1. CALIN ION
PERSONAL INFORMATION CĂLIN ION
12 N.Titulescu Street, zip code 905200, Cernavoda, Romania,
+40720390755 Romania
calinionut2002@yahoo.com ; calinion2002@gmail.com
Sex Male | Date of birth 16/07/1985 | Nationality Romanian
WORK EXPERIENCE
Period: Feb 2014 and still on going
Company: S.C. GRUP SERVICII PETROLIERE S.A.
Position: Assistant crane operator
Duties include: Operating assigned crane in a safe manner, carry out crane operations including vessels unloading and
loading as required. performing routine maintenance and report any malfunction to Crane operator, Barge engineer and Tool-
pusher. Train deck crew to slinging practices, standard crane signals, slings inspections and selection, supervise deck crew,
among others. Able to perform job functions very safely (familiarity with risk analysis procedures and safety
awareness ), follow instructions listed on rig roster in case of emergency. Stop crane when helicopter is announced. Collect
and report all hazardous, damaged or worn items. Organise equipment and materials on deck to provide adequate and safe
working area. Able to participate very actively in pre-job meeting with the deck crew. Prepare pre-job meeting for deck crew.
Excellent skills in manoeuvring cranes, knowledge in operating cranes, skills in maintaining cranes, good communication
skills. Lifting and moving special drilling tools such as radioactive tools and equipment, explosive tools and tubular explosive
equipment, rig up wire line equipment in performing drilling operations. Confirmed chains are installed accurately before
operating the cranes. Inspected, maintained inventory of all slings, chains, ropes, shackles, and other hoisting equipment.
Ensured safety of all crew members and co-workers, at job site.
References for recommendation from Offshore Installation Manager Dragos Ionascu : ionascu.dragosgeorge@gmail.com
and phone nr: +40722466491
Period: June 2013 and still on going
Company: S.C. GRUP SERVICII PETROLIERE S.A.
Position: Roustabout
The primary focus is to safely perform various work activities that assist the Crane Operator including: loading and off-loading
equipment, lifting and moving various equipment, systems, containers, tubulars, palletized materials, and other supplies about
the installation.
Establish job requirements and identify appropriate rigging equipment and plan work procedures from the verbal instruction
and specification provided by the supervisor. Assemble and install rigging gear to lift, lower, move or position loads. Maintain
and inspect carefully rigging gear for breakage, deformity, corrosion, cracks and any other defects and know the capabilities
and capacities of such items. Recognize common defects in lifting equipment and when and when not to use them. Examine
objects to be moved, the size, shape, weight, free from raise, protect the sling from any sharp edges, any support used to
suspend the load is strong enough for the job, keep well clear of all loads in motion and decide on the type of equipment
necessary to move them. Communicate efficiently with crane operator using either conventional hand signs or
communication head sets. Perform hands on training of general rig maintenance, repair, installation and removal of all crane,
rigging/slinging, tagging loads, working overhead, assisting crew, lifting loads, deck maintenance equipment, deck
maintenance about the installation to include cleaning, painting, and housekeeping.
Page 1 / 5
POSITION
PREFERRED JOB
CRANE OPERATOR
CRANE OPERATOR

2. CALIN ION
Period: Oct. 2012 and Dec. 2012
Company: SC ETA TECNOLOGY SRL S.p.A. Italy
Position: Mechanic, Rigger - Crane Operator and Forklift Driver
Within this company I held several positions, because of my skills. I worked for the company Marcegaglia Steel
S.p.A. factory in Revenna, the contract was on limited term, because was scheduled stop for maintenance and
repairs in different sectors of the factory.
-As mechanic: We changed line tandem rollers (I changed rolls from 72 kg to 5 tons), faulty engines, wheel alignments, disk
and drum brakes, steering racks, ball joints, checked and tight loose screws.
-As rigger: performing rigging duties with extensive knowledge of rigging equipment and their capacities, inspecting all
applicable rigging, planning for lifts using weight of the load, and able to estimate lifting capacity of equipment.
I was assigned to several duties that included installing and positioning equipment for safety purposes, cleaning and dressing
materials and component parts, controlling the movements of heavy machinery for proper work.
-As crane operator: Operate gantry crane and pivoting crane with articulated arm, for lifting heavy equipment and materials.
Changing rolls up to 5 tons, loading heavy engines and positioning them on site, moving the team equipment where was
needed.
-As forklift driver: using the forklift to move heavy materials and equipment. Transporting materials and equipment near a
loading point. Removing used rolls and transporting them to the recycling area.
-Benefits: The employer took charge of my accommodation and transportation
Period: Apr. 2012 – Sep. 2012
Company: SC FIBELECT SRL
Position: Electro-Mechanical Technician
Work performed: Within this company I worked as an electrician in the industrial sector. I work for GlaxoSmithKline(GSK).
Reading connection wiring diagram,elementary diagram,cable data sheet,instruction manuals ,technical specification & as
build revisions on the drawings performed on a project basis following installation of equipments in the plant ,wire
conexions,pulling cables, wired control panels according to plan, mounted electric valves, electric ventilation damper,
temperature probes and manufactured and installed bed cable for all the electrical plant.
-Benefits: the employer took charge of my accommodation and transportation
Period: Oct. 2010 – Jun. 2011
Company: S.C. SELMARV PERSONAL S.p.A. Italy
Position: Electro-Mechanical Technician
Work performed: Tasks: Sent to work under the company Guastini Industria Elettrotecnica in the shipyard Sestri Ponente,
Genoa, Italy. Fabricates, tests, analyzes, and adjusts precision electromechanical instruments (such as accelerometers,
altimeters, electromedical instruments). Servicing, repairing, adjusting, and testing machines, devices, moving parts, and
equipment that operate primarily on the basis of mechanical (not electronic) principles. Operates metalworking machines,
such as bench lathe, milling machine, punch press, and drill press to fabricate housings, fittings, jigs, and fixtures, and verifies
dimensions, using precision measuring instruments for Shakti, this ship was built for the Indian navy army.
Assembles wires, insulation, and electrical components, such as resistors and capacitors, following method layouts, using
fixtures, binocular microscope, soldering equipment, tweezers, and handtools. Installs electrical assemblies and hardware in
housing, using handtools and soldering equipment.Operate, test, and maintain unmanned, automated, servo-mechanical, or
electromechanical equipment. On this ship I made also electrical installations , pulled cables, links to engines, mounted
electrical panels, manufactured and installed cable plant beds, welding framework for electrical panels and weight support.
I worked as an assistant with a fitter for two months of this period, what brought me enormous advantages incrising my
knowledge base in this type of job.
Benefits: During my stay in Genova Italy, the employer took charge of my accommodation and transportation
Period: Feb. 2010 – May. 2010
Company: RAPPA IMPIANTI S.R.L S.p.A. Italy
Position: Electro-mechanical Technician and Interpreter
Work performed: Tasks: to set electrical installations for low and medium power in terrestrial and maritime platforms
according to the implementations project. Developing specific goals and plans to prioritize, organize, and accomplish my
work. Align, fit, and assemble component parts, using hand tools, power tools, fixtures, templates. Achievements: I’ve set on
the oil platform SCARABEO 8 for Norway in the Tyrrhenian Sea, the distribution network for lighting and plugs, including the
installation of electrical panels of distribution On the platform I made also electrical installations , pulled cables, links to
Page 2 / 5

3. CALIN ION
engines, mounted electrical panels, manufactured and installed cable plant beds, welding framework for electrical panels and
weight support in a team of eight electricians. Within this team, I’ve ensured the proper communication between the
Romanian team members and the Italian personnel. Analyze and record test results, and prepare written testing
documentation. Inspect parts for surface defects. Install electrical and electro-mechanical parts in housings or assemblies,
using soldering equipment and hand tools. Repair, rework, and calibrate hydraulic and pneumatic assemblies and systems to
meet operational specifications and tolerances. Test performance of electromechanical assemblies, using test instruments
such as oscilloscopes, electronic voltmeters, and bridges. Verify dimensions and clearances of parts to ensure conformance
to specifications, using precision measuring instruments. Develop, test, and program new robots. Operate metalworking
machines to fabricate housings, jigs, fittings, and fixtures.
- Benefits: During my stay in Palermo Italy, the employer took charge of my accommodation and transportation
Period: Nov. 2007- Feb. 2010
Company: SC Detacan S.A. Cernavoda / SC Raja Constanta S.A.
Position: Shift Boss
Work performed: Responsible for Installing, maintaining, and repairing electrical wiring, equipment,
& fixtures. Making sure that all work done is in accordance with Health & Safety
regulations. Also involved in advising clients and senior managers verbally or in
writing on hazardous equipment and essential work that needs doing. Tasks: Electrician (maintenance and exploitation of
electrical installations), operator in charge with used water pipes and tour leader . Collected and consolidated hazardous
waste liquid and solids from laboratories to specialized Hazardous Waste Storage Area. Ensuring discharge requirements
were met before discharging to local sewer systems. Repair, rework, and calibrate hydraulic and pneumatic assemblies and
systems to meet operational specifications and tolerances. Test performance of electromechanical assemblies, using test
instruments such as oscilloscopes, electronic voltmeters, and bridges. Verify dimensions and clearances of parts to ensure
conformance to specifications, using precision measuring instruments. When company was sold to a large size company I
had to work on several areas within the wastewater treatment plant such as: dispatcher, maintenance electrician and field
operator. In the heavy winter months I have insured the proper circulation of the decantation systems preventing ice
depositing on the raceway.
-Achievements: Ensuring the proper exploitation of the water purification installations, pipes and valves system.
-Benefits: restaurant tickets, transportation
Period: Jul. 2005 – Jul. 2006
Company: Nuclear Power Plant Cernavoda UNIT 2
Position: A.M.C. ELECTRICIAN
Work performed: Technical suport for maintenance section, issuing and reviewing of maintenance Procedures.Inspect parts
for surface defects. Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of
assembly. Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring
instruments. Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic
voltmeters, or bridges. Analyze and record test results, and prepare written testing documentation. Align, fit, or assemble
component parts, using hand or power tools, fixtures, templates, or microscopes. Install electrical or electronic parts and
hardware in housings or assemblies, using soldering equipment and hand tools. Repair, rework, or calibrate hydraulic or
pneumatic assemblies or systems to meet operational specifications or tolerances. Operate metalworking machines to
fabricate housings, jigs, fittings, or fixtures. AMC electrician, translator, acquiring materials from the unit’s warehouse. I’ve
successfully verified and started the compressors of nuclear power plant’s Unit 2, working with the Italian team Atlas Copco
Divizione Compresorii. I’ve ensured the proper communication between my team (Common Sevices) and Ansaldo, within
CNE INVEST Cernavoda. Due to my proficiency in acquiring the materials, the piece of work at CNE Cernavoda Unit 2 was
finished and delivered on time. Benefits: restaurant tickets, transportation.
Page 3 / 5

4. CALIN ION
EDUCATION AND TRAINING
PERSONAL SKILLS
Page 4 / 5
• OFFSHORE CRANE OPERATOR STAGE 1&2 from Survivex
• BANKSMAN/ SLINGER from Survivex
• HSE Basics Training course @ MAVLO 1 – Romania
• HSE Training course @ MAVLO 3 offshore and onshore crane op
and slinging practices – Romania
• H2S AWARNESS Training Course from S.I.S Servizi Integrati Di
Sicurezza
• BOSIET – offshore survival training
• HSE RIG PASS from IADC
• H2S (NOGEPA 0.8 ) from Falck Safety Services
• TM Detailed TRA Permit to work from Falck Safety Services
• A.T.P. - Professional Training Center 15.10.2010 – 14.02.2011
o Crane operator , Rigger .European class B cranes.
o Authorization to inspect crane to assess risks in the
workplace and to operate a crane.
o Thorough knowledge of the operational characteristics
and capabilities of heavy construction equipment to
include, but not limited to, cranes, backhoes, front-end
loaders, dump trucks, etc.
o Knowledge of heavy rigging operations, to include the
knowledge of the use and application of rigging tools,
such as wire rope and wire rope slings, chain and fabric
slings, woven wire slings, load binders, come-alongs, and
chain falls.
o Authorization from ISCIR Romania
o Nr. License: C_9N_003526_14.02.2011
• A.T.P. - Professional Training Center 15.08.2010 – 19.10.2010
o Forklift driver. Authorization to inspect a forklift to
assess risks in the workplace and to operate a forklift.
o Authorization from ISCIR Romania
o Nr.License:C_308R_004783_19.10.2010
• Diploma in MS Office, ACCESS, EXCEL, WORD, POWER
POINT
• TRAK (CANDU ,Document Control SOFT)
• STA (Safety Task Analysis)
• Technician exploitation and maintenance wastewater
treatment plants
• 2000 - 2004 (4 years education) Electro Technical High School
with a qualification as an Electromechanical technician.

5. CALIN ION
Page 5 / 5
Mother tongue(s) ROMANIAN
Other language(s) UNDERSTANDING SPEAKING WRITING
Listening Reading
Spoken
interaction
Spoken
production
English FLUENT FLUENT FLUENT FLUENT GOOD
Italian FLUENT FLUENT FLUENT FLUENT GOOD
French - Spanish MEDIUM BEGINNER BEGINNER BEGINNER -
Communication skills  Communicative, good learning and assimilation, highly regarded for a positive
attitude and an ability to provide ideas and solutions.
Job-related skills  Mechanical knowledge of machines and tools, including their designs, uses, and
maintenance. Like: cutting, polishing, welding
Computer skills  Computers and electronics knowledge of circuit boards, processors, chips,
electronic equipment, and computer hardware and software, including applications
and programming.
Other skills  Public Safety and Security knowledge of relevant equipment, policies, procedures,
and strategies to promote effective local, state, or national security operations for
the protection of people, data, property, and institutions. Complex problem solving,
identifying complex problems and reviewing related information to develop and
evaluate options and implement solutions
Driving licence  B category

6. CALIN ION
Page 5 / 5
Mother tongue(s) ROMANIAN
Other language(s) UNDERSTANDING SPEAKING WRITING
Listening Reading
Spoken
interaction
Spoken
production
English FLUENT FLUENT FLUENT FLUENT GOOD
Italian FLUENT FLUENT FLUENT FLUENT GOOD
French - Spanish MEDIUM BEGINNER BEGINNER BEGINNER -
Communication skills  Communicative, good learning and assimilation, highly regarded for a positive
attitude and an ability to provide ideas and solutions.
Job-related skills  Mechanical knowledge of machines and tools, including their designs, uses, and
maintenance. Like: cutting, polishing, welding
Computer skills  Computers and electronics knowledge of circuit boards, processors, chips,
electronic equipment, and computer hardware and software, including applications
and programming.
Other skills  Public Safety and Security knowledge of relevant equipment, policies, procedures,
and strategies to promote effective local, state, or national security operations for
the protection of people, data, property, and institutions. Complex problem solving,
identifying complex problems and reviewing related information to develop and
evaluate options and implement solutions
Driving licence  B category