Regression analysis: Simple Linear Regression Multiple Linear Regression
Specification air connectors
1. P0076-P0138-E0901.qxd
08.9.1 5:34 PM
Page 106
Rotary One-touch Fittings
Standard Type/High Speed Type
Series KS/KX
Cassette
The male connector is equipped with a
“tuberotation prevention mechanism”.
Series KS
Blue
Series KX
Light grey
Slide bearing
Smooth operation and longer life from an
oil containing slide bearing.
Rotary seal
A special rotary seal minimizes friction while
providing an excellent seal.
Series KX (High speed)
Scraper
Holder
Prevents chips from intruding
into bearing parts.
Standard nickel plated allows copper-free applications.
Rotary seal
Ball bearing
A ball bearing ensures low torque rotation.
Stud
b
b
Electroless nickel plated
With thread sealant (R thread only)
Low torque rotation style
Rotary One-touch fittings
Applicable to use for
oscillating and rotating
sections in robots.
Copper-free specifications
Brass parts are all
electroless nickel plated.
Sealant is standard.
Series KS
(Standard)
X ring shape minimizes
Ball bearing
friction while providing an
excellent seal. Seal is fire
A ball bearing ensures low torque
and shock proof fluorine
rotation. Stainless steel 440C
rubber. Proves against high
improves corrosion resistance.
friction heat in high speed
rotation and longer life.
∗ Other parts’ specifications are same as those
of Series KS.
Applicable Tubing
Tubing material
Tubing O.D.
FEP, PFA, Nylon, Soft nylon, Polyurethane
ø4, ø6, ø8, ø10, ø12
Specifications
Fluid
Operating pressure range (1)
Proof pressure
Ambient and fluid temperature
Thread
Air
–100 kPa to 1 MPa
3 MPa
–5 to 60°C (No freezing)
JIS B 0203 (Taper thread for piping),
JIS B 0205 (Metric coarse thread)
Note 1) Please avoid using in a vacuum holding application such as a leak tester, since there is leakage.
Also, when using in a vacuum, grease may enter the inside due to the nature of its construction.
Rotating Torque/Allowable Number of Rotations
Applicable tubing O.D.
Rotating torque (N·m) (2)
Allowable number of rotations(S-1) (3)
Male elbow
Series KS
Series KX
ø4
0.006
8.4
25
ø6
0.012
8.4
20
ø8
0.014
6.7
20
ø10
0.020
5
16.7
ø12
0.022
4.2
16.7
Note 2) Rotating torque under pressure 0.5 MPa
Note 3) Number of rotations per second
Principal Parts Material
Male connector
106
Principal parts
Body
Stud, Holder, Guide
Chuck, Retainer
Collet, Release button, Snap ring
O-ring, Packing
Rotary seal
Slide bearing
Scraper
Ball bearing
Gasket
Series KX
PBT
C3604 (Electroless nickel plated), Stainless steel 304
Stainless steel (Stainless steel 304) (Retainer (C) of Series KX: C3604 (electroless nickel plated))
Polyacetal
NBR
FKM
NBR
Oil-containing polyacetal
—
NBR
—
Bearing steel
Stainless steel 440C
Stainless steel 304, NBR
Series KS
2. P0076-P0138-E0901.qxd
08.9.1 5:34 PM
Page 107
Rotary One-touch Fitting
Series
KS/KX
Series KS/Series KX
Model
Male connector
KSH
KXH
Connection thread
ø4
Applicable tubing O.D. (mm)
ø10
ø6
ø8
ø12
M5 x 0.8
M6 x 1
R18
K„
R14
M„
R
38
H„
R12
Male elbow
KSL
KXL
KK
M5 x 0.8
D„
M6 x 1
MS
R18
R14
LQ
R38
MQR
R12
T„
Precautions
Be sure to read before handling.
Refer to front matters 58 and 59 for Safety Instructions and
pages 13 to 16 for Fittings and Tubing Precautions.
Caution
1. Implement the tube piping in such a way that lateral load should not be applied on the ball
bearings at the rotating part, otherwise it may adversely affect the life expectancy.
A flexible polyurethane tube is recommended when lateral load is applied.
2. Do not use in an environment where it will be exposed to water.
Contact with water will cause outflow of the lubricating oil used in the ball bearings, and adversely
affect rotating performance and equipment lifespan.
3. Fluorine grease is used on the rotating portions.
107
3. P0076-P0138-E0901.qxd
Series
08.9.1 5:34 PM
Page 108
KS/KX
Male connector: KSH (Standard)
Applicable Connection
<M5, M6>
thread
tubing O.D.
(mm)
R
M
M5 x 0.8
4
M6 x 1
18
M5 x 0.8
6
<R>
8
M6 x 1
18
14
18
14
38
14
10
12
38
12
38
12
Model
KSH04-M5
KSH04-M6
KSH04-01S
KSH06-M5
KSH06-M6
KSH06-01S
KSH06-02S
KSH08-01S
KSH08-02S
KSH08-03S
KSH10-02S
KSH10-03S
KSH10-04S
KSH12-03S
KSH12-04S
H
(width
across D1 D2
flats)
8
10.4 12
12
8
12.8 14
14
17
15.2 17
22
18.5 22
24
20.9 24
L
36.5
37
37.1
37.5
38
38.6
42
43.1
46.5
46.9
53.5
53.9
56.6
55.9
59.1
Min. Effective area
Mass
(mm2)
A ∗ M port
(g)
size Nylon Urethane
33
34
33.5
34
35.5
36.5
40
41
41.5
48
48.5
49.5
50.5
52
16 2.5 4.0
4.0
<M5, M6>
Applicable
tubing
9
14
17
2.5 4.0
3 5.6
4
18.5 6
21
7
22
8
4.0
5.6
12
17
23
23
26.1 18.0 29
37
55
36.3 29.5 63
81
75
46.1 16.1
92
10.4 10.4
Connection thread
<R>
Applicable
tubing
∗ Reference dimensions after R thread installation.
Connection thread
(With sealant)
Male Connector: KXH (High speed)
Applicable Connection
<M5, M6>
thread
tubing O.D.
(mm)
R
M
M5 x 0.8
4
M6 x 1
18
M5 x 0.8
6
<R>
8
M6 x 1
18
14
18
14
38
14
10
12
38
12
38
12
Model
KXH04-M5
KXH04-M6
KXH04-01S
KXH06-M5
KXH06-M6
KXH06-01S
KXH06-02S
KXH08-01S
KXH08-02S
KXH08-03S
KXH10-02S
KXH10-03S
KXH10-04S
KXH12-03S
KXH12-04S
H
(width
across D1 D2
flats)
8
12
8
14
17
22
24
L
38.5
10.4 13 39
39.1
39.5
40
12.8 15
41.1
44.5
45.1
15.2 18 48.5
48.9
57.5
18.5 23.5 57.9
61.1
58.9
20.9 26
62.1
Min. Effective area
Mass
(mm2)
A ∗ M port
(g)
size Nylon Urethane
35
16 2.5 4.0
4.0
2.5 4.0
3 5.6
4.0
5.6
Applicable tubing
11
16
36
36
17
38
4
39
42
43 18.5 6
44
52
<M5, M6>
21
53
54
22
55
7
8
15
20
26
28
26.1 18.0 34
42
68
36.3 29.5 76
94
88
46.1 46.1
105
10.4 10.4
∗ Reference dimensions after R thread installation.
Connection
thread
<R>
Applicable tubing
Connection thread
(With sealant)
108