Laboratory Techniques &Amp; Measurements

Laboratory Techniques & Measurements
Name: Samer Fadda|Date: 7/20/13|
Exp 2: Laboratory Techniques & Measurements|Lab Section: 76426|
Data Tables:
Length Measurements
Object Measured|Length in cm|Length in mm|Length in m|
CD|12|120|0.12|
Key|6.4|64|0.064|
Spoon|15.2|152|0.152|
Warm Temperature Measurements
Hot tap water temperature54ЛљC 129.2ЛљF327.15K
Boiling water temperature at 5 min100ЛљC 212ЛљF 373.15K
Cold Temperature Measurements
Cold tap water temperature22ЛљC 71.6ЛљF295.15K
Ice water temperature at 5 minutes0ЛљC32ЛљF273.15K
Mass Measurements
Object Measured|Mass in g|Mass in kg|
PAPERMATE Pen|10|0.01|
Quarter|5.6|0.0056|

Nickel|5.0|0.005|
VolumeMeasurements and Density Measurements with liquids ... Show more content on Helpwriting.net ...
When you are doing the displacement method there can be an error on how much volume of water you accurately pour in.
B. What is the relationship between mL and cm3 (cc stands for cubic centimeters)?
Both of them are equal in terms of volume.
C. To help you get a feel for metric measurements, you need to know the relative magnitude of a few basic measurements. For example: 1 mm =
thickness of a dime, a penny weighs 2 ВЅ grams, and 20В°C = normal room temperature.
Determine the following:
1. What is the mass in kilograms (kg) of a person who weighs 143 lb?
64.9 kg
2. What weighs approximately 1 g?
1000 mg equal 1 g.
3. What is approximately 1 cm long, wide or thick?
10 dimes are equal to 1 cm of thickness.
4. What weighs about 100 g?
40 pennies weigh about 100 g.
D. An object has a density of 11.3 g/cm3. If it weighs 7.0 g and you added it to a graduated cylinder with 5.0 mL of water, what will be the new volume
of water in the cylinder after the object is added?
Volume– 7/11.3=0.6195cm^3
Volume of water with object– 0.6195 + 5 = 5.6195cm^3 = 5.62 mL
E. If you were to dilute the sugar solution one more time, would the density of the solution increase or decrease?
The density would decrease.
F. Is the dissolving of a sugar in water to form a solution a chemical change or physical change?
This would be a physical change because for it to be a chemical change the product would have to be a new
... Get more on HelpWriting.net ...

Boston
Colin Drury, Management and Cost Accounting– Boston Creamery
Boston Creamery
Professor John Shank, The Amos Tuck School of Business Administration
Dartmouth College
This case is reprinted from Cases in Cost Management, Shank, J. K. 1996, South Western Publishing
Company. The case was prepared by Professor John Shank from an earlier version he wrote at
Harvard Business School with the assistance of William J. Rauwerdink, Research Assistant.
This case deals with the design and use of formal "profit planning and control" systems. It was originally set in an ice cream company in 1973, a few
years before the advent of "designer ice cream".
Frank Roberts, Vice–president for Sales and Marketing of the Ice Cream Division of Boston ... Show more content on Helpwriting.net ...
Actually, this forecast was the same as the latest estimate of 1999 actual litre sales. Since the 2000 budget was being done in October of 1999, final
figures for 1999 were not yet available. The latest revised estimate of actual litre volume for 1999 was thus used. Rather than trying to get too
sophisticated on the first attempt at budgeting, Mr. Peterson had decided just to go with 1999's estimated volume as
2000's goal or forecast. He felt that there was plenty of time in later years to refine the system by bringing in more formal sales forecasting techniques
and concepts.
This same general approach was also followed for variable product standard costs and for fixed costs.
Budgeted costs for 2000 were just expected 1999 results, adjusted for a few items which were clearly out of line in 1999.
Original Profit Plan for 2000
Standard Contribution
Forecasted Standard
Margin/litre
Vanilla

Forecasted litre Sales
Contribution Margin
$.4329
2,409,854
$1,043,200
Chocolate
.4535
2,009,061
911,100
Walnut
.5713
48,883
28,000
Buttercrunch
.4771
262,185
125,000
Cherry Swirl

.5153
204,774
105,500
Strawberry
.4683
628,560
294,400
Pecan Chip
.5359
157,012
84,100
Total
$.4530
5,720,329
$2,591,300
Colin Drury, Management and Cost Accounting – Boston Creamery
Breakdown of Budgeted Total Expenses
Variable Costs

Fixed

Subaru's Five Irresistible Used Sporty Cars
Subaru's 5 Irresistible Used Sporty Cars Subaru, founded on July 15th 1953, is the twenty–second largest automaker by production worldwide in 2012
and for good reason. Subaru began selling cars with the motto "Inexpensive, and built to stay that way" and delivered the best economic cars. Their
grand entrance into motor vehicular field was made with Subaru 1500, that used a 1.5 litre four–cylinder OHV engine, which set the bar high for
themselves and others. Though four wheel drives are the reason for Subaru's fame, there are some very sweet rides that went out of production but
are still the best choice among used cars. 1. Impreza P1 Impreza P1 is the sixth limited edition car from Subaru introduced in March, 2000, five
years after Colin McRae drove Subaru to clinch Britain's first ever World Championship in 1995. The P1 (Prodrive One) was built solely for the UK
and exactly 1000 cars were manufactured and sold. It uses a 2.0–litre turbocharged flat 4 boxer engine that displays a maximum power of 280 bhp @
280 rpm. Its top speed is a recorded 155 mph and goes from 0 to 60 mph in 4.8 seconds. The front and rear spoiler aids aerodynamics so much so that it
uses much less power than a standard turbo even at a speed of 100mph. 2. Impreza 2.0 WRX... Show more content on Helpwriting.net ...
Impreza 2.0 WRX was the first Subaru to be sold in the US; this change of heart occurred when Subaru realised that the demand for these cars are high
enough to cover certifying costs. It uses a 2.0–litre turbocharged flat 4 16V boxer engine that displays a maximum power of 227 bhp, has a top speed
of 145 mph and goes from 0 to 60 mph in 5.6 seconds. It is smooth, efficient and glides on the road. Even at a mileage above 50,000 the car functions
just as new without the slightest decrease in power or top

Honda Hrv Essay
The Complete Dimensions of Honda HRV Honda HRV is based on the Honda Jazz platform. Honda HRV is different from Jazz through length,
width and height. Therefore, the large interior space can be expected. It is more important to describe about dimensions of HRV. The dimensions
are also an important fact which differentiates between honda hrv vs crv. Dimensions of HRV is explained as below, Exterior Dimensions: HRV
is taller and longer in comparison with Renault Captur. HRV's length is 4,294 mm. HRV is measured in width is 1,770 mm. The height of HRV is
1,605 mm and wheel base is measured as 2,610 mm. Interior Dimensions: The basic trade of Honda is making anyone to feel like being in spacious
surface. Therefore, HRV is not different from that. In terms of honda hrv interior, Honda HRV has spacious headroom, legroom and shoulder room.
The front headroom of Honda HRV is 985mm and read headroom of HRV is 945mm. The elbow room is measured as 1,240mm. The front knee
room is accounted to be 495mm and back knee room is designed in 480mm. Capacity To Store Luggage: The 2016 honda hr–v lx has 470 liters
measured boot with back seats. With the back seats folded, boot measures 1,533 liters. If you want to enhance luggage capacity of HRV, just use
"magic seat" system. It will enable the back seat base to be flipped up. Capacity Of... Show more content on Helpwriting.net ...
Honda says that, HRV has 58.8 cubic feet storage space or 24.3 cubic feet behind second row seat. It remains more flexible than any of its rivals. HRV
has earned 5 star rating from Federal Government. The 2016 honda hr–v has a standard back view camera and tire pressure monitors. Beyond these, it
also has usual traction systems and airbags. If you expect for $19,995, base HRV will be available with power windows, locks, mirrors, rear view
camera, telescope steering, steering wheel audio controls and Bluetooth and audio

Glucose Concentration In Coke And Gatorade Lab Report
This experiment was performed to determine the glucose concentration in selected drinks, Coke and Gatorade. Absorbance readings were measured
providing us with values to then calculate the glucose concentration, these values were then compared with theoretical values. Results that were
obtained from the experiment fell short of the theoretical values which resulted from human error.
Enzymes are biological molecules which act in aim to increase the rate of chemical reactions, achieved by lowering the activation rate for the enzyme
to react with substrates to produce one of more products. Using a multi–step enzymatic reaction, we will be able to determine the concentration of
glucose in both coke and Gatorade (Laboratory Manuel 2017) which will be done using a spectrophotometer. This is a method measuring both how
much of a chemical substance is absorbed and the intensity of the light passing through the sample solution. (Vo, K. (2015). This also measures the
concentration of NADPH which is a co–enzyme assisting the reaction which followed by spectrophotometry rely on different absorbance forms either
oxidised or reduced, NAD+/NADH/NADP+/NADPH. NADPH responds well to a wavelength of 340nm and the glucose concentration will be
determined by a certain reaction sequence linking to the appearance of NADPH. (Laboratory Manuel 2017)
The experiment aimed to establish the concentration of glucose in two sugar beverages, this is where it is expected for coke to contain much higher

Toyota Company
Company Background INTRODUCTION Toyota is one of the world's best–known and most successful businesses, building cars and trucks in 27
countries for sale in more than 170 markets around the globe. Worldwide production was 9.5 million (8.5 million for Toyota and Lexus brand
vehicles) in 2007, placing Toyota Motor Corporation (TMC) firmly among the world's leading vehicle manufacturers. This result keeps it on course
to achieve its ambition of becoming the world number one by the end of the decade, with a 15 per cent market share. Toyota global production in
2006 was more than nine million vehicles. That's the equivalent of one car coming off the production line every 3.5 seconds, every minute, every hour,
every day. A key element in... Show more content on Helpwriting.net ...
Several young men have gone on to worthwhile careers in the motor industry after their release. In addition to the academies, Toyota operates a national
dealer training centre at Salfords, near Gatwick. European – Global Production Training Centre In spring 2005, Toyota announced a new European
production training centre would be built in the UK. The ВЈ11.2 million facility was constructed in the grounds of the Burnaston plant and opened in
Spring 2006. Known as E–GPC (European – Global Production Training Centre), it provides skills training in production and maintenance for up to
1,000 employees a year from Toyota manufacturing operations across Europe. E–GPC is an extension of Toyota's Global Production Centre, which
opened in Toyota City, Japan, in 2003. UK PRODUCT RANGE With nine passenger models and three light commercial vehicles, Toyota has one of
the largest product ranges on the UK market. In addition, there are five Lexus luxury and sport models. Outline details of the range are given below.
Toyota Aygo City car, launched in summer 2005 Toyota's smallest model for the European market Available with the world's lightest and most fuel
efficient 1.0–litre petrol engine Built in the Czech Republic Toyota Yaris Second
–generation model launched January 2006 Three and five–door
hatchbacks 1.0,1.3 and 1.8–litre petrol and 1.4–litre diesel engines

The Benefits Of Drinking Water : The Life Of Water
Water is fundamental for life , Whether it be saltwater or freshwater. Without water none of us would even exist, The first forms of life were in the
ocean and those tiny microscopic organisms slowly but surely evolved into all the creatures that now exist in Earth. We humans survive on water
due to having 65% of our body weight being water. An average human drinks around 87600 litres in their lifetime which accumulates to around
175000 water bottles drank in a lifetime. You might think we have all the water we need due to 71% of the earth's surface is water but you're wrong
because only 3% of all the water in Earth is freshwater and 2.7% of it is frozen in icebergs which means we only 0.3% of fresh water in the surface of
Earth. There are over 7.5 billion people in Earth and we are not sharing the 0.3% water we have equally. Scientists estimate the population will be over
11 billion by 2100, Just imagine how hard water will be to obtain water if we're already having trouble with sharing water.The average american family
uses over 2000 gallons a day while an average African family uses 5 gallons a day. A child dies from water related diseases every 15 seconds.
According a report in 2012 more than 800 million people drink dirty water yearly and 5 million people die from drinking dirty water. That's far too
many. According to another report which is from 2006, Over 6000 children die each day from drinking dirty water. Water is limited and we have to
conserve our water

Persuasive Essay Water Footprint
Introductory Paragraph: The next time you're sitting back enjoying a hot cup of coffee consider that you've just consumed up to around one hundred
and forty litres of water, that's around how much water it took to grow the coffee beans that are in that coffee. This may be a shock but it is trifling
compared to the amount of soil, ground, surface, and rain water it takes to produce most goods humans consume or use on a daily basis, the volume of
which each Australian individual consumes is known as the 'water footprint'. Water footprints show the extent of water use in relation to how much is
needed for the production of goods consumed by inhabitants of a country. Without package labelling most Australians would have no idea how much
water that they are using by purchasing food or goods, or purchasing a home appliance. A global study "Water Footprints Of Nations" (Hoekstra &
Chapagain) found that Australia's households had the worlds worst record for the consumption of water, despite having one of the most efficient
farming and industrial usages. It is important for Australian residents to find ways to save water in their homes and in the industry to... Show more
content on Helpwriting.net ...
There have been a significant amount of global developments in water foot printing and water preservation in the past few years but it is important to
imply water package labeling to make Australia's population more aware of how much water that they are actually consuming on a daily basis, this is
crucial for giving Australia a future as without freshwater,

Lab One: Laboratory Techniques and Measurements
Lab One: Laboratory Techniques and Measurements
Abstract
The Lab One was done on Laboratory Techniques and Measurements. The first experiment with my Lab partner; we got opportunity to experiment
how to conduct measurements in length by using metric conversion. We started in cm units and changed into mm by x10, and moving decimal point
x1 to right. To find in meter we moved from cm to meter two decimal points to the left or double check our self divided by 100 and all records in
data table 1. The second experiment was to measure temperature of how cold and hot tap water can be by using thermometer in Celsius units. From this
experiment, gained knowledge that tab water doesn't boil to 100 Celsius related to containing different ... Show more content on Helpwriting.net ...
VolumeMeasurements:
The volume of a small test tube and a thin–stemmed pipet were determined in this section of the lab. Water was poured into a small test tube until the
water reached the very top edge of the test tube. The test tube was then emptied into a plastic 25 mL graduated cylinder and volume was measured and
recorded into data table 3. A think–stemmed pipet was completely filled with water. Drops were carefully counted and emptied into the empty plastic
25 mL graduated cylinder until the water level reached 1 mL. The number of drops in 1 mL was recorded into data table 3. The thin–stemmed pipet
had a total volume of 4 mL and that was also recorded into data table 3.
Mass Measurements:
Seven various household objects were chosen to measure using a digital gram scale. Each object's mass was estimated by lab students and recorded
in data table 4. A quarter, ball point pen, rubber bulb, large paper clip, green crayon, house key and a copper penny masses were estimated and
recorded in data table 4. Each object was placed on the scale individually and its actual measurement was recorded in data table 4. As we started
estimating the household objects we were often not correct in our estimations. As we measured more and more objects, we got better in our estimations
by comparing objects with known masses and comparing them with the unknown

Research Paper On Mahindra Cars
Best and affordable Mahindra cars in IndiaNow a days, the potential buyers are interested in buying the best and affordable cars, which fulfil their
requirements with a comfortable and enjoyable driving. The final goal of the customers is to get the ultimate car in the huge list of variety models in
the passenger car market. Mahindra & Mahindra, the Indian utility vehicle company, offers the best and affordable cars in the Indian market. The
company is specialised in offering utility vehicles, compromising SUVs, compact (sub–4metre) SUVs, and MUVs. Moreover, Mahindra is the first
Indian company entered in the electric car segment in order to meet the government's regulations. Find out the following list of best and affordable
Mahindra cars in the domestic car market. Mahindra KUV 100: The KUV 100 is the sub–4metre trendy vehicle from Mahindra and launched in
January, 2016 with the... Show more content on Helpwriting.net ...
It is the facelifted version of the Mahindra Quanto but, the compact SUV comes with the dual tone interior theme, flexible 7–seat arrangement, 60:40
foldable seats, as well. The automatic versions available in six different colors and the NuvoSport car replaced the existing Quanto model. Price: Rs.
7.43lakh – Rs. 9.88 lakh Mahindra Scorpio: The Scorpio is the Mahindra's highest selling SUV offered in two kinds of turbocharged diesel engines,
2.2–litre and 1.99–litre with the CRDI (Common Rail Diesel Injection) fuel system. The 1.99–litre Scorpio models only available in the National
Capital reason while the 2.2–litre models offered in the rest of the places in India. It is available in both rear–wheel and four–wheel drive versions.
Very recently, the carmaker has introduced the special edition, Scorpio Adventure with the special effects on the exterior design. Price: Rs. 9.41lakh to
Rs. 15.14lakh Mahindra XUV

Lab Exercise At Room Temperature Equal
Introduction:
Many of molecular biology and chemistry involves working with very small volumes. A micropipette is standard laboratory equipment used to
measure and dispense a specific volume of liquid (#5 buffalostate.edu). This is a very helpful tool that we need to master and able to use in a
biochemistry lab. The purpose of this lab exercise is learning how to use a micropipette to find the density of different liquids, and be able to identify an
unknown liquid using density. Also, learn how to evaluate the experimental accuracy, precise, and error of small volumes used in biochemistry based
on the theory that 1gram of water at room temperature equal 1millimeter (#1 Bruice). If the density of water that determined after the experiment ...
Show more content on Helpwriting.net ...
Based on the theoretical density, the density of water, methanol, and glycerol that obtained in the experiment should be the same or close to these
values above. If the experiment performs correctly with high precise and accuracy, then density of the unknown can be used to identify the present
chemical substance. The expect outcome for this experiment is the value you obtained will be close or exact the theoretical values. In this exercise, all
of the micropipettes measured in the form of a microliter. There are different models of micropipettes have different minimum and maximum limits.
The two micropipettes we were used for this experiment are P1000 and P100. The correct micropipettes were chose based on the volume of the liquid
that needs to be measure. Micropipettes should never go past the set limits, either lower or higher. It will cause the micropipettes to not function
correctly or will measure incorrect volumes. The maximum sizes are showed on top of the plunger (thumb knob) button. P100 ranges from 10–100
microliter, P1000 ranges from 100–1000 microliter (#5 buffalostate.edu).
Figure A: Different parts of Micropipette
Materials:
A P1000 Micropipette and a P100 Micropipette.
Large and small pipette tips
4 different types of chemical substances: water, methanol, glycerol and unknown.
4 Disposable bowls
4 25mL beakers
A analytical scale
Procedure:

First, the P100 and P1000 micropipettes were

Measurement Folio Task : Rainwater Harvesting
Measurement Folio Task
Rainwater Harvesting
Introduction:
In today's world, the scarcity of water due to global warming and climate changes is a major problem. This cannot be reduced just by introducing
water restrictions, it is necessary to collect and store water in order to use them during droughts and situations where the supply of water is limited.
For this purpose, many cities have decided to build rainwater harvesting tanks in order to collect and store rainwater for future use.
Rainwater can be used in various ways including watering gardens, toilet flushes, household chores etc. Though, it is not advisable to drink rainwater,
it can still be used for cooking after being boiled or cleansed.
This report will include investigating several things such as the sizes of the tanks required for a certain volume of water, the volume of water that
should be used during different times of the year and so on.
Through this task, common questions like– What is the capacity of rainfall that my roof can catch? How often does rainfall occur? / What is the
average rainfall in my area? What dimensions of the tank would I need, to save a certain amount of water? How much water would I need for a
certain period of time? Would be answered
Answers
To prove: 1mm of rain that falls on 1m2 of surface = 1 litre of water in the tank.
L.H.S= 1 mm of rain on 1m2 of surface
Volume/ Capacity = h*A
= 1mm * 1m2
= 0.001m * 1m2 (Since 1mm= 0.001m)
= 0.001m3
1m3 = 1000 litre
в€
ґ

Report About Problems Caused By An Inappropriate Diet
Contents Page
Monday to Friday Geri's diet details (Feeding Table)
A4 Report regarding problems caused by an inappropriate diet
Conclusion
Introduction
In the assignment I am going to be showing you a diet sheet from Monday to Friday regarding what my cat Geri's diet details are, I am then going to
produce an A4 report regarding possible problems caused by incorrect feeding.
Day of the week Type ofFoodAmount of Food Given Intake of Food Timescales Supplements Treats Additional Foods GivenProblems or Comments
Reporting Problems
Monday VitaCat Select
Provision of Water
The cat gets a litre of water with each meal as well as two other bowls containing a litre of ... Show more content on Helpwriting.net ...
Today she had around 2300 millilitres of water today. 8:00am: 100 grams of food
2:00pm: 100 grams of food
9:00pm: 100 grams of foodMorning feed the cat ate around 95 grams of the food, around 75 grams in the afternoon and 45 grams in the night. In
total she has had 215 grams out of 300 grams. In the morning the cat took around 1 minute 10 seconds to eat the food, the afternoon feed she took
around 2 minutes 40 seconds to eat the food and around 2 minutes 50 seconds on the evening feed. In total around six minutes to eat all of the meals.N
/A25 grams of biscuits 8:00am with food
25 grams of biscuits 11:00am
25 grams of biscuits 2:00pm with food
25 grams of biscuits 5:30pm and 25 grams of biscuits 9:00pm with food.
20 grams eaten in the morning, 25 grams eaten at 11:00am, 15 grams eaten in the afternoon, 5 grams eaten at 5:30pm and 17 grams eaten in the night.

82 grams eaten out of a possible 125 grams. 20 grams of chicken after each meal
5 grams eaten in the morning, 8 grams eaten in the afternoon and 13 grams eaten in the night. 26 grams eaten out of 60 grams.
N/A
N/A
Wednesday Vitacat Select
Provision of Water
1 litre of water with each meal as well as two other bowls throughout the day so she had access to 5 litres of water. She had around 500 millilitres of
water each bowl so she had a total of 2500 millilitres out of 5000 millilitres. 8:00am: 100 grams of food
2:00pm: 100 grams of food
9:00pm: 100 grams of

My Educational Program For Master Degree Program
2.2 Career Episode 2 2.2.1 Introduction. In this career episode, I describe an engineering task which I undertook as part of my educational program in
master degree program in Entrepreneurship Commercialisation and Innovation Centre (ECIC) Faculty of Engineering, Computer and Mathematical
Sciences (now under Faculty of the Professions)–The University of Adelaide, Australia. In this task, I developed a systematic operations plan for a
project producing a business categorised as SME in food industry in Adelaide, Australia. 2.2.2 Background. Today, functional foods are considered to
become one of the solutions of managing health and wellness to the people that challenges by the increasing of obesity, ageing population and a
number of... Show more content on Helpwriting.net ...
The secondary product is smoothies, a combine and blend of original frozen yogurt with one or two real fresh fruits. 2.2.3 Personal Engineering
Activity 2.2.3.1 Organisational Structure and Job Description. The organisational structure should be consistent with the vision and objectives of
business and can be a source of competitive advantage (Friend, G and Zehle, S, 2004). I proposed the organisational structure as is illustrated in
the Figure 2 below. In this task, I also prepared the job description of each job. 2.2.3.2 Raw Materials and Suppliers of Raw Materials. Frozen
yogurt, primarily made from frozen yogurt mix that consist of milk, sugar and stabilizers. Depending on the mix, it can include colouring, fruit
extracts, and spices. This mixture is pasteurized for shelf life and sold in liquid or dry/powdered form. There are several options to obtain frozen
yogurt mix, which are: 1) buy powder frozen yogurt mix from suppliers; 2) buy liquid frozen mix yogurt from suppliers; 3) buy plain yogurt from
suppliers and mix with other ingredient to make frozen yogurt mix; 4) produce the shop own yogurt, and mix with other ingredient to make frozen
yogurt mix. By analysing the advantage and disadvantage of those options, I recommended to make the shop own frozen yogurt mix by buying organic
plain yogurt from supplier as main ingredients and mix with other ingredient to make

Modern Desalinating Sea Water
Desalination has been used for thousands of years – Greek sailors boiled water to evaporate fresh water away from the salt and Romans used clay
filters to trap salt. Today's sophisticated methods still generally use the concepts of distillation or filtration. The process of desalinating sea water to
make it drinkable has a long and rich history. However, the first large–scale modern desalination process to appear was multi–stage flash distillation
(MSF) during the mid–20th century in the USA (1955). Furthermore, although multi–effect distillation (MED) had been discovered and had the
potential to be more efficient than MSF, it took a while longer to make the MED process efficient on an industrial scale and this did not occur until
1959 when

The Current Water Usage Of The Refugee Settlement Essay
The Zambian Refugee Settlement in Mayukwayukwa, which established by the United Nations in 1966, currently has no system for harvesting
rain water or for storing water in bulk. Zambia has a monsoonal climate thus it receives all of its rain water in one small section of the year and is
dry and arid for the rest. This review will focus specifically on the water usage of the refugee settlement. This area of research will prove to be
invaluable for the specifications of the water harvesting and bulk storage system as it will be the basis for which the required volumes of water are
calculated. The development of the Mayukwayukwa settlement will be stunted if they do not have access to sufficient amounts of water for the
refugees who live there or for the crops and animals. The objectives of this paper are to assess the current water usage of the Mayukwayukwa Refugee
Settlement and to predict what the minimum volume is that will meet their basic requirements. The questions that I intend to answer are: – What is the
current water usage of the refugee settlement in Mayukwayukwa? – What is the minimum volume that will meet the basic requirements of the people
in the refugee settlement? An accurate data set of water usage of the Refugee Settlement in Mayukwayukwa is impossible to find as there have been
no previous attempts to measure it for any reason. The total water usage of the Mayukwayukwa Refugee Settlement is 64,240,000 Litres/Year. This
total can be

Lubricating Oil Market In Australia
Market study: Lubricants
November 2012
Summary
The Lubricating Oil Market in Australia3 Introduction3 The Packaging of Retail Lubricating Oil3 Major actors in the sector4
The Lubricating Oil Market in Australia
Introduction
The consumption of lubricating oil in Australia totalled 458 megalitres (ML) in 2009/10.
The major users are industrial and mining companies, primary producers, transport companies and the automotive industry. These commercial users
account for approximately 85 per cent of sales of lubricating oil. These sales are almost entirely made in bulk, or in steel drums, directly from the
lubricating oil companies or their distributors.
The balance of sales, approximately 40 ML/year, is made in ... Show more content on Helpwriting.net ...
| | Fuchs is the world's largest independent manufacturer and supplier of lubricants. The wholly owned Australian subsidiary has been supplying
specialised lubricants since the late 1890's and is the leading market player in many lubricant sectors.| | Delivering the most complete range of
synthetic lubricants and fuel additives available in Australia. From a 3,500HP dragster to a 3.5HP lawnmower Red Line has fully synthetic products,
which will deliver a stunning level of protection and efficiency gains.| | The Caltex range of lubricants is led by our flagship petrol engine oils
Havoline Fully Synthetic and Havoline Premium Plus, and DeloВ® 400 Multigrade for diesel engines. The advanced technology in Caltex Havoline
Fully Synthetic | | PM Lubricants Australia – an all Australian lubricant company with a simple aim – to produce and distribute the finest quality
lubricants in the world. PM specialises in formulating and marketing exceptionally high quality, high performance, time and money saving lubricants.| |
Phoenix Lubricants is an independent Australian supplier of bulk lubricants, including engine, transmission, gear and hydraulic oils, coolants and
additives. | | Bimrose Lubricants Oil, grease, fuel treatment, molybdenum disulfide grease, plain grease|

Others smaller manufacturers: * Hi–Tec Oil Traders Pty Ltd– Lubricants Smithfield NSW Australia * Tecalemit

Water Hardness Titration Essay
Title: Determination of Water Hardness Using a Titrator
Purpose: To become familiar with the concept of water hardness, practice a titration technique using a titrator, and determine the hardness of the local
water supply.
Procedure:
1. Gather the test tube holder, small stopcock, 10–mL syringe (titrator), and 2 thick textbooks and the LabPaq box or 5–6 thick textbooks.
2. Remove the plunger from the titrator and place it back in your LabPaq box.
3. Attach the stopcock to the tip of the titrator by placing the larger, clear, plastic end of the stopcock into the tip of the titrator and then twisting the
stopcock into place. The stopcock should fit tightly into the titrator, so that the liquid will not leak.
4. Stack the ... Show more content on Helpwriting.net ...
This will fill the tip of the titrator with EDTA solution and remove any air bubbles from the titrator.
14. Place the paper towel with the EDTA drops into the trash and re–position the clean, dry 100– mL beaker back in the titration setup, under the titrator.
15. Use the graduated cylinder to measure exactly 10 mL of tap water from your sink.
16. Pour the 10 mL of tap water into the completely dry 100–mL beaker.
17. Add 5 drops of pH 10 buffer solution to the 10 mL of tap water in the beaker. Carefully swirl the mixture in the beaker to ensure that the buffer is
incorporated into the water.
18. Dip approximately 10 mm of a toothpick into the distilled water. Then, while toothpick is still damp, dip the toothpick into the EBT indicator
powder.
19. Dip the EBT–covered toothpick end into the water in the beaker and carefully stir, to transfer all of the EBT from the toothpick into the water.
20. Carefully swirl the beaker for 30–60 seconds to fully dissolve the EBT into the water solution.
21. Read the volume of EDTA in the titrator and record in Data Table 1 under "Initial EDTA Volume (mL)", next to Trial 1.
22. Open the stopcock and add 1 drop of EDTA to the purple–pink water sample in the beaker.
After the drop is added, gently swirl the beaker and observe the color for 5 seconds.
23. Continue adding EDTA solution, one drop at a time, to the beaker, swirling and observing after each drop,

Desalinated Water In Australia
Desalinated water is critical to Perth's water supply as Western Australia continues to experience a drying, arid climate. It is important that a reliance
on traditional water sources such as dams are reviewed and new and sustainable sources that are climate independent are implemented. Factors of a
drying climate, extreme weather conditions, population increase (Population in Perth to double in the next 50 years) and the way we currently source
out water need to be evaluated in order to ensure a climate resilient supply that is independent of varied amounts of rainfall. Desalinated water is
critical to Perth's water supply due to the states large infrastructure and mining industry.
Water is incredibly important for the future of both Perth

Right Size Aquarium Essay
How to Find the Right Size Aquarium
Finding the right size aquarium sometimes are hard to find. Sometimes people find some obstacles when they decide the range of the aquarium.
This kind of problem may happen to you as well. You may find some difficulties to choose what size is appropriate for your room. You cannot place
any size of the tank in your room because the space of your room may be different. You need to consider about your room space before deciding your
tank. Another thing that may affect your decision is how big your tank is.
The size of your tank will affect the amount of water for the aquarium. The size of your aquarium will impact to how many water volume liters you
should have. Thus considering about these two will help you ... Show more content on Helpwriting.net ...
You need to consider where you will put the aquarium.
Size, as already mentioned above the scale of the tank is really important to deciding what type of fish you will keep. If you want to keep the small
fishes, then you just need a small aquarium. But, if you will keeping a big fish you need a large tank.
The Design or Model Aquarium, the place where the aquarium will be installed determines the shape or model of the aquarium. So, you need to
consider about this. For the example, if want places your aquarium in the corner of your room, then you need a bow front shape as corner aquarium.
If you consider about these three, then you can definitely get your right size tank. Above all, you need to know about several other things as well like
the space bubble. You need to have the space bubble since it will help to balance the oxygen in the tank.
Moreover, the equipment such filtration should be in the right place as well. Filtration is important to clean the water in the tank. All types of aquarium
have this equipment. Then, you need to choose the best filter for this. The filter is the essential equipment in an aquarium and has different sizes. So,
you have to consider where it should be put on. You can put your filter in several locations around your

Essay on Coca Cola CSR
CSR Case Studies: Coca–Cola 1. Why did Coca–Cola Vietnam chose to work on water projects? Coca Cola is a beverage company, a major consumer
of water resources, it uses 2.43 liters of water to produce just 1 liter of beverage which makes it prone to criticism and consumer boycotts so to
protects its brand image and defend its vision statement, which said be a responsible citizen, and run its business smoothly it decided to start water
program to maintain its operations in Vietnam and build a CSR reputation. 2. What is the risk to Coca–Cola's reputation in using too much water and
producing waste water? As Coca Cola uses too much water, it uses 2.43 liters of water to produce just 1 liter of beverage, and produces... Show more
In addition, Duyen Thai People's Committee and local Government health officials are other key stake holders. However, Coca–Cola in Vietnam lacks
an employee volunteer component a key stakeholder which should be involve in Vietnam community projects which is the major part of strategy in
the other part of the world. 5. What risk is there to Coca–Cola in using its NGO partners as a key means to reach out to local communities? The NGOs
running the program on behalf of Coca–Cola do most of the interaction with the local communities and it utilized its NGOs to learn about their specific
needs and target assistance where it was most needed. It does not reach out the local communities it–self and primarily focused on the outputs of the
programming, such as the number of communities students served and it measures whether the NGO partner meets the timeline, budget targets and
amount spent per beneficiary reached. The risk is there that Coca Cola might not be having the true information as it is using NGOs as middle man.
The true needs might be ignored and not properly addressed by the NGOs. 6. What can Coca–Cola do to improve its community programming? Coca
has developed a comprehensive CSR community programming which covers education, health care and the environment projects. However, in
Vietnam a key stakeholder, employee volunteer component, is missing which is important for the improvement of community programming. Further,
Coca Cola is

3 Compagnie Du Froid S Essay
9–197–085 REV: FEBRUARY 11, 2010 ROBERT SIMONS ANTONIO DГ
ЃVILA Compagn nie du Froid, F S S.A. Jaccques Trumen, CEO and major
shareh holder of Com mpagnie du Froid, S.A., was w reviewin ng the perforrmance of thee three region ns of the busin ness: France, Italy, I and
Spaain. Evaluatin ng the perform mance of thee regional vicce–presidents was not a taask that he en njoyed. Jacques had tradittionally given n each
region nal manager the t same bon nus: 2% of corrporate profitts. Jacques beelieved that th his system avoided arbitrrary evaluatio on criteria an nd
encourageed open and fruitful comm munication among a the reegions aboutt new ways off doing busin ness. Th he results in 2009 challen nged the
fairn ness of this evaluation e sy... Show more content on Helpwriting.net ...
The final phase of the profit planning process was a top management meeting which brought together Jacques, the three regional vice–presidents, and
the finance and technical officers to discuss new growth opportunities. A lot of time and face–to–face contact was devoted to the profit plan and, once
approved, it was the guiding tool to monitor and evaluate performance. During the summer months, each region generated a profit statement every
two weeks that Jacques reviewed to detect major problems. In addition, Jacques spent a week in each region to "get a feel for the market." At the
end of October, another top management meeting occurred to learn from the year's experience and schedule winter activities to prepare for the next
season. In early December, Jacques handed bonus checks to the three regional managers. Top line revenue goals for the upcoming year were
established using past growth rates and the market expectations of Jacques and the regional managers. Exchanging knowledge and experiences was a
key element in shaping the growth assumptions of the profit plan. For 2009, the expected volume growth was 9% for the French region, 10% for the
Spanish region, and 12% for the Italian region. Since 2005, when Compagnie du Froid introduced its first specialty product–sophisticated icecream
flavors made with prime quality ingredients, the strategy had

Canadian Water Debate
Water Debate
Selling our water will be beneficial to Canadians because it will create new jobs and help out the economy, we could have Canada trade its water for
other natural resources instead of just selling it.
With Canada having 20% of the world's fresh water and 9% of the world's renewable fresh water means that we will have enough to sell and trade
with other countries and to keep for our own. Canadians waste a lot of water mainly by flushing the toilet takes up 30% of the water, bathing 35%,
20% drinking and 10% cooking. Canadians could easily cut down on water by enforcing laws to making water more expensive or even cutting down
the time they use the water. Around the world 1.4 Billion people are lacking cleandrinking water with Canada's population being just around 35
million. Each year seven million from all around the world die year from diseases linked to unsanitary water and the problem is getting worse each year.
Other countries that are in need of water will come after Canada first because Canadians have a lot of water with low population making it an "easy
target" for them to attack for water.
If Canadians sold water to other countries it would prevent future wars from happening and people dying from diseases.
Water Application
Malley, Martin O. "Canada's Water Angela Mulholland." Canada's Water. CBC NEWS ONLINE, n.d. Web. 01 Apr. 2014. http://www.portaec.net
/library/ocean/water/canadas_water.html
Canadians over use their water carelessly while other

hider of truths
Name ____________________________________
Period ________
Date __________
EXTRA CREDIT: Dimensional Analysis and The Crash of Flight 143
This assignment is worth 5 bonus points on your Measurement Test.
Read the accompanying article "The Crash of Flight 143," ChemMatters, October, 1996, pp. 12–15.
Answer the following questions completely.
1. What are the three possible causes of the 767's fuel pump alarm?
1)
2)
3)
2. The second fuel pump alarm made which possible cause most likely?
3. The faulty calculation occurred when converting from liters to kilograms. Why isn't jet fuel measured by volume like gasoline is in cars?
4. What units were needed on the number 1.77 to express the density of jet fuel?
5. What units should they have ... Show more content on Helpwriting.net ...
Pearson consulted the plane's reference handbook, which said that normal flight was possible with one defective fuel pump. A few seconds of wary
calm passed.
Then more alarms sounded. The second pump in the left wing tank was also failing. It was too much of a coincidence for two pumps to fail at the
same time–it was more likely that the left tank was running out of fuel.
"We've got to go to Winnipeg," Pearson said quickly, setting a course for the nearest large airport. Quintal radioed air traffic control, and they received
immediate clearance to descend to 6,000 feet.
Pearson throttled back the engines and switched a computer monitor to display the descent into Winnipeg.

But he began to doubt that the plane could even make it
After both engines ran out of fuel, Flight 143 glided powerless for 29 minutes before the pilots there. brought it down on the end of runway 32. With a
collapsed nose gear and two blown tires, the
The cockpit crew grew tense as the 767 nosed down plane skidded to a stop just before hitting a telephone pole and a fence. The giant aircraft
miraculously avoided skidding into people who were watching a sports car race on the toward the clouds below. More beeps blared the worst
abandoned runway. possible news: all four remaining fuel pumps were now
The plane's instruments should have quickly detected the error.

The Use of Mathematics in the Medical Field Essay
The medical field is a very interesting career field. There are hundreds of different occupations within this field, including anything from saving a
fragile newborn baby's life to prescribing antibiotics to a relatively healthy adult. No two occupations are exactly alike, but each one is equally
important. Although there are several job variations in medicine, they all have at least one thing in common. Every occupation within the medical field
relies heavily on mathematics. Elementary mathematics, geometry and algebra are all obviously crucial to advancing in new technology, saving lives
and curing diseases. However, most people do not realize the importance math has on simpler tasks performed every day by doctors, nurses, x–ray ...
Show more content on Helpwriting.net ...
Similarly to doctors and pharmacists, nurses also rely on the metric system and are required to convert measurements quickly. Many nurses deal with
this daily through calculating IV drip rates. Most IV bags contain one thousand cubic centimeters of fluid. A doctor may order his/her nurse to
administer one thousand cubic centimeters every 8 hours. This may not seem too difficult, but in order to do this a nurse has to precisely calculate the
drip rate of the machine so that the patient gets the required amount of medication in the time frame the doctor suggests. In contrast, a smaller bag of
IV fluid may require instruction to give a patient five hundred milligrams every thirty minutes (Boyd). Before calculating the drip rate of the small
bag, a nurse would have to convert the original cubic centimeters to milligrams. Just as important as conversions, ratios and proportions also play a
huge role in the medical field. Nurses use ratios and proportions when giving medication based on their patient's weight and height. A doctor may give
the order 25 mcg/kg/min. If a patient weighs 114 pounds, how many milligrams of medication should he/she be given per hour? To figure this, his/her
nurse would begin by changing micrograms into milligrams. If one microgram is equal to 0.001 milligrams, the nurse can find the amount of
milligrams in twenty–five micrograms by setting up a

Water Usage Of The Refugee Settlement Essay
Intro The Zambian Refugee Settlement in Mayukwayukwa, which established by the United Nations in 1966, currently has no system for
harvesting rain water or for storing water in bulk. Zambia has a monsoonal climate thus it receives all of its rain water in one small section of the
year and is dry and arid for the rest. This review will focus specifically on the water usage of the refugee settlement. This area of research will prove
to be invaluable for the specifications of the water harvesting and bulk storage system as it will be the basis for which the required volumes of water
are calculated. The development of the Mayukwayukwa settlement will be stunted if they do not have access to sufficient amounts of water for the
refugees who live there or for the crops and animals. The objectives of this paper are to assess the current water usage of the Mayukwayukwa Refugee
Settlement and to predict what the minimum volume is that will meet their basic requirements. The questions that I intend to answer are: – What is the
current water usage of the refugee settlement in Mayukwayukwa? – What is the minimum volume that will meet the basic requirements of the people
in the refugee settlement? An accurate data set of water usage of the Refugee Settlement in Mayukwayukwa is impossible to find as there have been
no previous attempts to measure it for any reason. The total water usage of the Mayukwayukwa Refugee Settlement is 64,240,000 Litres/Year. This
total can be

Water Consumption Report On Drinking Consumption
Water Consumption Report Student Reference (2137178F) Abstract Although a large majority of planet Earth's surface comprises water, only a small
percentage of it is in fact suitable for use. The human population is growing rapidly and the demand for fresh water is steadily increasing. The aim of
this investigation is to measure personal water consumption over a period of three weeks and compare the collected data with the average water
consumption of individuals in countries at both ends of the economic spectrum. The results of personal consumption show that over a one–week
period, an average of 713.17 litres of water were consumed (discounting embedded water), which breaks down to a daily average of 101.88 litres.
Although this is lower than the average daily consumption of 150 litres for an individual in the UK , measures can be nevertheless be taken to reduce
fresh water consumption, such as placing bricks inside the toilet cistern, using the washing–machine less often, and using a weaker flow setting on the
shower. Introduction Issues relating to water are increasingly becoming a major global concern. The need for fresh water is fundamental to human life
and an increasing percentage of the global population do not have access to it. In 2011 the UN Secretary–General expressed how 'Safe drinking water
and basic sanitation are intrinsic to human survival, well–being and dignity'.) . However, with the global population on the increase, the demand for
water and food

Compagnie Du Froid Essay
1. What is your evaluation of each of the three businesses? What is your evaluation of the managers who run them?
The case in hand, Compagnie Du Froid, S.A., analyzes the company's three regions (France, Italy and Span) and their regional manager's business
performance against the set profit plan for FY 2009. Additionally, the case also raises the question of whether the traditional approach of paying 2% of
corporate profit as bonus will work or not. The situation is that the thee different regions have three different actual return figures and there are several
first time situations that Jaques Trumen, CEO and major shareholder of Compagnie du Froid, S.A., is facing. The points in FY 2009 that grabbed our
attention are: a) Spain ... Show more content on Helpwriting.net ...
Despite this it ha exceeded its revised growth target of 4.9% (adjusted for temperature drop) by 1.9% and achieved 6.8% growth (calculation based on
exhibit 1, 4 and 6 of the given case). On production end, Spain had several challenges. Firstly, it had to acquire new machineries, and secondly, Spain
was forced to get 603 thousand litres of ice cream from France. This transfer, as mentioned above, was executed based on cash plus 5% profit causing
an impact to Spain's already challenged business situation.
According to our observation, the significant variables in FY 2009 that need further investigation are (Exhibit 1, 4 and 6): * 0.08 cents reduction in
Ice–cream price due to competition * 0.01 cents reduction in specialties price * Lower than planned usage of ingredients (510 liters lower) for
ice–cream and 21 liters for specialties (Other ingredients were in 100 grams, which was converted to liters for the calculation of total ingredients) *
Lower labor usage in specialties and ice–cream production * 'Other Cost' posted 21 thousand euros higher costs, especially in supervision, energy and
maintenance * The selling and administrative expenses accounted 130 thousand euros higher than the projected S&A expenses
France:
According to the information provided in our case, French region posted an EBIT amount of 1242 thousand euros in FY 2009, although

Supply Great North American Railroad With A Cleaning Fluid...
Solution Plus, an industrial chemicals company, has received an invitation to submit a bid to supply Great North American railroad with a cleaning
fluid for locomotives. Our company specializes in cleaning fluids and solvents for a wide variety of applications. According to Great
North American, they need the cleaning fluid to be shipped to 11 locations such as Santa Ana, El
Paso, Pendleton, Houston, Kansas City, Los Angeles, Glendale, Jacksonville, Little Rock,
Bridgeport, and Sacramento. In order for our company to place a bid for this new contract, we must figure out the price per gallon we will charge. In
our normal business transactions, we charge a 15% more than the cost to produce and deliver the product. At Solution Plus, we must determine our
breakeven price, so that we can accurately submit a price that will benefit our company from this new contract.
In Solution Plus, we have one plant in Cincinnati, and one plant in Oakland that we contract out to ship up to 500,000 of the locomotive cleaning fluid.
The Cincinnati plant charges
$1.30 per gallon to produce, and the Oakland plant charges 1.65 per gallon to produce. The president of Solution Plus, Charlie Weaver, contacted
several trucking companies and was given guaranteed rates for one year, for shipping costs.
In order to figure out the price per gallon, we must create a transportation problem.
Cincinnati and Oakland are the production facilities origins, and the locations of each railway are the destinations for

Coca-Cola Case Study
Coca–Cola
May 17, 2013
I. Introduction Corporate Social Responsibility is the corporate initiative to assess and take responsibility for the company 's effects on the
environment and impact on social welfare. The term generally applies to company efforts that go beyond what may be required by regulators or
environmental protection groups.
Corporate social responsibility may also be referred to as "corporate citizenship" and can involve incurring short–term costs that do not provide an
immediate financial benefit to the company, but instead promote positive social and environmental change.
Companies have a lot of power in the community and in the national economy. They control a lot of assets, and may have billions in cash at... Show
more content on Helpwriting.net ...
2) Recycle: Coca–Cola is working toward ensuring 100% of its waste water is treated before returning it back to the environment.
3) Replenish: working with local stakeholders (communities, governments and NGOs) to replenish water to nature and communities.
V. Company Programs
To implement its Replenish vision, Coca–Cola currently has 250 water projects in more than 70 countries. Projects include watershed protection;
expanding community drinking water and sanitation access; agricultural water use efficiency; and education and awareness programs. As such,
Coca–Cola Vietnam began the Clean Water for Communities project in 2006. The project focuses on access to water and sanitation, and consists of the
construction of wells and latrines, as well as communication events for school children and communities to learn about clean drinking water and
sanitation. The project focuses on access to water and sanitation, and consists of the construction of wells and latrines, as well as communication events
for school children and communities to learn about clean drinking water and sanitation.
In order for a community project to be successful, companies must engage with their communities. Coca–Cola representatives' travel to the
communities they serve, but typically the NGOs running the program on behalf of Coca–Cola do most of the interaction with the communities.
Coca–Cola has strong relationships with the World Wildlife

Toyota Company
Company Background INTRODUCTION Toyota is one of the world's best–known and most successful businesses, building cars and trucks in 27
countries for sale in more than 170 markets around the globe. Worldwide production was 9.5 million (8.5 million for Toyota and Lexus brand
vehicles) in 2007, placing Toyota Motor Corporation (TMC) firmly among the world's leading vehicle manufacturers. This result keeps it on course to
achieve its ambition of becoming the world number one by the end of the decade, with a 15 per cent market share. Toyota global production in 2006
was more than nine million vehicles. That's the equivalent of one car coming off the production line every 3.5 seconds, every minute, every hour, every
day. A key element... Show more content on Helpwriting.net ...
Sales companies were set up in Taiwan and Saudi Arabia before overseas production began, albeit on a small scale, in Brazil in 1959. It was in the
early 1960s that Toyota began importing cars to Europe, first to Denmark. In 1965 it entered the UK market, launching the Corona saloon at the
Earls Court Motor Show. The following year the original Corolla was launched, the first appearance of what was destined to become the world's most
successful model range with sales of more than 30 million worldwide. In 1965, the price tag on the Corona, Toyota's first UK model, was ВЈ1,000.
That's the equivalent of about ВЈ12,000 in today's money. The Corolla made its debut in the UK in 1966 Toyota's interests have not been confined to
the automotive sector. Beyond its original textile weaving business, the company has expanded into prefabricated housing, telecommunications and
boat–building. Its global activities continue to grow and in 2005 production of the Aygo city car began at a new factory in the Czech Republic, a
joint venture between Toyota and Peugeot CitroГ«n PSA, and a new engine plant in Poland came on stream, building a new generation of diesel
engines. In December 2007 Toyota opened its first factory in Russia, to build Camry models. TOYOTA (GB) PLC Toyota (GB) PLC is the national
marketing and sales company for Toyota and Lexus vehicles in the UK. That makes it responsible for

Food Hazards in India on Milk Adulterated Essay
The Apex court Thursday urged the state governments to make necessary amendments to their laws to make production and marketing of adulterated
milk, an offense punishable with life imprisonment. The court was hearing a Public Interest Litigation or PIL.
The ruling came in the backdrop of samples of milk collected randomly by the Food Safety and Standards Authority of India in 2011 revealed the
large–scale sale of adulterated milk across the country.
At this stage it is relevant to know how safe the Patnaites are from these health hazards. This correspondent lens through the capital city. It is shocking
to find that the manufacturing and supply being done from the Dairy Market at Patna Junction.
It is under the knowledge of both the food ... Show more content on Helpwriting.net ...
Many showroom owners buys this very paneer from us and sells at a handsome rate of 200–300 per kg'.
Surprisingly another vendor appeared from somewhere, put a piece of paneer at my palm and asked 'Sir, do you need it for the marriage party'? He
offered me an unbelievable price of Rs 60 per kg. The only condition was that it was a price should I buy the whole bulk he had, approximately 20
kilograms. It was shocking. When the rate of milk is Rs. 40 per liter how is it possible to sell paneer at this rate. Obviously the product wasn't paneer, it
was a cheap look–alike. But it sparked the inquisitiveness which leads me to go ahead.
Furthermore, as I step deep inside the milk market the scene went aghast. Something like milk was being boiled in dozens of containers using a
locally made burner amid heaps of garbage all around. People were urinating very near to this site. It was disgusting. I could not help taking snaps
quietly. It was the area of the market which the milkmen uses and not for paneer vendors. Better to say it was the producing unit of paneer.
More or less, this very paneer is being supplied to most of the eating joint, eateries and even big hotels in Patna.
But all we need to remember are just two things. First, a kilogram of paneer needs 5 liters of milk to process. And the most trusted packed milk (Sudha)
available in Patna is Rs 40/liter.

Case Study: Hotdog And Mobics
Product 3 (Triple Threat w/ Hotdog and Mojos)
UNITS NEEDED 2027AUGSEPOCTNOVDEC
EXPECTED MONTHLY DEMAND158161191200160
Inventory for Isolation
Fries 50g/serving7.898.049.5510.027.99In Kilo
Cup157.70160.74190.94200.47159.73
Straw157.70160.74190.94200.47159.73
Juice powder 12.5g/serving19.7120.0923.8725.0619.97In grams
Oil 33.3ml/serving5.255.356.366.685.32In liters
Hotdog 50g/serving15.7716.0719.0920.0515.97In grams
Mojos 50g/serving7.898.049.5510.027.99In Kilo
Egg .04/serving6.316.437.648.026.39per piece
Breading mix 7.41g/serving1.171.191.411.491.18In Kilo
Water 16oz/serving3.94 4.02 4.77 5.01 ... Show more content on Helpwriting.net ...
One unit of Double Team needs potato fries, hotdog, cooking oil, juice powder and water, cup and straw. Total quantity for the fries would be
33,827.22 grams (Fries 75g/serving) and for the hotdog is 18,625.32 grams (50g/serving); this will consume a total volume of 15,019.29 ml of oil (Oil
33.3ml/order); for the juice 5,637.87 grams of powdered juice is needed along with 7,216.47 ounces of water (Juice powder 12.5g and Water 16oz
/order); total cups and straws would then be 451 pieces. In order to meet this demand for the month of October, we must be able to sell at least 19
orders per day.
Expected demand for the month of November is 474 orders. To make one order of Double Team, we will need 75 grams of Fries, 33.3 ml of Oil, 50g
of Hotdog, 12.5 grams of Juice Powder, and 16 ounces of Water, 1 cup and 1 straw. Total quantity needed to produce 474 units would be 35,514.99
grams of fries, 23,676.66 grams of hotdog, 15,768.66 ml of oil, 5,919.17 grams of juice powder, and 7,576.53 ounces of water, total cups and straws
would then be 474 pieces each. At least 20 units of Double Team a day must be sold to meet the expected demand of 474

Price Control Essay
The price ceiling is the maximum price a seller is allowed to charge for a product or service. An impact on society includes when the prices are so
high of a product, that no one can buy it. A price floor is the lowest legal price a product or service can be sold at. When market price is at its lowest,
it may still be too high for consumers to purchase products. Governments can intervene for any purpose, and they are the ones who set these price
controls.
Governments may intervene in the market system to fix prices above or below equilibrium if they believe that it is in the public interest to do so.
Governments may intervene in the provision, regulation, maintenance and management of public goods to maximise the benefits to the ... Show more
Because consumers aren't paying as much for the product, producers will not be able to produce as much at the lower price, and consumers will
demand more because the product is cheaper. The end result will be consumers not being able to buy the product since there is not enough being
made. For example, the price of milk was $2 per litre, and has now been reduced to $1 per litre. This will be great for consumers as they can buy
more milk for less, until it runs out. Therefore price ceilings have a good impact on consumers.
For producers, price ceilings don't have as good an impact as it does on consumers. Since the consumers are paying much less money for goods and
services, they simply cannot afford to make any products. It will have a harmful effect on producers, as their surplus will decrease, resulting in them
not making as much product. For example, if the price of lettuce decreases from $7 to $5, then that means a decrease in the amount of money
producers are getting. They will not have enough money to grow lettuce, so there will be none or little lettuce harvested to be sold. This means that
price ceilings have a large impact on producers, and not in a good way.
If the government puts in a price ceiling, then the quantity demanded will exceed the quantity supplied, meaning that not enough goods or services will
be supplied to satisfy demand. This situation is called a shortage. Because price ceilings are installed in the interests of

Maths Assignment
Maths assignment Part A Will you have time to fill the pool with your garden hose? I will not be able to fill the pool because my flow rate is not fast
enough. My flow rate is 6.7L/min and I have 195 min to fill the pool up. 6.7x195 = 1.3L but I need to fill 2.9L so I would not be able to fill the pool.
How much will it cost to fill the pool? I need to fill 2.9KL of the pool. The water tier 2 cost $1.33 per KL and the bulk water costs $2.61 so 1.33 + 2.61
= $3.94 but I need just under 3KL so I would need to times 3.941 by 2.9 and that equals $11.42 the pool cost $11.42 to fill up. Is there a better short
term solution to this problem? There are two short term solutions. One of them is to go to the pool shop and buy more hoses so you can... Show more
For the square prism I had to find make it hold 0.5KL which is the same as 0.5m3. I made the length of the prism 1.5 and the Hight 1.5 but I
needed to find the width so I put it as A. The equation is 0.5m3 = 1.5x1.5xA so I took the a out and it equals 2.25. Which made the equation 0.5m3
=2.25xA. I then divide 2.25 by 2.25 and it cancelled out but what you do to one side you do to the other so 0.5 divided by 2.25 = 0.22 which gave
me the answer for a. In The equation I can now put 0.22 for a and then it would be, 1.15x1.15x0.22 = 0.495cm. Now for the square prism its
basically the exact same but with the different measurements. Volume=LxWxH, the length is 2.5cm, the width is 2.2cm but we don't know what
the hight is. We need to fill 0.5m3, I don't know a so I take it out and then it becomes 2.5x2.2 and that equals 5.5, so then we can do 0.5=5.5xA and
if I divide 5.5x5.5 it cancels out and if you divide one side you divide the other so it would be 0.5 divided by 5.5 = 0.09. So we can now go to the
equation and but the answer in, 2.5x2.2x0.09=0.495. I think the square would be better for a water feature because it would fit better and not be
as wide, it would also be a good size, if I chose the rectangular prism it would be a lot wider and longer but not that tall which is pretty annoying I
chose the square because it would be the easiest to build and it would be easier to get the measurements but a circle would be super hard. For my part
b I have chosen the square prism because it would fit better, be easier to get measurements and it would be taller that

Notes On The Physics Of Physics
Overview During my time in physics, I have learned a variety of topics, equations, formulas, and ideas that further continue my intelligence and
learning when it comes to my life. However, there has always been something in nature that has always gripped my attention more than anything
else. Water. Water as a general concept is something that is truly a miracle for life. It allows all living creatures to survive through drinking, bathing,
and an overall healthy and happy life for all. Because of this, I was able to derive the law from two different scientists regarding this topic. One of
which was Evangelista Torricelli(Galileo's assistant), who was able to derive Torricelli's law v2 = 2gH, in where g represents the acceleration due to the
... Show more content on Helpwriting.net ...
The total amount of water I chose to fill the bottle with is approximately 1700 mL since above that level of water the bottle shape begins to change.
I chose to measure 100 mL differences for water volume differences in order to achieve a total range of numbers between 500 and 1700 mL. I also
determined that at 1700 mL, the flow rate allowed for the water to drain nearly 100 mL over the 5 seconds recorded. If I used a value that was less
than 100 mL, I would find that one trial would go into another trial. I chose use a period of 5 seconds for a few reasons. This period allows us to
collect a vast range of data for the amount of drainage, between the values of 27 and 96 mL. If I used a longer duration, like for instance, 10
seconds, I would find that the amount of water drained would be roughly between the values of 50 and 200 mL, which would go into the other
trials. The reason why I did not choose a value less than 5 seconds was because such a small value would greatly amplify the problem of my
reaction time. Also, the values collected would go between 5 mL and 25 mL, which would be too small for this experiment to work. Finally, I chose
to use 6 trials for each condition. Materials: thumb tack Two Two Liter Bottles Water Stopwatch String Scissors Ruler tape Procedure: 1) Poke a hole
into the bottle with the thumbtack 2) Make a hole in the two liter bottle about 10 cm from the bottom. 3) Fill the bottle with water so that

Research Paper On Ford Mustang
The Ford mustang
Lee Iococca had asked his team to create a new 2 seat vehicle. He needed a car that would give all the other European cars and the American
Chevrolet Corvette a run for their money. Iococca was the General manager of Ford. Donald Frey and his design team formed the project which was
called the T–5. Lee was anxious about this car because his last car, The Ford Thunderbird had not been quite as much of a success. Lee Iococca did
not enjoy the work that was happening and hired Davis Ash and his design team who renamed the project the "Mustang" . The mustang became a big
hit and gave credit to Davis and his team for the succes.
The Beginning The Ford Mustang was released five months prior to the start of the 1965 production year. ... Show more content on Helpwriting.net ...
The Ford Mustang ultimately set the standards for all of the manufactures attempting to dethrone the mustang. Ford's Mustang has made a difference
in the cars we buy today. It created a class called "pony car" which meant affordable sporty cars with long hoods and short rear decks. The Mustang
gave inspiration to competitors to create cars such as the : Chevrolet Camaro, Pontiac Firebird, Chrysler's Plymouth Barracuda, and the first generation
of the Dodge Charger. The mustang has been credited for inspiring the designs of other coupes imported to

Sample Exam 324 3
Management Accounting
Use the data below to answer questions 1 through 3.
The following data for ABC Ltd pertain to the production of 3,000 skate gaurds during April.
Direct Materials (All materials purchased were used):
Standard cost: $9.00 per meter.
Total actual cost: $5,985.
Standard cost allowed for units produced was $5,400.
Materials efficiency variance was $270 unfavourable.
1) The flexible budget amount expressed in number of input units per output unit is: a) 0.20 meters
b) 0.21 meters
c) 0.19 meters
d) 600.00 meters
e) None of the above
2) The materials price variance is: a) $855 favorable
b) $315 favorable
c) $855 unfavorable
d) $315 unfavorable
e) None of the above
3) The actual cost per meter is: a) $10.500
b) ... Show more content on Helpwriting.net ...

b) $ 9,020.
c) $ 10,400.
d) $ 12,100.
e) $ 1,461.
16. In terms of conversion costs, what was the percentage of completion of the ending work–in–process inventory?
a) 37.1% complete
b) 50.0% complete
c) 64.5% complete
d) 40.0% complete
e) 31.6% complete
17. What is the cost of ending work–in– process inventory using a weighted average process costing system?
e) $56,700
f) $55,000
g) $35,500
h) 24,000
i) None of the above
Use the following data to answer questions 18 and 19.
A business uses the reciprocal method to allocate service department costs to the manufacturing departments. Assume there are two service departments
and two manufacturing departments, as shown below:
Service
Departments
Manufacturing Departments
Purchasing.
I.T.
Machining
Finishing
Costs

$200,000
$212,000
$247,000
$312,000
Parts used
20,000
9,000
20,000
30,000
# of transactions
10,000
4,000
8,000
45,000
18. Purchasing costs are allocated based on parts used, and I.T. costs are allocated based on the number of transactions. Total IT costs to be allocated
is expressed by which of the following equations:
a) IT = 212,000 + 2/9 P
b) IT = 212,000 + 9/59 P
c) IT = 212,000 + 4/67 P
d) IT = 212,000 + 9/50 P
j) None of the above
19.
The total service department costs allocated to the manufacturing departments will be:
a)

Higher using the direct method of allocation
b)
Higher using the step down method of allocation
c)
Higher

Sea Water: What Does Desalination Mean?
water and increase the amount of it. However, it thought about desalination plant. What does desalination mean? Many people do not know the
meaning of desalination and it is important to know the meaning to confident them when they use the water after desalination. It is the process of
removing salt and any gas from seawater to be valid for drinking, watering, manufacturing and so on. The desalination plant has major challenges,
which is the high cost because they need to use a high–level technological to remove the gas and the salinity of the water. In addition, the water after
the process needs to test to be sure about the validity of using it. The UAE has desalinated seawater because they cannot use the water directly, it
consists salt and

Laboratory Techniques &Amp; Measurements

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Ähnlich wie Laboratory Techniques &Amp; Measurements

Ähnlich wie Laboratory Techniques &Amp; Measurements (20)

Mehr von April Lacey

Mehr von April Lacey (16)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

Laboratory Techniques &Amp; Measurements