1. Moving toy Process Journal
Drawing, Measuring Cutting the shape of sea
Picture of wearing safety Picture of measuring distances of my
Picture of cutting wood
coat toy.
20/9/2011
What you did: Today I was really busy, I needed to draw, measure, and cut. First, I wore
safety coat. Second, I drew my toy. It was really hard draw sea so I got help from teacher.
Third, I measured distances and drew sea again on the another side of wood. Finally, I cut
my wood. It was difficult to use coping saw. It was my first time using coping saw, because
last year I didn’t make round shapes. I needed to cut many spaces, and the spaces were
really small so it was kind of hard to cut.
Emotion: I was really happy to make toy for kids. Also, I was concerned about I can make
this toy well or not.
AOI: I chose environment, because I need to save wood so I don’y have to pollute nature.
What next: I have to cut all unnecessary spaces, I have to make tree for my toy.
Learner profile: I’m a thinker, because I was thinking how to draw sea and how I cut this sea
shape.
Why: I liked to cut the wood, because I liked the sound of cutting and feel of cutting the
wood.

2. Cutting the shape of sea
Picture of wearing safety apron Picture of cutting wood by
using using coping saw
22/9/2011
What I did: I was cutting wood again. It was really hard to cut the wood that shape is sea.
There were many curved lines so I needed to cut many spaces. It was kind of difficult to cut
outside of curved lines. I was trying hard to cut outside of curved lines, but sometimes I cut
lines. I just used coping saw, because I only cut the wood.
Emotion: I was little bit sad that I couldn’t finish one shape. I will try to cut one shape in one
day. I was happy to make difficult shape, because next time I can know what tool I need to
use.
AOI: AOI is environment, because I’m using wood and wood is part of nature.
What next: I have to finish cutting the shape of sea. Then I need to find long round shape to
make tree. I have to cut the shape of sea as quick as I can so I can go to next step.
Learner profile: Learner profile is thinker, because I’m thinking which side of angle will be
good to cut curved lines. Also, I think I’m a risk taker, because I want to try new tool to
make toy.
Why: I liked to cut many things, but I hate to cut curved lines. There are many reasons why
I hate to cut curved lines. First, It’s hard to cut curved lines. Second, if I cut the wood in not
good angle, I need to cut the shape again. Lastly, when I cut curved lines, I need to use
coping saw to cut

3. Using disk sander, and using half round files
Picture of using half round files to Picture of using disk sander to Picture of cutting my shape of
make my shape round make my wood round, and sea
smooth
26/9/2011
What you did: Today I was doing many things. First, I was cutting my
shape of sea. It was hard to cut curved lines, but I did it. Second, I used
disk sander to make my shape equal. It was kind of hard to make equal
so I had to work on for like 15 minutes. Lastly, it was kind of hard to use
half round files. It was hard to use that, because it was not really getting
smooth, and getting equal. Also, I forgot write it, I wore safety goggles
when I was using disk sander, because wood pieces can go to my eyes.
Emotion: I was really happy that I did many things in one day.
AOI: AOI is environment, because I’m trying to save wood so that I’m not
wasting wood.
What next: I have to make my island equal, and round. Then I have to
make tree shape. I think it will be really hard to make it, but I will try to
make tree shape.
Learner profile: I think I am risk taker, because I’m trying new things.
Also, I think I am thinker, because I’m thinking about which angle will be
good to cut wood.
Why: I liked to use disk sander, it’s dangerous machine so I had to be
careful. I hate to use half round files, but I had to use for making my toy
round, and smooth. Even if I hate to use some tool, I will try to make my
toy the best in our class.

4. Filing my shape of the
island
27/9/2011
What you did: I was filling wood whole time. It was really hard to file my
wood, because there were some cut part. It was kind of hard to good
mark from a teacher. I was trying my best to file my wood. I don’t know
why I was filing my wood whole time. I used half round files to file my
wood.
Emotion: I was sad that I couldn’t finish filling my wood. However, I was
happy that I’m doing next step next time.
AOI: AOI is environment, because I’m trying my best to save wood so
I’m not destroying environment.
Learner profile: I think I am risk taker, because I’m trying new things that
I haven’t done before.
What next: I need to get new wood, and make wood shape. I think it will
be one of the hardest thing in my toy.
Why: I liked when I was cutting or disk sanding, but I was really tired
when I was filling whole time. I think I need to be better at filling wood.
Picture of filling wood Picture of wearing apron

5. Using trimmer router to
make edges of toy round
29/9/2011
What you did: I was filing my wood first, and I used trimmer router to
make my toy round. It was kind of hard to use trimmer router, because if
I press so hard, black thing will come out. I needed to get teacher’s
permission to use the trimmer router. Also, I had to wear safety goggles
to make my eyes safe.
Emotion: I was happy that I used new tool. It was kind of nervous to use,
but I was happy to use trimmer router.
AOI: AOI is environment, because I’m trying to save wood by not making
many mistakes.
Learner profile: Learner profile is risk taker, because I used new tool that
name is trimmer router.
What next: I need to file my wood again to make my wood smooth, then
I need to draw circle on my wood.
Why: I was really nervous about using trimmer router, but when I was
using that I got really fun of using trimer router. I want to use that tool
again.
Picture of filing wood
Picture of using trimmer router

6. Using half round files and
sand paper to make my toy
edges round
10/10/2011
What you did: Today I was just using half round files and sand paper to
make my toy round and soft. I was just using sand paper about 1hour. It
was really hard to make my toy round and soft. It was really hard to get
good mark from a teacher. So I had to sand and sand for long time. I
was really angry, when I need to sand again.
Emotion: I was tired, because I need to sand my toy about 1 hour.
AOI: AOI is environment, because I’m trying save wood to not harm the
nature.
Learner profile: Learner profile is risk taker, because I’m trying new
things. Also, I think I am think, because I am thinking which place
needed to be filed.
What next: I need sand more and I need measure and mark out for tree
shape.
Why: I was really angry when I need to sand for 1 hour. I was really tired
of sanding my toy.
Picture of filing wood Picture of wearing apron

7. ! Sanding my base by
using garnet paper
12/10/2011
What you did: Today I was keep sanding my wood. I was really tired of
sanding my wood. I was keep sanding my wood, because I needed to
make my wood not sharp, and smooth. I used garnet paper to make my
wood smooth.
Emotion: I was tired of sanding my base. I think I need to improve to
finish sanding my wood.
AOI: AOI is environment, because I’m trying save wood to not harm the
nature.
Learner profile: Learner profile is thinker, because I am thinking which
angle will be good to sand.
What next: I need to find wood that is good for make tree.
Why: I liked when I was sanding my wood for 10 minutes, but I was
getting tired when I was sanding my wood for 1 hour. I was really tired of
sanding my wood.
!
Picture of using sand block
Picture of wearing apron

8. Measuring and mark out
wood for tree shape
15/10/2011
What you did: I found new wood to measure and mark out wood for tree
shape. It was hard to make 2 parts same. I was trying my best to
measure and mark out my wood for tree shape. When I finished marking
out, it was time to go so I couldn’t get check.
Emotion: I was little bit sad that I couldn’t get check from teacher. I was
happy that I was measuring and mark out wood for tree shape.
AOI: AOI is environment, because I’m trying to save wood to not harm
the nature.
Learner profile: Learner profile is risk taker, because I started to
measure and mark out wood for tree shape.
What next: I need to get check from teacher, and I need to cut wood for
tree shape.
Why: I was happy to do new thing, but I was in difficulty when I was
measuring and marking out wood for tree shape. It was hard to make 2
parts same.
Measuring and marking out
Picture of wearing apron wood for tree shape.

9. Cutting wood for tree shape
17/10/2011
What you did: I was keep cutting wood for tree shape. It was really hard
to cut, and I broke one coping saw. I cut wood like 30minutes I think.
When I finished cutting wood, teacher helped me cut hard parts. Then I
was filing my wood to make my wood smooth.
Emotion: I was happy that I went to next step. Also, I was tired of filing
wood again.
AOI: AOI is environment, because I’m trying to save to wood to not harm
the nature.
Learner profile: Leaner profile is risk taker, because I’m trying new things
that I didn’t try in my life. Also, I think I am thinker, because I’m thinking
which angle is good to cut.
What next: I need to file my wood more, and I need to cut another wood
for tree shape.
Why: I was really happy that I started next step. However, I was little bit
tired when I need to cut wood for 30 minutes. I think I need to be better
and cutting wood.
Picture of cutting wood Picture of filing wood

10. Cutting another wood for
tree shape and filing wood
18/10/2011
What you did: I was cutting another wood for tree shape. I was trying my
best to cut my wood. It took 20 minutes to finish cutting wood for tree
shape. However, I broke one coping saw when I was cutting leaves. It
was my second time breaking coping saw. I think I need to be careful
when I cut wood. Also, I started filing my two pieces of wood for tree
shape. It was kind of hard to make smooth, but I tried my best to make
smooth.
Emotion: I was little bit sad when I broke one coping saw, but I was
happy when I started filing my wood for tree shape.
AOI: AOI is environment, because I’m trying save wood to not harm the
nature.
Learner profile: Learner profile is risk taker, because I’m trying new
things. Also, I think I am thinker, because I am thinking which angle will
good to cut wood.
What next: When I finish filing my wood, I need make turtle shape. I
think it will be hard to make turtle shape, but I will try my best to do it.
Why: I was happy when I went to next step, but I was little bit sad when I
started to file wood. I will try my best to make my toy nice.
Picture of cutting another shape of Picture of filing wood for tree shape
wood for tree shape.

11. Filing wood by using half
round files
22/10/2011
What you did: I was trying to file wood for tree shape in one period. I was
filing everywhere that I can file. I was using half round file to file wood
that made for tree shape. When I got checked by teacher, teacher said
it’s great. Then I was going to use disk sander to make my wood
smoother, it was time so I couldn’t.
Emotion: I was glad that teacher said great, and I was happy that I
finished filing wood in one period.
Learner profile: I think I am thinker, because I’m trying to find how to
make wood smooth.
AOI: AOI is environment, because I’m trying to save wood to not harm
the nature.
What next: I need to use disk sander to make my wood smooth, and I
need to file another wood for tree shape.
Why: I was trying really hard to get my wood smooth. However, it was
little bit hard when it came to hard part. Sometimes there is line so I had
to make that line erased. It was kind of hard, but I was trying my best to
sand my wood.
Picture of using half round files to
file wood.

12. Disk sanding and filing
wood
28/10/2011
What you did: I was disk sanding my wood to make my wood smooth. It
was hard when I was disk sanding hard part. Then I was filing another
wood. It was harder than what I filed before. I think it will took 2 days to
file perfectly. Also, I marked with pencil where I need to disk sand wood.
Emotion: I was kind of happy when I finished filing one wood. Also, I was
little bit tired of filing another wood.
AOI: AOI is environment, because I’m trying save wood to not harm the
nature.
Learner profile: I think I am risk taker, because I’m doing new things that
I didn’t do before.
What next: I need to sand my wood a lot, and I need disk sand wood
that made for tree shape. Then I need to make one block to put under
the tree.
Why: I was little bit nervous when I was disk sanding, because I thought
that is this right way to do it. Also, I was happy when I start to file another
wood, but I was tired when I started
to
file Picture of using disk sander to make
wood smooth.
wood.
Picture of marking where I need to
disk sand.

13. Disk Sanding, filing, and using drill wood
to make wood smooth, and make hole
31/10/2011
What you did: I was filing wood with half round files. It was little bit hard
when I need to file difficult part. Then I used disk sander to make my
wood smooth, and equal. I used pedestal drill to drill holes. It was little
bit nervous, but I did it. Then I was fling wood that for bottom of tree. It
was not really working, but I was trying to make that wood smooth.
Emotion: I was happy, because I did many things, but I was tired when I
was filing wood again.
AOI: I think AOI is environment, because I’m trying to save wood to not
harm the nature.
Learner profile: Learner profile is risk taker, because I was trying new
things.
What next: I need to finish filing wood then I need to stick wood with tree
shape wood.
Why: I was happy when I finished many things, but I was tired when I
needed to file again. I hate to file wood, but I was happy when I am
going next step.
Picture of drilled hole
! ! !
Picture of using sand paper to make
wood smooth.

14. Using PVA glue and using screws to make 3 woods
stick.Also, cutting turtle shape wood.
4/11/2011
What you did: I was using PVA glue to stick 2 tree shape wood, and little
block. Then, I drilled more to make put screws easier. I was putting
screws to make woods stick. It was kind of easy, but I heard some
breaking sounds. Then I brought wet cloth to wipe off the2 extra PVA
glue. Also, I was filing wood to make wood smooth. One more that I was
using pedestal drill to drill holes. Then I was cutting wood that is for
turtle. It was kind of hard to cut turtle shape wood. I was trying hard to
cut the wood.
Emotion: I was happy, because I’ve done many things today. I was little
bit tired when I was cutting turtle shape wood.
Learner profile: I think I’m risk taker, because I’m doing new things. I
haven’t done like using pedestal drill to drill holes.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. We are using
wood to make toy so it’s connects to environment
What next: I should file more, and I need to cut turtle more to get perfect.
Then I need to file the turtle shape wood. Also, I need to file tree shape
more to make my wood smooth.
Why: I was happy when I finished many processes, but I was little bit
tired when I need to do more processes. I think I’m really back than
others. I think I need to speed up to finish quickly.
Picture of unfinished cutting Picture of finished sticking
turtle shape wood. three woods.

15. Filing and using garnet paper to make
wood smooth
7/11/2011
What you did: I was keep filing wood about 30 minutes, and I was using
garnet paper for rest of time to make wood smooth. It was kind of tiring
and it was kind of boring to sand and file. I was trying hard to file and
sand wood to make smooth. I was using half round file to make my wood
smooth.
Emotion: I was tired when I needed to file and sand wood. I was happy,
because I’ve done many processes.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. We are using
wood to make toy so it’s connects to environment
Learner profile: Learner profile is communicator, because I am
communicating with people to give suggestions of my toy.
What next: I need to file and sand wood more and I need to work on
turtle shape wood. Then I need to file and sand turtle shape wood again.
Why: I was happy when I finished many steps. However, there were
many steps left so I think I need to finish quickly as I can. It is really hard
to do one step so I think I need to try my best to finish making toy.
Picture of using garnet paper and
sanding block to make wood
smooth.
Picture of using half round file to file
wood.

16. I was using disk sander to make turtle
shape wood smooth, and remove extra
parts.
8/11/2011
What you did: I was using disk sander to make turtle wood smooth, and I
removed extra parts. It was kind of hard, because I needed to change
board’s angle so that I can disk sand some difficult parts. Then I was
drilling holes in the base, which is island. I was using pedestal drill to drill
holes. Then I was putting nails to put stick island and tree. I was
concerned with how to put two things in right way, and it was time so I
had to do next time. I was filing trees more so I can have trees smooth. I
also put woof fill thing to cover a hole.
Emotion: I felt little bit tired when I need to screw nails to stick island and
trees.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. We are using
wood to make toy so it’s connects to environment
Learner profile: I think I am inquirers, because I am curious and enjoy
learning tools.
What next: I need screw nails to stick island and trees. Then I need to
stick trees and turtle. I think it will took long, but I will try to finish making
toy.
Why: First time it was kind of fun, but now it’s little bit hard. The reason
why, because there are many steps to follow. However, I’m trying to
make toy perfect to make children play with my toy. I think it will be
difficult job, but I will try my best to make toy best.
Brown thing is wood filler to cover a Picture of using garnet paper to make wood smooth

17. Drilling holes in turtle and trees
11/11/2011
What you did: I was drilling hole in island first to help join the trees and
island. It was kind of hard to drill, but I tried my best. Then I was sticking
island and trees together. However, because of I drilled deep I needed to
use another screws to stick together. I was drilling hole and trees too,
because I want to stick two together. It was kind of scary when I was
drilling hole on turtle. I used pedestal drill again to drill hole on the turtle
and trees. I used screw driver and screwss to stick island and trees.
Emotion: I was little bit nervous when I was drilling holes on turtle. Also, I
was little bit sad that I’m behind from others.
Learner profile: Learner profile is communicator, because I am
communicating with friends to ask is this looking good or not.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. We are using
wood to make toy so it’s connects to environment.
What next: I need use PVA glue to stick turtle and trees. Then I need to
file little bit more and I need paint all the woods. I think it will took long
time, but I will try my best to finish my toy.
Why: I thought it will took not long, but it took really long time so I think I
need to finish working on toy quickly. I think I waste my time on filing and
cutting. I will try my best to finish the toy and I will try to make my toy
beautiful or fantastic.
Picture of drilling hole on tree shape
wood.

18. Painting my toy
14/11/2011
What you did: I was painting my wood. It was kind of nervous when I
was painting. Because if I do mistake, I couldn’t fix it. I was trying my
best, but I got a lot of punishment from teacher. The reason why,
because I put cap of bottle, which has paint on the table. Later I did
another mistake so I think I need to be better at painting. Even if I got
many punishments, I will try my best to paint my toy. I used paint brush,
cardboard, and water bottle to paint my toy.
Emotion: I was tired when I got many punishments and I was nervous
when I started to paint my toy.
Learner profile: Learner profile is communicator, because I am
communicating with friends to make my toy better.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. I’m using
wood to make toy so it’s connects to environment.
What next: I need to paint tree more and I need to paint island. I need to
file when I finished painting my toy. Then I need to connect turtle and
trees with spring.
Why: I was tired when I got many punishments, but I will try my best to
paint my toy. It could be hard to fix when I do mistake, but I will try to
concentrate on my own work.
Picture of not finished painting tree
shape wood.

19. Sanding and painting my toy
16/11/2011
What you did: I was sanding my toy first to make my toy smooth. Then I
was painting my toy. I used paint brush, paint, and water to paint my toy.
I was trying to paint well,but it’s not working really well. I was painting
new part, which is island and sea part. I didn’t paint sea part, but I paint
island part. The color tree that I painted was so light, but I wanted to
have dark color. However, this toy is for kids so I will just paint with
brown that is light. I used paint, which is acqualic paint.
Emotion: I was little bit sad when I the color of tree is bright. Also, I was
tired when I need to paint again and again.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. I’m using
wood to make toy so it’s connects to environment.
Learner profile: Learner profile is communicator, because I am
communicating with friends to make my toy better.
What next: I need to paint all the parts and I need to sand my toy to
make my toy smooth.
Why: I was happy when I feel my toy smooth, but when I paint the wood
got rough. I needed to sand again to make to make smooth. I was
thinking every time when I could finish making my toy.
Picture of paint brush
Picture of acqualic paint

20. Sanding my toy and painting my toy again
17/11/2011
What you did: I was sanding my toy to make wood smooth. It was kind of
easy, but it was kind of hard to paint. Painting was the hardest job for
me, but I was trying hard to paint. There was one accident, which little bit
brown color got on the island so I had to sand really hard. When I
painted island with yellow paint, the brown color was coming out little bit.
Next time, I had to sand really hard again and paint my toy. I think my
toy will finish on tuesday. I was using paint, paint brush, cardboard,
water to paint the toy.
Emotion: I was happy when I almost finished with my toy. However, I
was sad that we don’t have much time to finish the toy.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. I’m using
wood to make toy so it’s connects to environment.
Learner profile: Learner profile is communicator, because I was trying to
discuss with friends about how can I paint well or what paint will be
appropriate for this wood. I also think I am risk taker, because I was
trying to use new tools.
What next: I need to sand the toy again to make my toy soft. Then I
need to paint the toy to make the toy pretty. I want to have like 3 days to
paint last part, but there is only 2 days so I think I need to work hard.
Why: I was happy when I got to last part, but I was sad when have only
3 days. I had to stick wood and turtle with spring, but I need to paint and
sand. So I think I better be finished on monday. That can make me finish
making toy on tuesday.
Picture of cardboard Picture of garnet paper

21. Sanding and painting the toy again
21/11/2011
What you did: I was sanding the toy again to make smooth and to paint
again. Then I was using paint, paint brush, cardboard and water to paint
my toy. I was trying to paint my toy nicely, but it’s not working very well.
First I was painting leaves then I was painting island, sea and trees to
finish making toy. I need to sand and paint sea again and I need to stick
turtle and tree to finish my toy.
Emotion: I was little bit happy when I am almost at the last stage. Also, I
was tired of sanding and painting the toy again.
AOI: AOI is environment, because I’m trying to save wood not to harm
the nature, so I try not to make mistakes and waste wood. I’m using
wood to make toy so it’s connects to environment.
Learner profile: Learner profile is communicator, because I was trying to
discuss with friends about how can I paint well or what paint will be
appropriate for this wood. I also think I am risk taker, because I was
trying to use new tools.
What next: I need to sand and paint sea again. Then I need to use some
kind of glue to stick trees and turtles.
Why: I was happy when I did many steps, but I was tired when I was
filing or sanding the wood. I was really tired of doing same job for 2 or 3
periods.
Picture of painting leaves
Picture of unfinished toy