1. DESIGNING OF
SKIRT CASE STUDY
PRESENTED BY :
KHUSHBOO KHUNTWAL
B. Sc. FT. 1ST YEAR DIPLOMA
FASHION TECHNOLOGY

2. DESCRIPTION OF GARMENT FABRICS NOTIONS
MEASUREMENTS :
2 metallic hooks
2 metallic eyes
1 metallic zipper 3”
FABRIC NEEDED:-
Dezyne E’Cole College,Ajmer
Submitted By :-
Khushboo Khuntwal
1st Year Diploma FT
SUITABLE:-
UNSUITABLE:-
METRIC IMPERIAL
SKIRT LENGTH
BODY MEASUREMENT
GARMENT MEASUREMENT
ROUND WAIST
ROUND HIP
261/2”
36”
HIP 39”
SMALL MEDIUM LARGE SMALL MEDIUM LARGE
CASE STUDY : 1
7 Pieces
a line, skirt with attached gores,& panels.
skirt attached waist belt.with
Cotton Polyester, Cotton ,soft
Denim Blended fabric
Silk ,Nylon, Organdy, net.
METRIC IMPERIAL
37” 401/2”
24” 28”
35” 38”
Hosiery.
60
87.5
92.5
66.1/4
90
97.5
70
95
101.1/4
21”20” 22”50 52.1/2” 55
60”150

3. DETAIL OF DRESS
In this case study I have given the details of the design ,and have
included the following details :-
Flat Design :- An a line silhouette.
The skirt is a basic a line skirt with a 2’’waist band.
Measurements :- The measurement chart for a medium (34’’) size,
female. Seam allowances have also been given.
Notions :- Zips, buttons, threads, and other requirements
are given in details.
Drafting Patterns :- 7 patterns are required for drafting. They are
in 1/8’’ Scale.
Estimation Sheet :- (60”)1.53 meter of fabric is required for the
construction of the garment.
Fabric :- 100% pure cotton fabric.
Color :-
Seams :- welt, single top, abouted seam are used.
white with rad dot colour.
DETAIL OF DRESS

4. DEZYNE E’ COLE
PATTERN DRAFTING & GREADING
CASE STUDY NUMBER - 1
STYLE NOUMBER - 1 COLOUR- RED WITH WHITE STRIP
FABRIC TYPE – COTTON FABRIC YARDEGE OF FABRIC – 36”
PRODUCT TYPE – WOMENS WEAR SAMPEL SIZE – 34” MEDIAM SIZE
DESIGN OF GARMENT
FRONT PART
DESIGN OF GARMENT
BACK PART

5. MEASUREMENTS REQUIRED SEAM ALLOUNCE
SKIRT FRONT & BACK PART
SKIRT BELT ½”
SKIRT HEM 1”
SKIRT LENGTH 21” SIDE SEAM ½”
HIP LEINGTH 7” GORES ½”
FRONT DART LENGTH 3 ½” PANELS ½”
BACK DART LENGTH 5 ½” SKIRT UPPORE
PORATION
¼”
FRONT &BACKHIP LINE 9 3/8”
REMARKS
WAIST BELT WIDTH 2” SEAMS WELT, SINGLE
TOP, ABOUTED
FRONT WAIST LINE 6 ¾” HEAMLINE A LINE
BACK WAIST LINE 6”
C. F. PRINCESS LINE 2 ¾”
C.B. PRINCESS LINE 25/8”
EDGE FINISHINGGORES LENGTH 14”
PANEL LENGTH 7”
TRIMS
SKIRT HEM WELT SEAM
ZIPPER 1 SKIRT BELT SINGLE TOP
HOOK & EYES 2 NEEDSLE NO. 18
SIZE NEEDLE SIZE
TYPE OF MATIRIYEL METALIC THREAD
COLOUR
RAD
THREAD NO. 081
THREAD
MATERIAL
COTTON
STITCH PER
INCH
8

6. 2D AND 3D PATTERN OF SKIRT
FRONT VIEW BACK VIEW SIDE VIEW
{NOTE:- ALL SIDES OF SKIRT AND
BELT PATTERN SEAM IS 1/2”}

7. MARKER MAKING OF SKIRT
WIDTH OF TABLE 57”
LENGTHOFTABLE72”
SMALL ,MEDIUM AND LARGE PATTERNS ARE LAID ON A
57” WIDE TABLE THIS IS USED FOR MARKER MAKING .
THE TOTAL LENGTH REQUIRED IS 72”

8. width of fabric 36”
lengthoffabric60”
LAYOUT OF SKIRT

9. ESTIMATION OF FABRIC FOR LOWER PART SKIRT
60” length for white stripe on rad base.
fabric needed for skirt 1.53 meter.
2 gores & panels with belt {front & back part }

10. FRONT PART
BACK PART
SPECIFICATION SHEET
belt finished with hook
attached metallic eye
metallic
slit o ningpe finished with metallic zipper
a line hemline finished with single top seam
front dart length 3 1/2”
space between dart 1/2”
right & left side dart width 5”
gores
panel
belt finished with hook
attached metallic eye
metallic
slit o ningpe finished with metallic zipper
a line hemline finished with single top seam
back dart length 51/2”
space between dart 1/2”
right & left side dart width 4.12”
gores
panel

11. PRODUCT SPECIFICATION
doted fabric
metallic
zipper
lower panel
waist belt
FRONT & BACK DART
WELT SEAM
SINGLE TOP SEAM
ABOUTED SEAM