2. Brief Introduction
NATIVE POWER TECHNOLOGY CO., LTD IS A LEADING
NEW TECHNOLOGY PROVIDER OF NATURAL GAS CONVERSION
SYSTEM, BI-FUEL SYSTEM, GENERATOR PERFORMANCE,
CONTROLLER FOR THE SAFETY AND WE MAINLY SUPPLY THE
NATURAL GAS LINE PIPE AND REGULATOR, CONTROL AND
MEASURING SYSTEM EQUIPMENTS, FILTERATION SKID, LPG
FILLING PLANT AND TERMINAL EQUIPMENTS SUPPLY AND
INSTALLATION RELATED TO OIL AND GAS INDUSTRIES. SINCE
NATIVE POWER TECHNOLOGY CO.,LTD WAS ESTABLISHED IN
2009.IT HAS BEEN ENGAGED IN OIL AND GAS FIELD. AS AN
ENERGY SERVICE SUPPLIER,OUR ENGINEERING TEAMS MAKE
SURE IN GIVING THE SAFETY AND EXPERT JOB EXPERIENCE
SERVICES.
3. No.38,Waizayantar St,Ward(9),
South Okkalapa Township,
Yangon,Myanmar
Office Tel : 95-1-566187
Office Fax: 95-1-560986
Email : infonative.mm@gmail.com
Website : www.nativepowertechnology.com
5. What is Bi-Fuel®?
• Bi-Fuel® is a “co-firing” of standard
diesel fuel and natural gas
(methane)
• It is designed for use on
conventional, heavy-duty diesel
engines
• No engine modifications are
required
• The GTI Bi-Fuel® Systems can be
installed in the field or
accomplished as an OEM up-fit
• Natural gas typically substitutes
up to70% of the diesel fuel
required to maintain a given
speed and load
6. Primary Applications
• Prime power
• Peak shaving
• Standby power
• Distributed power
generation
• Pumping
applications
• Compressors
• Drillrigs & Fracing
7. Characteristics of the
GTI Bi-Fuel® System
• Maintains diesel-like performance and
efficiency
• Compression ignition
• Low gas supply pressure
• Sophisticated Altronic engine protection
system
• Auto-switching of fuel modes
• Non-intrusive, simple installation
• Easy to operate
9. Benefits to the User
• Reduced energy costs
• Interruptible gas and
electric rates
• “Fuel flexibility”
• Reduced exhaust
emissions
• Rapid payback
• Extended run-time for
emergency operation
10. Specific Advantages of Bi-Fuel®
Operation for Stand-By Service
• Extended run-time vs. amount of fuel stored
• Reduced exposure to environmental
liabilities (smaller or above-ground diesel
storage tanks)
• Reduced utility costs for both gas and
electricity by qualifying for interruptible rates
• Decreased visual emissions during system
testing/validation
11. Extended Run-Time with the
GTI Bi-Fuel® System
• 100% Diesel vs. GTI Bi-Fuel® Run-Time
on a 1000KW load
– Diesel Fuel Rate: 54 gallons/hour
– Fuel Storage Capacity: 1500 gallons
– 100% Diesel Run-Time: 28 hours
– Bi-Fuel® Gas Substitution Rate: 70%
– 70% Gas Run-Time: 93+ hours
12. Bi-Fuel®-Equipped Diesel Engines vs.
Dedicated Gas Engines
• Lower initial
cost
• “Fuel flexibility”
• Higher
efficiency
• Reduced O&M
costs
• Smaller physical
“footprint” vs.
output
13. Fuel Gasses Compatible with the
GTI Bi-Fuel® System
• Pipeline natural gas
• Liquid natural gas
(LNG)
• Compressed natural
gas (CNG)
• Wellhead gas*
• Bio-gas (landfill,
wastewater)*
• Coal-bed gas*
*With proper pre-treatment
14. Bi-Fuel® System Kits/Ratings
• Series A Kit
- For engines up to 175kW (up to 225 HP)
• Series I Kit
– For engines from 250-300kW (300-400 HP)
• Series II Kits
– For engines from 350-600kW (450-800 HP)
• Series III Kits
– For engines from 650-1100kW (850-1500 HP)
• Series IV Kits
– For engines from 1200-3000kW (1600-4000 HP)
• Special Applications
16. GTI Bi-Fuel®® Control Systems
• Monitors critical
parameters, such as:
– Exhaust
temperatures
– Intake air
temperatures
– Upstream gas
pressure
– Downstream gas
pressure
– Engine manifold
pressure
– Engine vacuum
– Vibration
Series 1000 Control
System for Series I
and II Kits
Series 2000
Control System
for Series III and
IV Kits
Series 0100 Control
System for Series A Kits
17. GTI Bi-Fuel® System
Air-Gas Mixer
• Low air restriction
• Fixed venturi –
no throttle
• No moving parts
• CNC-machined from
T6 aluminum
• Anodized finish for
corrosion resistance
18. GTI Bi-Fuel® System
Power Valve
• Fixed adjustment
• Single and dual turbo
designs
• Designed to control the
maximum gas flow
• Individual adjustments on
dual turbo power valve
used for bank-to-bank
balancing
• Machined from T6
aluminum and anodized
for corrosion resistance
Dual Gas Power Valve
In-line Gas Power Valve
19. GTI Bi-Fuel® System
Gas Train
• State-of-the-art
design
• DC-powered
• Valve proving
system
• 50 micron gas
filtration Gas
Filter
Zero
Pressure
Regulato
r
Gas
Solenoid
Valve
Gas
Power
Valve
21. The impact of the GTI Bi-Fuel® System
and an SCR (Selective Catalytic Reduction) Catalyst
on NOx
NOX LEVELS
6
4
0.7
0
1
2
3
4
5
6
7
DIESEL BI-FUEL BI-FUEL & SCR
GMS/BHP-HR
22. GTI –Altronic Statement
• Subject: GTI Bi-Fuel Emissions
• Conversion of any diesel engine to GTI Bi-Fuel will generally
provide for reductions in harmful emissions. The extent of these
emissions reductions will depend on a number of factors
including age and condition of the engine, engine make and
model, load factor, diesel injection system design, as well as the
quality and composition of the supplied natural gas. In general
terms, GTI Bi-Fuel will reduce NOx, NMHC (non-methane
hydrocarbons), SOx, PM and opacity. Note that NMHC and Nox
are ozone precursor emissions; these emissions react in the
presence of sunlight to form ozone (smog). Bi-fueled diesel
engines will typically have 20% to 50% lower ozone pre-cursor
emissions. Additionally, pipeline quality natural gas has little or
no sulfur content and as such, converted engines will typically
produce 50% to 80% less SOx compared to 100% diesel
operation.
• While the above listed benefits do generally occur, the degree to
which this happens will vary from engine model to engine model,
as well as from engine to engine within the same engine model
class.
23. GTI –Altronic Statement
• Based on a broad experience with the GTI Bi-Fuel System,
we are confident that operation of gensets on Bi-Fuel will
produce emissions reductions in the following ranges:
• 1. NOx: 10% - 30% decrease
• 2. HC (reactive): 20% - 80% decrease
• 3. PM-10: 20% - 50% decrease
• 4. Opacity: 30% - 50% decrease
• 5. SOx: 50% - 70% decrease.
24. GTI –Altronic Statement
• CO output will increase during Bi-Fuel operation as well as
the total hydrocarbon (THC) output. If the lowest possible
CO and THC output are desired, a 2-way catalysts can be
used which will decrease these emissions approximately
70% - 90%, depending on load factor.
• The numbers and percentages listed in this document
should not be used for quoting purposes or looked at as a
specification. This document is for general purpose
information only.
25. The Bi-Fuel® System Cost Advantage
0
100
200
300
400
500
600
700
800
$/Kw
RETRO PACKAGE TURN-KEY
BI-FUEL GAS ENGINE
35. Bi-Fuel® Cost Analysis Components
• Cost of diesel fuel per
gallon
• Cost of natural gas per
thousand cubic feet
(mcf)
• Cost of routine
maintenance
• Cost of future overhauls
36. Natural Gas and Diesel Fuel
Units and Conversions
• Natural Gas = 1000 BTU/SCF
• Diesel = 140,000 BTU/gallon
• 140 SCF of Natural Gas = 1 Gallon of
Diesel
• 0.14 MCF of Natural Gas = 1 Gas
Equivalent Gallon (GEG)