THE T3 CORK USED WITH A CUSTOM FLOOR APPLICATOR ON A PRECAST PARKING GARAGE WITH MANY HOLES TO FILL. TIME AND COST SAVINGS ACHIEVED. CONTACT WWW.T3CONSTRUCTIONINNOVATIONS.COM

1. T3 CORK
Custom application for a Parking Garage
by

2. Problem: several hundred core holes to be filled
quickly in newly erected parking garage.
Solution: use the T3 CORK to fill all the holes.
CORK stands for Concrete Opening Repair Kit
made by T3 Construction Innovations, Inc.

3. CORK assemblies with
threaded rod.
CORK sizes for 2.5” to 12.5”
diameter holes.

4. CORK assemblies can be used with
custom floor attachments as shown
here (custom plate with wingnut by
others). Please note the
reinforcement on sides of the hole.
Standard CORK Floor
Applicator with speed
nut shown here in
Yellow

5. Several CORKS
installed, awaiting
patch material.

6. Core hole filled 1” low so threaded rod could
be broken off below final top surface.

7. Hole patched according
to specifications.

8. Several holes
patched in a short
period of time by
one worker.

9. View of CORK from below,
offering a clean look.

10. To find out more about the CORK, go to
www.t3constructioninnovations.com
This slide show brought to you by
www.sandrapalone.net