There are a number of engineered hardwood floors, of various timber species and various ply base qualities. In simple terms, an engineered hardwood floor has a stable hardwood top covering of 5/6mm thick and a plywood base part of 14/15mm thick. These are boards are not to be wrongly identified as low quality laminate floors wood floors, in reality quality engineered hardwood planks are generally more expensive compared to solid planks.

1. Why Do I Need Engineered Hardwood Floorboards?
There are a number of engineered hardwood floors, of various timber species and various ply
base qualities. In simple terms, an engineered hardwood floor has a stable hardwood top
covering of 5/6mm thick and a plywood base part of 14/15mm thick. These are boards are not
to be wrongly identified as low quality laminate floors wood floors, in reality quality engineered
hardwood planks are generally more expensive compared to solid planks.
How Do I identify A Quality Engineered Hardwood Board?
That you need to research and be conscious of the details as well as board spec. You can expect
the UK primarily the finest quality of engineered hardwood Floors that exist called ‘STRATA’.
You can be positive of the quality because of the upcoming manufacturing facts:
a. It is using boiled examined, Latvian ply for our wood base. This is actually the top quality ply
board available in the earth and it is the almost all steady. Boiled examined, means that the
plywood has been through various warmth-managed checks to guarantee stability in severe
circumstances. Your panels will forever remain flat and stable.
b. The whole Strata engineered hardwood planks are made right here in United Kingdom, they
are not brought in from China or somewhere else. High quality type of flooring is created using
top of the range Machines but skilled British builders and machinists.
c. People utilize kiln dried French and European oak floor our 5mm top layer that is pressed and
plastered using specialist flexible adhesives to the Birch ply board base.
d. It has good long lengths up to 4m long.
There is certainly much argument over this topic. Most fitters as well as contractors play risk-
free and insist on engineered boards, however you do not constantly need an engineered panel
and a solid wood floorboard could be suitable. Here are variety aspects to consider assisting
you determine:

2. a. Fitting onto concrete floor:
In case you are fitting, a wood floor on top of cement you will need to either fit to batons or
even cover the concrete with a paint primer and humidity layer right after taking a humidity
reading. In case your humidity substance reading is approved and a moisture filter is used, then
reliable oak panels may be attached as a floating floor immediately onto the concrete
(140-220mm wide). If you are still worried about wetness in the concrete, in that case installing
onto batons is a good choice. Of course, the alternative is to choose an engineered wood floor.
b. Installing above under floor heating:
Everyone simply advise you generally to utilize an engineered table for all under floor heating
systems.
c. Fitting large plank boards:
We suggest you to decide on engineered hardwood planks for board sizes over 240mm wide to
avoid attainable cupping. If you decided to solid correct your boards then a solid 240-300mm
board should stay strong supplying you have utilized all the necessary safeguards. In case you
are floating or secret nailing your wood floors floor, then you are better off choosing panels no
broader than 240mm.
Steve Macarthy is specialized in salvaged wood floors and Engineered Hardwood floors. For
more information, please visit www.reclaimedflooringco.com