1. momit Smart Thermostat
Thermostat installation guide

2. To open momit ST, introduce the flat screwdriver tip in the openings that you fill find at the bottom of the device.
Press gently pry openings. Realize a hinge movement to finish opening the thermostat housing without forcing the connec-
tion pins.
Opening the case of momit
Remove the back of the case. There you will see positions of the wires market from your heating and / or air conditioning.
You will also see several openings in which the fixations of the thermostat will be fixed to the wall.

3. In here you are can identify the wiring diagram marked on the clamps.
C W C2 Y L N
heating A/C power
heating heating A/C
Wiring diagram:
2 2 2

4. With the help of a screwdriver put the wires in the right position, considering the marks you will see inside the box.
Through the center hole of the back of the case you have to introduce ST momit wires from your previous installation or,
alternatively, those who come preinstalled on a thermostat in your home.
Take the front side of momit ST. You will see that on the top there are two projections which with the rear of the case will
hinge. Place properly and support the rest of the thermostat by pressing it gently. Keep pressing until they the tabs of the
bottom of the case have make a sound a sign that it has engaged properly
Closure of the momit ST