1. June 10, 2016
Jacob T. Ralston
380 Antrim Main St.
Antrim PA, 16901
Dear who it may concern:
I have 3 and half years of experience in electrical maintenance as well as PLC
programming and machine fabrication at Superior Tire & Rubber Corporation. My
supervisor sent me to Red Lion with the Automation supervisor, Joe Tomassoni, for PLC
training in York, Pa. For the first six months I was at this job I ran two different cnc
machines, Mori Seiki SL-35 and SL-303, which I learned how to manipulate through
making small changes to the programs. This company is a large company employing
over 250+ employees. I am ready for any overtime or assistances needed to do a stellar
job in a position with your company.
My resume is attached for your resources. Thank you for taking the time to review
my resume I am looking forward to hearing from you to schedule an interview.
Thanks,
Jacob T. Ralston

2. 1
June 10, 2016
Jacob T. Ralston
380 Antrim Main St. Antrim, PA 16901 1(814)779-3152 bubbaralston1988@gmail.com
Objective
I'm relocating to the Wellsboro, Pa area and looking for
employment, I’m willing to commute.
While I was attending Triangle Tech in Erie for my associate
degree in Maintenance Electricity. I worked 2 years part time and 2
years full time. There I learned how to do orders on glass, cut glass,
remove and install windshields, remove and install new vestibules, and
I also learned the quote/estimating of different jobs from residential to
auto glass.
I'm a certified electrician with an associate’s degree with three
and a half years of experience in electrical maintenance in an industrial
setting. I am very focused on my electrical abilities. I believe I would be
a strong candidate. I also have strong abilities in troubleshooting and
repairing different electrical and mechanical components and
machines, including the mechanical aspects. I also have a strong
background with I/O plc's and HMI based plc's.
I have two years of auto mechanics at Whitehill’s garage in
Pleasantville, PA. First off I want to mention that I grew up with only my
Dad learning about how things work and the mechanical end of
different things. I can fix anything from brakes and wheel bearings to

3. 2
replacing a transmission or engine. I am also familiar with the intake
and timing components. I am willing to obtain my Inspection License.
Education
 Triangle Tech, Erie, PA
 Associates Degree graduated in 2009
 Maintenance electricity and PLC’s
 West Forest high school, Tionesta, PA
 High school diploma
Experience
Sept. 2007 - Oct> 2010
Glazer | ABC Glass | Erie, PA
In this profession I was to remove and reinstall windows and vestibules anywhere from
residential to industrial buildings to all glass windows in vehicles. While I was here I was mainly
the auto glass technician. I did most of my work solo. I’ve learned how to do windshields, back-
glass, quarter glass, side mirrors, re-glue rearview mirrors, fix chips, window regulators, and
tempered side glass in a neat and timely fashion. For about a year before I left ABC Glass I was
doing estimates.
Nov. 2010 – Nov. 2014
Maintenance Technician Level II | Superior Tire & Rubber | Warren PA
While being a maintenance technician at this facility I've worked on several CNC
machines anything from the electrical aspect to the mechanical aspect. I also do a lot of
communication wiring with Cat 5e cable. The reason I've been involved with networking and
communication because I've been using PLC's to take information to a central server hub so
engineers and other supervisors can see what the operators are doing remotely from their
computers, keeping the operators accountable. I've also built a machine for deflecting caster
assemblies. This was a QC testing machine to keep the product in spec. with the consumer. In
building this machine it was comprise of welding and fabrication, wiring, programming the plc and
running a small hydraulic system. I've ran smaller sized conduit and wired in new machines that
have been set in this facility. I was responsible for establishing and maintaining software for the
maintenance dept. that’s called Manager Plus Pro. It’s software that’s used for preventative
maintenance routine checkups and repairs. I’ve also done a lot of mechanical repairs on
machines. I’ve had to repair plumbing, communication components, mechanical parts, and most
of all electrical components. I work on motor starters, contactors, and safety circuits. I work with

4. 3
different sensors from thermo couplers, measurement sensors, encoders, pressure relief valves,
and load cells. I can also read and draw small blueprints for control cabinets. I have a little bit of
knowledge with Solid Works Electrical software. I have an up to date CPR certification. I’m very
familiar and used regularly, the standardized lock-out tag-out procedure.
Nov. 2014 – Nov. Present
Auto Technician | Whitehill’s Garage | Pleasantville PA
In this position with Whitehill’s Garage I am able to perform routine maintenance on every
make and model of vehicles. I do any kind of work from brake lining to repairing motors or
removing and reinstalling new transmissions and motors. I am one of three people and we have
lots of work. I also would repair wiring, light sockets, body work and fabrication, and diagnosing
cars with a scan tool. A scan tool reads the computer on the vehicle and you could pinpoint the
problem or make an accurate diagnosis from the information (codes) that it told you. You could
also get real time data from the scan tool that would give you RPM’s, temperature, and etc. I have
used scanners such as Autel and Genysis. I’ve used computer programs such as Identifix and
ALLData.

5. 4
References:
 ABC Glass
Owner Scott Novosel
Phone: 1(814)566-1560
 Superior Tire & Rubber
VP of manufacturing Paul Blasco
Phone: 1(814)706-3703
 Superior Tire & Rubber
2nd
shift facility supervisor Milton Davidson
Phone: 1(814)779-3488
 Whitehill’s Garage
Owner Mark Whitehill
Phone: 1(814)589-7431