1. Faculty Adviser : Dipti raval mem
Submit by :11CL155
11CL153
11CL154
11CL156
10CL043
2. INTRODUCTION
A crane is a type of machine, generally
equipped with a hoist, wire ropes or chains,
and sheaves, that can be used both to lift and
lower materials and to move them
horizontally.
It uses one or more simple to create
mechanical advantage and thus move loads
beyond the normal capability of a human.
4. Main Basic Lifting Parts Of The Crane:
Lever
Pulley
The hydraulic cylinder
A balance crane contains a horizontal beam (the
lever) pivoted about a point called the fulcrum.
A jib crane contains a tilted strut (the jib) that supports
a fixed pulley block. Cables are wrapped multiple times
round the fixed block and round another block
attached to the load.
For stability, the sum of all moments about any point
such as the base of the crane must equate to zero.
7. (a) is used primarily for raising or lowering a
freely suspended load;
(b) is capable of travelling over a supporting
surface without the need for fixed runways
(including railway tracks); and
(c) relies only on gravity for stability, with no
vertical restraining connection between itself
and the supporting surface, and no horizontal
restraining connection (other than frictional
forces at supporting-surface level) that may act
as an aid to stability.
Uses of mobile crane:
8. Heavy lifting for tall
buildings
Max. unsupported height
typically 265’ (80 m)
Much greater heights
when supported by
building’s framework
10. • This type of crane is
similar to the bridge
crane except that it runs
on a runway at the floor
level. The bridge is
supported by a pair of
rigid steel legs which are
carried by a pair of end
trucks along the floor
level runway.
11. Specifications:-
Lifting Capacity: 5 tones to 10 tones
Working Radius: 23 m
Use:
In the construction of Bridge superstructure for
lifting heavy girder.
In Ship manufacturing industry ,for lifting heavy parts
of ships.
12. • This type of crane consists of a
pivoting head and boom
assembly which carries a hoist
and trolley unit.
• Lifting Capacity: 1 to 300
tones
• Working Radius: 70m
• Use: Jib crane used in ship
yards for lifting heavy
machinery and equipment,
weighing 100 to 300 tons.
13. It is the cranes mounted on a rubber tire truck
will provide great mobility.
• Lifting capacity: 20 to 30 tones
• Working Radius: 15m to 20m
• Use: It is used for the loading and unloading of motor vehicle
rolling stock, for cargoes primarily of a heavy and single-item
nature, and also for construction and repair work.
14.
15.
16. • Overhead Crane can build top running cranes,
under running cranes, double girder cranes,
and single girder cranes ranging from:
• Capacities - 1/4 ton through 100 tons
• Spans - 5' through 125‘
• Use: The most common overhead crane use is
in the steel industry.
28. Crane company in world
Ranking Crane company Country Operation area Biggest mobile crane
1 Mammoet Netherlands Worldwide PTC 200 DS
2 Sarens Belgium Worldwide SGC-120
3 Lampson International USA Worldwide Lampson LTL-3000
4 ALE United Kingdom Worldwide AL.SK350
5 Maxim Crane Works USA Worldwide Manitowoc 18000 Max-er
6 All Erection & Crane Rental USA Worldwide Manitowoc 21000 Max-er
7 Tat Hong Holdings Singapore Worldwide Terex Demag CC 8800-1
8 Sanghvi Movers India National Liebherr LR 1750
9 Al Jaber Heavy Lift & Transport UAE Worldwide Terex Demag CC 8800-1 Twin
10 Essex Rental Corp USA Worldwide Manitowoc 888 Ringer
11 Prangl Austria Continental Terex Demag CC/TC 2800
12 Mediaco Lifting France Worldwide Terex Demag CC 2800
13 Weldex Scotland Worldwide Liebherr LR 11350
14 Tiong Woon Crane & Transport Singapore Asia & Middle East Terex Demag CC 8800-1
15 Sarilar Heavy Lift & Transport Turkey Worldwide Terex Demag CC 8800-1
16 MIC Corporation Japan National Terex Demag CC 8800-1
17 Deep South Crane & Rigging Company USA National TC-36000 Versacrane
18 ABG Infralogistics India Continental Terex Demag CC 6800
19 Uchimiya Transportation & Engineering Japan National Terex Demag CC 6800
31. Slewing unit mounts at
top of mast (tower)
Cat-head, jib, trolley,
machinery arm, ties, &
operator’s cab
Machinery arm contains
motors, electronics, cable
drum, and counter weight
33. Crane buy from ahemedabad
Nilkanth Engineering Works, Ahmedabad
Address: Plot No. 5503/2, G.I.D.C.,
Vatva, Ahmedabad - 382 445,
Gujarat, India Phone: +(91)-(79)-
25835553
1 st company proposal
34. Feature: Tower Crane Condition: New Application: Construction
Rated Loading Capacity: 10T Rated Lifting Moment: 1600KN.M Max. Lifting Load: 200m
Max. Lifting Height: 190M Span: 65m Place of Origin: Henan China
(Mainland)
Brand Name: UNIQUE Model Number: QTZ160(6516) Certification: ISO
Warranty: More than one
year
After-sales Service
Provided:
Engineers available to service machinery
overseas
Hoisting Speed: 100/50r/min
Slewing Speed: 0.6r/min Luffing Speed: 60/30/10m/min
Crane company name: Zhengzhou Unique Industrial Equipment Co., Ltd.
35. Main Parameters of QTZ160 Tower Crane In India :
Model: QTZ160(6516)
Radius: 65M
Hook Height: 50M
Max. height: 190M
Max. hoisting Capacity: 10T
Standard Mast Section Size: 1.935x1.935x2.8M
Hoisting Speed: 100/50r/min
Slewing Speed: 0.6r/min
Lifting Speed: 60/30/10m/min
Cost : 98000 US $
36. 2 nd company proposal
Stacker's And Mover's India Manufacturing Company
Address: Plot No. 1 - 5 / B, Phase - 2, G. I.
D. C., Near Winzol Railway
Crossing, Vatva, Ahmedabad -
382445, Gujarat, India
Phone: +(91)-(79)-25894688
Preferred Number: 08447568934
37. Crane company name: Shandong Huaxia Group
Feature: Tower Crane Condition: New Rated Loading
Capacity:
6t
Rated Lifting
Moment:
760 Max. Lifting
Load:
6t Max. Lifting
Height:
140m
Span: 50m Place of
Origin:
Shandong China (Mainland) Brand Name: huaxia
Model Number: QTZ63(5013) 6t Payment
terms:
30% TT, 70% LC Guaranty period: 1year
Delivery time: 20days
38. Name Unit Parameters
Nominal hoisting moment kN.m 760/870
Max. Hoisting weight t 6
Rated hoisting weight at jib nose t 1.3
Working radius m 2.5-50
Height (m)
Anchoring M 40
Climbing m 140
Hoisting speed
Magnification 2X 4X
Hoisting speed M/min
8 40 80 4 20
4
0
Max. Hoisting weight t 3 3 1.5 6 6 3
Swing speed R/min 0.6
Radius changing speed M/min 22/44
Top rising speed M/min 0.5
Tower crane weight
Net weight (anchoring)
T 31.4(32.9)
Ballast weight T 12
Total weight (anchoring)
T 43.4(44.9)
Working swing radius M 51.254
Rear swing radius M 12.06
Maximum working wind speed M/S 20
Maximum wind speed for top rising M/S 13
Ambient temperature °C -20~+40
cost : US $50,000 - 56,000 / Set
39. Crane company name: POTAIN Tower Cranes
Feature: Tower Crane Condition: New Application: all kinds of construction
Rated Loading
Capacity:
5T,6T,8T,10T,12T Rated Lifting
Moment:
500KN.m/630KN.m/800KN.m/1000KN
.m/1200KN.m
Max. Lifting
Load:
5T,6T,8T,10T,12T
Max. Lifting
Height:
120m/120m/150m/15
0m/150m
Span: 120m/120m/150m/150m/150m Place of
Origin:
Henan China (Mainland)
Brand Name: YUJIE Model Number: QTZ-63 Certification: CE,ISO,BV,SGS
Warranty: ONE YEAR After-sales Service
Provided:
Engineers available to service
machinery overseas
color: according to the customer's
requirements
XX: XSX
40. Type of Towe
r Crane
QTZ60 Series
QTZ63 (5013) QTZ63P (5010) QTZ63P (5011)
Metric Lifting
Moment (KN.
m)
630
Wokring Radi
um (m)
50 50 50
Hoisting Capa
city (T)
1.3-6.0 1.0-5.0 1.1-5.0
Hoisting
Independent
Stationary (m)
39 32 32
Height
Attached Stati
onary (m)
120 120 120
Hoisting 2 Fall 75/38/7 50.8/25.4/9 50.8/25.4/9
Speed 4 Fall 37.5/18.5/3.5 25.4/12/4.5 25.4/12/4.5
Slewing Spee
d (r/min)
0-0.6 0-0.64 0-0.64
Trolley Travel
Speed (m/min
)
38/19 38/19 38/19
Section of To
wer Mast (mm
)
1600x1600 1600x1600 1600x1600
Material of Ma
in Tower Mast
Section (mm)
∠160x160x16 ∠160x160x14 ∠160x160x14
Gib Upper Branch Seamless Steel Pipe Square Tube Square Tube
Lower Branch Square Tube Square Tube Square Tube
Cost : 86000 US $ , 85000 US $ , 82000 US $
41. Final crane selection : POTAIN Tower Cranes 10 T
Crane model no: QTZ63P (5010)
Price : 85000 US $ = 45,90,000 IND Rs in 54 rupee dollar price
+08,43,000 tax
Final price= 54,33,000 IND Rs