2. Validity and Terms of Delivery
This price list is valid as from 1 October 2011.
It supersedes all previous price lists.
Over a net goods value of EURO 500.00, orders are delivered free of charge to buyer's address
in Germany and over EURO 1000.00 to neighbouring countries.
In this manual, prices are determined by means of the stated value points (WP).
Retailers calculate their individual selling prices with the aid of a conversion factor.
A special conversion factor applies for articles marked *) and #).
Electronic data
For computer-aided kitchen planning, the data in this sales manual
are available on demand from the company Dataform
DATAFORM GmbH
Im Gefierth 8
63303 Dreieich
Tel. +49 (0) 6103 9308-510
Fax +49 (0) 6103 9308-511
www.dataform.de
Note
Subject to technical changes in the interests of progress, minor differences in size and colour,
errors, innovations, printing errors and technical modifications.
The colours reproduced in illustrations may differ from the original colour due to technical
reasons associated with the printing process.
This sales manual, including all its pages and any supplements and additions
is and remains the property of the company BAX Küchenmanufaktur GmbH & Co. KG and is
exclusively presented to retail customers for the purpose of selling BAX kitchens. No
part of this manual may be copied or duplicated in any way whatsoever, nor may individual
pages or parts of pages of this manual be photographed or traced.
On termination of the business relationship with BAX Küchenmanufaktur GmbH & Co. KG,
this sales manual must be returned to BAX Küchenmanufaktur GmbH & Co. KG.
BAX Küchenmanufaktur GmbH & Co. KG
Westerfeldstraße 5
32758 Detmold
Tel.: +49 (0) 5231 - 60 07-0
Fax: +49 (0) 5231 - 60 07-20
E-Mail: info@bax-kuechen.de
www.bax-kuechen.de
02
3. Contents
Section Designation Page
Summary of ranges 0 / 01
K - Melamine, HPL and HPLD fronts K / 01 - K / 27
F - Veneer fronts F / 01 - F / 10
L - Lacquered fronts L / 01 - L / 16
G - Design fronts G / 01 - G / 05
M - Multi-layer real wood fronts M / 01 - M / 08
R - Wood framed fronts R / 01 - R / 22
1 Product description 1 / 01 - 1 / 19
Furniture board carcase 1 / 10 - 1 / 11
Glass fronts / Framed glass doors / Glass types 1 / 12 - 1 / 13
Handles / Knobs / Touch-Latch / Touch-Latch Senso 1 / 14 - 1 / 19
2 Base units System B Carcase height 75 cm 2 / 01 - 2 / 19
3 Wall units System B Carcase heights 49.5 / 62 / 74.5 / 87 / 99.5 cm 3 / 01 - 3 / 23
4 Tall units System B Carcase heights 137.2 / 162.5 / 203 / 215.5 / 228 cm 4 / 01 - 4 / 38
5 Base units System C Carcase height 81 cm 5 / 01 - 5 / 19
6 Wall units System C Carcase heights 40 / 68 / 80.5 / 93 cm 6 / 01 - 6 / 20
7 Tall units System C Carcase heights 137.2 / 162.5 / 203 / 215.5 / 228 cm 7 / 01 - 7 / 37
8 Tall units with glass doors System B and C Carcase heights 137.2 / 162.5 cm 8 / 01 - 8 / 04
9 Worktops 9 / 01 - 9 / 10
10 Roller shutter units and top units System B and C 10 / 01 - 10 / 05
11 Chimneys, wall elements, BAX cooking areas 11 / 01 - 11 / 13
12 Size changes, special unit systems, supplementary units, 12 / 01 - 12 / 12
stainless steel legs, CD system
13 Upright panels, pilasters, shelves, open shelf niche units, wall panels, wall shelves, 13 / 01 - 13 / 11
rear coverings, shelf grill
14 Light pelmets, cornices, ceiling panels 14 / 01 - 14 / 05
15 Accessories 15 / 01 - 15 / 37
16 Tables, seating furniture 16 / 01 - 16 / 07
17 QUADRE The kitchen without handles 17 / 01 - 17 / 77
18 COTTAGE The kitchen with front-mounted frames and inset front 18 / 01 - 18 / 69
18 CAMARGUE The kitchen with front-mounted frames and overlying front 18 / 01 - 18 / 69
03
4. Index
Designation Page
A Accessories:
for base units System B and C 2-16 to 2-19, 5-16 to 5-19
for wall units System B and C 3-21 to 3-23, 6-18 to 6-20
for tall units System B and C 4-31 to 4-38, 7-31 to 7-37
for shelves System B and C 13-08
B Back panel cladding 13-09
Base structure for raised dishwasher 4-37, 6-36
Base units System B and C 2-03, 2-13, 5-03, 5-13
Basket inserts 15-26
Blind panels 2-17, 5-17
Bottom ventilation 2-19, 5-19, 15-27
Built-in halogen lights and accessories 15-19
Built-in LED lights and accessories 15-20
Built-under lights 15-18
C Carcase variants 1-10, 1-11
Carcases for drawers 2-08, 5-08
Care set for surfaces 15-31
Castors 15-28, 16-05
CD system 12-05
Ceiling infill panels 14-05
Chimneys 11-03 to 11-08
Chopping board 9-10, 15-26
Continuous front for dresser units 4-38, 7-37
Cooker base units System B and C 2-11, 5-11
Corner base units System B and C 2-10, 5-10
Corner sink units System B and C 2-13, 5-13
Corner tall unit with sliding door 12-06
Cornices 14-04
COTTAGE / CAMARGUE - The kitchen with front-mounted carcase frames 18-01 to 18-69
Product description 18-03
Summary of ranges 18-09 to 18-14
Base units 18-17 to 18-23
Wall units 18-25 to 18-41
Tall units 18-45 to 18-56
Cutlery trays:
Solid wood 15-04, 15-12, 15-13
Solid wood with velvet base 15-05
Plastic 15-04
D Dishwasher base structure 4-37, 7-36
Dishwashers high installed 4-37, 7-36
Drawers / Pull-outs 15-32, 15-33
E End-of-row open shelf units:
Base units System B and C 2-15, 5-15
Wall units System B and C 3-05, 3-09, 3-14, 3-17, 3-20, 6-09, 6-12, 6-16
Tall unit system B and C 4-06, 4-10, 4-17, 4-24, 4-31, 7-06, 7-10, 7-16, 7-23
End-of-row units:
Base units System B and C 2-09, 5-09
Wall units System B and C 3-03, 3-06, 3-10, 3-15, 3-18, 6-05, 6-10, 6-14
Tall unit system B and C 4-05, 4-10, 4-17, 4-24, 4-31, 7-06, 7-10, 7-16, 7-22
Extractor hood accessories 11-13, 15-29
Extractor hood open shelf units System B and C 3-05, 3-09, 3-14, 3-17, 3-20, 6-09, 6-12, 6-16
Extractor hood units System B and C 3-03, 3-06, 3-10, 3-15, 3-18, 6-05, 6-10, 6-14
04
5. Index
Designation Page
F Facet cut 15-30
Filler panel for height adjustment 4-38, 7-37
Filler strips:
Base units System B and C 2-16, 2-17, 5-16, 5-17
Wall units System B and C 3-21, 3-22, 6-18, 6-19
Tall units System B and C 4-34, 4-35, 7-33, 7-34
Fittings 15-17
Flat drawers 15-03
Folding door elements
Folding step ladder 15-27
Frame with door: 12-09
Base unit System B and C 2-18, 5-18
Wall unit system B and C 3-23, 6-20
Tall unit system B and C 4-36, 7-35
Framed glass doors 1-13
Fronts for built-under appliances System B and C 2-14, 5-14
Functional partitioning for drawers 15-06 to 15-10
Functional partitioning for solid wood drawers and pull-outs 15-12
Furniture board carcase 1-09
G Gantry standing table 16-06
Glass types 13-10, 15-26
Glass containers 1-12
Glass shelfs 15-24
Glazing bars for glass doors 15-30
H Handles / knobs 1-14 to 1-21
High capacity pull-out 15-03
Hindges 15-31
Hob with extractor hood 11-10, 11-11
Hob with extractor hood, oxidized iron 11-12
Holes for lighting 15-21
I Illuminated shelf for wall mounting 15-22
Illuminated shelves 15-18
Increased side depth 2-16, 3-21, 4-32, 5-16, 6-18, 7-31
Installation system for scales 15-26
Interior drawers, interior pull-outs 15-03
Interior lighting for drawers 15-18
Inset rail handle 17-07
K Kitchen shelf 13-10
Knobs / handles 1-14 to 1-21
L Lattice shelves for open shelf units 13-08
Le Mans 15-25
Legs in stainless steel 12-04
Lift mechanism with bread bin 15-26
Light pelmets 14-03
Locks 15-37
M Magic Corner 15-25
Middle panels 15-24
Mixer tap, sysytem Dornbracht 15-17
Motor drives 15-21
Mounting bracket 13-08
Multi-purpose slicer 15-26
Multi-purpose units 2-09, 5-09
N Niche panels 13-09
Niche wall panels 13-11
Non-slip mats 15-05
05
6. Index
Designation Page
O Open shelf niche units 13-10
Open shelf tall units System B and C 4-06, 4-10, 4-17, 4-24, 4-31, 7-06, 7-10, 7-16, 7-23
Open shelf units:
Base units System B and C 2-15, 5-15
Wall units System C 6-04, 6-09, 6-12, 6-16
Tall units System B 4-06, 4-10, 4-17, 4-24, 4-31
Tall units System C 7-06, 7-10, 7-16, 7-23, 7-30
P Pilasters for base, wall and tall units 13-04
Planning principle for 12-11, 12-12
supplementary equipment 1 and 2 (pilasters, upright panels)
Plate holder shelf 15-10, 15-13
Plinth for appliance 2-14, 5-14
Plinth Aluminium 2-19, 5-19, 14-05, 15-27
Plinth corners 2-19, 5-19
Plinth drawer 15-03
Plinth lighting 15-20
Plinth panel 2-18, 2-19, 5-18, 5-19
Pocket door element 12-10
Pot grill 15-24
Product description 1-07 to 1-08
Pull-out for cleaning utensils 15-26
Pull-out towel rail 2-09, 5-09
Pull-outs / drawers 15-32, 15-33
Q QUADRE The Kitchen Without Handles 17-01 to 17-77
Product description 17-04, 17-05
Summary of ranges 17-03
Base units 17-11 to 17-29
Wall units 17-33 to 17-46
Tall units 17-49 to 17-77
R Repair kit for surfaces 15-31
Roller shutter dresser units and roller shutter niche units 10-03
S Seating funiture 16-07
Sensomatic 1-21
Side coverings with double up fronts
Base units System B and C 2-16, 5-16
Wall units System B and C 3-21, 6-18
Tall unit system B and C 4-32, 7-31
Side covering panel with plinth 2-18, 4-33, 5-18, 7-32
Shelf brackets 13-08
Shelves for base units, tall units, wall units 15-23
Shelves:
Accessories 13-08
Finishing 13-06, 13-07
Shelves 13-05
Solid wood 13-06
Single fronts 15-31
Sink units System B and C 2-11 to 2-13, 5-11 to 5-13
Size changes for base, wall and tall units 12-03
Slicer Multi-purpose 15-26
Sliding door for corner tall unit 12-06
Solid wood drawers and pull-outs 15-11, 15-34 to 15-36
Size changes and variable front height arrangements 12-03
Spice racks 15-25
Stainless steel cover for bottom shelf 15-16
Stainless steel frames 15-03
Stainless steel sleeves 15-28, 16-05
Step ladder 15-27
Summary of carcase dimensions 1-02 to 1-06
Supplementary equipment 1 + 2 12-11, 12-12
Support legs 9-10, 15-28
Surface care set 15-31
06
7. Index
Designation Page
T Tables:
BAX work table 16-05
BAX gantry / standing tables 16-06
BAX tables 16-03, 16-04
Tall unit dressers, carcase 40 cm high 4-38, 7-37
Tall units System B:
Carcase height 137.2 cm 4-03 to 4-06
Carcase height 162.2 cm 4-07 to 4-10
Carcase height 203 cm 4-11 to 4-17
Carcase height 215.5 cm 4-18 to 4-24
Carcase height 228 cm 4-25 to 4-31
Tall units System C:
Carcase height 137.2 cm 7-03 to 7-06
Carcase height 162.2 cm 7-07 to 7-10
Carcase height 203 cm 7-11 to 7-16
Carcase height 215.5 cm 7-17 to 7-23
Carcase height 228 cm 7-24 to 7-30
Tandem waste collection system 15-24
Top open shelf design units 10-05
Top units for appliance housings 4-37, 7-36
Top units up to 145 cm high, wall unit depth 10-04, 10-05
Top units:
for appliances 4-37, 7-36
for tall units, carcase 40 cm high 4-38, 7-37
with folding doors 10-05
Touch-Latch 1-21
Towel rail 15-26
Transom bars 15-30
U Upright panels for base, wall and tall units 13-03
V Vapors sheet real stainless steel 4-37, 7-36, 15-27
Vario sliding door system 12-07
Ventilation grille 14-05, 15-27
Visible sides:
Base unit System B and C 2-16, 5-16
Wall unit system B and C 3-21, 6-18
Tall unit system B and C 4-32, 7-31
W Wall elements 11-09, 18-65
Wall panels 13-11
Wall shelves 13-10
Wall units System B:
Carcase height 49.5 cm 3-03 to 3-05
Carcase height 62 cm 3-06 to 3-09
Carcase height 74.5 cm 3-10 to 3-14
Carcase height 87 cm 3-15 to 3-17
Carcase height 99.5 cm 3-18 to 3-20
Wall units System C:
Carcase height 40 cm 6-03 to 6-04
Carcase height 68 cm 6-05 to 6-09
Carcase height 80.5 cm 6-10 to 6-13
Carcase height 93 cm 6-14 to 6-17
Waste collectors 15-14, 15-15
Wickerwork baskets 15-22, 16-05
Wire mesh shelves 15-24
Wooden drawers 13-08
Wooden glazing bars 15-30
Worktops:
Accessories 9-09
Finishing 9-08, 9-09
Variants 9-03, 9-04, 9-05
07
8. K
K-01
Melamine, HPL and HPLD fronts
Page
CONSOFT Color K - 02
CONSOFT Repro K - 03
MULTICOLOR K - 04 and K - 05
MULTICOLOR Luce K - 04 and K - 05
MADERA K - 06
MADERA Luce K - 06
METALL K - 07
UNITEC Solid HPLD K - 08
SERRA Repro K - 09
9. CONSOFT Color
Direct lamination, surface matt
InfoBox
Value group Accessories KP / KH
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++ 4 Polyvinyl acetate ++
Ordering instructions
Special decors for front and carcase on request
Charged according to next higher PG
K-02
Range Price group
CONSOFT Color PP A
PP2 edge, 2 mm
colour-matched with the surface
CONSOFT Color RU A
PP2 edge, 2 mm
freely selectable from all ranges
CONSOFT Color ED A
PP2 edge, 2 mm
stainless steel effect
CONSOFT Color MP A
PP2 edge, 2 mm
beech multiplex effect
CONSOFT Color Tio A
PP2 edge, 2 mm, 3D effect, 2-colour:
026 HG white,
1027 HG alpine white,
1200 HG black,
1358 HG magnolia
CONSOFT Color Tec A
HPL3 laminate edge, 0.8 mm
colour-matched with the surface
CONSOFT Color Tec 9510 A
9610 A
HPL3 laminate edge, 0.8 mm
9510 aluminium decor
9610 stainless steel decor
CONSOFT Color CA 2
Solid anodized aluminium edge, 1 mm
aluminium effect
CONSOFT Color CN 2
Solid anodized aluminium edge, 1 mm
stainless steel effect
Service features
The melamine resin coating stands for high resistance, easy care, enduring
lightfastness, permanent easy cleaning and resistance to household chemicals. The
materials used are compatible with foods and can be incinerated without harming the
environment. These are decisive advantages as compared to thermoplastic PVC4
films.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
CONSOFT Color PP 1131 light grey handle 12/224 E
Directly laminated high-quality chipboard with plain
decors. Front and rear directly laminated with the same
high-quality melamine resin.Thickness of front 19 mm,
edge glued with PU1 glue.
Choice of colours
1026 1027
white alpine white
1303
ivory white
1365
vanilla
1573
pastel yellow
1358
magnolia
1331
beige grey
1316
panna
1193
quartz brown
1211
basalt brown
1115
silver grey
1184
sand grey
1131
light grey
1290
anthracite
1257
graphite
1200
black
10. CONSOFT Repro
Direct lamination, surface matt
InfoBox
Value group Accessories KP / KH
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey,1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++ 4 Polyvinyl acetate ++
Ordering instructions
State whether horizontal or vertical grain
BMA = Designation for continuous horizontal grain
extending over several fronts
Max. length: 2.65 m
Charged according to next higher PG
Special decors for front and carcase on request
K-03
Range Price group
CONSOFT Repro PP A
PP2 edge, 2 mm
CONSOFT Repro RU A
PP2 edge, 2 mm
freely selectable
from all laminate ranges
CONSOFT Repro ED A
PP2 edge, 2 mm
stainless steel effect
CONSOFT Repro MP A
PP2 edge, 2 mm
beech multiplex effect
CONSOFT Repro Tec A
HPL3 laminate edge, 0.8 mm
CONSOFT Repro Tec 9510 A
9610 A
HPL3 laminate edge, 0.8 mm
9510 aluminium decor
9610 stainless steel decor
CONSOFT Repro CA 2
Solid anodized aluminium edge, 1 mm
aluminium effect
CONSOFT Repro CN 2
Solid anodized aluminium edge, 1 mm
stainless steel effect
Service features
The melamine resin coating stands for high resistance, easy care, enduring
lightfastness, permanent easy cleaning and resistance to household chemicals. The
materials used are compatible with foods and can be incinerated without harming the
environment. These are decisive advantages as compared to thermoplastic PVC4
films.
The edges achieve maximum values in respect of lightfastness, resistance to
chemicals and easy cleaning.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
CONSOFT Repro PP 5605 Damson handle GM 15/224 E
Directly laminated high-quality chipboard with
reproduction wood decor.
Front and rear directly laminated with the same high-
quality melamine resin.
Thickness of front 19 mm, edge glued with PU1 glue.
Horizontal and vertical grain pattern
please see Info Box
Choice of decors
6159
Oak light
5165
Beech
natural
5474
Maple
5243
Sycamore
maple
4894
Walnut light
0544
Walnut dark
5609
Teak
5673
Makassar
Ebony
5674
Cherrywood
5681
Cherrywood
Havanna
5605
Damson
5690
Wengé
11. MULTICOLOR and MULTICOLOR Luce Front colours
HPL laminate matt and HPL laminate high gloss HG
InfoBox
Value group Accessories KP / KH / KE
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++
Ordering instructions
Special decors for front and carcase on request
Charged according to next higher PG
K-04
Choice of colours
1026
1026 HG
white
1027
1027 HG
alpine white
1131
1131 HG
light grey
1303
1303 HG
ivory white
1573
1573 HG
pastel yellow
1574
1574 HG
maize yellow
1365
1365 HG
vanilla
1331
1331 HG
beige grey
1358
1358 HG
magnolia
1316
1316 HG
panna
1349
1349 HG
caramel
1193
1193 HG
quartz brown
1980
1980 HG
lava brown
1211
1211 HG
basalt brown
1184
1184 HG
sand grey
1115
1115 HG
silver grey
1290
1290 HG
anthracite
1257
1257 HG
graphite
1200
1200 HG
black
1740
1740 HG
ice blue
0027
0027 HG
Indian red
1401
1401 HG
burgundy
MULTICOLOR PP 1027 alpine white handle GM15/224 E
High-quality chipboard 18 mm lined on both sides
with plain HPL3 decors.
Thickness of front 19.6 mm matt, 20.4 mm high gloss,
edging glued with PU1 glue.
Service features
HPL3 laminate stands for extremely high resistance, be
it the resistance to abrasion, enduring lightfastness,
permanent easy cleaning and resistance to household
chemicals.
The edges achieve maximum values in respect of
lightfastness, resistance to chemicals and easy
cleaning.
The edge is glued with PU1 glue for a waterproof and
heat-resistant bond. The materials used are compatible
with foods and eco-friendly.
12. MULTICOLOR and MULTICOLOR Luce Edges
HPL laminate matt and HPL laminate high gloss HG
K-05
Range Price group Range Price group
MULTICOLOR PP 1
HPL matt on both sides
MULTICOLOR Luce PP 1
HPL HG on both sides
PP2 edging matt, 2 mm
MULTICOLOR KE 3
HPL matt on both sides
MULTICOLOR Luce KE 3
HPL HG on both sides
Solid wood edging oiled, 1 mm
Selection:
TETRA and ALPHA veneers,
Section F
MULTICOLOR Luce GC 2
HPL HG on both sides
Choice of colours:
1026 HG white 1027 HG alpine white
1358 HG magnolia 1303 HG ivory white
1331 HG beige grey 1193 HG quartz brown
1980 HG lava brown 1257 HG graphite
1200 HG black
PP2 edging high gloss, 1.3 mm
MULTICOLOR Tec 1
HPL matt on both sides
MULTICOLOR Luce Tec 1
HPL HG on both sides
HPL edging matt, 0.8 mm
HPL edging high gloss, 1.2 mm
MULTICOLOR ED 1
HPL matt on both sides
MULTICOLOR Luce ED 1
HPL HG on both sides
PP2 edging, 2 mm
stainless steel effect
MULTICOLOR Tec 9500 2
HPL matt on both sides
MULTICOLOR Luce Tec 9500 2
HPL HG on both sides
HPL edging, 0.8 mm
9500 aluminium decor, smooth
MULTICOLOR MP 1
HPL matt on both sides
MULTICOLOR Luce MP 1
HPL HG on both sides
PP2 edging, 2 mm
beech multiplex effect
MULTICOLOR Tec 9610 2
HPL matt on both sides
MULTICOLOR Luce Tec 9610 2
HPL HG on both sides
HPL edging, 0.8 mm
9610 stainless steel decor
MULTICOLOR Tio 2
HPL matt on both sides
MULTICOLOR Luce Tio 2
HPL HG on both sides
Choice of colours:
1026 HG white 1027 HG alpine white
1200 HG black 1358 HG magnolia
PP2 edging, 2 mm
3D effect, 2-colour
MULTICOLOR CA 3
HPL matt on both sides
MULTICOLOR Luce CA 3
HPL HG on both sides
Solid anodized aluminium edging, 1 mm
aluminium effect
MULTICOLOR RU 1
HPL matt on both sides
MULTICOLOR Luce RU 1
HPL HG on both sides
PP2 edging matt, 2 mm
freely selectable from
all laminate ranges
MULTICOLOR CN 3
HPL matt on both sides
MULTICOLOR Luce CN 3
HPL HG on both sides
Solid anodized aluminium edging, 1 mm
stainless steel effect
13. MADERA and MADERA Luce
HPL laminate matt and HPL laminate high gloss HG
InfoBox
Value group Accessories KP / KH
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++ 2 Polypropylene ++ 3 High-Pressure Laminate ++
Ordering instructions
State whether horizontal or vertical grain
BMA = Designation for continuous horizontal
grain extending over several fronts
Max. length: 2.65 m
Charged according to next higher PG
Special decors for front and carcase on request
K-06
Range Price group
MADERA 2
MADERA Luce PP 3
PP2 edging, matt, 2 mm
colour-matched with the surface
MADERA RU 2
MADERA Luce RU 3
PP2 edging, 2 mm
freely selectable
MADERA ED 2
MADERA Luce ED 3
PP2 edging, 2 mm
stainless steel effect
MADERA MP 2
MADERA Luce MP 3
PP2 edging, 2 mm
beech multiplex effect
MADERA TEC 2
MADERA Luce Tec 3
HPL3 high-gloss laminate edging, 1.2 mm
colour-matched with the surface
MADERA Tec 9510 2
9610 2
MADERA Luce Tec 9510 3
9610 3
HPL3 laminate edging, 0.8 mm
9510 aluminium decor
9610 stainless steel décor
MADERA CA 4
MADERA Luce CA 5
Solid anodized aluminium edging, 1 mm
aluminium effect
MADERA CN 4
MADERA Luce CN 5
Solid anodized aluminium edging, 1 mm
stainless steel effect
Service features
HPL3 laminate stands for extremely high resistance, be it the resistance to
abrasion, enduring lightfastness, permanent easy cleaning and resistance to
household chemicals.
The edges achieve maximum values in respect of lightfastness, chemical
resistance and easy cleaning.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond. The
materials used are compatible with foods and eco-friendly.
MADERA Luce Tec 5674 Cherrywood Havana
handle GMCG 128
Lined on both sides with 1.2 mm HPL3 laminate material.
Thickness of front 20.4 mm, edging glued with PU1 glue.
Horizontal and vertical grain pattern
please see Info Box
Choice of decors MADERA Luce
5165 HG
Beech natur
5474 HG
Maple
5243 HG
Sycamore
Maple
5605 HG
Damson
5674 HG
Cherrywood
5681 HG
Cherrywood
Havanna
5615 HG
Indian apple
5673 HG
Makassar
Ebony
5690 HG
Wengé
Choice of decors MADERA
4262
Oak matured
4447
Walnut
roman
4263
Lancelot
Oak nature
4264
Lancelot
Oak grey
5615
Indian apple
14. METALL
HPL laminate
InfoBox
Value group Accessories KP / KH / KE
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++ 2 High-Pressure Laminate ++
Ordering instructions
K-07
Range Price group
METALL Tec 9500 4
HPL 9500 smooth aluminium decor on both sides
HPL edge, 0.8 mm
9500 aluminium decor, smooth
METALL KE 9500 4
HPL 9500 smooth aluminium decor on both sides
Solid wood edge oiled, 1 mm
Selection:
TETRA and ALPHA veneers,
Section F
METALL Tec 9610 4
HPL 9610 stainless steel decor on both sides
HPL edge, 0.8 mm
9610 stainless steel decor
METALL KE 9610 4
HPL 9610 stainless steel decor on both sides
Solid wood edge oiled, 1 mm
Selection:
TETRA and ALPHA veneers,
Section F
METALL CA 5
HPL 9500 smooth alu decor on both sides
Solid anodized aluminium edge, 1 mm
aluminium effect
METALL CN 5
HPL 9610 stainless steel decor on both sides
Solid anodized aluminium edge, 1 mm
stainless steel effect
METALL Tec 7478 3
HPL 7478 sheet metal with reproduction
surface oxidation on both sides
HPL edge, 0.8 mm
7478 sheet metal with reproduction surface oxidation
METALL KE 7478 3
HPL 7478 sheet metal with reproduction
surface oxidation on both sides
Solid wood edge oiled, 1 mm
Selection:
TETRA and ALPHA veneers,
Section F
METAL Tec 9500 smooth aluminium decor, handle LS
Lined on both sides with 0.8 mm HPL2 laminate
material. Thickness of front 19.6 mm, edge glued with
PU1 glue.
Choice of colours
9500
aluminium decor,
smooth
9610
stainless steel
decor
7478
sheet metal with
repro-duction
surface
oxidation
Service features
HPL2 laminate stands for extremely high resistance,
be it the resistance to abrasion, enduring lightfastness,
permanent easy cleaning and resistance to household
chemicals.
The edge is glued with PU1 glue for a waterproof and
heat-resistant bond. The materials used are compatible
with foods and eco-friendly.
15. UNITEC Solid
HPLD laminate, dyed through
InfoBox
Value group Accessories KD
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 High-Pressure Laminate dyed through ++ 2 Polyurethane ++
Ordering instructions
Special decors for front and carcase on request
Charged according to next higher PG
K-08
Range Price group Value group
UNITEC Solid 5
HPLD edges, 1.2 mm
colour-matched with the surface
KD
Service features
HPLD1 laminate stands for extremely high resistance, be it resistance to abrasion,
enduring lightfastness, permanent easy cleaning and resistance to household
chemicals. The edge is glued with PU2 glue for a waterproof and heat-resistant bond.
UNITEC Solid 1026 D white handle GM15/224E
Lined on both sides with 1.2 mm HPLD1 dyed through
laminate material.
Thickness of front 20.4 mm, edges glued with PU2 glue.
Choice of colours
1026 D
white Solid
1027 D
alpine white Solid
1115 D
silver grey
Solid
1290 D
anthracite Solid
1184 D
sand grey Solid
1193 D
quartz brown
Solid
1211 D
basalt brown Solid
1200 D
black Solid
16. SERRA Repro
Direct lamination
InfoBox
Value group Accessories KP
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++ 2 Polypropylene ++
Ordering instructions
Special decors for front and carcase on request
Charged according to next higher PG
K-09
Range Price group
SERRA Repro PP A
PP2 edge, 1 mm
SERRA Repro CA 2
Solid anodized aluminium edge, 1 mm
aluminium effect
SERRA Repro CN 2
Solid anodized aluminium edge, 1 mm
stainless steel effect
Service features
The melamine resin coating stands for high resistance, easy care, enduring
lightfastness, permanent easy cleaning and resistance to household chemicals.
The materials used are compatible with foods and can be incinerated without
harming the environment.
The edges achieve maximum values in respect of lightfastness, chemical
resistance and easy cleaning.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
SERRA Repro PP 0008 marsh oak handle GMCG 128
Directly laminated high-quality chipboard with
reproduction wood decor.
Front and rear directly laminated with the same high-
quality melamine resin.
Thickness of front 19 mm, edge glued with PU1 glue.
Choice of decors
0008 marsh oak
0009 reed
0012 crystal oak
18. ALPHA
Veneer
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
State whether horizontal or vertical grain
BMA = Designation for continuous horizontal
grain extending over several fronts
Max. length: 2.5 m
Charged according to next higher PG
Special veneers for front and carcase on
request
High-gloss lacquer finish on request
F-02
Range Price group Wood group
ALPHA 4
Edges 1 mm veneer
E
ALPHA CA 5
Solid anodized aluminium edge,
1 mm
aluminium effect
E
ALPHA CN 5
Solid anodized aluminium edge,
1 mm
stainless steel effect
E
ALPHA 9700 Teak handle GMCG 12/224
Total thickness of the front 19 mm, high-quality
chipboard 18 mm with veneer. Veneer with horizontal
or vertical grain pattern as specified. Veneer produced
to order to ensure a uniform appearance. The surface
is sealed with high-quality PUR1 matt silk lacquer. Edge
glued with PU1 glue.
Continuous horizontal
grain pattern, BMA; see Info Box
Choice of veneers
9700
Teak
4000
Oak
1670
Makassar
0371
Black pine
6601
Wengé
1853
grigio
0149
lava brown pine
0560
sand pine
Service features
Wood is a natural material.
The fronts are produced to order. The matt silk PUR1 surface must be wiped
with a soft, damp cloth.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
19. ALPHAKORD
Veneer on HPL laminate
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 High-Pressure Laminate ++ 2 Polyurethane ++
Ordering instructions
State whether horizontal or vertical grain
BMA = Designation for continuous horizontal
grain extending over several fronts
Max. length: 2.5 m
Charged according to next higher PG
Special veneers for front and carcase on
request
F-03
Range Price group Wood group
ALPHAKORD 4
Edges 1.2 mm veneer on HPL
E
ALPHAKORD CA 5
Solid anodized aluminium edge,
1 mm
aluminium effect
E
ALPHAKORD CN 5
Solid anodized aluminium edge,
1 mm
stainless steel effect
E
Service features
Wood is a natural material.
It owes its particular charm to natural changes in colour inside the veneer design.
However, each front is unique due to being produced to order.
The wood changes its colour in the course of time, due to exposure to natural light.
The edge is glued with PU2 glue for a waterproof and heat-resistant bond.
The surface must be wiped with a soft, damp cloth.
ALPHAKORD 5069 light grey oak, handle GMCG 12/224
High-quality chipboard 18 mm veneered with 1.2 mm
thick HPL1 laminate lined with genuine wood.
Total thickness of the front 20.4 mm, edge glued with
PU2 glue. Veneer produced to order to ensure a uniform
appearance. The surface is sealed with a high-quality
melamine wax overlay.
Choice of veneers
5069
light grey oak
5065
grey oak
5066
anthracite oak
5067
dark oak
5057
Makassar
20. TETRA wood group E
Veneer
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
State whether horizontal or vertical grain
BMA = Designation for continuous horizontal
grain extending over several fronts
Max. length: 2.5 m
Pricing for BMA: next higher PG
B_G_S_ = Designation for veneer with flower (B),
planked veneer (G) or strip veneer (S)
High-gloss lacquer finish on request
Special veneers for front and carcase on request
F-04
Range Price group Wood group
TETRA 4 - 5
Edges 1 mm veneer
E
TETRA CA 4 - 5 + 10%
Solid anodized aluminium edge,
1 mm
aluminium effect
E
TETRA natural oak G_ handle GM 15/224 E
TETRA CN 4 - 5 + 10%
Solid anodized aluminium edge,
1 mm
stainless steel effect
E Total thickness of the front 19 mm, high-quality
chipboard 18 mm with veneer. Veneer produced to order
to ensure a uniform appearance.
Edges glued with PU1 glue. The surface is sealed with
high-quality PUR1 matt silk lacquer or coloured hard oil.
Choice of veneer
BMA: Continuous horizontal grain pattern, see Info Box
B_G_S_: Veneer with flower (B), planked veneer (G), strip veneer (S), see Info Box
Maple
PG 4
Indicate
B_G_S_
Beech
PG 4
Indicate
B_G_S_
Oak natural
PG 4
Indicate
B_G_S_
Ash
PG 4
Indicate
B_G_S_
Spruce
PG 4
Indicate
B_G_S_
Elm
PG 4
Indicate
G_S_
Larch
PG 5
Indicate
B_G_S_
Brushed dark
brown oak
PG 5
G_
Oak graphite
PG 5
Indicate
B_G_S_
Coal oak
oiled
PG 5
G_
Stone oak
oiled
PG 5
G_
Havana oak
oiled
PG 5
G_
Coral Chalk
oak
PG 5
G_
Ocean grey
oak oiled
PG 5
G_
Castle brown
oak oiled
PG 5
G_
Cotton white
oak oiled
PG 5
G_
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to natural fluctuations in colour.
Wood changes its colour in the course of time, due to its exposure to natural light.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
The surface must be wiped with a soft, damp cloth.
21. TETRA wood group E 1
Veneer
InfoBox
Value group Accessories Wood group E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
State whether horizontal or vertical grain
BMA = Designation for continuous horizontal
grain extending over several fronts
Max. length: 2.5 m
Pricing for BMA: next higher PG or +20%
B_G_S_ = Designation for veneer with flower (B),
planked veneer (G) or strip veneer (S)
High-gloss lacquer finish on request
Special veneers for front and carcase on request
F-05
Range Price group Wood group
TETRA 5 - 7
Edges 1 mm veneer
E 1
TETRA CA 5 - 7 + 10%
Solid anodized aluminium edge,
1 mm
aluminium effect
E 1
TETRA Wengé G_ handle GMCG 12/224
TETRA CN 5 - 7 + 10%
Solid anodized aluminium edge,
1 mm
stainless steel effect
E 1 Total thickness of the front 19 mm, high-quality
chipboard 18 mm with veneer.
Veneer produced to order to ensure a uniform
appearance.
The edge is glued with PU1 glue. The surface is sealed
with high-quality PUR1 matt silk lacquer.
Choice of veneer
BMA: Continuous horizontal grain pattern, see Info Box
B_G_S Veneer with flower (B), planked veneer (G), strip veneer (S), see Info Box
Cherrywood
PG 5
Indicate
B_G_S_
Oregon Pine
PG 5
G_
Nutwood
PG 5
Indicate
B_G_S_
Robinia
PG 5
Indicate
B_G_
Mahogany
PG 5
Indicate
B_G_S_
Wild oak
PG 6
-------
Sen
PG 7
B_
Swiss
pearwood
PG 7
B_
Teak
PG 7
G_
Damson
PG 7
G_
Indian apple
PG 7
G_
Wengé
PG 7
Indicate
B_G_
Macassar
PG 7
Indicate
B_G_S_
Rosewood
PG 7
B_
White ebony
PG 7+50%
B_
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to natural fluctuations in colour.
Wood changes its colour in the course of time, due to its exposure to natural light.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
The surface must be wiped with a soft, damp cloth.
22. TETRA P
Veneer
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colours on request
Charged according to next higher PG
F-06
Range Price group Wood group
TETRA P 73 5 - 6
Edges 1 mm veneer
TETRA P 100 5 - 6
Edges 1 mm veneer
TETRA P 120 5 - 6
Edges 1 mm veneer
TETRA P 150 5 - 6
Edges 1 mm veneer
E
E
E
E
TETRA P 73 magma red lava grey, knob K 35 ZO
MDF board 18 mm thick, veneered. Total thickness of
the front 19 mm.
Veneer produced to order in panel effect to ensure a
uniform appearance.
Profile: spacing between grooves 7.3 cm, 10 cm, 12 cm
and 15 cm. The edge is glued with PU1 glue. The surface
is sealed with high-quality PUR1 coloured matt silk
lacquer.
Choice of colours
reed green
PG 5
sand yellow
PG 5
cappuccino
PG 5
fjord blue
PG 5
cream white
PG 5
pure white
RAL 9010
PG 5
quartz brown
PG 5
sand grey
PG 5
basalt brown
PG 5
beige grey
PG 5
light grey
PG 5
magma red
lava grey
PG 6
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to natural fluctuations
in colour.
Wood changes its colour in the course of time, due to its exposure to natural light.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
The surface must be wiped with a soft, damp cloth.
23. ARLON P
Veneer knotty oak
InfoBox
Value group Accessories Wood group E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
State whether horizontal or vertical grain
Special colours on request
Charged according to next higher PG
F-07
Range Price group Wood group
ARLON P 5
Edges 1 mm veneer
E 1
ARLON P Coal knob KC 50 E
High-quality chipboard 18 mm with coarse knotty oak
veneer. Total thickness of the front 19 mm. Veneer
produced to order in panel effect to ensure a uniform
appearance. Profile: spacing between grooves 12 cm.
The edges are glued with PU1 glue. The surface is
sealed with high-quality PUR1 matt silk lacquer or
coloured hard oil.
Choice of colours
Natural
oiled
Coal
oiled
Stone
oiled
Havana
oiled
Coral chalk Ocean grey
oiled
Castle brown
oiled
Cotton white
oiled
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to natural fluctuations
in colour due above all to its knotty nature.
The wood changes its colour in the course of time, due to exposure to natural light.
The edge is glued with PU1 glue for a waterproof and heat-resistant bond.
The surface must be wiped with a soft, damp cloth.
24. L
L - 01
Lacquered fronts
Page
VILLA L - 02
CASTELL L - 03
CORNWALL L - 04
STUDIO L - 05
VILLAGE L - 06
CULIBRA L - 07
25. VILLA
Lacquer
InfoBox
Value group Accessories Lacquer group L
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
L-02
Range Price group Lacquer group
VILLA L 3
PUR1 matt silk lacquer
L
VILLA SL 3
Structure finish,
PUR1 matt silk lacquer
with texturing pigments
L
VILLA L light grey 1131 knob K 35 R
Solid wood framed front with MDF centre panel, 2 mm
radius outside. Width of frame 55 mm, drawer front
without frame and centre panel. The surface is sealed
with high-quality PUR1 matt silk lacquer.
Choice of colours
pure white
RAL 9010
ivory white vanilla
magnolia light grey beige grey
quartz brown
Service features
The front is designed in accordance with the specific properties of the
materials used in order to guarantee a long service life. The lacquered
surface is easy to care for and resistant to household chemicals.
The surface must be wiped with a soft, damp cloth.
26. CASTELL CASTELL slured
Lacquer Lacquer
InfoBox
Value group Accessories Lacquer group L
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
L-03
Range Price group Lacquer group
CASTELL 4 L
CASTELL slured 5
Like CASTELL,
but structure finish:
PUR1 matt silk lacquer
with texturing pigments
L
Choice of colours for CASTELL and CASTELL slured
Service features
The front is designed in accordance with the specific properties
of the materials used in order to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
pure white
RAL 9010
ivory white vanilla magnolia light grey beige grey quartz brown
CASTELL ivory white 1303 knob K 35 ZR
Solid wood framed front with MDF centre panel. Width of
frame 55 mm, chamfered on the outside. Drawer front
without frame and centre panel. The surface is sealed
with high-quality PUR1 matt silk lacquer.
27. CORNWALL
Lacquer
InfoBox
Value group Accessories Lacquer group L
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colours on request
Charged according to next higher PG
L-04
Range Price group Lacquer group
CORNWALL P 73 4
CORNWALL P 100 4
CORNWALL P 120 4
CORNWALL P 150 4
L
L
L
L
Service features
The lacquered surface is easy to care for and resistant
to household chemicals.
The surface must be wiped with a soft, damp cloth.
CORNWALL P 73 cream white-terra brown knob K 33 Z
MDF board 19 mm, lacquered. Profile: Distance
between grooves 7.3 cm, 10 cm, 12 cm and 15 cm.
The surface is sealed with a high-quality PUR1 coloured
matt silk lacquer.
Choice of colours
cream white-terra brown pure white-lava grey
magma red-lava grey basalt brown
28. STUDIO
Lacquer
InfoBox
Value group Accessories Lacquer group L / L 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
L-05
Range Price group Lacquer group
STUDIO L 3
Polyurethane matt silk lacquer
L
STUDIO SL 3
Polyurethane matt silk lacquer
with texturing pigments
L
STUDIO SG 4
Polyurethane high gloss silk lacquer
L 1
STUDIO HG 5
Polyurethane / acrylic lacquer, high gloss
L 1
STUDIO HG 1401 burgundy handle GM 12/160
MDF board 19 mm, lacquered.
Total thickness of the front 20 mm.
2 mm outside radius.
Choice of colours
pure white
RAL 9010
alpine white ivory white
light grey beige grey burgundy
quartz brown lava brown black
Service features
The lacquered surface is easy to care for and resistant
to household chemicals.
The surface must be wiped with a soft, damp cloth.
29. VILLAGE
Lacquer
InfoBox
Value group Accessories Lacquer group L / L 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG or + 5%
L-06
Range Price group Lacquer group
VILLAGE L 6
Polyurethane matt silk lacquer
L
VILLAGE SL 6
Polyurethane matt silk lacquer
with texturing pigments
L
VILLAGE SG 7 + 10%
Polyurethane high gloss silk lacquer
L 1
VILLAGE HG 7 + 25%
Polyurethane / acrylic lacquer, high gloss
L 1
VILLAGE SL light grey knob K 135 E
MDF board as framed front, milled. Chamfered outside.
Total thickness of the front 20 mm, width of frame
55 mm; drawer front without frame and centre panel.
Choice of colours
pure white
RAL 9010
alpine white ivory white
light grey beige grey magnolia
quartz brown lava brown black
Service features
The front is designed in accordance with the specific properties of the materials used in
order to guarantee a long service life. The lacquered surface is easy to care for and
resistant to household chemicals.
The surface must be wiped with a soft, damp cloth.
30. CULIBRA
Lacquer
InfoBox
Value group Accessories Lacquer group L
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
L-07
Range Price group Lacquer group
CULIBRA 6 L
Service features
The front is designed in accordance with the specific properties of the materials used
in order to guarantee a long service life. The lacquered surface is easy to care for and
resistant to household chemicals.
The surface must be wiped with a soft, damp cloth.
CULIBRA panna knob K 25 ZO
Total thickness of the front 28 mm,
width of frame 30 mm, profiled.
Centre panel 8 mm MDF board.
The surface is sealed with high-quality
PUR1 coloured matt silk lacquer.
Choice of colours
pure white
RAL 9010
alpine white ivory white
magnolia light grey beige grey
panna quartz brown lava brown
32. ART Steel ART Alu
Partical board covered with 1 mm real stainless steel Partical board coated with 1 mm solid alu
InfoBox
Value group Accessories on request
Handles Section 1
Visible sides not possible, but can be used as double up front
Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves on request
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
ART Steel
The 15% surcharge also applies for all
additional parts which are encased with
1 mm stainless steel.
G-02
Range Price group
ART Steel 7 + 15%
Care instructions
Do not use any aggressive or abrasive cleaning agents or polishes.
We recommend that you use a silicone-based special care agent.
ART Steel bar handle STG 15 E
Total thickness of the front 20 mm;
directly laminated 19 mm melamine resin board as
support panel.
Outer surface and edges encased with 1 mm real
stainless steel. Radius 2 mm, corners welded. Real
stainless steel brushed vertically.
Interior colour to match the standard carcase: Carcase
white, 1131 light grey or 1257 graphite.
Range Price group
ART Alu 7
1 mm solid anodized aluminium
on both sides
Solid anodized aluminium edge,
1 mm, same as the surface
ART Alu handle LS
Total thickness of the front 21 mm;
directly laminated 19 mm melamine resin board as
support panel.
Edges and both sides coated with 1 mm anodized,
unbrushed aluminium.
The surface and edges are glued with PU1 glue for a
waterproof and totally heat-resistant bond.
33. MORA
Lacquered design front
InfoBox
Value group Accessories Lacquer group L
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
G-03
Range Price group Lacquer group
MORA 5 L
Service features
The front is designed in accordance with the specific properties
of the materials used in order to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
MORA pure white RAL 9010
Total thickness of the front 20 mm,
width of frame 200 mm at the sides, 150 mm at top and
bottom; 2 mm outside radius. Centre panel 8 mm MDF
board. The surface is sealed with high-quality PUR1
coloured matt silk lacquer.
Choice of colours
pure white
RAL 9010
alpine white ivory white
magnolia light grey beige grey
panna quartz brown lava brown
34. VENTANA
Framed glass front
InfoBox
Value group Accessories freely selectable
Handles Section 1
Visible sides can be used as overlaid front panel
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
The handles GMU, VGMU, LS, GWL, GW 90 E
and GMR 32 cannot be used for structural
reasons.
G-04
Range Price group
VENTANA 7 + 25%
Service features
Must be cleaned with conventional glass cleaning agent.
VENTANA
Aluminium framed glass front.
Total thickness of the front 20 mm, width of frame 50 mm,
mitred corners. Glass pane printed with grey
passepartout in same width as frame on inside.
35. VENTURA
Glass front
InfoBox
Value group Accessories freely selectable
Handles Section 1
Visible sides can be used as overlaid front panel
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
RAL, Sikkens and NCS colours are possible
Charged according to next higher PG
The handles GMU, GW 90 E and GMR 32
cannot be used for structural reasons.
G-05
Range Price group
VENTURA 5
Service features
Clean with conventional glass cleaning agent.
VENTURA black
Partical board with 4 mm bonded, coloured toughened
safety glass pane.
Total thickness of the front 19.6 mm.
Choice of colours
traffic white
RAL 9016
similar to 1026
ivory white
magnolia black
36. VENTURA Frame
Framed glass front
InfoBox
Value group Accessories freely selectable
Handles Section 1
Visible sides can be used as overlaid front panel
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
RAL, Sikkens and NCS colours are possible
Charged according to next higher PG
The handles GMU, GW 90 E and GMR 32
cannot be used for structural reasons.
G-06
Range Price group
VENTURA Frame 5
Service features
Clean with conventional glass cleaning agent.
VENTURA FRAME black
Support panel as frame with 4 mm bonded, coloured
toughened safety glass pane. Glass pane lacquered with
passepartout in same width as frame on inside.
Total thickness of the front 19.6 mm.
Choice of colours for frame
traffic white
RAL 9016
similar to 1026
ivory white
magnolia black
37. M
M - 01
Multi-layer real wood fronts
Page
FRANKA M - 02
FRANKA P M - 03
FRANKA TH M - 04
FRANKA TH P M - 05
38. FRANKA
Solid wood 3 or 5 layers
InfoBox
Value group Accessories Wood group E / E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for FRANKA Oak and
Franka Wild oak on request
Charged according to next higher PG
or + 5%
M-02
Range Price group Wood group
FRANKA Maple 6 E
FRANKA Birch 6 E
FRANKA Beech 6 E
FRANKA Spruce 6 E
FRANKA Oak 6
FRANKA Wild oak 6
E
E 1
FRANKA Cherrywood 7 + 15% E 1
FRANKA Larch 7 E 1
FRANKA Nutwood 7 E 1
FRANKA Robinia 7 + 5% E 1
FRANKA Teak 7 + 15% E 1
FRANKA Nutwood handle 15/224 E
Total thickness 21 mm.
Glued 3 or 5 layers solid wood, edge with 2 mm radius.
The surface is finished with high quality PUR1 matt silk
lacquer, waxed or oiled.
Choice of colours, FRANKA Oak
brushed
waxed
clear grey
brushed
waxed
sea grey
brushed
waxed grey
Stone oiled Havana oiled Ocean grey oiled
Cotton white oiled Castle brown oiled Coal oiled
Coral chalk light natural oak Limed oak
FRANKA Wild oak, colours on request
Wild oak
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to
natural fluctuations in colour.
Wood changes its colour in the course of time, due to its exposure to natural light.
The surface must be wiped with a soft, damp cloth.
39. FRANKA P
Solid wood 3 or 5 layers
InfoBox
Value group Accessories Wood group E / E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
Indicate required distance between grooves
73, 100, 120 or 150 mm
Special colour for FRANKA oak and
Franka wild oak on request
Charged according to next higher PG or + 5%
M-03
Range Price group Wood group
FRANKA P Maple 6 + 5% E
FRANKA P Birch 6 + 5% E
FRANKA P Beech 6 + 5% E
FRANKA P Spruce 6 + 5% E
FRANKA P Oak 6 + 5%
FRANKA P Wild oak 6 + 5%
E
E 1
FRANKA P Cherrywod 7 + 20% E 1
FRANKA P Larch 7 + 5% E 1
FRANKA P Nutwood 7 + 5% E 1
FRANKA P Robinia 7 + 10% E 1
FRANKA P Teak 7 + 20% E 1
FRANKA P 73 teak knob K 35 ZR
Total thickness 21 mm.
Glued 3 or 5 layers solid wood with panel effect, edging
with 2 mm radius. Profile: Distance between grooves
7.3 cm, 10 cm, 12 cm and 15 cm. Surface matt silk
lacquered, waxed or oiled.
Choice of colours, FRANKA P Oak
brushed
waxed
clear grey
brushed
waxed
sea grey
brushed
waxed grey
Stone oiled Havana oiled Ocean grey oiled
Cotton white oiled Castle brown oiled Coal oiled
Coral chalk Light natural oak Limed oak
FRANKA Wild oak, colours on request
Wild oak
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to natural
fluctuations in colour.
Wood changes its colour in the course of time, due to its exposure to natural light.
The surface must be wiped with a soft, damp cloth.
40. FRANKA TH
Solid wood 3 or 5 layers
InfoBox
Value group Accessories Wood group E / E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
M-04
Range Price group Wood group
FRANKA TH Maple 6 + 5% E
FRANKA TH Oak 6 + 5% E
FRANKA TH Robinia 7 + 5% E 1
TH: Thermo-wood, i.e. wood preserved without chemicals
Heat-treated wood only absorbs half as much moisture as fresh wood.
This offers the following advantages:
- Less shrinkage and swelling, up to 90% depending
on the type of wood and degree of treatment
- High dimensional stability
- Less internal tension in the wood
- Reduced moisture content equilibrium: in the same climatic
conditions, heat-treated wood will only absorb half as much
water as normally seasoned wood
- Homogeneous colour changes throughout the entire cross-
section, i.e. the heat treatment extends into the middle of the
wood, thus ensuring constant colouring even after being
processed, for instance by cutting and profiling
- Any resin evaporates during the heat treatment process
- Heat-treated wood has short fibres and does not form splinters
when protected from strong UV light
- Long service life, durability class 1
- Thermo-wood is a healthy natural material made from native
regrowing wood which is more resistant than untreated
wood, even without chemical treatment
FRANKA TH Oak handle GMCG 12/224
Total thickness 21 mm.
Glued 3 or 5 layres solid wood, edges with 2 mm radius.
Oiled finish.
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to
natural fluctuations in colour.
Wood changes its colour in the course of time, due to its exposure to
natural light.
The surface must be wiped with a soft, damp cloth.
41. FRANKA TH P
Solid wood 3 or 5 layers
InfoBox
Value group Accessories Wood group E / E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
Indicate required distance between grooves
73, 100, 120 or 150 mm
M-05
Range Price group Wood group
FRANKA TH P maple 6 + 10% E
FRANKA TH P oak 6 + 10% E
FRANKA TH P robinia 7 + 10% E 1
TH: Thermo-wood, i.e. wood preserved without chemicals
Heat-treated wood only absorbs half as much moisture as fresh wood.
This offers the following advantages:
- Less shrinkage and swelling, up to 90% depending
on the type of wood and degree of treatment
- High dimensional stability
- Less internal tension in the wood
- Reduced moisture content equilibrium: in the same climatic
conditions, heat-treated wood will only absorb half as much
water as normally seasoned wood
- Homogeneous colour changes throughout the entire cross-
section, i.e. the heat treatment extends into the middle of the
wood, thus ensuring constant colouring even after being
processed, for instance by cutting and profiling
- Any resin evaporates during the heat treatment process
- Heat-treated wood has short fibres and does not form splinters
when protected from strong UV light
- Long service life, durability class 1
- Thermo-wood is a healthy natural material made from native
regrowing wood which is more resistant than untreated
wood, even without chemical treatment
FRANKA TH P 73 Robinia knob K 35 ZO
Total thickness 21 mm,
glued 3 or 5 layers solid wood with panel effect. Edges
with 2 mm radius. Profile: Distance between grooves
7.3 cm, 10 cm, 12 cm and 15 cm. Oiled finish.
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to
natural fluctuations in colour.
Wood changes its colour in the course of time, due to its exposure to
natural light.
The surface must be wiped with a soft, damp cloth.
42. R
R-01
Wood framed fronts
Page
LUCCA R - 02
CASA R - 03
BRABANT R - 04
GELDERLAND R - 05
TOSCANA R - 06
TOSCANA Paneel R - 06
ARAGON / ARAGON N R - 07
ARLES R - 08
BAVARIA R - 09
FRISIA R - 10
FRAM R - 11
TREVISO R - 12
VIRTON R - 13
VIRTON K R - 13
43. LUCCA
Wood framed front
InfoBox
Value group Accessories Wood group E / E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
R-02
Range Price group Wood group
LUCCA Maple 5 E
LUCCA Beech 5 E
LUCCA Cherrywood 6
amber-coloured
E 1
LUCCA Cherrywood 6
ruby-coloured
E 1
LUCCA Cherrywood amber-coloured knob K 125 E
Solid wood framed front with veneer centre panel.
Width of frame 50 mm, drawer front without frame and
centre panel.
Surface sealed with high quality PUR1 matt silk lacquer.
Maple Beech
Cherrywood
amber-coloured
Cherrywood
ruby-coloured
Service features
The front is designed in accordance with the specific
properties of the materials used in order to guarantee a
long service life.
The surface must be wiped with a soft, damp cloth.
44. CASA
Wood framed front
InfoBox
Value group Accessories Wood group E / E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
CASA:
Special colour for front and carcase on request
Charge + 5%
CASA Cherrywood, Beech and Oak:
Special colour for front and carcase on request
Charged according to next higher PG or + 5%
R-03
Range Price group Wood group
CASA 7 E 1
CASA Cherrywood 7 E 1
CASA Beech 5 E
CASA Oak 5 E
Choice of colours CASA
antique white yellow green red blue
CASA Cherrywood CASA Beech CASA Oak
antique
PG 7
dark ruby
PG 7
antique mellowed
PG 7 + 5%
dark ruby mellowed
PG 7 + 5%
natural
PG 5
natural
PG 5
CASA antique white knob K 33 M
Solid wood framed front with veneer centre panel,
emphasizes hand-crafted. Width of frame 55 mm,
drawer front without frame and centre panel. Surface
finished with two-tone stain technique with patina,
abrasion effect and sealed with high quality PUR1 matt
silk lacquer. The texture of the wood remains visible
with this finish.
The combination of overlapping colours and a special
sanding technique gives this front its Mediterranean flair
as well as high service value.
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
45. BRABANT
Wood framed front
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on
request
Charged according to next higher PG
R-04
Range Price group Wood group
BRABANT 6
light natural, brushed lightly
E
BRABANT 6
antique white
E
Service features
The front is designed in accordance with the specific properties of the wood
to guarantee a long service life. The solid wood front is made from carefully
selected oak.
This wood front owes its high service value to the combination of a lightly
brushed wood surface and high-quality UR1 lacquer.
The surface must be wiped with a soft, damp cloth.
BRABANT natural light, brushed lightly,
handle GMCG 12/224
Brabant antique white handle GMCG 12/224
Total thickness of the front 22 mm.
Solid oak framed front with veneer centre panel.
Width of frame 77 mm, drawer front without frame and centre
panel.
The surface is sealed with high quality PUR1 matt silk
lacquer.
46. GELDERLAND
Wood framed front
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
R-05
Range Price group Wood group
GELDERLAND 6 E
Service features
This wood front owes its high service value to the combination of a lightly
brushed wood surface and high-quality PUR1 coloured matt silk lacquer.
The surface must be wiped with a soft, damp cloth.
GELDERLAND sand yellow knob K 35 ZO
Solid wood framed front with veneer centre panel.
Width of frame 80 mm, drawer front without frame and
centre panel. Surface sealed with high-quality PUR1
coloured matt silk lacquer.
Choice of colours
pure white
RAL 9010
cream white cappuccino
sand yellow reed green fjord blue
47. TOSCANA TOSCANA Panel
Wood framed front Wood framed front with profiled centre panel
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charged according to next higher PG
R-06
Range Price group Wood group
TOSCANA 6 E
TOSCANA antique white, brown patina, knob K 35 ZO L
Solid spruce framed front with veneer centre panel and
glued-in ornamental profile. Cross-rail 60 mm wide,
vertical rail 80 mm wide.
Profiled solid wood drawer front without frame and centre
panel.
The surface is sealed with high quality PUR1 matt silk
lacquer.
Range Price group Wood group
TOSCANA P 6 + 5% E
TOSCANA P antique white, brown patina, knob K 35 ZO L
Solid spruce framed front with veneer centre panel
profiled in panel effect and glued-in ornamental profile.
Cross-rail 60 mm wide, vertical rail 80 mm wide.
Profiled solid wood drawer front without frame and centre
panel.
The surface is sealed with high-quality PUR1 matt silk
lacquer.
Centre panel profiled with V-grooves at intervals of
73 mm.
Service features
The front is designed in accordance with the specific properties
of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
48. ARAGON ARAGON N
Wood framed front Wood framed front with ornamental nails
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Indicate whether surface should be lacquered or
oiled.
Special colour for front and carcase on request
Charged according to next higher PG or + 5%
R-07
Range Price group Wood group
ARAGON 6 E
ARAGON brushed and limed, knob K 33 Z
Solid oak framed front with profiled centre panel of solid
knotty wood. Width of frame 65 mm; the surface is
sanded and lightly brushed, then sealed with high quality
PUR1 matt silk lacquer or oiled.
Range Price group Wood group
ARAGON N 7 E
ARAGON N brushed and limed, knob K 33 Z
Solid oak framed front with profiled centre panel of solid
knotty wood. Width of frame 65 mm with ornamental
nails. The surface is sanded and lightly brushed, then
sealed with high-quality PUR1 matt silk lacquer or oiled.Service features
The front is designed in accordance with the specific properties
of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
49. ARLES ARLES mellowed
Wood framed front Wood framed front
InfoBox
Value group Accessories Wood group E 1
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
ARLES cherry
Special colour for front and carcase on request
Charge PG 7 + 5%
ARLES Cherrywood mellowed
Special colour for front and carcase on request
Charge PG 7 + 10%
R-08
Range Price group Wood group
ARLES Cherrywood
dark ruby 7
brown patinated 7
E 1
E 1
ARLES Cherrywood dark ruby, knob K 71 P
Total thickness of the front 21 mm.
Framed front of solid cherry wood with veneer centre
panel. Width of frame 70 mm, drawer front without frame
and centre panel. Surface finish with twofold staining and
application of patina. The surface is sealed with high-
quality PUR1 matt silk lacquer. The texture of the wood
remains visible.
Range Price group Wood group
ARLES Cherrywood mellowed
dark ruby mellowed 7 + 5%
brown patinated and mellowed 7 + 5%
E 1
E 1
ARLES Cherrywood brown patinated and mellowed
knob K 71 P
Total thickness of the front 21 mm.
Framed front of solid cherry wood with traditionally
applied signs of mellowing and veneer centre panel.
Width of frame 70 mm, drawer front without frame and
centre panel. Surface finish with twofold staining and
application of patina. The surface is sealed with high-
quality PUR1 matt silk lacquer. The texture of the wood
remains visible.
Service features
The front is designed in accordance with the specific properties
of the wood to guarantee a long service life.
The combination of overlapping colours and a special sanding
technique gives this front its Mediterranean flair as well as high
service value. The surface must be wiped with a soft, damp
cloth.
Service features
The front is designed in accordance with the specific properties
of the wood to guarantee a long service life.
The combination of overlapping colours and a special sanding
technique gives this front its Mediterranean flair as well as high
service value. The surface must be wiped with a soft, damp
cloth.
50. BAVARIA
Wood framed front
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charge + 5%
R-09
Range Price group Wood group
BAVARIA 7 E
BAVARIA light sand patinated and mellowed
handle GM 96 B
Framed front of solid spruce with solid wood centre
panel of knotty spruce. Width of frame 60 mm, drawer
front without frame and centre panel. The surface is
sealed with high-quality PUR1 matt silk lacquer. The
texture of the wood remains visible.
Service features
The front is designed in accordance with the specific properties
of the wood to guarantee a long service life.
The combination of overlapping colours and a special sanding
technique gives this front its Mediterranean flair as well as high
service value. The surface must be wiped with a soft, damp
cloth.
51. FRISIA
Wood framed front
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charge + 5%
R-10
Range Price group Wood group
FRISIA 7 E
Service features
The front is designed in accordance with the specific properties of the wood to
guarantee a long service life. It owes its strength to the narrow-ringed wood.
The sophisticated surface finish gives the front its flair and high service value.
The surface must be wiped with a soft, damp cloth.
FRISIA antique white blue patina knob K 72 P
Rift grade Nordic spruce.
Solid wood frame with veneer centre panel and glued-in
decorative profile. Width of frame 60 mm, drawer front
without frame and centre panel. The transparent finish is
obtained by using special stains. The patina is applied by
wiping by hand. The surface is sealed with high quality
PUR1 matt silk lacquer.
antique white
blue patina
antique white
green patina
antique white
yellow patina
antique white
brown patina
52. FRAM
Wood framed front
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charge + 5%
R-11
Range Price group Wood group
FRAM 7
Frame and centre panel of solid Oak
E
FRAM Coal handle GME 22/256
Total thickness of the front 22 mm.
Solid Oak framed front with profiled veneer centre panel.
Width of frame 77 mm, drawer front without frame and
centre panel. The surface is sealed with high-quality
PUR1 matt silk lacquer or coloured hard oil.
Choice of colours
Coal oak
oiled
Castle brown oak
oiled
Coral Chalk oak Cotton white oak
oiled
Havana oak
oiled
Ocean grey oak
oiled
Stone oak
oiled
Natural oak mellowed
oiled
Service features
Wood is a natural material.
Each front is unique, manufactured for a specific order and subject to natural
fluctuations in colour. The wood changes its colour in the course of time, due to
exposure to natural light.
The front is designed in accordance with the specific properties of the wood to
guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
53. TREVISO
Wood framed front
InfoBox
Value group Accessories Wood group E
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
++ 1 Polyurethane ++
Ordering instructions
Special colour for front and carcase on request
Charge PG 7 + 10%
R-12
Range Price group Wood group
TREVISO 7+5% E
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
TREVISO salmon green contrast waxed brown,
knob K 35 ZR L
Solid wood framed front with solid wood centre panel.
Width of frame 88 mm, drawer front without frame and
centre panel. The carefully crafted surface finish is
obtained by applying several coats of lacquer in different
colours. The colour effects are due to wiping the
individual colour coats. The surface is sealed with high-
quality PUR1 matt silk lacquer and waxed.
yellow,
orange brown
contrast,
waxed brown
salmon,
green contrast,
waxed brown
cream white,
beige brown
contrast,
waxed brown
grey,
blue contrast,
waxed brown
pale green,
green contrast,
waxed brown
54. VIRTON VIRTON K
Front with vertical crossbar and solid wood centre panel
Front with vertical crossbar and melamine centre panel
InfoBox
Value group Accessories Wood group E or Laminate group K or KH
Handles Section 1
Visible sides Section 2 UB, 3 OB, 4 HB, 5 UC, 6 OC, 7 HC
Upright panels and shelves 2 cm to 10 cm, Section 13
Light pelmet Section 14
Cornice Section 14
Carcase Standard colours: carcase white, 1131 light grey, 1257 graphite
Furniture board carcase Beech veneer, solid wood front edge, colour selection Section 1
Ordering instructions
VIRTON
Special colour for carcase on request
VIRTON K
Special colour for melamine centre panel and
carcase on request
Charged according to next higher PG
R-13
Range Price group Wood group
VIRTON 5
Oak steamed
E
VIRTON oak steamed knob K 35 ZO
Solid wood front of steamed oak. Glued solid wood panel
of steamed, knotty oak with solid wood rails in declining
widths of 40 - 120 mm, 60 mm wide chamfered rails on
the right and left. Oiled finish.
Range Price group Wood group
VIRTON K 3
Rails of steamed oak
melamine centre panel
E
or
Value group
K / KH
VIRTON K 1131 light grey handle GMCG 12/224
like VIRTON, but with melamine centre panel
Choice of colours for melamine centre panel
1026
1026 HG
white
1027
1027 HG
alpine white
1303
1303 HG
ivory white
1358
1358 HG
magnolia
1365
1365 HG
vanilla
1131
1131 HG
light grey
1331
1331 HG
beige grey
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
Service features
The front is designed in accordance with the specific
properties of the wood to guarantee a long service life.
The surface must be wiped with a soft, damp cloth.
55. Product description
Page
Summary of dimensions 1-02 to 1-04
Carcase raster, System B and C 1-02
Carcase dimensions, System B 1-03
Carcase dimensions, System C 1-04
Product quality 1-05 to 1-08
Furniture board carcase 1-09
Carcase variants 1-10 to 1-11
Glass types 1-12
Framed glass doors 1-13
Handles, knobs 1-14 to 1-20
Sensomatic, Touch-Latch SENSO, Touch-Latch 1-21
Worktops and niche panels 1-22 to 1-23
1-01
56. Carcase raster, System B and C
Carcase height, System B
Carcase height, System C
2 base unit heights, Sections 2 and 5
9 wall unit heights, Sections 3 and 6
5 tall unit heights, Sections 4 and 7
Worktop thickness variable, Section 9
Plinth height variable
QUADRE - The Kitchen Without Handles: carcase dimensions, Section 17
COTTAGE - CAMARGUE - The Kitchens With Front-Mounted Carcase Frames:COTTAGE CAMARGUE The Kitchens With Front Mounted Carcase Frames:
Carcase dimensions, Section 18
1-02
57. Carcase dimensions, System B
Bottom ventilation
necessary in the plinth panel
For bottom ventilation, the ventilation grille is not
517
1-03
58. Carcase dimensions, System C
Bottom ventilation
necessary in the plinth panel
For bottom ventilation, the ventilation grille is not
77
517
1-04
59. Product quality
Quality of material and workmanship
The kitchen is a workplace which imposes high demands on the materials and design.
Meeting these requirements is the driving force underlying our product development.
Materials which do not meet the high demands imposed by day-to-day work in the kitchen
are not used in our products, regardless of whether or not they reflect momentary fashion
trends.
The laminate surface comprises a directly applied, high-quality melamine coating or
multi-layer laminate material.
The laminate edging on doors and the front of carcases is made from impact-proof
polypropylene or multi-layer laminate material and glued with waterproof PU3 glue.
The edging can withstand heat up to approx. 160 °C.
The melamine or laminate surfaces and edging have high mechanical strength,
are easy to care for, enduringly lightfast, permanently easy to clean and
highly resistant to common household chemicals.
The surface finishes and edging used are compatible with foods.
Standard carcase
Sides and shelves 19 mm thick, melamine coating, with flat structure
Back panels 8 mm thick, melamine coating on both sides, with flat structureBack panels 8 mm thick, melamine coating on both sides, with flat structure
Glued into the side, bottom and crossbar on all 4 sides
Edging Laminated on 4 sides. Carcase finish white, front edge 2 mm PP in colour of front
Carcase finish 1131 light grey and 1257 graphite, front edge 2 mm PP in colour of carcase
The edge is glued with PU glue
Shelves 19 mm thick, white melamine coating, edges on all sides, 2 mm PP edge on front side
Colours
Visible sides Colour-matched with the front
Plinth system Adjustable plinth feet from 8 to 24 cm
Plinth panel of coreboard glued with waterproof glue, with sealer strip at the bottom
Coated with HPL laminate, HPLD laminate, veneer or lacquer
Coreboard carcase 19 mm with beech veneer on both sides, front edge veneered to match the front
Special veneers, choice of colours and further details on page 1-09
white
front edge of carcase
in colour of front
1131 light grey
front edge of carcase
in colour of front
1257 graphit
front edge of carcase
in colour of front
1-05
60. Product quality
Fittings
Drawers and Standard: Full-extension steel frame system with concealed runners, white
pull-outs Special equipment: Stainless steel frames with concealed runners, page 15-03
Special equipment: Solid wood frames in beech, maple or nutwood
with bottom runners, page 15-11
Standard runners Carcase width up to 60 cm, drawers and pull-outs with a load capacity up to 40 kg
Carcase width over 70 cm, drawers and pull-outs with a load capacity up to 70 kg
Carcase width over 100 cm with side stabilization for smoother running
Bottom runners Carcase width up to 60 cm, drawers and pull-outs with a load capacity up to 40 kg
Carcase width over 70 cm, drawers and pull-outs with a load capacity up to 60 kg
Sensomatic Details, page 1-21
Touch-Latch Details, page 1-21
Hinges All-metal hinge with various opening angles, can be adjusted in three directions
Wall unit All-metal hinge concealed behind the back panel, can be adjusted in three directions
suspensions
5 year warranty
Emission class
The limit permitted by the Federal Health Office for
emission class E1 is undershot by our kitchen furniture.
BAX Küchenmanufaktur gives the retailer a 5-year warranty as from the date of delivery for all furniture parts
manufactured by the company itself. A warranty period of 2 years applies for moving functional fittings.
Accessories, such as electrical appliances, sinks, sanitary fittings, waste collection systems, light fixtures, etc. are
excluded from the BAX warranty. These are governed by the respective manufacturers' warranty conditions.
Damage due to heat transmitted by electrical, heating or gas appliances is excluded.
Damage due to installation, use and water is excluded from the warranty, as are changes in the colour of veneered and
solid wood parts due to the effects of light and climate.
The warranty exclusively covers the replacement of defective parts, be it through repair or physical replacement, at our
discretion. Compensation of installation and consequential costs is excluded.
Entitlement to performance under the warranty shall be extinguished if parts which we have delivered are modified by
unauthorized or unqualified persons without our explicit consent.
Warranty claims shall be reported to us by the dealer within a proscriptive period of 10 days after acquiring knowledge of
the defect.
The warranty period shall not be extended by replacement or repair of the parts concerned.
1-06
61. Product quality
Furniture board plinth panel
glued with waterproof glue
with HPL1 laminate
and grooved sealing profile
Solid alu plinth corner
Carcase material 19 mm
Back panel 8 mm
Grooved and glued in all-round
Carcase edge 2 mm thick,
impact-proof PP2 material
Waterproof and heat-resistant
PU3 glued bond
Worktop with
integrated
wood edge
Due to the stresses
imposed on the edging,
we particularly recommend
the APIS edge.
Easy care through
re-oiling
The BAX worktop sealer strip in
solid aluminium,
5 mm high,
without visible sealing profile
Aluminium wall sealer strip
for use with a 19 mm
wall covering panel
Furniture board carcase
Panels 19mm thick
Back panel of 8 mm plywood
Grooved and glued in all-round
Stainless steel support
to stabilize
the shelves
1 High-Pressure Laminate
2 Polypropylene
3 Polyurethane
1-07
62. Product quality
3-dimensional adjustable
metal suspension for wall units
Unit doors with
3 hinges
Side stabilization
over 100 cm unit width
Option:
Real stainless steel cover
Edged on 4 sides for
bottom shelf of sink unit
Pl tiPlastic
cutlery tray
Solid wood
cutlery trays
Stacked plate shelf
Drawer and
pull-out base
with non-slip surface
and separating bar
Special partitions
Solid wood pull-out, nutwood
1-08
63. Furniture board carcase
Standard finishes Standard colours on natural lacquered beech:
Furniture board, natural beech veneer, lacquered: BFN
Drawer and pull-out base in Furniture board natural beech veneer, lacquered, without non-slip mat
Non-slip mat, loose: Section 15
Standard frame white
Description Order No.
<|>
cm
A - 7
Beech
veneer
...BFN
A - 7
Standard
colours
...BF
A - 7
Front
colour
...BFF
Base unit TKU 3… up to 59 78 86 93
UB and UC TKU 6 60 91 99 108
Difference
in relation to standard carcase
white, light grey, graphite
BF black-brownBF terra
BF quartz BF amber
UB and UC TKU 6… 60 91 99 108
TKU 7… up to 150 101 110 119
Wall unit TKO 3… up to 59 67 74 83
OB and OC TKO 6… 60 78 86 95
TKO 7… up to 150 91 100 109
Tall unit TKHK 3… up to 59 192 212 229
HBK, HBL, HCK and HCL TKHK 6… 60 213 245 262
TKHK 7… up to 150 246 271 288
Tall unit TKHH 3… up to 59 280 308 325
HBH, HBM, HBS, HCH, HCM and HCS TKHH 6… 60 314 345 362
TKHH 7… up to 150 360 396 413
Extractor hoods TKKA… 121 130 139
1-09
64. Carcase variants
Base and tall units, System B and C
Description Order No.
Depth
cm
Height
cm
Width
cm
…KP
not
standard
…KH …E / L /
KD
…E 1 …L 1
Base units KA58150… 58 up to 81 up to 50 96 148 273 521 762
KA58160… up to 60 105 162 299 570 834
KA58110… up to 100 142 219 404 772 1128
KA58115… up to 150 188 291 535 1022 1495
KA68150… 68 up to 81 up to 50 112 174 320 611 893
KA68160… up to 60 123 191 351 671 981
KA68110… up to 100 166 257 474 904 1322
Value group
Difference in points in relation to standard
carcase
Value group Surface Edge Page
Standard Melamine Carcase white Front colour 1-05
1131 light grey 1131 light grey 1-05
1257 graphite 1257 graphite 1-05
...KP not standard Melamine PP/HPL K-02 and K-03
...KH HPL PP/HPL K-04 to K-07
...KD HPLD HPLD K-08
...KE HPL Genuine wood Wood group E / E1 F-02, F-04 and F-05
...E Genuine wood Genuine wood Wood group E / E2 F-02 and F-04
...E1 Genuine wood Genuine wood Wood group E 1 F-05
...L DD matt lacquer (L) + DD structure lacquer (SL) L-05
...L1 High gloss lacquer (HG) + silk gloss lacquer (SG) L-05
KA68115… up to 150 220 341 627 1198 1751
Tall units KA31350 37 up to 137.2 up to 50 113 174 321 613 897
KA31360 up to 60 125 192 354 677 989
KA31310 up to 100 172 265 489 933 1364
every additional 10 cm KA31315 10 20 31 56 107 157
KA51350 58 up to 137.2 up to 50 177 274 504 962 1406
KA51360 up to 60 195 301 555 1060 1549
KA51310 up to 100 269 416 766 1463 2139
every additional 10 cm KA51315 10 31 48 88 168 246
KA31650 37 up to 162.2 up to 50 122 189 348 665 973
KA31660 up to 60 134 207 382 729 1065
KA31610 up to 100 181 280 516 985 1440
every additional 10 cm KA31615 10 21 32 59 113 166
KA51650 58 up to 162.2 up to 50 192 296 546 1043 1524
KA51660 up to 60 210 325 599 1143 1671
KA51610 up to 100 284 439 808 1544 2257
every additional 10 cm KA51615 10 33 50 93 178 260
1-10
65. Carcase variants
Wall units, roller shutter units, sliding door units and top units, System B and C
Description Order No.
Depth
cm
Height
cm
Width
cm
…KP
not
standard
…KH
…E / L /
KD
…E 1 …L 1
Wall units KA 35050… 27 / 37 up to 50 up to 50 47 72 133 253 370
Roller shutter units KA 35060… up to 60 52 80 148 282 413
Sliding door units KA 35010… up to 100 78 121 223 426 623
KA 35012… up to 120 85 132 243 464 678
every additional 10 cm KA 35015… 10 8 13 23 44 65
KA 36250… 27 / 37 up to 62 up to 50 53 82 151 288 421
KA 36260… up to 60 56 87 160 305 446
Value group
Difference in points in relation to standard
carcase
Value group Surface Edge Page
Standard Melamine Carcase white Front colour 1-05
1131 light grey 1131 light grey 1-05
1257 graphite 1257 graphite 1-05
...KP not standard Melamine PP/HPL K-02 and K-03
...KH HPL PP/HPL K-04 to K-07
...KD HPLD HPLD K-08
...KE HPL Genuine wood Wood group E / E1 F-02, F-04 and F-05
...E Genuine wood Genuine wood Wood group E / E2 F-02 and F-04
...E1 Genuine wood Genuine wood Wood group E 1 F-05
...L DD matt lacquer (L) + DD structure lacquer (SL) L-05
...L1 High gloss lacquer (HG) + silk gloss lacquer (SG) L-05
KA 36210… up to 100 78 121 223 426 623
KA 36212… up to 120 90 138 255 487 711
every additional 10 cm KA 36215… 10 9 13 24 47 68
KA 37550… 27 / 37 up to 75 up to 50 65 101 185 354 518
KA 37560… up to 60 73 112 207 395 577
KA 37510… up to 100 102 158 291 556 813
KA 37512… up to 120 117 181 333 636 930
every additional 10 cm KA 37515… 10 11 17 32 61 89
KA 38750… 27 / 37 up to 87 up to 50 78 121 223 426 623
KA 38760… up to 60 88 136 250 478 699
KA 38710… up to 100 125 193 356 680 994
KA 38712… up to 120 144 222 409 780 1141
every additional 10 cm KA 38715… 10 14 21 39 75 109
KA 31050… 27 / 37 up to 100 up to 50 83 129 237 452 661
KA 31060… up to 60 93 143 264 504 737
KA 31010… up to 100 130 201 369 706 1031
KA 31012… up to 120 148 229 422 806 1179
every additional 10 cm KA 31015… 10 14 22 40 77 113
Top units KA 37050… 27 / 37 up to 70 up to 50 43 66 122 233 341
Roller shutter top units KA 37060… up to 60 48 75 137 262 383
KA 37070… up to 100 63 97 179 343 501
KA 37012… up to 120 70 109 201 383 560
every additional 10 cm KA 37015… 10 7 10 19 37 54
KA 31450… 27 / 37 up to 145 up to 50 100 155 285 544 796
KA 31460… up to 60 110 170 312 596 871
KA 31414… up to 100 147 227 418 798 1166
KA 31412… up to 120 165 255 469 896 1309
every additional 10 cm KA 31415… 10 16 24 45 86 125
1-11
66. Glass types
Clear glass
Satinato
Ornament 504
Antique 75
Ornament 550
Smooth exterior
Wire-mesh reinforced glass
approx. 7 mm thick
Not suitable for
framed glass doors with aluminium profile
Masterligne
Clear glass with bevelled edge
1-12
67. Framed glass doors
Framed glass door
Glass frame to match
the front
Aluminium framed glass door
Width of frame 19 mm
VENTURA Frame
Passepartout 60 mm wide
Glass on
wood-based baseboard
Section G
VENTURA
Glass on
wood-based baseboard
Section G
VENTANA
Passepartout 50 mm wide
Glass on
aluminium baseboard
Section G
Framed glass door
with glazing bars
Same profiling as
front panel
Framed glass door
with glazing bars
Same profiling as
front panel
1-13
68. Handles
Illustration Description Order No. A - 7 A - 7
Price
differ-
ence
Unit
price
WP
Round bar GME 15/224 AN 24
Nickel-plated, aged GME 15/224 AN WP 33
Diameter 15 m
Nickel-plated base
Height 44
Drilling distance 224 mm
Round bar, stainl. steel GM 15/224 E 16
Diameter 15 mm GM 15/224 E WP 23
Nickel-plated base
Height 44 mm
Drilling distance 224 mm
Stainl. steel anodized GME 12/224 16
Cross-section 12 mm GME 12/224 WP 23
Height 42
Drilling distance 224 mm
High-gloss chrome GMCG 12/224 16
Cross-section 12 mm GMCG 12/224 WP 23
Height 42
Drilling distance 224 mm
Price group
Stainless steel GM 15/224 ER free
Diameter 15 mm GM 15/224 ERWP 11
Height 40
Drilling distance 224 mm
Stainless steel GM 14/224 EE free
Cross-section 14 mm GM 14/224 EE WP 11
Height 40
Drilling distance 224 mm
Stainl. steel anodized GME 225/128 16
Diameter 16 mm GME 225/128 WP 23
Height 39 mm
Drilling distance 128 mm
Stainl. steel anodized GME 224 16
Diameter 19 mm GME 224 WP 23
Height 38 mm
Drilling distance 224 mm
Stainl. steel anodized GME 22/256 free
Cross-section 22 mm GME 22/256 WP 11
Height 42
Drilling distance 256 mm
Stainless steel GM 16/160 E free
Diameter 16 mm GM 16/160 E WP 12
Height 39 mm
Drilling distance 160 mm
Stainl. steel anodized GM 14/192 free
Diameter 14 mm GM 14/192 WP 8
Nickel-plated base
Height 36 mm
Drilling distance 192 mm
1-14
69. Handles
Illustration Description Order No. A - 7
Matt chrome-plated GM 21/192 free
Cross-section 21 mm GM 21/192 WP 12
Height 38 mm
Drilling distance 192 mm
High-gloss chrome GMCG 128 free
Cross-section 22 mm GMCG 128 WP 13
Height 39 mm
Drilling distance 128 mm
Nickel-plated GM 96 K free
with ornamental screws GM 96 K WP 8
Height 29 mm
Drilling distance 96 mm
Round bar, beech GH 18/224 B 15
Diameter 18 mm GH 18/224 B WP 23
Chrome base
Height 45 mm
Drilling distance 224 mm
Further versions:
Round bar, maple GH 18 /224 A 15
GH 18 /224 A WP 23
Price group
System handle
Dia. 12 mm
Height 36 mm
Drilling distances:
320/224/192/160/128/96/64 mm
Matt chrome GM 12/320 free
GM 12/320 WP 8
Matt chrome GM 12/224 free
GM 12/224 WP 6
Matt chrome GM 12/192 free
GM 12/192 WP 6
Matt chrome GM 12/160 free
GM 12/160 WP 6
Matt chrome GM 12/128 free
GM 12/128 WP 6
Matt chrome GM 12/96 free
GM 12/96 WP 6
Matt chrome GM 12/64 free
GM 12/64 WP 6
1-15
70. Bar handles STG 15
Stainless steel
System height B and C A - 7 A - 7
Carcase width
cm
Length of handle
mm
Price
difference
Unit
price
STG15 E STG15 E WP
30 236 22 27
35 286 29 34
40 336 30 35
45 386 32 37
Matches standard handle GM 15/224 E 50 436 33 38
Stainless steel round bar, dia. 15 mm 55 486 35 40
Nickel-plated base, height 44 mm 60 536 38 43
70 636 42 48
Bar handles are produced to order 80 736 49 54
90 836 53 58
100 936 54 59
110 1036 68 73
120 1136 76 81
130 1236 85 90
140 1336 93 98
150 1436 101 107
Intermediate sizes: next higher price
System height B A - 7 A - 7
Height of front
System B
mm
Length of handle
mm
Price
difference
Unit
price
Price group
Handle arrangement
horizontal
Handle arrangement
vertical
STG15 E STG15 E WP
495 435 33 38
620 560 40 46
745 685 47 52
870 810 51 56
995 935 54 59
1118 1058 70 76
1222 1162 79 84
1242 1182 81 86
1282 1222 84 89
1368 1308 91 96
1408 1348 95 100
1532 1472 107 112
1617 1557 115 120
Intermediate sizes: next higher price
System height C A - 7 A - 7
Height of front
System C
mm
Length of handle
mm
Price
difference
Unit
price
STG15 E STG15 E WP
371 311 29 34
400 340 30 35
435 375 32 37
560 500 37 42
603 543 39 45
680 620 42 48
805 745 51 56
809 749 51 56
909 849 53 58
930 870 54 59
1222 1162 79 84
1347 1287 89 94
Handle arrangement
vertical
543
603
1368 1308 91 96
1472 1412 99 105
1617 1557 115 120
Intermediate sizes: next higher price
1-16
71. Bar handles STG 14
stainless steel coloured, anodized
System height B and C A - 7 A - 7
Carcase width
cm
Length of handle
mm
Price
difference
Unit
price
STG14 STG14 WP
30 236 11 17
35 286 14 20
40 336 16 22
45 386 17 23
Matches standard handle GM 14/192 50 436 18 24
Stainless steel round bar, dia. 14 mm 55 486 19 25
Nickel-plated base, height 36 mm 60 536 21 26
70 636 23 28
Bar handles are produced to order 80 736 27 32
90 836 31 36
100 936 36 40
110 1036 39 45
120 1136 43 49
130 1236 57 62
140 1336 68 73
150 1436 73 79
System height B A - 7 A - 7
Height of front
System B
mm
Length of handle
mm
Price
difference
Unit
price
Price group
Handle arrangement
horizontal
Handle arrangement
vertical
Intermediate sizes: next higher price
STG14 STG14 WP
495 435 18 24
620 560 22 28
745 685 26 32
870 810 29 35
995 935 35 42
1118 1058 40 46
1222 1162 44 51
1242 1182 46 52
1282 1222 57 64
1368 1308 64 72
1408 1348 69 76
1532 1472 72 80
1617 1557 76 84
System height C A - 7 A - 7
Height of front
System C
mm
Length of handle
mm
Price
difference
Unit
price
STG14 STG14 WP
371 311 15 21
400 340 17 22
435 375 18 23
560 500 20 26
603 543 21 27
680 620 22 28
805 745 28 34
809 749 28 34
909 849 33 39
930 870 34 41
1222 1162 45 51
1347 1287 62 69
Handle arrangement
vertical
Intermediate sizes: next higher price
543
603
1368 1308 64 72
1472 1412 69 77
1617 1557 76 84
Intermediate sizes: next higher price
1-17
72. Handles / handle strips / recessed handles
Illustration Description Order No.
Carcase
<|>
cm
A - 7 A - 7
Price
difference
Unit
price
WP
Recessed handle GMU 29
175 mm wide GMU WP 29
Hidden recessed handle VGMU 16
cut into edge of door VGMU WP 16
100 mm wide
Kitchen layouts without handles, Section 17
Aluminium handle strip LS 23
Surface LS WP 33
Silk gloss
GWL GWL WP
Handle strip, stainl. steel GWL / GWL WP 30 57 70
max. length 245 cm 35 57 70
40 59 73
45 59 73
Price group
50 59 73
55 61 77
Can also be fitted vertically, depending on layout 60 61 77
Intermediate sizes at next higher price 70 69 87
80 73 93
90 73 93
100 79 98
110 81 100
120 95 120
130 119 144
140 139 164
150 170 195
every additional 10 cm or
part thereof 17 26
Angled handle, stainl. steel GW 90 E 16
90 mm wide, GW 90 E WP 16
flush with edge of door
integrated,
for use with
all flat fronts
Stainless steel, overlying GMR 32 16
70 mm high GMR 32 WP 16
57 mm wide
Stainl. steel, flush-mounted GMR 32 FB 24
Cutout for recessed handle for FRANKA page M-02
Cut-out for recessed handle GMFR 100 11
35 mm high
100 mm wide
Special width GMFR S 21
Specify position in accordance with layout:
vertical, horizontal, top or bottom
1-18
73. Knobs / Handles
Illustration Description Order No.
Value
points
Illustration Description Order No.
Value
points
Beech KB 1 free Spruce K 61 free
Diameter 45 mm KB 1 WP 5 Diameter 40 mm K 61 WP 5
Height 35 mm Height 28 mm
Rotary part in stainl. steel K 135 E free Beech K 11 B free
Diameter 35 mm K 135 E WP 9 Diameter 32 mm K 11 B WP 5
Height 27 mm Height 28 mm
Rotary part in stainl. steel K 125 E free Oak K 11 E free
Diameter 25 mm K 125 E WP 6 Diameter 32 mm K 11 E WP 5
Height 20 mm Height 28 mm
Antique brass K 33 M free Antique pewter coloured K 33 Z free
Diameter 30 mm K 33 M WP 8 Diameter 30 mm K 33 Z WP 12
Height 26 mm Height 26 mm
Stainless steel K 30 E free Stainless steel KC 50 E free
Diameter 30 mm K 30 E WP 7 Height 40 mm KC 50 E WP 10
Height 22 mm
White K 71 P free Ivory K 72 P free
Nickel-plated base K 71 P WP 10 Nickel-plated base K 72 P WP 16
Diameter 27 Diameter 27
Height 34 mm Height 34 mm
High-gloss chrome KQ 55 CG free Stainl. steel anodized KQ 55 E free
Diameter 55 mm KQ 55 CG WP 8 Diameter 55 mm KQ 55 E WP 8
Height 25 mm Height 25 mm
1-19
74. Handles / Knobs
Illustration Description Order No.
Value
points
Illustration Description Order No.
Value
points
Coloured Coloured
Pewter antique GMA 64 Z free Pewter antique K 35 ZR free
Height 16 mm GMA 64 Z WP 5 Diameter 35 mm K 35 ZR WP 5
Drilling distance Height 25
64 mm
like GMA 64 Z GMA 64 Z L1 12 like K 35 ZR K 35 ZR L1 12
in front colour GMA 64 Z L1 WP 17 in front colour K 35 ZR L1 WP 17
lacquered lacquered
Recessed handle GMA 64 B free
Bronzed GMA 64 B WP 5
Height 16 mm
Drilling distance
64 mm
Coloured K 35 ZO free Bronzed K 35 BO free
Pewter antique K 35 ZO WP 5 Height 35 mm K 35 BO WP 5
Height 35 mm
like K 35 ZO K 35 ZO L1 12
in front colour K 35 ZO L1 WP 17
lacquered
Coloured K 25 ZO free
Pewter antique K 25 ZO WP 5
Diameter 25 mm
Height 25 mm
like K 25 ZO K 25 ZO L1 12
in front colour K 25 ZO L1 WP 17
lacquered
Coloured GM 96 Z free
Pewter antique GM 96 Z WP 5
Height 21 mm
Drilling distance 96 mm
like GM 96 Z GM 96 Z L1 12
in front colour GM 96 Z L1 WP 17
lacquered
Bronzed GM 96 B free
Height 21 mm GM 96 B WP 5
Drilling distance 96 mm
1-20