Call Girls Pune Just Call 9907093804 Top Class Call Girl Service Available
Jen Crouch Portfolio
1. jen
CROUCH DESIGNS
2950 Clairemont Dr Apt 13
San Diego, CA 92117
Crouch.JL@gmail.com
619.405.9807
2. JENNIFER 2950 Clairemont Dr Apt 13 San Diego, CA 92117
CROUCH 619.405.9807 Crouch.JL@gmail.com
PERSONAL STATEMENT
Talented graphic designer with over seven years experience in marketing,
sales, and technical writing seeking employment in a creative field. Primary
goals are to work in a capacity to develop marketing strategies and business
plans to increase sales, design innovative artwork that demonstrates a
cohesive business model and value to customers, utilize organizational
“ skills to effectively manage multiple projects and complete tasks in a timely
...worked well manner, while building great customer and work relationships.
under tight time PROFESSIONAL EXPERIENCE
Graphic Artist / Technical Writer
constraints, and DeepSea Power & Light March 2004 to November 2008
was unphased Designed and created over 100 marketing items, including advertisements,
brochures, E-newsletters, posters, postcards; Managed and updated 2
when a project websites; Wrote and edited over 30 user manuals, product releases,
specification sheets; Photographed more than 40 products and edited for
required multiple print and web applications.
Accomplishments
sign-offs and Promoted within the company 3 times as a result of being
proactive and exceeding delegated assignments.
incremental
“
Formulated a re-branding initiative, resulting in a unified style
changes. guide and cohesive marketing scheme.
Marketing coordinator of multiple product launches leading to a
-Kevin Hardy, VP yearly increase in sales of 30+%.
Marketing
Assistant Sales Manager
New York & Company January 2001 to August 2003
Managed and trained a twenty+ person sales team; Designed and
implemented 10 new performance tasks to improve sales and customer
service levels.
Accomplishments
Surpassed sales goals by at least 10% on a consistent basis.
Customer service skills received 100% on secret shopper report.
Supervision of floor led to exceeding loss prevention goals by 20%.
COMPUTER KNOWLEDGE
Adobe Photoshop, Illustrator, InDesign, Dreamweaver
CorelDRAW
Microsoft Office (Word, Excel, Powerpoint, Outlook)
EDUCATION
Bachelor of Fine Arts, Film and Television
Chapman University August 2000 to January 2004
Accomplishments
Graduated Magna Cum Laude with a 3.84 GPA.
Member of Gamma Beta Phi Honor Society and Alpha Phi Sorority.
Samples of work and references available upon request.
3. Let the Thru-Hull SeaLite® extend
your boating fun into the night
•Night Fishing
•Night Diving
•Night Entertainment
•Night Photography
Competition
See the clear difference
At Walker’s Cay across the
dock from each other
Thru-Hull SeaLite®
DeepSea Power & Light® has over 25 years of
experience designing and manufacturing industrial
lighting fixtures for deep ocean exploration, at
depths exceeding 20,000 feet. DeepSea’s lights
have been used by oceanographic researchers,
military branches, commercial divers, and even to
illuminate the wreck during the filming of James
Cameron’s “Titanic.”
DeepSea uses only legitimate photos in their
marketing material, and accurate figures in their
light specs. We see and hear some pretty amazing
claims, but at the end of the day it comes down
to offering you maximum light penetration in
seawater, a rugged design, and the peace of mind
knowing that you have a safe light on your boat.
The difference is quality, and it’s in the details.
®
®
4033 Ruffin Rd San Diego,CA 92123-1817
Phone (858) 576-1261 Fax (858) 576-0219
www.deepsee.com
4. THRU-HULL SEALITE ® You won’t find a better thru-hull light!
THRU-HULL SEALITE
Serviceable from Inside the Boat
Changing lamps is a simple 5 minute job
HID-X
150W, 110/220VAC
HID-S and -O models Water Tight Fitting
Sealed front and back
also available High Color Temperature Lamp
For maximum penetration in sea water
LED Lights
(18 LED and MiniLED)
Gas Discharge Lamp
No filament to break
18 LED Sapphire Crystal Port
One of the hardest and most thermally
9-32VDC conductive transparent materials
Serviceable from Inside the Boat
Effective and Efficient Reflector
Allows access to LEDs and drivers
Color options: Ensures a wide beam angle and maximum use of light
White, Green or Blue Temperature Compensating Circuitry
Allows for in-air operation
Gas Discharge
Lights High Brightness
Maximum penetration in sea water
(HID and Xenon)
WWW.DEEPSEE.COM
50,000 Hour LED Life
No bulb changing required
Xenon
35W, 8-32VDC Thermally Coupled Design
Ensures longevity of LED
Individual LED Reflectors
Distribute light for maximum effect
MiniLED
9-32VDC HID LED XENON MINILED
110VAC or 220VAC 9-32VDC 8-32VDC 9-32VDC
Color options: Power
White, Green or Blue 3.5” 3.0” 2.375” 1.25”
Thru-Hull Size
316SS or Titanium 316SS 316SS 316SS
Thru-Hull Material
Features • Sapphire crystal • High performance • Sapphire crystal • High performance
window Polymer window window Polymer window
• Wide beam angle • Color options: • Wide beam angle • Color options:
Camera • Leak intrusion White, Green or Blue • Fully sealed design White, Green or Blue
12/24VDC, Color detection (X model) • Ultra long life • Ultra long life
• Over temperature (50,000+ hours) (50,000+ hours)
Fixed focus detection (X model) • Integrated driver • Integrated driver
®
Wide angle • UL Recognized board board
• Fully sealed design • Fully sealed design • Fully sealed design
5.
6.
7.
8.
9.
10.
11. DEEPSEA POWER & LIGHT
FOR IMMEDIATE RELEASE
CONTACT: JENNIFER CROUCH
(858) 576-1261 x393
DeepSea Introduces an Innovative New LED Thru-Hull SeaLite®
San Diego, CA - For decades DeepSea Power & Light (DeepSea) has been
designing innovative underwater products that exceed industry standards. The
LED Thru-Hull SeaLite® is the next evolution of the proven Thru-Hull SeaLite®
product line. This new thru-hull lighting system uses the latest LED technology
to create a fixture that offers amazing light output, is extremely rugged and most
importantly, safe.
Boat owners enjoy using the Thru-Hull SeaLites® as attractive mood lighting
while at the dock or functionally to aid in nighttime fishing, diving and
photography. DeepSea’s LED Thru-Hull SeaLite® features 18 high color
temperature LEDs, each with its own reflector to distribute the light for
maximum effect. The result is a wide, even dispersion of light that is pleasing to
the eye.
The 316 stainless steel housing was engineered with two double seals,
ensuring that the LED Thru-Hull SeaLite® will remain watertight, even in the
harshest environments. With the LED driver board integrated into the watertight
housing, installation is trouble-free; simply run the power cable from the back of
the light to your power source. In addition, thermal compensation circuitry
regulates the temperature of the LEDs, improving the life of the LEDs and
allowing the light to be run in air. Unlike other LED lights on the market,
DeepSea’s LED Thru-Hull SeaLite® is serviceable from inside the boat. But,
with a 50,000 hour life, the unit requires no bulb maintenance.
DeepSea Power & Light’s underwater products are used daily in the most
demanding environments on the planet. The LED Thru-Hull SeaLite® provides
the peace of mind in knowing that it was designed by a company with 24 years
expertise as a leading manufacturer of underwater lights for deep diving
submersibles, offshore oil and commercial divers. For more information, please
visit www.deepsee.com or call 858-576-1261. Thru-Hull SeaLites® - whiter,
brighter and more durable.
###
DeepSea Power & Light
4033 Ruffin Road
San Diego, CA 92123-1817
4033 Ruffin Rd.
(858) 576-1261
San Diego, CA
92123-1817
(858) 576-1261
Fax: (858)576-0219
www.deepsea.com
www.deepsee.com
12.
13. 18LED Thru-Hull SeaLite®
The 18 LED Thru-Hull SeaLite® is the next evolution of the proven Thru-Hull
SeaLite® design.
Several features come together in the 18 LED Thru-Hull SeaLite® to create a
light that offers amazing light output, is extremely rugged and most importantly,
safe. There are 18 high color temperature LEDs, each with its own reflector to
distribute the light for maximum effect. Thermal compensation circuitry regulates
the temperature of the LEDs, improving the life of the LEDs and allowing the light
to be run in air. The 316 stainless steel housing has two double seals, ensuring
that the 18 LED Thru-Hull SeaLite® will remain watertight, even in the harshest
environments. To simplify installation, the driver board is integrated into the
watertight housing. The 18 LED Thru-Hull SeaLite® is even serviceable from
inside the boat. And, with an ultra long life, the 18 LED Thru-Hull SeaLite®
requires no bulb maintenance!
The 18 LED Thru-Hull SeaLite® provides the peace of mind in knowing that it
was designed by a company with over 25 years expertise as a leading
manufacturer of underwater lights for deep diving submersibles, offshore oil and
commercial divers.
Light Specifications
MECHANICAL
Housing Material: 316L Stainless Steel
Pressure Tested To: 100 PSI
Size:
Length: 8.73 in. (22.17 cm)
Diameter:
Thru-Hull Fitting: 2.95 in. (7.49 cm)
Outer Flange (1/4 in. thick): 5.0 in. (12.70 cm)
Weight: 7.00 lb. (3.18 kg)
Lens: High performance polymer
Cable Length: 15’ (4.57 m) standard (longer available on
request)
Recommended Hull Thickness:
Minimum: 1/4 in. (6.35 mm)
Maximum: 5.0 in. (12.70 cm)
LAMP
Type: LED
Rated Average Life: 50,000 hours
Color Temperature: 5,700-6,700º K (Cool white, green and blue)
Actual Lumens (in water): 2,000 (white version)
Beam Angle: 17º center spot within 90º flood
OPERATING
Warm Up / Re-strike Time Instantaneous
Minimum Operating Temperature: -22° F (-30° C)
ELECTRICAL
Input Voltage: 9-32 VDC
Input Current: 4.3A at 12V
Wattage: 52 Watts
Specifications subject to change without notice
DEEPSEA POWER & LIGHT • 4033 Ruffin Rd. • San Diego, CA 92123 USA • TEL (858) 576-1261 • FAX (858) 576-0219
Web: www.deepsee.com • E-mail: THSL_sales@deepsea.com
Rev. 09/05/08
14.
15.
16.
17.
18.
19. ®
®
LED Multi-SeaLite
LED Multi-SeaLite
The revolutionary LED Multi-SeaLite® from DeepSea Power & Light
will change the way you look at underwater lighting. Gone are the days
of downtime caused by lamp changes. LED Multi-SeaLites® have a
50,000 hour lifespan, and are incredibly shock and vibration resistant.
The LED Multi-SeaLite’s® high color temperature white LEDs, variety of
monochromatic colored LEDs, and state of the art reflectors give you the
BH3MP
BH3MP M
ability to put light where you need it, reducing the amount of wasted light (1=Hot, 2=Neutral, 3=Ground to shell)
that is often experienced as backscatter. DeepSea’s proprietary driver
circuitry and high efficiency LEDs combine to create a light that produces
over five times more light per watt than halogen lamps. To top it all off, you
can easily convert your current suite of Midwater or Deep Multi-SeaLites® to
LED Multi-SeaLites®, using the same bodies, mounts, and connectors that
you keep in your spares kit.
XSG3BCL
XSG3BCL
GB
(1=Ground, 2=Hot, 3=Neutral)
Mechanical
Body Material Hard Anodized Aluminum (6061)
Window Material Acrylic GENERAL NOTES & WARNINGS
1. You may run your LED Multi-SeaLite® in air. As the light heats up you will notice 3. Do not tamper with the split retaining ring that holds the front window. The front
Mounts High Strength Plastic Mounting Collar
that the output will diminish. This is normal, and the light will come back up to full window requires a press to install the split retaining ring, and it is very hard to
(Standard) brightness once it is submerged and allowed to cool. reinstall. Tampering with the lighthead in any way may damage the light and
2. !DANGER! When the LED Multi-SeaLite® is operated in air, the body may will void your warranty.
Stainless Steel Yoke Mount and Helmet reach temperatures in excess of 65°C. These temperatures may be enough 4. !DANGER! Do not operate any high voltage electrical equipment in or around
to cause burns if the light is handled without protective clothing. water without using a Ground Fault Interrupt circuit (GFI) and an isolation
1503
15030
Mounting Bracket (Optional)
transformer, especially when divers are in the water.
(1=Hot, 2=Neutral, 3=Ground to shell)
o, eu a , 3 G ou d o s e )
u
Air Weight 896 g (31.6 oz)
PRE & POST DIVE INSPECTION
Water Weight (salt water) 420 g (14.8 oz)
1. Rinse your LED Multi-SeaLite® in fresh water after use in saltwater. !DANGER! After each deployment, carefully check to make sure the light has not
Implodible Volume 57 cc (3.5 cubic in.) flooded. It is possible for the light to partially flood and then reseal itself while
2. Always check to make sure that the rear bulkhead connector assembly is secure underwater. Upon surfacing, the light can become internally pressurized, which may
before deployment. be potentially dangerous. Additionally, if the power remains on when the light has
Environmental partially flooded, it is possible for electrolytic generation of an explosive mixture of
LPBH3MP
LPBH3MP
B3 3. Before and after each deployment, check the following areas for damage, wear or hydrogen and oxygen gases. If a light appears flooded upon removal from the
Depth Rating 6,000 m (20,000 ft)
corrosion: Rear bulkhead connector assembly, power cable, front window, water, it should be treated as potentially dangerous. Point the light away from
(1=Hot, 2=Neutral, 3=Ground to shell)
retaining cowl. persons and valuable equipment, and make sure that the power is discon-
Test Pressure 10,000 psi
nected. See the Flooded Light Repair procedure for more information.
Crush Depth* 9,700 m (14,500 psi)
Min/ Max Op. Temperature -10ºC to 40ºC (14ºF to 104ºF) TROUBLE-SHOOTING
Flooded Light Repair: Troubleshooting:
Optical If the light stops working while underwater, you should assume that it has been 1. If the light stops working while underwater assume that it has been flooded. See
Mount Drawing
Mount Drawing
t rw flooded. When working on a potentially flooded light, it is important to use appropriate Flooded Light Repair procedure.
Colors White, Blue, and Green personal protective equipment to include, at a minimum, eye and hand protection. 2. Once it has been determined that the light is not flooded, or if it does not turn on
during pre-deployment checks, troubleshoot in the following sequence:
Lumens in the Water** 2,400 lm to 2,800 lm (white only) 1. Place the light face down on a table making sure that the connector side is a. Check the power cable/inline connector to make sure that correct
facing up. voltage and current are being supplied, and that the correct sockets are
Color Temperature 5,000ºK to 7000ºK 2. Slowly unscrew the connector socket assembly to allow any internal pressure to being used. See the back of this manual for electrical specs and connec tor
be equalized. pinouts.
Dominant Wave Length*** White: n/a, Blue: 475nm, Green: 525nm 3. Once it is determined that the light is not internally pressurized it is recommended b. Remove the connector/socket assembly (see step 1 in the Disassembly
that the light be returned to DeepSea Power & Light (DSPL) for evaluation and procedure). Inspect the assembly for visual signs of wear. Using a multi-
Beam Pattern Medium 30º repair using the RMA Procedure. meter, check for continuity or shorts in the connector. Try a spare
4. In case of emergency, you may attempt to repair the flooded light by following the connector/socket assembly if available.
steps listed in the Disassembly, Inspection and Assembly procedures. Any parts c. Disassemble the rest of the light using the Disassembly procedure (steps 2
Electrical that were exposed to saltwater should be cleaned with de-ionized water to through 7).
remove any salt residue before reassembly. Make sure that all parts are d. Check the wires that go from the driver board to the lamp base for wear. If
Input Voltage 85-135vAC (100-180vDC), 185-265vAC
completely dry before reassembly by baking them in an oven at 140°F for 30 they appear worn, replace the driver board.
minutes. e. Check to make sure that the driver board is securely attached to the light-
Input Current 550 mA (typ.) at 120vAC
head. If it is loose, check for damage on the board. If there appears to be
!IMPORTANT! DeepSea Power & Light cannot be responsible for any damage no damage, reattach the driver to the lighthead (see step 3 in the
LED Lifespan 50,000 hours
incurred during emergency field repairs. Such repairs should be undertaken Assembly procedure). Try using a spare driver board if available.
only as a last resort and by qualified personnel. f. If the light still does not work, return it to DSPL using the RMA Procedure.
True Power 44w
Power Factor 0.66
* Crush depth based on one sample only. 4033 Ruffin Road, San Diego, CA 92123-1817
** True amount of light leaving the fixture, measured in lumens with a calibrated integrating sphere. (Calibration
(858) 576-1261 Fax: (858) 576-0219
traceable to NIST)
®
Web: www.deepsea.com Email: info@deepsea.com
*** Dominant wavelength of monochromatic light.
****Product specifications subject to change without notice. Rev. A. 11.19.08
Rev. 11/19/08
20. ®
LED Multi-SeaLite
ASSEMBLY & DISASSEMBLY
Disassembly:
4. Inspect the light body to make sure that it is clean, and that the sealing surfaces
1. Before working on your LED Multi-SeaLite®, be sure that you have a clean, dry,
on the front and back are smooth and free of scratches or rough spots. Check the
flat work area available.
entire body for evidence of corrosion.
2. Unscrew the connector/socket assembly from the back of the light body using
5. Inspect the retaining cowl for cracks or chips.
your hand or a 13⁄8” wrench. Gently pull the connector/socket assembly away
from the light body and unscrew the lamp base (the thing with wires running to
6. Inspect the connector/socket assembly for wear. Clean the o-ring groove with a
it) from the socket in the connector/socket assembly. Remove the o-ring (2-213
lint free wipe and reagent grade alcohol. This is also a good time to check the
NO674-70) from the connector/socket assembly. Place all items in a clean, dry
continuity of the connector/socket assembly.
place.
7. If any of the above parts show signs of wear or damage they should be replaced.
3. Unscrew the retaining cowl using a large size spanner wrench to hold the cowl
If there appears to be anything wrong with the lighthead, it should be returned to
and a small size spanner wrench to hold the light body.
DSPL for evaluation and repair using the RMA procedure.
4. Optional: If you wish to remove the retaining cowl and locking ring, do so before
separating the lighthead from the body. Once the retaining cowl is loosened, Assembly:
retighten it so that it is just hand tight. This gives the locking ring some resistance 1. If you removed the mounting collar from the light body, reinstall the rubber
to hold it out of the way during removal of the retaining cowl. Using a small allen mounting collar ring first, making sure that the rounded corner of the ring is on
wrench or screwdriver, press in on the locking ring rthrough the small sight holes the outside and facing the rear of the body. Place the light body face down on a
in the retaining cowl. Work your way around the cowl until the locking ring has flat surface. Loosen or remove the allen head screw in the collar. Place the collar
bottomed out in the groove in the lighthead. Pull the lighthead directly away from over the light body making sure that the ridge on the inside edge of the collar is on
the body and cowl to separate it. This process may need to be repeated several top. Press firmly on the collar until it is seated over the rubber mounting ring.
times before the lighthead releases. This process takes some practice, and care Tighten the allen head screw.
should be taken not to damage or force any of the parts.
2. Place the lighthead/driver assembly face down on the flat surface.
5. Carefully separate the lighthead from the body, making sure that the lamp base
passes through the connector/socket assembly hole. The retaining cowl will 3. If you separated the driver board from the lighthead, reinstall the driver board by
remain connected to the lighthead, if you have not removed it already. plugging the green connector back into the driver board. Make sure that the
Silpad is sitting on top of the FET (black, D shaped component on the driver
6. Remove the o-ring (2-037-NO674-70) from the back side of the lighthead. Place board), and that it contacts the lighthead body when the driver board is seated.
in a clean dry place. Reinstall the four screws, shoulder washers and spacers that hold the board to
the light engine.
7. IMPORTANT! Do not attempt to open up the lighthead or remove the split
retaining ring on the front window of the lighthead. The front window 4. If you removed the retaining cowl and locking ring, reinstall them by compress- Parts List
requires a press to install the split retaining ring, and it is very hard to ing the locking ring in the groove in the lighthead with your hand while lowering
Body
reinstall. Tampering with the lightehead in any way may damage the light the retaining cowl onto the lighthead.
and void your warranty. 712-012-010-0A-02 LML 6061 Aluminum body
5. Lubricate the o-ring (2-037-NO674-70) with Dow 111 and place it into the groove
8. Optional: If you wish to replace the driver board, remove it by unscrewing the four in the back of the lighthead. Cowl
screws that hold it to the light engine. Carefully unplug the green connector that
712-012-012-0A LML Ultem plastic cowl
attaches the lighthead to the driver board. Place all parts in a clean dry place. 6. Lower the body onto the lighthead and fish the lamp base through the hole where
the connector/socket aseembly will go using tweezers or needle-nose pliers.
Mounts
9. Optional: If you wish to remove the mounting collar, unscrew the allen head
screw at the top of the collar. With your thumbs on the rear of the light body and 7. Tighten the retaining cowl, first by hand, and then using the spanner wrenches, 710-040-019-0C Delrin mounting collar 774-000-013-0A Universal helmet mounting bracket
your fingers on the collar, pull back on the collar while you push on the light until it feels snug and no threads remain visible. Be careful not to cross thread
774-000-016-0A Yoke mounting bracket 774-000-014-0A Universal hand grip
body. It may take considerable force to remove the collar. Once the collar has the cowl. Look through the larger sight holes in teh retaining cowl to make sure
been removed, remove the rubber mounting ring. the lighthead and body are in contact all the way around.
O-Ring Kits
8. Lubricate and reinstall the o-ring (2-213-NO674-70) into the groove in the
Inspection: 712-012-603-0A O-ring kit 710-04106-0A Sealing ring (not included in LML-OR)
connector/socket assembly.
1. Inspect all o-rings to make sure that there are no nicks or cuts present, and
Lighthead
that they are still supple and flexible. Clean with a lint free wipe and reagent grade
9. Screw the lamp base into the socket in the connector/socket assembly. Rotate the
alcohol. 712-012-151-0A-01 Lighthead, 18Cree, white, flood 712-012-151-0A-04 Lighthead, 18Cree, white, spot
connector/socket assembly three full revolutions in a counterclockwise direction to
preload the wires that connect the lamp base to the driver board. Screw the
2. !WARNING! The front window of the lighthead is made of acrylic plastic and will 712-012-151-0A-02 Lighthead, 18Cree, blue, flood 712-012-151-0A-05 Lighthead, 18Cree, blue, spot
connector/socket assembly into the back of the light body until hand tight.
cloud and craze if exposed the alcohol. Do not clean any part of the lighthead
712-012-151-0A-03 Lighthead, 18Cree, green, flood 712-012-151-0A-06 Lighthead, 18Cree, green, spot
with any type of alcohol.
10. It is recommended that the light be pressure tested once reassembled. If
Driver
pressure testing facilities are not available, soak the light in clean, fresh water for
3. Clean the o-ring groove on the back of the lighthead with a lint free wipe. Check
several hours to insure that the light is sealed.
the wires that connect the lamp base to the driver board for nicks or wear. 712-012-902-0A-06 120V driver circuit board assembly
Bulkhead Connector
705-00014-0B BH3MP connector/socket assembly with 705-00053-0B XSG3BCL connector/socket assembly
female locking sleeve
RMA PROCEDURE 705-00048-0A LPBH3M connector/socket assembly 705-00069-0A 5507-1503 connector/socket assembly
140-00031 Female Delrin locking sleeve for bulkhead 140-00032 Male Delrin locking sleeve for
For warranty and non-warranty repairs please contact DeepSea Power & Light for an RMA contact information:
RMA number before shipping your item. Please have your light model number, serial Phone: 858-576-1261 ext. 324 connector with snap ring mating connector with snap ring
number and any other pertinent information along with a description of the problem Fax: 858-576-0219
In-Line Connector
at hand when you call, or include them in a fax or email. When shipping your item, be Email: RMA@deepsea.com
sure that the freight is pre-paid (CODs will not be received) and that the RMA number 706-000-022-0A-0002 Mating connector for BH3MP on 18” (0.5m) 140-00094 Mating connector for LPBH3MP on 18”
is clearly printed on the outside of the box. All shipments should be sent to:
whip with male locking sleeve, supercedes (0.5m) whip
DeepSea Power & Light
p/n 140-00062
Attn: RMA #XXXX
4033 Ruffin Rd. 140-00112 Mating connector for XSG3BCL with female 140-00196 Mating connector for 5507-1503 CCP on
San Diego, CA 92123-1817
locking sleeve on 18” (0.5m) whip 18” (0.5m) whip