1. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
NAME MURUGAN PILLAI
CURRENT LOCATION Mumbai India,
CURRENT CONTACT NO +974-50339019, +91-9819316935
CURRENT ADDRESS Qatar Doha Al-Thumama
E-MAIL pmurugan_pillai@yahoo.co.in
muruganpillaipnp@gmail.com
SKYPE ID murugan.pillai12
NATIONALITY Indian
DATE OF BIRTH June 2, 1975
LANGUAGES Hindi, English, Tamil.
TECHANICAL QUALIFICATION:-
DIPLOMA IN MECHANICALENGINEERING
ADDITIONAL QUALIFICATION:-
DIPLOMA IN MS OFFICE - (Computer)
ASNT Level II in:-
Penetrant Test
Magnetic Particle Testing
Ultrasonic Test
Radiographic Test
Visual Test
RTFI Film Interpretation
TRAINING &SKILLS:-
QUALITY AWARNES training from JGC QATAR
PMC training from JGC QATAR
SHES &Full Induction training from JGC QATAR
TSTI 5×5 training from JGC QATAR
Working at Height training from JGC QATAR
Confine Space training from JGC QATAR
Permit Holder from JGC QATAR
Coordination with Labor and Management skills training from JGC QATAR.
SOFTWARE SKILLS:-
Computer application (Dos, Windows)
Advance knowledge of computer handling after computer
Having extensive of computer handling after computer
Software and ability to work on networking environment.
SUMMARY:-
Overall Experience of 12 Years in Piping, HVAC, Static & Rotating, MEP in Oil & Gas, Petrochemical
Plantand NuclearPowerPlants,Power Plant, Commercial Building, Substations, Satellite Building.
InvolvedinQualityControlActivitiesQualityAssurance,QualityControlSurveillance, and Supervisor
in Major/Minor Shutdowns, Repair and Replacements to existing facilities & New Construction
Projects.
Handson experiencein Inspection & Commissioning of in all aspectsof Hot water and cold waterline,
ventilation, distribution, Air handling unit and associated Electro-Mechanical system.
Job Responsibilities Handled:-
As a HVAC &MEP Inspector:-
Performing Plumbing materials receiving inspection such as PVC Pipe etc.,
PerformingHVACmaterialsreceivinginspectionsuchasDuct,Air HandlingUnits, ACC,etc.,
2. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
Co-ordinate withconstructionandQCdepartmentforongoingsite activities
Checking the MEP co-ordination and Builders work drawings
Identifying the material as per the standard drawings and specification.
Witnessing & inspection of the installation of AHU, ACC, etc.
Monitoring / Surveillance inspection for storage, stacking and handling of fittings and
consumables including verification of temperature conditions.
Inspectionforpackaging/loadingfortransportationtosite forinstallation.
ReviewingandClosingNCR of materialspriortoassemblyforscratches,damages,cracks,
delamination,crushing,weathering.
Witnessing the assembly/ joining of PVC Pipes.
Verifying thrust block installation at every change in direction of nonmetallic piping.
Verify and ensure the calibration of instruments for Hydrostatic testing
Witnessing the pneumatic testing of installed Copper piping.
Performing routinely inspection for package air-conditioning unit, split and window type
units for their compressors, pneumatic controls, steam humidifiers, fan coil and controls.
Inspectionof Fire waterdistributionlines.
As a Piping Inspector:-
Acts as clientrepresentative andwitnessthe hydrotestof pipingasperRFI,and Holidaytest
of UG pipes.
Implementationof MaterialsColorcodingsystemasperProjectSpecification&
Requirement.
CarriedoutInspection,surveillance,monitoringof Mechanical SteelStructure,Pipingasper
the ApprovedInspectionandTestPlanrequirement.
Performline checkingpriortohydrotesting.
Responsible forthe preparationof variousengineeringProcedure forThe construction,
FabricationandInstallationof Mechanical Piping.
Responsible forthe Preparationof InspectionandtestplanforVariousDiscipline
(Mechanical Piping/SteelStructure )
CarriedOutInspection,surveillance,monitoringof VariousMechanical Pipingasperthe
ApprovedInspectionandTestPlanrequirement
Supervise andmonitorthe day-to-dayqualityactivitiesof the sub-contractor.
Coordinate andmonitorinthe fabricationshoponwhichto prioritize the continuityspools
as per the erectionschedule andliaisewithclientconstructionrequirement.
Conductfinal walkdownpriorto restatementandpreparationof punchlist,if required.
Provide random checkingof installation,paintingandinsulationactivitiesof the projectas
perthe ITP.
Involve insafetyaspectof the project.
Witnessalignmentandmonitorstructural steel installationandalignmentasperthe project
requirementincludingtorqueingandassembly.
Prepare testpackage,execute,monitoranddoline checking/walkthroughpriortoissuance
of requestforinspectiontoclientforHydro/Pneumatictesting.
Investigate andresolve fit-uporsequencingproblemsinrelationtothe approveddesign.
Readingandcomplete understandingof plans,IsometricDrawingsandP& ID’s.
Ensure that transferthe SpecificationandHeatNumberduringcuttingof pipe.
Inspectionof PipingFabricationandErectionaccordingtoClient’sSpecification&Code
B31.3.
3. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
Qualitycheckof Hydro-Testingequipmentsuchasmanifoldvalves,pumpsgaugespriorto
Hydro-Testingactivities.Well versedwithIsometricdrawings.
ReceivingvisualInspectionof all Mechanical,Piping,Valves,andMaterialsasperPurchase
Order/Packinglist/DeliveryNote/ShippingDocuments.
MonitoringJointVisual Inspectionof all receivedMechanical,Piping,Valves&Steel
structure MaterialswithClient.
ConductingInspection/verificationandmonitoringof procuredmaterialatreceiving
warehouse andfordirectdeliveryatjobsite.Thisincludesverificationof material
discrepancyagainstpurchase order,material datasheet,marking&identificationandif any
damages/Shortage initiateD.R& Quarantine.
Establishingdailyworkprogramsandsupervisingactivitiestomonitorperformance and
progress.
Conductingprocedure andperformance QualificationtestasperAWS D1.1.
Reviewof isometricdrawings
Monitoringall fitting/weldingactivitiesperformedinthe projectincludingpipingand
supportsforpiping.
Witnessing UT,PTtestcarriedout inconjunctionwithsite repairof Vendorsupplied
materials.
Incomingprojectmaterial inspection.
Preparationpressure testpackagesandphysical checkof linesinaccordance withP& ID and
isometricdrawings.
Provide on-shore technical interfacewiththe customeronvariouspipingandstructural
engineeringmattersrelatedtothe designandconstruction.
Interface withvariouslocal fabricators(e.g.,Structural andEquipmentModules).
PreparingPipingandSteamTracingPunchList(Pre-Test&Post-Test).
InvolvementinHydro-TestandPneumaticTestpackage preparation&witnessingPressure&
Pneumatictestpriortorelease the TestPack.
Reviewof Mill testcertificatesforRAWmaterial
Punchlistpreparation
As a Static & Rotatory Equipment Inspector:-
Co-Ordinationof QA /QC Activitiesof EquipmentatField.
ReceivingMaterial Inspectionof equipmentarrivedatsite andensureswithoutdamage with
preservationcheckandacceptedbyclientpriortoerection.
Confirmequipmentorientationpriortoerection.
Ensure Tools/EquipmentInstrumentsare properlycalibratedbeforeusing.
Checkingthe Sequence of the EquipmentErection.
Prepare the Documents&Reportsfor the Inspection.
Bolttighteningandflange face inspectiononflange jointinletandoutletof the equipment
as per ASME B16.5;
Verifiesthe positionof the equipmentinaccordance withcustomerapprovedissuedfor
construction(IFC) drawingsorlocationplan;
Pre-InstallationInspection.( Padding)
Conductinspectiononstatic& RotatingEquipmentonleveling,Centering,Elevationand
plumpnessasperapprovedprojectspecification.
AttendweeklyQCmeetingwiththe clientforconstructionprogressreport.
5. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
Release of Structure toconcerndepartmentafterinspection.
ReviewTechnical Submittals.
ReviewDrawingandcoordinate withdisciplineengineer.
Monitorthe contractor Inspectorprogramand qualityprogramare accordingto the drawingas
built.
Preparationandsubmittalsof inspectionnotificationforequipmentandsteel structure to
client.
Preparationof workmethodstatementandsubmittalstoclient.
Identifying,analyzingandsolvingproblems.
HandlingreportsandrelatedData’s.
Knowledgeof Principle andPracticesinthe relateddiscipline.
StrongAnalytical,ProjectManagementandproblemsolvingskill.
Implementingthe QA/QCactivitieswithinthe project.
Inspectionof rawmaterials.
IssuingPunchlistonjobcompletionandclosingpunchlistforfinal completionandhanding
overto client.
Providingtimelyprogressfeedbacktothe QualityManager.
HandlinginProgressinspectionof Structural &FabricationShopIncludingMaterial Traceability.
IncomingMaterial InspectionVerifiedwithMTC.
Receive all the incomingdocuments/drawingsfromclients/DepartmentswithinCompanyand
update the trackingregisterof documentstomonitorcurrentstatus.
Coordination,meeting’swithClientsRepresentative
Punchlistand WalkDown
Ensure accurate reportingof all qualitycontrol activitieswithincompanyproject
organization.
Follow site safety rules, practices and assist site team in promoting a culture of safety on the site
Assistthe ProjectHeadof Qualityinthe preparationof final dossierforhandovertothe
client’operationsgroup.
Attendprojectqualitymeetingsasrequired.
Monitordailyactivitiesandverifycompliance tocustomersspecifications
Conductand ensure activitiesare completedinaccordance withITP
Prepare dailyQCrecordsand final acceptance documentationasrequired
Rejectworkthat doesnotcomplywithor whichwasnot inspected,testedorexaminedin
full compliance withthe requirementsof the drawing&projectspecifications
PROFESSIONAL WORKEXPERIENCE:-
July 2014 – DEC 2014 QDVC DOHA, QATAR
Position: Qa/Qc MEP INSPECTOR(HVAC, MEP & Fire Fighting)
Client : QPM
Project: Sheraton Car Park Project
Responsibilities:-
Inspection of Portable Water Pipe, Fire Water Pipe, Structural, Equipment & Insulation.
Follow of QCS-2007, ASHRAE & SMACNA Standards
In charge for building inspection and overall installation of HVAC Equipment’s (e.g. Air
Handling Units, Air Cooled Air Conditioning Units, Centrifugal Fans, Exhaust fans, Fan Coil
Units, etc.) Ducts & Fire water Pipes / VRU Unit Condensate Drainage System.
Inspection of Plumbing Underground, & Aboveground piping and in process.
Inspection of the HVAC installation, Fire water pipe, Fire water pump, Plumbing above
ground underground scope
Inspection of the fire water alarm value installation & Fire hydrant
6. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
Inspection and Copper Pipe Clearance of Fit up, & weld visual of all and in process.
Review,comment and recommend approval on contractor’s shop drawings, technical field
queries, Method Statements, Inspection and Test Plans
Answeringinspections to the owners RFI in line with approved procedures, specifications,
codesand standardsor site technical queriesandfieldchange designissuedbyengineering.
Follow-upowner’sinspectionplansandapproved inspection procedures. Keep the original
requireddocumentationof inspectionsinorderto document the works provided. Specify if
the owner works status is endorsed and inform them about any encountered aspects the
job.
SEP 2012 – DEC 2013 JGC CORPORATION DOHA, QATAR.
Position: QA/QC INSPECTOR (HVAC, MEP & BUILDING
STRUCTURAL
Client : RASGAS QATAR
Project: QATAR BARZAN ONSHORE PROJECT
Responsibilities:-
Inspection of Portable Water Pipe, Fire Water Pipe, Structural, Equipment & Insulation.
Follow of ASME, ASHRAE & SMACNA Standards
In charge for building inspection and overall installation of HVAC Equipment’s (e.g. Air
Handling Units, Air Cooled Air Conditioning Units, Air Cooled Water Chillers, Fans, Exhaust
fans, Fan Coil Units, etc.) Ducts / Chilled water Pipes & Fire water Pipes / Condensate
Drainage System.
Inspection of Plumbing Underground, & Aboveground piping and in process.
Inspection of the HVAC installation, Chilled water pipe, Fire water pipe, Structural scope,
Plumbing above ground underground scope & Elevator.
Inspection of the HVAC installation, start-up, air balancing, pre-commissioning and
commissioning of the AIR CONDITIONING SYSTEM, HVAC & MEP
Inspection and Copper Pipe Clearance of Fit up, & weld visual of all and in process.
Coordinatesotherdisciplines’interfaceslike electrical andInstrumentationdepartment,civil
underground distribution and facilities, and with Mechanical Works.
Marking Request for Inspection Formats (IR) and Field Inspection Reports.
Review,comment and recommend approval on contractor’s shop drawings, technical field
queries, Method Statements, Inspection and Test Plans
Answering inspections to the owners RFI in line with approved procedures, specifications, codes
and standards or site technical queries and field change design issued by engineering. Follow-up
owner’s inspection plans and approved inspection procedures. Keep the original required
documentation of inspections in order to document the works provided. Specify if the owner
works status is endorsed and inform them about any encountered aspects the job.
TestPackage & Clearingof generatedPunchListItems,aswell asleadingandprovide details
to subcontractor on how to clear punch list on easy manner of work execution.
FEB 2012 – JUNE 2012 HEURTEY PETROCHEM LTD. MUMBAI, INDIA.
Position: QA/QCINSPECTOR Piping & Steel Structure
Client : LARSEN & TOUBRO LTD,India
Project: ONGC MANGALOREPETEROCHEMICALS.
Responsibilities:-
Follow of ASME, API, and ISO Standards.
Inspection of Tanks/Vessels, Pipes and Quality Control of Structural Work, Handrail, and
Ladder & Plat form.
Carried out Ultrasonic thickness measurement of pipe line corrosion check on Pressure
Vessels, Tanks, Exchanger, and Column.
7. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
Worked as a Multi Technician (UT, RT, DPT, and MT).
QA/QC activities Control through PMS (Project Management System).
Monitoring of welding consumables, Preheating, Welding and weld visual inspection,
PWHT/NDT, Hardness Test, PMI Test as per the WPS, ITP.
Attending Daily weekly Meetings with Client, Co-Ordination with Client for Technical
Discrepancies.
Marking RequestforInspectionFormats(IR) and Field Inspection Reports and maintaining all
Office Documentations.
Review, comment and recommend approval shop drawings, technical field queries, Method
Statements, Inspection and Test Plans
Maintaining all Office Documentations.
AUG 2011 – JAN 2012 ENERMES ENGINEERING COW.L.L QATAR.
Position: QA/QCENGINEER (HVAC & MEP)
Client : TERNA - QATAR
Project: COMMERCIAL DEVELOPMENT AL MERQAB - AL
NASSER STREET
Responsibilities:-
Review, comment and recommend approval Coordination, shop drawings, technical field
queries, Method Statements, Inspection and Test Plans.
HVAC Material Receiving Inspection and Test Certificates Verification.
Follow of ASME,ASHRAE & SMACNA Standards
In charge for building inspection and overall installation of HVAC Equipment’s (e.g. Air
HandlingUnits,AirCooledAirConditioningUnits,Fans,Exhaustfans,FanCoil Units,etc.) Ducts
/ Chilled water Pipes & Fire water Pipes.
Preparationof InspectionandTestPlans,WorkInstructionsandformats & Preparation of Test
Pack and review.
Inspection and Clearance of & Copper Pipes Fit up, weld visual of all Copper Pipe.
Inspection and Clearance of PVC Pipe Lines joint underground, above ground pipe and in
process Inspection.
Department, civil underground distribution and facilities, and with Mechanical Works.
OCT 2009 – MAR 2010 LAHOUD ENGINEERING CORPORATIONABUDHABI
Position: QA/QC ENGINEER Piping (Test Pack Coordinator)
Client : BOROUGE-2 PUNJ LLOYD, RUWAIS, ABUDHABI
Project: ABUDHABICOMPANYLIMITEDBOROUGE-2
POLYEFINS
Responsibilities:-
Inspection of Insulation Piping System wise and conform it is according to P & ID, Isometric
Drawings.
Follow of ASME, & BOROUGE Standards
Carried out penetrate testing on pipe and tube weld joints and nuclear parts.
Preparation of Test Package & Clearing of generated Punch List Items, as well as leading and
provide detailstosubcontractoronhow to clearpunchliston easymannerof work execution.
Attending Daily weekly Meetings with Client, Co-Ordination with Client for Technical
Discrepancies.
Worked as a Multi Technician (UT, RT, DPT, and MT).
QCI activities Control through PMS (Project Management System).
Review, comment and recommend approval on contractor’s shop drawings, technical field
queries, Method Statements, Inspection and Test Plans.
8. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
AUG 2008 – JULY2009 NASSER .S.AL CORPORATION LTD SAUDI ARABIA
Position: QA/QC INSPECTOR (Structural & Piping)
Client : SAUDI KAYAN
Contractor: TECNICAS REUNIDAS
Project: JUBAIL PERTROCHMICALKAYAN-II PHENOLICS
PROJECT
Responsibilities:-
Inspection of Piping, & Structural.
Follow of ASME, & SABIC Standards
Worked as a Multi Technician (UT, RT,DPT,&MT),
Monitoringof weldingconsumables, Preheating,Weldingandweldvisual inspection,NDTTest
as per the ITP.
Inspectionof Flange BoltTightening,Flange Alignment Work & Preparation of Survey Report.
Review, comment and recommend approval on contractor’s shop drawings, technical field
queries, Method Statements, Inspection and Test Plans
Preparing site Progress Reports & Material Arrival Notice and doing inspection with Main
contractors QA/QC Engineer and consultant.
Maintainingall Office Documentations & Filleing all office IN & OUT Correspondence & Final
Documentation Work for the Piping, Structural, and Equipment& Painting & Insulation.
JUNE 2007 – AUG 2008 NASSER .S.AL CORPORATION LTD SAUDI ARABIA
Position: QA/QC INSPECTOR (Static &Rotating Equipment)
Client : SABIC
Contractor: LINDE GAS
Project: JUBAIL ASU II GAS PLANT EXPANSIONPROJECT
Responsibilities:-
Preparation of Inspection, Test Plans, Work Instructions and formats.
Inspection of Piping System wise and conform it is according to P & ID, Isometric Drawings.
Review, comment and recommend approval on contractor’s shop drawings, technical field
queries, Method Statements, Inspection and Test Plans
Inspection of Static Equipment & Rotatory Equipment.
Follow of ASME, API Standards
Attending Daily weekly Meetings with Client, Co-Ordination with Client for Technical
Discrepancies.
Submission of Weekly Quality Report With respect of all activities.
UT Gauging for Steam Drums and Pressure Vessels.
Monitoring of welding consumables, Preheating, Welding and weld visual inspection,
PWHT/NDT, Hardness Test, PMI Test as per the WPS, ITP.
Marking Request for Inspection Formats (IR) and Field Inspection Reports.
Inspection of Flange Bolt Tightening, Flange Alignment Preparation of Survey Report.
DEC 2004 – JUNE 2006 LARSEN &TOUBRO LTD, INDIA
Position: QA/QC INSPECTOR (MEP & HVAC)
Client : LARSEN & TOUBRO LTD
Project: KUDANKULLAM ATOMIC POWER PLANT INDIA
Responsibilities:-
Marking Request for Inspection Formats (IR) and Field Inspection Reports.
Inspection of Structural, & HVAC Equipment.
Material Inspection and Test Certificates Verification.
9. CURRICULUM VITAE
QA/QC HVAC & MEP INSPECTOR
Follow of ASME,DW, ASHRAE,SMACNA Standards
In charge for buildinginspectionandoverall installationof HVAC Equipment’s
Inspection of the MEP,HVAC installation, start-up, air balancing, pre-commissioning and
commissioning of the AIR CONDITIONING SYSTEM
Quality Control of Duct & CW Fire Piping, Structural Work, Insulation & Painting.
NOV 2002 – NOV 2004 KSP PUMPS & VALUES MANUFACTURE LTD, INDIA
Position: QA/QC INSPECTOR (Piping)
Client : KSP PUMPS & VALUES MANUFACTURE LTD
Project: KSP PUMPS & VALUES MANUFACTURE
Responsibilities:-
Follow of ISO Standards.
Inspection of Insulation Piping System wise and conform it is according to Drawings.
Carried out penetrate testing on pipe and tube weld joints and nuclear parts.
Submission of Weekly Quality Report With respect of all activities.
Welding of various materials i.e. Carbon steel, Alloy steel and Stainless Steel, Monel etc.
Inspection of Values Flange Alignment Work & Preparation of Survey Report.
FEB 1999 – AUG 2002 TEXMO MOTOR MANUFACTURE WORK INDIA
Position: ERECTION SUPERVISOR
Client: TEXMO MOTOR- INDIA
Project: TEXMO MOTORMANUFACTURE WORK INDIA
Responsibilities:-
Preparation of shift and production, and worker time sheet.
To be follow ISO Standard and approved Isometric Drawings.
Handing of approved Material used at production section.
Submission of Daily & Weekly production Report With respect of all activities.
Monitoring of welding consumables, preheating.
Coordinates other disciplines’ interfaces like site engineer
Handling of light and heavy tools.