Liberty Corn Herbicide used specifically on LibertyLink corn provides post-emergent control of broadleaf and grass weeds, including weeds resistant to glyphosate and multiple herbicide classes. For more information visit: http://www.bayercropscience.us/products/traits/libertylink/ http://www.bayercropscience.us/products/herbicides/liberty/

1. Herbicide Recommendations for LibertyLinkCorn
Weed Control Program
1st Post Application
(Emergence to 10 days or
when weeds are no more
than 3 to 4 inches)
2nd Post Application
Post corn emergence Liberty at 22 fl oz/A
plus residual herbicide
If needed, Liberty at
22 fl oz/A or, if sequential
applications planned,
apply 10 days after
first application
1. Start Clean. Start with a clean, weed-free field by using an effective burndown
application or conventional tillage.
2. Stay Clean. Be aggressive with early season weed management to avoid yield
loss and weed escapes. Residual herbicides applied at burndown, pre-emergence
and/or tankmixed in the first post application help ensure optimal weed
management, particularly if environmental conditions delay timely post
applications. Consider expected weed species and populations as well as
environmental variables when selecting a residual herbicide.
4. Additives: Ammonium sulfate (AMS) can be used at a rate of 1.5 lb/A to 3 lb/A.
5. Maximum Seasonal Use Rate: 44 fl oz/A per growing season.
6. Additional Use Directions:
a. Can be applied broadcast to LibertyLink corn from emergence to V7 growth
stage (seven fully developed leaf collars).
b. Should be applied when winds are less than 10 mph, and not during periods of
temperature inversions.
c. Do not apply within 60 days of harvesting corn forage or 70 days of
harvesting corn grain and corn fodder.
d. Consult product label for full use directions, tankmix partners and restrictions.
APPLICATION GUIDELINES
For LibertyLink®
Corn
Liberty®
is a nonselective contact herbicide that provides
postemergence control of broadleaf weeds and grasses, including
weeds resistant to glyphosate and multiple herbicide classes.
Liberty is a Group 10 herbicide mode of action.*
Available in all LibertyLink®
corn hybrids, including all Herculex®
,
SmartStax™
, Agrisure®
with corn borer protection, as well as in-bag
refuge products Genuity®
SmartStax RIB Complete™
and Refuge
Advanced®
powered by SmartStax, or as a single trait in hybrids
used for refuge acres.
*Herbicide mode of action groups designated by the Weed Science Society of America.

2. Bayer CropScience LP, 2 T.W. Alexander Drive, Research Triangle Park, NC 27709. Always read and follow
label instructions. Bayer, the Bayer Cross, Liberty, LibertyLink and the Water Droplet Design are registered
trademarks of Bayer. Liberty is not registered in all states. AirMix, TurboDrop and TwinFan are trademarks
of Agrotop. Herculex and the HX logo are trademarks of Dow AgroSciences LLC. Refuge Advanced is
a trademark of E.I. du Pont de Nemours & Co. Albuz, Guardian, Total Range and Variable Pressure are
trademarks of Hypro LLC. Genuity and design, RIB Complete, and SmartStax are trademarks of Monsanto
Technology LLC. TeeJet, Turbo TwinJet, VisiFlo and XR TeeJet are trademarks of Spraying Systems.
VariTarget is a trademark of SprayTarget. Agrisure is a trademark of a Syngenta Group Company. For
additional product information call toll-free 1-866-99-BAYER (1-866-992-2937) or visit our website at
www.BayerCropScience.us
CR0212LIBERTA010V02R0
Mixing Instructions
1. Start with properly calibrated
and cleaned equipment.
2. Fill spray tank half full with water.
3. Start agitation.
4. Add AMS to spray tank.
5. Add tankmix partner.
6. Complete filling spray tank with water.
7. Add Liberty and continue agitation.
8. If foaming occurs, use a silicone-
based antifoam agent.
For more information on Liberty, talk to your retailer or
Bayer CropScience sales representative or visit
BayerCropScience.us
How to Spray
As a contact herbicide, following application guidelines is important to ensure
adequate coverage and maximum weed control.
• Use nozzles and pressure that generate medium-size (250 microns to 350
microns) spray droplets.
• Nozzle recommendations:
- Spraying Systems: TeeJet®
VisiFlo®
Flat, XR TeeJet Extended Range Flat
or Turbo TwinJet®
Flat spray tips
- Greenleaf Technologies: TurboDrop®
XL, TurboDrop TwinFan®
or
AirMix®
spray tips
- Hypro: Guardian™
,Variable Pressure™
,Total Range™
or Albuz®
AXI spray tips
- Delavan AgSpray: VariTarget™
Refer to nozzle manufacturers’ catalogs, tech sheets or websites for additional guidance.
• Apply Liberty at 15 GPA of water; increase water if dense weed
canopy exists.
• Apply at ground speed of less than 15 mph to attain adequate coverage.
• Do not apply when wind speeds are greater than 10 mph.
• Add tankmix partner, if needed.
Use Directions
Rate • 22 fl oz/A
Application Window • Up to V7 growth stage
Spray Volume • 15 GPA of water
• If dense weed canopy, increase water volume
Droplet Size • Medium (250 microns to 350 microns)
Rainfast • 4 hours
Wind Speed • Less than 10 mph
Pre-harvest Interval • 60 days of harvesting corn forage
• 70 days of harvesting corn grain and fodder
IMPORTANT: This bulletin is not intended to provide adequate information for use
of this product. Read the label before using this product. Observe all label directions
and precautions while using this product.