArt . In the Choose a SmartArt Graphic dialog box, in the left pane, click List . In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles. Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time. Select the SmartArt graphic. Under SmartArt Tools , on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left). Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill , and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left). Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left). Select the top, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left). Select the center, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left). Select bottom, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left). Press and hold CTRL, and select each of the second-level rectangles. On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left). Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects , then point to Shadow , and under Outer , click Offset Diagonal Bottom Right . To reproduce the animation effects on this slide, do the following: On the Animation tab, in the Animation group, click Animation Pane . Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects . In the Change Entrance Effect dialog box, under Exciting select Curve Up , and click OK . In the Animation group, click Effect Options , and under Sequence , click One by One . In the Timing group, do the following: On the Timing tab, in the Start list, select After Previous . On the Timing tab, in the Duration list, select 01.00 . In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects. Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects . In the Change Entrance Effect dialog box, under Basic , select Peek In , and click OK . In the Animation group, click Effect Options , and under Direction , click From Top . In the Timing group, do the following: In the Start list, select With Previous . In the Duration list, select 01.00 . To reproduce the background effects on this slide, do the following: Right-click the slide background, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial . In the Direction list, click From Center (third option from the left). Under Gradient stops , click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 33% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, the first option from the left). Select the last stop on the slider, and then do the following: In the Position box, enter 100% . Click the button next to Color , and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
- Animated SmartArt vertical list (Intermediate) To reproduce the SmartArt effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click SmartArt . In the Choose a SmartArt Graphic dialog box, in the left pane, click List . In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles. Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time. Select the SmartArt graphic. Under SmartArt Tools , on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left). Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill , and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left). Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left). Select the top, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left). Select the center, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left). Select bottom, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left). Press and hold CTRL, and select each of the second-level rectangles. On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left). Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects , then point to Shadow , and under Outer , click Offset Diagonal Bottom Right . To reproduce the animation effects on this slide, do the following: On the Animation tab, in the Animation group, click Animation Pane . Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects . In the Change Entrance Effect dialog box, under Exciting select Curve Up , and click OK . In the Animation group, click Effect Options , and under Sequence , click One by One . In the Timing group, do the following: On the Timing tab, in the Start list, select After Previous . On the Timing tab, in the Duration list, select 01.00 . In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects. Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects . In the Change Entrance Effect dialog box, under Basic , select Peek In , and click OK . In the Animation group, click Effect Options , and under Direction , click From Top . In the Timing group, do the following: In the Start list, select With Previous . In the Duration list, select 01.00 . To reproduce the background effects on this slide, do the following: Right-click the slide background, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial . In the Direction list, click From Center (third option from the left). Under Gradient stops , click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 33% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, the first option from the left). Select the last stop on the slider, and then do the following: In the Position box, enter 100% . Click the button next to Color , and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
- Animated SmartArt vertical list (Intermediate) To reproduce the SmartArt effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click SmartArt . In the Choose a SmartArt Graphic dialog box, in the left pane, click List . In the List pane, click Vertical Block List (sixth row, first option from the left), and then click OK to insert the graphic into the slide. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each of the rectangles. Press and hold CTRL, and select each of the second-level rectangles on the slide. Drag the left sizing handle of one of the second-level rectangles to the left 0.5” to increase the width of the second-level rectangles. Note: The first-level rectangles (rounded rectangles) will decrease in width at the same time. Select the SmartArt graphic. Under SmartArt Tools , on the Design tab, in the SmartArt Styles group, click the More arrow at the SmartArt Styles gallery, and under Best Match for Document select Intense Effect (fifth option from the left). Press and hold CTRL, and then select each of the first-level rectangles (rounded rectangles) in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Fill , and under Theme Colors select White, Background 1, Darker 25%. (fourth row, first option from the left). Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select White, Background 1 (first row, first option from the left). Select the top, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3. (first row, seventh option from the left). Select the center, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 40% (fourth row, seventh option from the left). Select bottom, second-level rectangle in the SmartArt graphic. Under SmartArt Tools , on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Fill and under Theme Colors select Olive Green, Accent 3, Lighter 60% (third row, seventh option from the left). Press and hold CTRL, and select each of the second-level rectangles. On the Home tab, in the Font group, in the Font Color list select White, Background 1 (first row, first option from the left). Under SmartArt Tools , on the Format tab, in the WordArt Styles group, click the arrow to the right of Text Effects , then point to Shadow , and under Outer , click Offset Diagonal Bottom Right . To reproduce the animation effects on this slide, do the following: On the Animation tab, in the Animation group, click Animation Pane . Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Effects . In the Change Entrance Effect dialog box, under Exciting select Curve Up , and click OK . In the Animation group, click Effect Options , and under Sequence , click One by One . In the Timing group, do the following: On the Timing tab, in the Start list, select After Previous . On the Timing tab, in the Duration list, select 01.00 . In the Animation Pane, click the double arrow under the curve up entrance effect (first effect) to expand the list of effects. Press and hold CTRL, and select the second, fourth, and sixth effects (curve up entrance effects). On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and click More Entrance Effects . In the Change Entrance Effect dialog box, under Basic , select Peek In , and click OK . In the Animation group, click Effect Options , and under Direction , click From Top . In the Timing group, do the following: In the Start list, select With Previous . In the Duration list, select 01.00 . To reproduce the background effects on this slide, do the following: Right-click the slide background, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial . In the Direction list, click From Center (third option from the left). Under Gradient stops , click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 33% . Click the button next to Color , and then under Theme Colors click White, Background 1 (first row, the first option from the left). Select the last stop on the slider, and then do the following: In the Position box, enter 100% . Click the button next to Color , and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
- For reproduction steps for this slide, refer to the PowerPoint template titled “ Combined picture and text effects for PowerPoint slides ” (ANI_TEXT.potx), slide number 8.
- For reproduction steps for this slide, refer to the PowerPoint template titled “ Combined picture and text effects for PowerPoint slides ” (ANI_TEXT.potx), slide number 8.
- For reproduction steps for this slide, refer to the PowerPoint template titled “ Combined picture and text effects for PowerPoint slides ” (ANI_TEXT.potx), slide number 8.
- For reproduction steps for this slide, refer to the PowerPoint template titled “ Combined picture and text effects for PowerPoint slides ” (ANI_TEXT.potx), slide number 8.
- For reproduction steps for this slide, refer to the PowerPoint template titled “ Combined picture and text effects for PowerPoint slides ” (ANI_TEXT.potx), slide number 8.