Block diagram reduction techniques in control systems.ppt
Using smart plant technology to support engineering and radiation survey for nuclear decommissioning
1. Using SmartPlant Technology to Support
Engineering and Radiation Survey for Nuclear
Decommissioning
A Case Study of the Beloyarskaya Nuclear Power Plant in Russia
Dmitry Dorobin
Alexander Semenov
2. NEOLANT distributed engineering process
Requirements
General
layout
P&ID and
other
schematic
(2D)
Collision detection (3D)
Civil and
structural
Equipment
design Process
design
DrawingsInformation model
Moscow
Krasnoyarsk
Kaliningrad Stavropol
2
7. NPP typical life cycle in Russia
1966
Project start
1973
NPP work
start
2003
End of projected
life cycle
2018
End of prolonged life
cycle
2010
2023
Turning NPP to the
nuclear safe state.
Getting the license for
decommissioning.
Projecting and
building Projected life
cycle
Prolonged life
cycle
years
years
years
Decommission process (>50 years)
7
8. Russian nuclear plants
Status map for 2020:
legend:
In original operation license
Prolonged operation license
Plant shut down
KolNPP
LNPP
SNPP KaNPP
KNPP
NNPP
BiNPP
“MAYAK”
Siberian Chemical Plant
BelNPP
Mining-chemical plant
BalNPP
RNPP
8
25. IMS USAGE IN OPERATION PHASE,
MAINTENANCE AND REPAIR, ETC
26. IMS functions and architecture for operations
IMS functions
Data exchange with
prime design contractor
using 3D
Data exchange with
existing systems
NPP
Change
management
EAM CMMS SCADA
Operational
tasks
HR management
Safety/security
Materials
Fire safety
Radiating safety
Trainings
Equipment models
Radioactive waste
volume
Engineering and
Radiation Survey
NPP
configuration
data
structuralization
Archive
As-build 3D
model
NPP
components
characteristic
26
27. Data exchange with prime design contractor using 3D
Changed 3D model and data
Modification or repair
issue
NPP
Prime design contractor
Design IMS
Operation IMS
27
28. Operational and maintenance (for example weld
inspection management)
It's easy to access all engineering
information and inspection's data
through 3D model.
There are very important sources of
information that require constant
monitoring for NPP safety operation:
weld conditions for tanks, radioactive
drain headers, pipelines and other high-
pressure equipment.
IMS based on 3D engineering model is a
very powerful tool for collecting, storing
and providing an intuitive access to all
operational data.
On this slide you can see the result of
automatic indication NPP welds based on
operational data:
• green - an inspection was done,
normal condition
• orange – missing inspection more
than 3 days
• red – missing inspection more than 10
days.
28
29. Operational and maintenance (for example weld
inspection management)
29
There are very important sources of
information that require constant
monitoring for NPP safety operation:
weld conditions for tanks, radioactive
drain headers, pipelines and other high-
pressure equipment.
IMS based on 3D engineering model is a
very powerful tool for collecting, storing
and providing an intuitive access to all
operational data.
On this slide you can see the result of
automatic indication NPP welds based on
operational data:
• green - an inspection was done,
normal condition
• orange – missing inspection more
than 3 days
• red – missing inspection more than 10
days.
It's easy to access all engineering
information and inspection's data
through 3D model.
30. Operational and maintenance (for example
equipment inspection management)
30
On this 3D model you can see
turbine island part
There is color marked information
about equipment state, that was
receive from inspections
34. Fire evacuation routes modelling:
The room, where we have troubles,
marked red (information was
automatically receive from instruments)
Nearest rooms, where personnel works
are marked blue.
Evacuation route that personal should
use is marked green.
We can quickly get information about
every room: fire resistance
characteristics, fire-fighting equipment,
etc.
This visualization helps to get all
information for decision to eliminate fire
and personal evacuation.
Fire safety
34
38. Creation of as-build and radiation
information model
1. As-build engineering 3D model with the
superimposed radiation situation
2. Actual physical structure of an object
3. Weight and dimensional characteristics, component
materials, other characteristics
4. 360-degree panoramic photo, other data of
comprehensive engineering and radiation survey
5. Electronic documentation archive
6. Intelligent process diagrams
Basic data:
As-build verification (laser
scanning)
Collecting topological
information with a
millimeter accuracy
Recreating as designed engineering
model from existing design and
operational documentation
Gamma scanning
Determining equipment “hot spots”
Radiation monitoring
Plant radiation condition
information
360-degree
panoramic photo
Visualization of real
condition of a plant
38
39. As-build radiation information model life cycle
Plant shut down
The beginning of
decommissioning
Comprehensive engineering
and radiation survey
As-build radiation
information model
Creation
Decommission activities (dismantle, radioactive waste utilization, etc.)
Information is available to all
participants of decommissioning
The model is applied for planning and
simulation of decommission work
Updating
39
44. The applied technologies:
Laser scanning
The main characteristics
Accuracy: from 1 мм
Range: to 2500 м
Scanning time: 2-3 min
Quantity of points: to several million
Laser scanning is a technology providing a people-independent way of obtaining actual reliable topological
information about a condition of an object within shares of millimeter.
It is active applied since the end of the 90th years in such branches as oil and gas industry and metallurgy
when collecting initial information to carrying out modernization and reconstruction of productions.
It was initially developed in France in the late eighties for recovery of documentation to nuclear objects.
44
45. Laser scanning.
As-build model creation technology
Initial object
Cloud of points
As-build 3D modelScan
Cloud of points creation
Binding to uniform
system of coordinates
Cleaning of low-quality
measurements
3D model
actualization
45
47. Leningradskaya NPP turbine island part 3D model
(on the basis of laser scanning)
Laser scanning.
Topological information quality comparison
47
48. In most cases existing plant documentation significantly differs from the actual configuration which causes considerable
disparities of design and actual volumes of the radioactive waste complicating decommissioning
Laser scanning.
Topological information quality comparison
48
50. As-build radiation IMS and turbine island deconstruction
work plan of Beloyarskaya NPP
The project characteristics
Plant:
Turbine island of units
1,2 of Beloyarsk NPP
Customer:
Joint Stock Company
«Research &
Demonstration Center
Decommission Nuclear
Reactors»
Work time: 2013
Duration of scanning: 1 week
Duration of creation of
IMS of a turbine island
(including work plan):
3 month
Cost: ~2 million $
50
58. Results of measurements of a radiation background in rooms of the turbine island on elevation level +3.800, +4.050, +5.500
Integration of comprehensive engineering and radiation
survey data into 3D engineering model.
Points of radiation control
58
61. Comprehensive engineering and radiation survey data
integration into IMS. Equipment “hot spots”
61
Based on all this data about equipment, piping,
structure and others the following calculation can be
done:
• radioactive waste volume according to
categories: high-level, middle-level and low-
level radioactive waste.
• radioactive decontaminant volume and liquid
radioactive waste volume.
• radioactive waste volume specifications.
62. Decommission scheduling and simulation using as-build
radiation IMS
Initial state - Before dismantle Final state – After equipment removal
Work plan to dismantle of the main equipment, pipelines and piping components of a turbine unit No. 1 of Beloyarsk NPP
62
63. THANK YOU
FOR YOUR ATTENTION!
Dmitry Dorobin:
dorobin@neolant.ru
Alexander Semenov:
semenov@neolant.ru
neolant.com
twitter.com/NeolantGroupEN
facebook.com/NeolantGroupEN
lindkenIn.com/NeolantGroupEN