1. Digi-Pas TM Digi-Pas TM Digital Level Applications
A Ventura Group of Companies
ON/OFF: Turn on/off device
USER MANUAL
LCD Digital Display
DIGITAL LEVEL
DWL80E (0.1° Resolution)
Aluminium
Structure
® Registered Design
Alternate Zero
Magnet Vial
MODE: Select 0.1° or %
Freeze Display CAL: Calibrate the device
value & store the calibration value
Product of Singapore value in the memory ® Registered Design
CALIBRATION INSTRUCTIONS CALIBRATION PICTURE For first time usage, remove the plastic strip to WARRANTY
connect the battery.
STEP 1 The Digi-Pas™ Digital level is warranted to the original
1.(a). Push Once on the CAL button, “CAL 1” blinks. purchaser to be free from defects in workmanship and material.
JSB Tech will, at its option, repair or replace any detective part
(b). Place DWL80E on a flat & clean surface which may malfunction under normal and proper use within a
(e.g. Table) period of 1 (one) year from the date of shipment. The foregoing
warranty shall not apply to defects resulting from misuse, abuse
or transfer by the Buyer, Buyer-supplied software or interfacing,
2.(a). Press MODE, display counts down from unauthorized modification or operation outside of environmental
E.g Table Surface Push Once “ CAL”
10,9,8.......1, “CAL 2” blinks. specifications for the product. JSB Tech does not warrant that the
operation of the instrument software, or firmware, will be
(b). Place DWL80E reverse horizontal (180°) Press STEP 2 uninterrupted or error free. The exclusive remedy under any
and all warrants and guarantees, expressed herein, and we shall
MODE, display counts down, “CAL 3” blinks. a.
not be liable for damages from loss or delay of equipments uses,
CAL consequential, or incidental damage. No other warranty is
(c). Place DWL80E vertically (-90°). Press MODE expressed or implied. JSB Tech specifically disclaims the
button, display counts down, “CAL 4” blinks. implied warranties of merchantability and fitness for a
particular purpose.
(d).Place DWL80E reverse vertically (+90°). Press
Press Mode button Once
MODE button, display counts down.
b.
180°
CALIBRATION DONE.
NOTE: Ensure DigiPas device is kept still during
calibration.
CAUTION c. 90°
90°
Manufactured by
JSB TECH Pte Ltd
DigiP as device is calibrated in the factory for Press Mode button Once
maximun accuracy. User can re-calibrate when Press Mode button Once
CAL
necessary. Remove Screw to remove battery from the Tel: 65-67780640 / Fax: 65-67770460
Email: jsb-sales@jsbtech.com
compartment
www.digipas.com