Attached is the revised 2012 presentation for Hum specification training. If you have any questions about this presentation feel free to reach out to alibia.devente@gmail.com
20. Steps to create your custom Cluster.
1. Select the appropriate starter personal space:
2. Select extension personal spaces to complete the basic
shape of your configuration.
3. Select Meet Me spaces: central, end, and touchdown
surfaces.
4. Select returns.
5. Select terraces: low, box, and elevated.
6. Select screens.
7. Select storage.
8. Select modesty panels.
9. Select power and data components.
10. Select accessories.
21. Steps to create your custom Hum cluster:
1. Select the appropriate starter personal space.
Page 20, 42, 43 & 44.
2. Select extension personal spaces to complete the basic shape
of your configuration. Page 20,41 or 42.
29. Planning Factors for Elevated Terraces
120° elevated terrace
* It is not possible to use an
elevated terrace on a single dual-
sided personal workspace in the
center of two 120° elevated
terraces.
120° elevated terrace – starter dual sided terrace – 120° elevated
terrace
43. Kimball Office
Resources
Dealer Sales Manager
Sales Specialist
Customer Care/ By Design
800.482.1818
Product Technical Support
800.481.6696
Regional Product Specifier
Alibia de Vente
Market Education
770.265.4006 or
Alibia.devente@kimball.com
44. A stand-out singular
furniture source.
• Kimball Office provides furnishings for an
integrated, seamless flow from private
office to collaborative space, reception area
to cafeteria
• Solutions for multiple workplace
applications and industries
www.kimballoffice.com
45. This author of this presentation is Alibia de Vente,
as part of the Market Education team of Kimball
Office. If you have any questions/ comments
please email alibia.devente@kimball.com
www.kimballoffice.com
Hum
Hinweis der Redaktion
All images are taken from public sources of content provided by Kimball Office. The sources of content include assembly instructions, pricelists and website references.
Four Key Elements, page 3.
Four Key Elements, page 3.Personal Workspace is required. Surface is cut towards the user. Surfaces are adjustable during installation for a variety of needs.
Four Key Elements, page 3.The low shelf terrace or box terrace is required.- Terraces create an importance of what you are working on that is important. Upper terrace is optional. Each side size can differ based on use. A low shelf can be used in combination to a box shelf either in the left or right position. Terraces must span entire surface minus and returns or meet me’s.
Four Key Elements, page 3.See Me™ screens are available is 4 fun organic shapes like terrain, foliage, wave and gem. You may request the neonet as a special from customer care. Central screens are covered in felt in either a low, mid and full-height option for privacy. Screens are not required however when specified they match the width of the terrace.
Four Key Elements, page 3.Meet Me spaces are for creating collaboration in the work environment. Meet Me spaces can also support technology. In lieu of a meet me space you may want to consider a return.
Sustainability Facts, page 4.- Hum is recyclable at the end of life.- Meets USGBC LEED indoor air quality requirements.- Powder coat process is virtually VOC free and nearly 0% waste.
Statement of Line, page 8.
Statement of Line, page 9.
Statement of Line, page 10.
Statement of Line, page 11.
Statement of Line, page 12.
Statement of Line, page 13.
Overview, page 12.- Surfaces have a knife profile.
Hum Dimensions, page 13.The support outlined is for a dual and 120° stations.Worksurface heights can be adjusted anywhere between 24” and 30”. Initial height is set at 28 ¾”. Worksurface adjustments can be made with a 5mm Allen wrench.*This page is marked with a post-it as it is a critical page as a specification reference.
Hum Dimensions, page 14.Notice the floor support. Single-sided units cannot connect to dual or 120° stations. *This page is marked with a post-it as it is a critical page as a specification reference.
Typical Configurations, page 15.- The average cost of a typical cluster is comparative to a cluster of typical workstations. - Do remember that options and finishes can effect cost.
Follow these steps to create your custom dual-sided , 120⁰ or single-sided cluster.
Steps to create your custom cluster:Personal Workspaces dual and single sided are available in 62”, 70” & 82”. 120° personal workspaces are available 62” and 72”.Extension surfaces are available in the same dimensions. You cannot connect a single sided unit to dual or 120° however dual and 120° can be connected.
Hum Power & Data, page 21. The number of electrical/ data ports depend on the width of your personal workspace. The number of ports facing the user is the same facing the floor. Electrical is simply laid into the trough. Cables can be tied to the structure with cable ties. Cords are routed within the layers of the workstation.
Stand-Alone Personal Spaces, page 22. Options include a return left or right. Grommets can be position left, right or center. This is a private office solution given the very contemporary aesthetic of this product.
Steps to create your custom cluster:You cannot place a Meet Me and Return in the same position.3. Central and End Meet Me spaces mount at 31 1/8”. Touchdown Meet Me spaces mount at the same height as personal spaces to provide a collaboration space at the end of a cluster. Adjustable to 24” to 30” similar to a personal workspace.4. Returns mount at the same height as Meet Me surfaces and are placed in the same position.
How to Specify a Return Return sizes do not have to match as shown. You may use a 67” on one side with an 82” on the other or a mini return. Bracket specification should be a edge and end at the end of a cluster. A mini-return ships with an edge bracket. A return must be used on both sides to cover the center support where electrical and data are located. Having a return, central or end meet me changes the width of the low or low box terrace.
How to specify a Return Return sizes do not have to match as shown. You may use a 67” on one side with an 82” on the other or a mini return. Bracket specification should be a edge and end at the end of a cluster. A mini-return ships with an edge bracket. A return must be used on both sides to cover the center support where electrical and data are located. Having a return, central or end meet me changes the width of the low or low box terrace.
Low, Box and Elevated Terrace, page 25-27.- Terrace sizes are 24,30,34 and 40. The size used will vary based on personal workspace.- Single or dual-sided low terrace.- Single-sided mini low terrace is used when a modesty is not used.
Elevated 120° Terrace, page 23.Low shelf is required. Elevated terrace comes with screen that is spray adhered onto steel.
There is a science behind the screen ratio in contrast to the visible background. Creating a specific design can be accommodated however there are design parameters.
Kimball Office Resources- On kimballoffice.com we offer a comprehensive information regarding products and services by our organization. If you do not know your regional product specifier that introduction can be made for you. A copy of today’s presentation and support materials will be provided after this web conference as follow-up.