LED Component Solutions

Edition 1/2012

LED Component Solutions
I n n o v a t i o n i n L i g h t i n g Te c h n o l o g y

MICROCOMPUTERS • SYSTEMS • COMPONENTS • VERTRIEBS GMBH DISTRIBUTOR OF

Welcome
TO a new era
o f L i g h t i n g
From the LED to the Complete Lighting Solution
Powerful LEDs are advancing ever more to the fore as A further plus factor of the LEDs is their extremely long
ultra-modern lighting, not least because of rising energy service life, which can lie between 25.000 and up to
prices and due to Ordinance 245/2009 of the European 100.000 hours depending on their design. Apart from the
Commission, which defines the basic parameters for opting supply of all components required, the realisation of in-
out of obsolete lighting technologies and opens up enormous novative lighting systems based on powerful LEDs also
potential for the deployment of LEDs in the lighting market. requires specialist technical and economic knowledge.
In the next few years, LED lighting should account for more
than ten percent of turnover with a worldwide market vol- Above all, technical knowledge of high power LEDs and
ume of some 1.4 billion dollars. high-brightness LEDs, secondary optics and driver electronics
as well as ingenious heat management are required. The
It is to be expected that the lighting sector will develop into experts at the MSC lighting competence centres support
the main money-maker for electronic component distribu- you here with sound technical and economic consulting
tors by 2015. expertise when planning your lighting.

Apart from their environmental acceptability, high-quality MSC works with leading manufacturers in the LED fields
lighting diodes are above all up to ten times more energy and supplies everything in one package from the LED to the
efficient and offer more versatile design possibilities than complete lighting system. Be inspired by the many possibili-
conventional lighting. ties of modern LED technology and arrange an appointment
with our experts today.

MSC – Excellence in LEDs
Lighting

2

■ Cromaticity Diagramm 4

■ Cree Brightness Performance Groups 6

■ Cree Xlamp LED Product Portfolio 8
Cree LEDs for Lighting Application Matrix 9
LEDs
Cree Lighting LED Components 9

■ XLamp®
XB-D LED 10
XT-E LED 11
XP-E LED 12
XP-C LED 13
XP-G LED 14
XM-L LED 15
XM-L Easy White LED 16 Secondary Optics

ML-B LED 17
ML-C LED
18
ML-E LED 19
MX-3 LED 20
MX-3S LED 21
MX-6 LED 22
MX-6S LED 23
XLamp MC-E LED
®
24
PCBs
MP-L EasyWhite™ LED 25
XR-E LED 26
XR-C LED 27
MT-G EasyWhite™ LED 28
CXA2011 LED 29

■ Optics
Optics from Carclo 30
Optics from Gaggione 32
Drivers & Controllers
Optics from Khatod 34
Optics from Ledil 36
PCBs 38

■ Drivers & Controllers
Intelligent LED Drivers 40
Driver ICs and DC/DC Converters 42
for HB LED Control
Lighting ASSP for 43
Fluorescent Ballast Connectors
Microcontrollers for LED 44
Lighting Control
AC/DC LED Controller 45
DC/DC LED Controller
LED Drivers for RGB Clusters
AC/DC LED Power Supply 46
DC/DC Constant Current LED Drivers 48

■ LED Lighting Connector Solutions 51

■ Intelligent Development 55 Development

3

Cromaticity Diagramm
Cree’s Standard Chromaticity Regions plotted on the 1931 CIE Curve

In 1931, the International Commission on illumination (CIE)
devised a method for representing colour. The CIE 1931
Chromaticity Diagram is a tool intended to illustrate the
way the human eye experiences light, using an x, y coordi-
nate system. The outer boundary represents colours with a
purity of 100% and the wavelength is listed in nanometers.

Data sheet download:
www.cree.com/products/pdf/XLampXP-G.pdf
www.cree.com/products/pdf/XLampXP-E.pdf
www.cree.com/products/pdf/XLampXP-C.pdf

4

ANSI Neutral White and ANSI Warm White
2600 K - 5000 K

ANSI Cool White
5000 K - 10000 K

Cool White and Outdoor White
3700 K - 10000 K
Warm White
2600 K - 3700 K
Neutral White
3700 K - 5000 K
Outdoor White
4000 K - 5300 K
Cool White
5000 K - 8300 K

n ANSI Binning
n Stand Binning

5

Cree Brightness Performance Groups

Group Min. Luminous Flux Max. Luminous Flux Group Min. Luminous Flux Max. Luminous Flux
Serie Serie
Code @ 350 mA (lm) @ 350 mA (lm) Code @ 80 mA (lm) @ 80 mA (lm)
J 23.5 30.6 HO 18.1 23.5
K2 30.6 35.2 MLB
JO 23.5 30.6
K3 35.2 39.8
M2 39.8 45.7 Group Min. Luminous Flux Max. Luminous Flux
Serie
M3 45.7 51.7 Code @ 50 mA (lm) @ 50 mA (lm)
N2 51.7 56.8 K2 30.6 35.2
N3 56.8 62
K3 35.2 39.8
XRC

N4 62 67.2
M2 39.8 45.7
P2 67.2 73.9 MLE
M3 45.7 51.7
XPC

P3 73.9 80.6
XRE

P4 80.6 87.4 N2 51.7 56.8
Q2 87.4 93.9 N3 56.8 62
XPE

XPEHEW & XPG
XB-D Tj = 85°C

Q3 93.9 100
XT-E Tj = 85°C

Q4 100 107 Group Min. Luminous Flux Max. Luminous Flux
Serie
Q5 107 114 Code @ 100 mA (lm) @ 100 mA (lm)
R2 114 122 HO 18,1 23,5
R3 122 130
J2 23,5 26,8
R4 130 139
J3 26,8 30,6 MLC
R5 139 148
S2 148 156 K2 30,6 35,2
S3 156 164 K3 35,2 39,8

Group Min. Luminous Flux Max. Luminous Flux Group Min. Luminous Flux Max. Luminous Flux
Serie Serie
Code @ 350 mA (lm) @ 350 mA (lm) Code @ 350 mA (lm) @ 350 mA (lm)
F 210 240 P2 67.2 73.9 MX6
G 240 280 P3 73.9 80.6
H 280 320 P4 80.6 87.4
MCE
J 320 370
Q2 87.4 93.9
K 370 430
Q3 93.9 100 MX6 / MX3
M 430 490
Q4 100 107
Group Min. Luminous Flux Max. Luminous Flux Q5 107 114
Serie
Code @ 700 mA (lm) @ 700 mA (lm)
R2 114 122
S6 182 200
T2 200 220 Group Min. Luminous Flux Max. Luminous Flux
Serie
T3 220 240 Code @ 115 mA (lm) @ 115 mA (lm)

T4 240 260 XML P2 67.2 73.9
T5 260 280 P3 73.9 80.6
T6 280 300 P4 80.6 87.4
U2 300 320 Q2 87.4 93.9
MX3S
Min. Luminous Flux Max. Luminous Flux Q3 93.9 100
Group
@ 1100 mA, 6 V; @ 1100 mA, 6 V; Serie
Code Q4 100 107
@ 185 mA, 36 V @ 185 mA, 36 V
D0 400 440 Q5 107 114
E0 440 480 R2 114 122
F0 480 520
MTG Group Min. Luminous Flux Max. Luminous Flux
G0 520 560 Serie
Code @ 60mA (lm) @ 60 mA (lm)
H0 560 600
P3 73.9 80.6
J0 600 650
P4 80.6 87.4
Group Min. Luminous Flux Max.Luminous Flux Q2 87.4 93.9
Serie
Code @ 270 mA, Tj=85 C° @ 270 mA, Tj=85 C°
Q3 93.9 100
E0 590 680
Q4 100 107 MX6S
F0 680 780
Q5 107 114
G0 780 900
CXA2011 R2 114 122
H0 900 1040
J0 1040 1200 R3 122 130

K0 1200 1380 R4 130 139

6

Colour Specification / Bin and Order Code Format

Colour Specifications

XXXXXX-L1- Standard White Typical CRI for Cool & Neutral White is 75 3.700 - 10.000K

XXXXXX-01- Outdoor White Typical CRI for Warm White is 80 2.600 - 3.700K

XXXXXX-H1- 80-CRI White Minimum CRI is 80 4.000 - 5.300K

XXXXXX-P1- 85-CRI White Minimum CRI is 85 –

XXXXXX-U1- 90-CRI White Minimum CRI is 90 –

Bin codes and order codes are configured in the following manner:

Order Code Bin Code

Series Series
XPE = XP-E XPE = XP-E
XPC = XP-C XPC = XP-C
XPG = XP-G XPG = XP-G

Colour specification Colour specification
L1 = White L1 = White
01 = Outdoor White 01 = Outdoor White
H1 = 80 CRI H1 = 80 CRI
P1 = 85 CRI P1 = 85 CRI
U1 = 90 CRI U1 = 90 CRI

Kit number Luminous or radiant
flux group
SSSCCC-BD-HHHH-NNNNN
Internal code Internal code
SSSCCC-BD-WWW-FF-G-AA
Colour Forward voltage group
WHT = White (amber, red-orange, red,
HEW = High-Efficiency high-efficiency white)
White
ROY = Royal Blue Chromaticity or
BLU = Blue dominant-wavelength group
GRN = Green
AMB = Amber Colour
RDO = Red-Orange WHT = White
RED = Red HEW = High-Efficiency
White
ROY = Royal Blue
BLU = Blue
GRN = Green
AMB = Amber
RDO = Red-Orange
RED = Red

7

Cree Xlamp LED Product Portfolio
D ri v ers & C ontrollers
LEDs

White

Single Die

XR-C XR-E XB-D XT-E XP-C XP-E XP-E XP-G XP-G XM-L
Xlamp outdoor outdoor
Footprint (mm) 7.0 x 9.0 2.45 x 2.45 3.45 x 3.45 3.45 x 3.45 5,0 x 5,0
Up to
Max Current 500 mA 1000 mA 1500 mA 500 mA 1000 mA 1000 mA 1500 mA 1500 mA 3000 mA
1000 mA
Viewing Angle 90° 90° 115° 115° 115° 115° 115° 125° 125° 125°

Cool White - flux 87.4 lm 107 lm 130 lm 139 lm 100 lm 122 lm NA 139 lm NA 280 lm

Typical CRI 75 75 NA NA 75 75 NA 75 NA 75
standard ANSI ANSI ANSI ANSI ANSI
Binning NA NA
bins bins bins bins bins bins

Neutral White - flux 80.6 lm 93.9 lm 122 lm 130 lm 87.4 lm 107 lm 114 lm 122 lm 130 lm 260

Typical CRI 75 75 75 75 75 75 70 75 70 NA
ANSI ANSI ANSI ANSI ANSI ANSI
Binning Ansi NA
bins bins sub-bins bins sub-bins bins

Warm White - flux 67.2 lm 89.6 lm 107 lm 114 lm 73.9 lm 93.9 lm NA 107 lm NA 220

Typical CRI 80 80 80 80 80 80 NA 80 NA NA
ANSI ANSI ANSI ANSI ANSI
Binning NA NA NA
bins bins bins sub-bins sub-bins

White

Multiple Die

ML-B ML-C ML-E MX-3 MX-3S MX-6 MX-6S MC-E MC-E MP-L MT-G
Xlamp standard EZW EZW

Footprint (mm) 3.5 x 3.5 6.5 x 5.0 7.0 x 9.0 12.15 x 13.15 9.11 x 9.11

700 mA 700 mA 250 mA 4000 mA
Max Current 175 mA 350 mA 500 mA 400 mA 150 mA 1000 mA 175 mA (per LED) (per LED) (per string)

Viewing Angle 120° 120° 120° 120° 120° 120° 120° 110° 110° 125° 120°

Cool White - flux 23.5 lm 35.2 lm 51.7 lm 114 lm 114 lm 114 lm 130 lm 430 lm 280 lm NA 400 - 560 lm

Typical CRI 75 75 75 75 75 75 75 75 75 NA NA

ANSI ANSI standard EZW
Binning NA EZW
sub-bins sub-bins bins bin

900 lm @150
Neutral White - flux NA NA 370 lm NA mA –
(per string)

Typical CRI NA NA 75 75 80 –

ANSI EZW EZW
Binning NA NA –
bins bins bin

800 lm @150
Warm White - flux 23.5 lm 30.6 45.7 lm 100 lm 100 lm 100 lm 114 lm 320 lm 320 lm mA –
(per string)

Typical CRI 80 80 80 80 80 80 80 80 80 80+ –

ANSI ANSI ANSI EZW EZW
Binning NA
sub-bins sub-bins bins bins bins

8

Cree LEDs for Lighting Application Matrix

LEDs
Discretes Arrays Modules

Indoor
Non-directional XP-E
MX-6 CXA20 LMR4 LMR2
A & E Bulbs, Sconces HEW

Directional XP-G XM-L MC-E MP-L
MR & PAR, Spot, Track XP-E

Downlight XP-E
MX-6 MP-L CXA20 LMR4 LMR2
Ceiling Mount, Pendant HEW

Distributed ML-E MX-6
Cove, FL Retrofit ML-B MX-3

Low & high Bay XP-G XM-L
Warehouse, Industrial

Outdoor
Roadway & Parking XP-G XM-L
Street, Tunnel, Garage

Exterior Area XP-E
MX-6 CXA20 LMR4
Bollard, Wall Pack HEW

Landscape ML-E MC-E

Portable

Mainstream ML-E XP-E

High End XP-G
XR-E
Search, Lantern, Spot XP-E

Cree Lighting LED Components
Ease of Use

Discretes Arrays Modules

MT-G
XM-L
Pe r fo r m a n c e

Pe r fo r m a n c e

MP-L
et

et
Ethern

Ethern

XP-G
XP-E
Directional XP-C XM-L
EZW
XR-E
XR-C MC-E

XP-E
HEW
Pe r fo r m a n c e

Pe r fo r m a n c e

Pe r fo r m a n c e

LMR4
et

et

et
Ethern

Ethern

Ethern

Non-directional MX-6 CXA20
MX-3
LMR2
ML-E
ML-B

9

XLamp® XB-D White LEDs
Smallest lighting-class LED enables dramatically
lower system cost
LEDs

The XLamp XB-D is Cree’s newest lighting class LED, bringing the next generation
of performance and price to LED lighting applications. The XLamp XB-D delivers
similar performance to the XP-G LED in a package that is 48% smaller than the
XLamp XP footprint.

Using Cree’s newest generation of silicon carbide-based LED chips, XB-D is
optimized to dramatically lower system cost in any illumination application.

XLamp® XB-D WarmWhite
Features
n Cree’s smallest lighting class n Wide viewing angle: 115°
LED: 2.45 X 2.45 mm n Reflow solderable - JEDEC
n Up to 136 lm/W in cool white J-STD-020C compatible
(@ 85 °C, 350 mA) n Unlimited floor life at
n Available in white, 80-min CRI ≤ 30 °C/85% RH
white, and 70-min CRI cool white n Electrically neutral thermal path
n 1 A maximum drive current n RoHS- and REACH-compliant
n Low thermal resistance: 6.5 °C/W

Product Specifications

Part Number Package Colour Colour Dominant Max. Tested Forward Viewing Luminous Luminous
Type Temp. Wavelength Current Current Voltage Angle Flux Intensity
(°K) (nm) (mA) (mA) (V) (deg) (mW) (mcd)

Cool White 5.000 - 8.300 NA 1000 350 2,9 115 114 - 130 NA

Neutral 3.750 - 5.000 NA 1000 350 2,9 115 93,9 - 122 NA
White
XBDAWT-00-0000-00000XXXX Xlamp XB-D
Warm 2.700 - 3.750 NA 1000 350 2,9 115 80,6 - 107 NA
White
80-CRI
White 2.600-4.300 NA 1000 350 2,9 115 87.4-100 NA

The CREE XB-D LEDs is the first LED family which is hot-binned across all CCTs.
So don´t forget: Characterized and binned at 85°C!

www.cree.com/products/xlamp_xbd.asp

For information please contact: lighting-cree@msc-ge.com · Tel. +49 6233 347-120
10

XLamp® XT-E
Highest-performing lighting-class LED

LEDs
Cree XLamp XT-E White LEDs are the highest-performance white LEDs available.
The XT-E LED delivers twice the lumens-per-dollar of previously available LEDs
in the popular XP footprint. By leveraging the popular XP footprint, customers
can easily incorporate the XT-E LED into existing XP LED designs to shorten
design cycle and improve time to market.

Built using the latest generation of Cree’s silicon carbide based LED chips that
deliver higher flux and efficacy, the XLamp XT-E White LEDs set new standards
of efficacy, light extraction and quality. Designed to accelerate LED lighting adop-
tion, the XT-E LED delivers up to 148 lumens and 148 lumens per watt in cool
white (6000 K) or up to 114 lumens and 114 lumens per watt in warm white
(3000 K), both at 350 mA, 85°C.

XLamp® XT-E Cool White
Features
n Available in white, 80-CRI min white, n Electrically neutral thermal path
70-min CRI white and royal blue n Vf binning supported for XT-E
n Binned at 85 °C White and Royal Blue
n Cool white efficacy of up to 148 lm/W n XT-E Royal Blue sorted into 2.5-nm-
(@ 85 °C, 350 mA) wavelength bins
n Royal Blue wall plug efficiency of n Unlimited floor life at ≤ 30 ºC/85% RH
up to 53% (@ 85 °C, 350 mA) n Reflow solderable -
n Wide viewing angle: 115-140° JEDEC J-STD-020C Compatible
XLamp® XT-E Warm White n Thermal resistance: 5 °C/W n RoHS- and REACH-compliant
n Maximum drive current: 1.5 A

Lighting Applications
General and directional lighting
n
applications

XLamp® XT-E Royal Blue


(°K) (nm) (mA) (mA) (V) (deg) (mW) (mcd)

Cool White 5.000 - 8.300 NA 1500 350 2,85 115 122 - 139 NA

Neutral 3.750 - 5.000 NA 1500 350 2,85 115 100 - 139 NA
XTEAWT-00-0000-00000XXXX Xlamp XT-E White
Warm 2.700 - 3.750 NA 1500 350 2,85 115 87,4 - 122 NA
White

Cool White 5.000 - 8.300 NA 66 22 46 115 100 - 114 NA
XLamp XT-E Neutral
XTEHVW-Q0-0000-00000XXXX High Voltage 3.750 - 5.000 NA 66 22 46 115 80,6 - 107 NA
White
Version
Warm 2.700 - 3.750 NA 66 22 46 115 67,2 - 87,4 NA
White

XTEARY-00-0000-000000XXX XLamp XT-E Royal Blue NA 450 - 465 1000 350 3,5 140 475 - 500 NA

Don´t forget, also characterized and binned at 85°C!

www.cree.com/products/xlamp_xte_awt.asp

11

XLamp® XP-E LED
Lighting-Class Performance, Small Package
LEDs

The XLamp XP-E LED combines the proven lighting-class performance and
reliability of the XLamp XR-E LED in a package with 80% smaller footprint. This
smaller package extends Cree’s award-winning LED performance into new LED
lighting applications.

Features Applications
n Available in white, royal blue, blue, n Portable n Retail display
green, amber, red, red-orange n LED light bulbs n Transportation
n Low thermal resistance: n Architectural n Emergency
as low as 9 °C/W vehicle
n Signage
n Maximum junction temperature: 150 °C
n Unlimited floor life at ≤ 30° C/85 % RH
XLamp® XP-E n Reflow solderable -
JEDEC J-STD-020C compatible
n Electrically neutral thermal path


Part Number Pack- Colour Colour Dominant Max. Tested Forward Viewing Luminous Luminous
age Temp. Wavelength Current Current Voltage Angle Flux Intensity
Type (°K) (mm) (mA) (mA) (V) (deg) (lm) (mcd)

Cool White 5.000 - 10.000 NA 1000 3,2 115 100 - 122 NA

Neutral White 3.700 - 5.000 NA 1000 3,2 115 80,6 - 107 NA
XPEWHT-L1-0000-00XXX
Warm White 2.600 - 3.700 NA 1000 3,2 115 73,9 - 100 NA

Outdoor White 4.000 - 5.300 NA 1000 3,2 115 100 - 122 NA

XPEROY-L1-0000-00XXX Royal Blue NA 450 - 465 1000 3,2 130 350 - 500 mW NA

XPEBLU-L1-0000-00XXX Blue NA 465 - 485 1000 3,2 130 30,6 - 39,8 NA

XPEGRN-L1-0000-00XXX Green NA 520 - 535 1000 3,4 130 80,6 - 107 NA

XPEAMB-L1-0000-00XXX Amber NA 585 - 595 500 2,1 130 45,7 - 62,0 NA

XPERDO-L1-0000-00XXX Red Orange NA 610 - 620 700 2,1 130 56,8 - 87,4 NA

XPERED-L1-0000-00XXX Red NA 620 - 630 700 2,1 130 45.7 - 73,9 NA
XLamp 350
XP-E
XPEWHT-H1-0000-00XXX 80-CRI White 2.600 - 4.300 NA 1000 3,3 115 73,9 - 100 NA

XPEWHT-P1-0000-00XXX 85-CRI White 2.600 - 3.200 NA 1000 3,3 115 56,8 - 80,6 NA

XPEWHT-U1-0000-00XXX 90-CRI White 2.600 - 3.200 NA 1000 3,3 115 56,8 - 73,9 NA

XPEHEW-L1-0000-00XXX HEW Cool White 5.000 - 8.300 NA 1000 3,3 115 122 - 139 NA
HEW Outdoor
XPEHEW-01-0000-00XXX 2.600 - 5.300 NA 1000 3,3 115 100 - 130 NA
White
HEW Neutral White 3.700 - 5.000 NA 1000 3,3 115 107 - 122 NA
XPEHEW-L1-0000-00XXX
HEW Warm White 2.600 - 3.700 NA 1000 3,3 115 87,4 - 114 NA

XPEHEW-H1-0000-00XXX HEW 80-CRI White 2.600 - 4.000 NA 1000 3,3 115 87,4 - 114 NA

XPEHEW-P1-0000-00XXX HEW 85-CRI White 2.600 - 3.200 NA 1000 3,3 115 73,9 - 93,9 NA

XPEHEW-U1-0000-00XXX HEW 90-CRI White 2.600 - 3.200 NA 1000 3,3 115 73,9 - 87,4 NA

www.cree.com/products/pdf/XLampXP-E.pdf

12

XLamp® XP-C LED

LEDs
The XLamp XP-C LED combines the proven lighting-class performance and
reliability of the XLamp XR-E LED in a package with 80% smaller footprint.
This smaller package extends Cree’s award-winning LED performance into
new LED lighting applications.

n Availablein white n Portable
(2,600 K to 10,000 K CCT), n Backlighting
royal blue, blue, green, red,
n Signage
amber, red-orange
n Retail display
n Maximum drive current:
up to 500 mA
n Low thermal resistance:
as low as 10 °C/W
n Wide viewing angle: 115° – 125°
XLamp® XP-C
n Unlimitedfloor life at
≤ 30° C/85 % RH
n Reflow
solderable -
JEDEC J-STD-020C compatible


(°K) (mm) (mA) (mA) (V) (deg) (lm) (mcd)

Cool White 5.000 - 10.000 NA 500 350 3,4 115 87,4 - 100 NA

Neutral
XPCWHT-L1-0000-00XXX XLamp XP-C White 3.700 - 5.000 NA 500 350 3,4 115 67,2 - 87,4 NA

Warm White 2.600 - 3.700 NA 500 350 3,4 115 56,8 - 80,6 NA

250 -
XPCROY-L1-0000-00XXX Royal Blue NA 450-465 500 350 3,4 125 NA
350mW

XPCBLU-L1-0000-00XXX Blue NA 465-485 500 350 3,4 125 23,5-39,6 NA

XPCGRN-L1-0000-00XXX Green NA 520-535 500 350 3,5 125 56,8 -73,9 NA
XLamp XP-C
XPCAMB-L1-0000-00XXX Amber NA 585-595 350 350 2,2 125 39,8 - 56,8 NA

XPCRDO-L1-0000-00XXX Red Orange NA 610-620 350 350 2,2 125 51,7 - 67,2 NA

XPCRED-L1-0000-00XXX Red NA 620-630 350 350 2,2 125 39,8 - 56,8 NA

www.cree.com/products/pdf/XLampXP-C.pdf

13

XLamp® XP-G LED
Raising the Bar for Efficacy at High Current
LEDs

The XLamp XP-G LED is capable of up to 493 lumens at 92 lumens per watt
when driven at 1.5 A. XLamp XP-G LEDs set the new standard for light output
and efficacy in single-die LEDs, extending the leadership of Cree’s lighting-class
XLamp XP family and giving lighting designers a wide range of price and perfor-
mance options that all share a common footprint.

n Available in white and outdoor white n LED replacement lamps
n ANSI-compatible chromaticity bins n Outdoor
n Maximum drive current: 1500 mA n Commercial
n Low thermal resistance: 6 °C/W n Residential
n Wide viewing angle: 125 ° n Portable
n Unlimited floor life at ≤ 30° C/85 % RH n Off-grid (solar-powered)
n Reflow solderable -
XLamp® XP-G
JEDEC J-STD-020C


Part Number Package Type Colour Colour Dominant Max. Tested Forward Viewing Luminous Luminous
Temp. Wavelength Current Current Voltage Angle Flux Intensity

Cool White 5.000 - 8.300 NA 1500 350 3,0 125° 122 - 139 NA

XPGWHT-L1-0000-00XXX Neutral White 3.700 - 5.000 NA 1500 350 3,0 125° 100 - 122 NA

Warm White 2.600 - 3.700 NA 1500 350 3,0 125° 87,4 - 114 NA

XPGWHT-01-0000-00XXX XLamp XP-G Outdoor White 3.500 - 5.300 NA 1500 350 3,0 125° 107 - 130 NA

XPGWHT-H1-0000-00XXX 80-CRI White 2.600 - 4.000 NA 1500 350 3,3 125° 87,4 - 114 NA

XPGWHT-P1-0000-00XXX 85-CRI White 2.600 - 3.200 NA 1500 350 3,3 125° 67,2 - 87,4 NA

XPGWHT-U1-0000-00XXX 90-CRI White 2.600 - 3.200 NA 1500 350 3,3 125° 67,2 - 87,4 NA

www.cree.com/products/pdf/XLampXP-G.pdf

14

XLamp® XM-L LED

LEDs
The XLamp XM-L is the industry’s brightest, highest performance lighting-class LED.
With breakthrough light output and efficacy, XM-L is designed for very high-lumen ap-
plications such as high-bay or roadway lighting.

XLamp XM-L LEDs offer the unique combination of very high efficacy at very high
drive currents, providing a 20 % efficiency gain over the XLamp XP-G LED at the
same current. With this available efficacy, XM-L can lower total system cost by
reducing the number of LEDs and optics in the system.

n Delivers 1000 lumens at n Street and roadway
100 lumens per Watt n Outdoor area
n Low thermal resistance: 2.5°C/W n Signage
n ANSI-compatible chromaticity bins n High-bay and industrial
n Unlimited floor life XLamp® XM-L
at ≤ 30ºC/85% RH
n Reflow solderable -
JEDEC J-STD-020C


Cool White 5.000 - 8.300 NA 3000 700 3,35 125 260 -280 NA

Neutral White 3.700 - 5.000 NA 3000 700 3,35 125 200 -280 NA
XLamp
XMLAWT-00-0000-0000XXXXX X-ML
Warm White 2.700 - 3.700 NA 3000 700 3,35 125 182 -240 NA

80-CRI White 2.700 - 4.300 NA 3000 700 3,35 125 182 -240 NA

Cool White 5.000 - 8.300 NA 125 44 46 115 200 - 240 NA
Xlamp Neutral White 3.700 - 5.000 NA 125 44 46 115 164 - 220 NA
XM-L High
XMLHVW-Q0-0000-0000XXXXX Voltage
Version Warm White 2.700 - 3.700 NA 125 44 46 115 148 - 182 NA

80-CRI White 2.700 - 5.000 NA 125 44 46 115 148 - 182 NA

www.cree.com/products/pdf/XLampXM-L.pdf

15

XLamp® XM-L EasyWhite LED
LEDs

The XLamp XM-L EasyWhite LED eliminates chromaticity binning, and enables lumi-
naire and bulb manufacturers to deliver the consistent colour and high efficacy light
output of a multi-die LED in the compact XM-L footprint. XLamp XM-L EasyWhite LEDs
can reduce LED-to-LED colour variation to within a 2-step MacAdam ellipse, 94%
smaller than the total area of the corresponding ANSI C78.377 colour region.

The XLamp XM-L EasyWhite LED is the perfect choice for lighting applications where
moderate to high luminous flux output is required from a single, small point source.
Example applications include: LED retrofit bulbs, commercial/retail display spotlights,
and other indoor general illumination applications.

n Availablein 4-step and 2-step n 20-25 W halogen MR, PAR and
EasyWhite bins at 2.700 K, 3.000 K, B10-style replacement lamps
3.500 K, 4.000 K CCT. Small form factor directional
n
XLamp® XM-LEasyWhite LED n Wide range of operating current - lighting
up to 2 A @ 6 V n Track lighting
n 85° C binning and characterization n Accent lighting
n Widevariety of CRI choices: standard
CRI as well as 80, 85, 90 min. CRI

Cree EasyWhiteTM Technology Colour Temperatures – XLamp® MC-E and XLamp® MP-L
EasyWhite „F“ (4-Step) Chromaticity Regions EasyWhite „H“ (2-Step) Chromaticity Regions


Easy White Standard CRI 2.700 - 4.000 NA 2000 700 5,8 115 240 - 340 NA
Easy White, 80-CRI min. 2.700 - 4.000 NA 2000 700 5,8 115 240 - 340 NA
XMLEZW-00-0000-0BXXXXXX XLamp
XM-L Easy White, 85-CRI min. 2.700 - 3.000 NA 2000 700 5,8 115 200 - 280 NA
Easy White Standard CRI 2.700 - 4.000 NA 1000 350 11,6 115 240 - 340 NA
XMLEZW-00-0000-0DXXXXXX XLamp
XM-L Easy White, 85-CRI min. 2.700 - 3.000 NA 1000 350 11,6 115 200 - 280 NA

www.cree.com/products/pdf/XLampXM-L_EZW.pdf

16

XLamp® ML-B LED
Raising the Bar for Efficacy at High Current

LEDs
The Cree XLamp ML-B LED brings lighting-class performance to 1/4-watt LEDs
and continues Cree’s history of leading-edge innovation in LEDs for lighting ap-
plications. The XLamp ML-B LED brings high performance and a smooth look
to a wide range of lighting applications, including linear lighting, under cabinet
illumination and fluorescent retrofits.

n Efficacy of over 116 lm/W T5/T8 bulbs; fluorescent
n
(cool white) replacement
n Available in ANSI-binned white n Under-cabinet lighting
(2,600 K to 8,300 K) n Retail and refrigerated display
n Wide viewing angle: 120° n Panel lights
n 3.5-mm x 3.5-mm package with
25°C/W and electrically neutral
thermal path
n RoHS-compliant • Unlimited floor XLamp® ML-B
life at ≤ 30°C/85% RH



Cool White 4.500 - 8.300 NA 175 80 3,3 120° 23,5 NA
MLBWT-A1-0000-000XXX
Warm White 2.200 - 4.300 NA 175 80 3,3 120° 13,9 - 23,5 NA

MLBAWT-H1-0000-000XXX XLamp 80-CRI White 2.600 - 4.000 NA 175 80 3,3 120° 18,1 - 23,5 NA
ML-B
MLBAWT-P1-0000-000XXX 85-CRI White 2.600 - 4.000 NA 175 80 3,3 120° 13,9 - 18,1 NA

MLBAWT-U1-0000-000XXX 90-CRI White 2.600 - 4.000 NA 175 80 3,3 120° 13,9 - 18,1 NA

www.cree.com/products/pdf/XLampML-B.pdf

17

XLamp® ML-C LED
Versatile, Mid-Power, Lighting-Class LED
LEDs

The Cree XLamp ML-C LED brings lighting-class performance to 1/3-watt LEDs
and continues Cree’s history of leading-edge innovation in LEDs for lighting
applications. The XLamp ML-C LED brings high performance and a smooth look
to a wide range of lighting applications, including linear lighting, LED replace-
ment lamps, fluorescent retrofits and retail-display lighting. The ML-C LED is
available in parallel and series as well minimum 80, 85 and 90-CRI options for
a wide range of color temperatures. With a typical forward voltage of 6.4 V at
50 mA, ML-C series LEDs provide a high-voltage option that can enable a driver
that is cheaper, more efficient and smaller in size to lower system cost.
The minimum-80, 85 and 90 CRI ML-C LEDs enable customers to address
applications, such as retail and restaurant lighting, where high CRI is required.

n Efficacy of over 114 lm/W (cool white) T5/T8 bulbs; fluorescent
n
n Available in ANSI-binned white replacement
XLamp® ML-C (2,800 K to 8,300 K) n Under-cabinet lighting
n Wide viewing angle: 120° n Retail and refrigerated display
n 3.5 mm x 3.5 mm package n Panel lights
n High voltage and minimum n Troffer fixture replacements
80-CRI options n A19 LED replacement bulbs


Cool White 4.500 - 8.300 NA 350 100 3,2 120 26,8 - 35,2 NA
MLCAWT-A1-0000-000XXX
Warm White 2.600 - 4.300 NA 350 100 3,2 120 18,1 - 30,6 NA
MLCAWT-H1-0000-000XXX Xlamp 80-CRI White 2.800 - 6.500 NA 350 100 3,2 120 18,1 - 30,6 NA
ML-C
MLCAWT-P1-0000-000XXX 85-CRI White 2.800 - 4.300 NA 350 100 3,2 120 18,1 - 26,8 NA
MLCAWT-U1-0000-000XXX 90-CRI White 2.800 - 4.300 NA 350 100 3,2 120 18,1 - 23,5 NA
Cool White 4.500 - 8.300 NA 175 50 6,4 120 26,8 - 35,2 NA
MLCSWT-A1-0000-000XXX
Warm White 2.800 - 4.300 NA 175 50 6,4 120 26,8 - 35,2 NA
Xlamp
MLCSWT-H1-0000-000XXX 80-CRI White 2.800 - 6.500 NA 175 50 6,4 120 23,5 - 30,6 NA
ML-CS
MLCSWT-P1-0000-000XXX 85-CRI White 2.700 - 4.000 NA 175 50 6,4 120 18,1 - 26,8 NA
MLCSWT-U1-0000-000XXX 90-CRI White 2.700 - 4.000 NA 175 50 6,4 120 18,1 - 23,5 NA

www.cree.com/products/pdf/XLampML-C.pdf

18

XLamp® ML-E LED / ML-ES LED
Lighting-Class Performance for Linear Applications

LEDs
The Cree XLamp ML-E LED brings lighting-class performance to 1/2-watt LEDs
and continues Cree’s history of leading-edge innovation in LEDs for lighting ap-
plications. The XLamp ML-E LED brings high performance and a smooth look to
a wide range of lighting applications, including linear lighting, LED light bulbs,
fluorescent retrofits and retail-display lighting.

n Efficacy of over 116 lm/W (cool white) T5/T8 bulbs; fluorescent
n
n Available in ANSI-binned white replacement
(2,600 K to 8,300 K) n Under-cabinet lighting
n 3.5 mm x 3.5 mm package with n Panel lights
11 °C/W and electrically neutral
thermal path
n RoHS-compliant XLamp® ML-E
n Unlimited floor life at ≤ 30°C /85 % RH


Cool White 4.300 - 8.300 NA 500 150 3,2 120 39,8 - 56,8 NA
MLEAWT-A1-0000-000XXX
Warm White 2.600 - 4.300 NA 500 150 3,2 120 35,2 - 51,7 NA
MLEAWT-H1-0000-000XXX 80-CRI White 2.600 - 5.350 NA 500 150 3,2 120 30,6 - 51,7 NA
NA
MLEAWT-P1-0000-000XXX 85-CRI White 2.600 - 4.000 NA 500 150 3,2 120 30,6 - 45,7
XLamp
MLEAWT-U1-0000-000XXX ML-E 90-CRI White 2.600 - 4.000 NA 500 150 3,2 120 30,6 - 39,8 NA
NA
MLERED-A1-0000-000XXX Red NA 620 - 630 350 150 2,2 120 18,1 - 23,5

MLEGRN-A1-0000-000XXX Green NA 520 - 535 350 150 3,45 125 26,8 - 35,2 NA
MLEBLU-A1-0000-000XXX Blue NA 465 - 485 350 150 3,2 125 10,7 - 13,9 NA
NA
Cool White 4.500 - 8.300 NA 167 50 9,6 120 39,8 - 56,8
MLESWT-A1-0000-000XXX
Warm White 2.600 - 4.300 NA 167 50 9,6 120 30,6 - 51,7 NA
MLESWT-H1-0000-000XXX XLamp 80-CRI White 2.600 - 5.000 NA 167 50 9,6 120 30,6 - 51,7 NA
ML-ES
NA
MLESWT-P1-0000-000XXX 85-CRI White 2.600 - 4.000 NA 167 50 9,6 120 30,6 - 45,7

MLESWT-U1-0000-000XXX 90-CRI White 2.600 - 4.000 NA 167 50 9,6 120 30,6 - 39,8 NA

www.cree.com/products/pdf/XLampML-E.pdf

19

XLamp® MX-3 LED
Lighting-Class Performance for Every Applications
LEDs

XLamp MX-3 LEDs delivers enhanced light uniformity and LED-to-LED colour
consistency while extending Cree’s lighting-class performance to a broader set
of applications. With the industry’s tightest colour consistency and uniform angu-
lar chromaticity, Cree continues to set standards for LED longevity and consist-
ency.

n Availablein white n LED light bulbs
(2,600 K to 8,300 K CCT) n Cove lighting and wall washing
n Maximum drive current: 400 mA n Under-cabinet lighting
n Electrically neutral thermal path n Fluorescent replacement
n Qualification at max drive current
n RoHS-compliant
XLamp® MX-3


Cool White 4.300 - 8.300 NA 400 300 3,7 120 87,4 - 114,0 NA
MX3AWT-A1-0000-00XXX XLamp MX-3
Warm White 2.600 - 4.300 NA 400 300 3,7 120 73,9 - 100 NA

www.cree.com/products/pdf/XLampMX-3.pdf

20

XLamp® MX-3S LED
Lighting-Class Performance for Linear Applications

LEDs
The Cree XLamp MX-3S LED provides the proven lighting-class performance
and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All
members of the MX-family of LEDs have wide viewing angle, uniform light output
without secondary optics, unlimited floor life, and electrically neutral thermal
path. The XLamp MX-3S LED brings high performance and quality of light to
a range of lighting applications that require near-line-voltage configuration,
including LED light bulbs, fluorescent retrofits and retail-display lighting.

n Available in white n LED light bulbs
(2,600 K to 8,300 K CCT) n Cove lighting and wall washing
n Maximum drive current: 175 mA n Under-cabinet lighting
n Electrically neutral thermal path Fluorescent replacement
n XLamp® MX-3S
n Qualification at max drive current
n RoHS-compliant


Cool White 4.300 - 8.300 NA 150 115 10,7 120 87,4 - 114 NA
MX3SWT-A1-0000-00XXX XLamp MX-3S
Warm White 2.600 - 4.300 NA 150 115 10,7 120 67,2 - 100 NA

www.cree.com/products/pdf/XLampMX-3S.pdf

21

XLamp® MX-6 LED
The New Standard for Indoor Lighting
LEDs

The XLamp MX-6 LED set the lighting-class standard for indoor LED lighting de-
signs, with better colour consistency and higher reliability than incumbent solu-
tions. XLamp MX-6 LEDs deliver high lumen output with low forward voltage so
there is no compromise between light output and efficacy.

n Maximum drive current: 1000 mA n Indoor commercial
n ANSI-compatible chromaticity bins n Kitchen under-cabinet
n RoHS and REACH-compliant n Refrigerated display
n Unlimited floor life at n Fluorescent replacement
<= 30 degrees C/85 % RH n LED light bulbs
n Electrically-isolated thermal path

XLamp® MX-6


Cool White 4.300 - 8.300 NA 350 300 3,3 120 87,4 - 114 NA
MX6AWT-A1-0000-00XXX
XLamp MX-6 Warm White 2.600 - 4.300 NA 350 300 3,3 120 67,2 - 100 NA
80-CRI
MX6AWT-H1-0000-00XXX 2.600 - 4.300 NA 350 300 3,3 120 62 - 93,9 NA
White

www.cree.com/products/pdf/XLampMX-6.pdf

22

XLamp® MX-6S LED
The New Standard for Indoor Lighting

LEDs
The Cree XLamp MX-6S LED provides the proven lighting-class performance and
reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All mem-
bers of the MX-family of LEDs have wide viewing angle, uniform light output
without secondary optics, unlimited floor life, and electrically neutral thermal
path. The XLamp MX-6S LED brings high performance and quality of light to a
range of lighting applications that require near-line-voltage configuration, in-
cluding LED light bulbs, fluorescent retrofits and retail-display lighting.

n Maximum drive current: 175 mA n Indoor commercial
n ANSI-compatible chromaticity bins n Kitchen under-cabinet
n RoHS and REACH-compliant n Refrigerated display
n Unlimited floor life at n Fluorescent replacement
<= 30 degrees C/85 % RH n LED light bulbs
n Electrically-isolated thermal path XLamp® MX-6S


Cool White 4.300 - 8.300 NA 175 60 22,0 120 100 - 130 NA
MX6SWT-A1-0000-00XXX
XLamp MX-6S Warm White 2.600 - 4.300 NA 175 60 22,0 120 80,6 - 114 NA
80-CRI
MX6SWT-A1-0000-00XXX 2.600 - 4.300 NA 175 60 22,0 120 73,9 - 107 NA
White

www.cree.com/products/pdf/XLampMX-6S.pdf

23

XLamp® MC-E LED
High-Lumen Output in a Small Form Factor
Now available in Dynamic White option!
LEDs

The XLamp MC-E LED is a lighting-class, multi-chip LED thet provides high
lumen output, colour consistency and multi-colour packaging flexibility in a
small footprint packaga. The XLamp MC-E LED is available with EasyWhite™
2-step and 4-step bins, wich improve LED-to-LED colour consistency and reduce
manufacturing complexity. Compared to discrete LEDs, XLamp MC-E LEDs re-
duce the distance between LED die, creating a small optical source for excellent
optical control and efficient colour mixing.

Features
n Available
in white, EasyWhite®,
Dynamic White, or colour (RGBW)
n Individually addressable LEDs
n Low thermal resistance
n Electrically-isolated thermal path
n ROHS and REACH-complant

XLamp® MC-E White XLamp® MC-E Colour XLamp® MC-E Dynamic White


MCE4WT-A2-0000-000XXX Cool White 5.000 - 10.000 NA 700 / die 350 / die 3,2 110° 370 - 430 NA
Neutral
MCE4WT-A2-0000-000XXX 3.700 - 5.000 NA 700 / die 350 / die 3,2 110° 280 - 370 NA
White
MCE4WT-A2-0000-000XXX Warm White 2.600 - 3.700 NA 700 / die 350 / die 3,2 110° 240 - 370 NA
XLamp
MCEEZW-A1-0000-0000XXXX MC-E Easy White 2.700 - 4.000 NA 700 / die 350 / die 3,2 110° 280 - 370 NA
EZW 80-CRI
MCEEZW-H1-0000-0000XXXXX 2.700 - 4.000 NA 700 / die 350 / die 3,2 110° 280 - 320 NA
White
EZW 85-CRI
MCEEZW-P1-0000-0000XXXXX 2.700 - 3.000 NA 700 / die 350 / die 3,2 110° 240 - 280 NA
White

Red NA 620 - 630 700 / die 350 / die 2,1 115° 30,6 NA

Green NA 520 - 535 700 / die 350 / die 3,4 115° 67,2 NA
MCE4CT-A2-0000-00AXXXXXX
Blue NA 450 - 465 700 / die 350 / die 3,2 115° 8,2 NA

XLamp Cool White 5.700 - 7.000 NA 700 / die 350 / die 3,2 115° 100 NA
MC-E
MultiColour Red NA 620 - 630 700 / die 350 / die 2,1 115° 30,6 NA

Green NA 520 - 535 700 / die 350 / die 3,4 115° 67,2 NA
MCE4CT-A2-0000-00AXXXXXX
Blue NA 450 - 465 700 / die 350 / die 3,2 115° 8,2 NA
Neutral 3.700 - 4.300 NA 700 / die 350 / die 3,2 115° 80 NA
White
Cool White 6.500 NA 700 / die 350 / die 3,2 110° 100 NA
MCEDWT-A1-0000-0000AXXXX
XLamp Warm White 2.700 NA 700 / die 350 / die 3,2 110° 70 NA
MC-E
Dynamic Cool White 6.000 NA 700 / die 350 / die 3,2 110° 100 NA
MCEDWT-A1-0000-0000AXXXX
Warm White 2.700 NA 700 / die 350 / die 3,2 110° 70 NA

www.cree.com/products/pdf/XLampMC-E.pdf

24

LED Component Solutions

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (20)

Similar to LED Component Solutions

Similar to LED Component Solutions (20)

Recently uploaded

Recently uploaded (20)

LED Component Solutions