The Terminal Shield brurst all the Arduino to convenient screw terminals and making it easy to connect external wires without using soldering. It is the best for hasty experiments or strong connections!

1. The Terminal Shield for Arduino
The Terminal Shield brurst all the Arduino to convenient screw tminals and making it
easy to connect external wires without using soldering. It is the best for hasty
experiments or strong connections!
The middle part of the shield is a giant prototyping part that permit you to add parts
of your own project. A blue color LED show your Arduino is ON, and there also has
red and green general-purpose LEDs with the stream-limiting resistors. The Terminal
Shield is supporting all components, which already fitted as surface-mount parts and
you can start using it now. We can provide it on your best robotic kitsonline.
Features
• Arduino 1.0 / "R3" layout cleave all 30 pins on current Arduino boards to
screw terminals.
• Plus 6 extra pedal terminals giving additional place and 5 screw connections
(B1-B5) to the prototyping area.
• Gold-plated surface: soldering easily and very resistant to finger oil.
• Stackable headers is lightly connect other shield on top.
• Large prototyping area through plated holes.
• Simply tagged GND and 5V beside prototyping area.
• Automatically Blue LED ON at surface-mount.
• 2 × 100nF power supply capacitors pre-fitted as surface-mount parts.
• Reset button wired via the Arduino so you can reset it even with the shield
mounted over the top.
• Overlay printed on both the top and the bottom of the board so you don’t have
to turn it over to see what you’re soldering onto.

2. • 3 general-purpose surface-mount LEDs (red, green, blue) with current limiting
resistors.
• Sexy rounded corners.
Reference:
http://techieshop.mywapblog.com/the-terminal-shield-for-arduino.xhtml