B.COM Unit – 4 ( CORPORATE SOCIAL RESPONSIBILITY ( CSR ).pptx
Weekly report deed
1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] March 1, 2012
Name-Surname NattakanTechawanichaval
Student ID. 53211809
Group Name KID-WACompany
Pop 53211803 Care 53211821
Engineering Team Ple 53211805Wijak 53211827
Members Pete 53211812 Lek 53211834
Fond 53211818
Product Design
P’GongP’TongP’JoyP’Aru
Team Members
Weekly Progress
Last week I talked with my group about our project. At morning we summed up our project for
present at afternoon. We had found the information and we had found the method of our product
such that The first step is The barcode scanner scan the barcode and then send the code to the MCU
and compare with the data base in the memory and then show the information in the memory on
the screen. And after we presented the project to a teacher, out team had thought that we should
change the method of scanning into RFID because the barcode scan may be too busy to use for
example you have to put the item closed in front of the barcode scanner but if we use RFID you just
take the item into the refrigerator,that's all. So we find the information about RFID to use in our
project.
Figure 1.RFID
Engineering Analysis
Strong Point
- we use high technology so it's interesting to use the product.
-our product is easy to use.
-our team have an ability to make the product.
Week Point
- The RFID is quite new for me so we have to work hard to make this.
- The period may be too least for doing this.
Next Week Job
-Next week, we will present work progress.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] March 1, 2012
Name-Surname NattakanTechawanichaval
Student ID. 53211809
Group Name KID-WACompany
Pop 53211803 Care 53211821
Engineering Team Ple 53211805Wijak 53211827
Members Pete 53211812 Lek 53211834
Fond 53211818
Product Design
P’GongP’TongP’JoyP’Aru
Team Members
Weekly Progress
Last week I talked with my group about our project. At morning we summed up our project for
present at afternoon. We had found the information and we had found the method of our product
such that The first step is The barcode scanner scan the barcode and then send the code to the MCU
and compare with the data base in the memory and then show the information in the memory on
the screen. And after we presented the project to a teacher, out team had thought that we should
change the method of scanning into RFID because the barcode scan may be too busy to use for
example you have to put the item closed in front of the barcode scanner but if we use RFID you just
take the item into the refrigerator,that's all. So we find the information about RFID to use in our
project.
Figure 1.RFID
Engineering Analysis
Strong Point
- we use high technology so it's interesting to use the product.
-our product is easy to use.
-our team have an ability to make the product.
Week Point
- The RFID is quite new for me so we have to work hard to make this.
- The period may be too least for doing this.
Next Week Job
-Next week, we will present work progress.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/weeklyreport-deed-120307030714-phpapp02/85/Weekly-report-deed-1-320.jpg)
