Example of safety Training for drivers.

1. PROPER USE OF THE PORTABLE STRAPS

2. Pull excess chain from ratchet leaving no more than two wraps of chain on ratchet. Under no condition are straps to be wrapped around ratchets.

3. Place strap over tire with grab hook end of strap facing chain / ratchet assembly.

4. Hook grab hook into chain and idler in front of tire.

5. Center rubber pads evenly over top of tire. The rubber pad ribs must inset into the tread.

6. Hook 2nd idler behind tire.

7. Remove excess strap and hook stationary hook into decking.

8. Tighten strap --- Snug with 24" winch bar. Always pull --- Never push

9. Secure excess chain Example (1) Using Idlers Example (2) Using Bungee

10. Driver is responsible for load quality and company Safety procedures.