1. WPCC-BOARD ROOM|VGA-LAPTOP CONNECTION TUTORIAL
1) Go to Podiumand use keyboard/mousetomake sure youare loggedinunder
ConfWP260eboardroom2username.
2) Go to the PASSWORDandtype in THE EXACT WORDS password#2 andthen SELECT ENTER.
3) Now locate CRESTRON TOUCH-SCREEN.Once itis locatedfind tabsDISPLAY-LEFTandDISPLAY-
RIGHT. First,pressDISPLAY-LEFTand selectON.Next,pressDISPLAY-RIGHTandselectON.
Last, locate the LAPTOP-ICON andSELECTfor DISPLAYLEFT/RIGHT.
4) Now,LOCATE the PODIUM’S-SLIDING-DOORandPLACELAPTOP within the AVAILABLESPACE.
5) Nowyoushouldlocate the VGA-CONNECTORwithLAPTOP-LABELinPODIUM’SSLIDING_DOOR.
At thistime locate youravailable VGA-CABLE.

2. WPCC-BOARD ROOM|VGA-LAPTOP CONNECTION TUTORIAL
6) Next,locate the CONNECTOR-TYPE(S) onthe REARor SIDES of the PC/MAC-LAPTOP.Once you
have determinedthe appropriate CONNECTION-TYPE(S) [I.E.VGA,THUNDERBOLT,DISPLAY-
PORT,and HDMI/MICRO-HDMI].
7) There are several CONNECTOR-TYPESaslistedinSTEP(6).Once you have determinedwhatkind
of CONNECTOR-TYPEyourPC/MAC-LAPTOPpossessesyouare thenable todetermineif itisa
straight-lineconnectionorif youshouldneedthe CONVERSION-CABLEandCONVERSIONBOX.

3. WPCC-BOARD ROOM|VGA-LAPTOP CONNECTION TUTORIAL
8) Afteryouhave pluggedinthe MALE-VGA-CONNECTORtothe PODIUM’S FEMALE-CONNECTOR
youcan take the MALE-VGA-CONNECTORandplugintothe PC/MAC-LAPTOP.
9) If contentdoesn’tAUTO-CONNECTwhenpluggedinpleasecheckyourDISPLAY-SETTINGSor
PROJECTOR-MODE[E.G. FUNCTION-KEY] astheyshouldMIRRORwhatis on the PC/MAC-
LAPTOP.Alsoif utilizingaMAC-LAPTOP RIGHT-CLICKANDSELECT DISPLAYto DUPLICATE or
EXTEND baseduponwhetherthe CURRENTEND USER requesttosee theirMS-PPTnotes.
MALE-VGA
CABLE

4. WPCC-BOARD ROOM|VGA-LAPTOP CONNECTION TUTORIAL
10) If contentyou seekforDISPLAYappearson WPCC-BRLARGE PROJECTORSCREENS as shownin
E.g. 1.1, thenyou shouldbe readytostart your presentation.If contentdoesnotshow on
DISPLAY-LEFT/RIGHTPLEASEREPEAT STEPS 1-9.
(E.g. 1.1 Above)
Note:Once everythingisshowingyoumaynow locate/checkthe function(s)of the
presentation-remote/slide-advancertoensure simultaneous/syncedoperationof the remote
and yourpresentationviathe receiverbeingpluggedinthe machine andbatteriesplacedwithin
it’spowered-housing.
11) Once you have completedall of the stepslistedabove youare now readytoPRESENT your
GREAT MICROSOFT POWER-POINTPRESENTATION atthistime.