1. HASSAN N. A. HAJEH_______________________________________________________________
House no. 901, Road no. 1119, Block 711, Manama, Bahrain
Ph: +973 39414800
Hnegahdar1965@gmail.com
U9727u@gmail.com
Professional Sumary__________________________________________________________________
It gives me the pleasure to write to you enquiring about an opportunity to join your prospective
organization in a suitable position which you think suites my current experience and qualifications.
I have been working with Aluminum industries for the past twenty two years, I spend four years
at Bahrain Atomizer International ‘BAI’ as a project engineer, then I moved to Aluminum Bahrain
‘Alba’ as an electrical/ Instrument engineer in engineering department, later I was promoted to
senior electrical/ Instrument engineer. After working fifteen years as a senior engineer at
engineering department, I transferred to maintenance department in Reduction Services as an
electrical/ Instrument superintendent.
My working style is characterized by a high degree of confidence and confidentiality and by the
use of demanding quality standards, emphasizing planning and monitoring of the areas under
control. Below you will find the outlining for my experience to date and key skill areas. I have
extensive experience dealing with local and international suppliers and contractors, furthermore I
have proven ability to manage large-scale projects consistently delivering these engagements
within time and budget constraints. I possess a solid track record for leading and motivating
technical professionals in order to achieve a high level of performance.
My experience is in perfect line with your current organization needs.
I would welcome the opportunity for a personal meeting to further discuss how my qualifications
and experience can best suit your needs and also to discuss my application with you.
Skills__________________________________________________________________________
Do have a very good industrial knowledge and experience in both engineering and maintenance
areas, in engineering it includes the complete end-to-end project management, from the initial
concept & budget preparation stages, through to the design, construction, installation,
commissioning & handover to operational management, and as a maintenance superintendent for
the last three years I have possessed a wide range of experience in handling maintenance activities,
dealing with employees and plant issues, satisfy operation requirements, preparing the SOP’s and
JSP’s.
During this twenty two years of service in multidisciplinary areas and attending many different
management courses in house by Aluminum Bahrain and out of plant, overseas the following skills
were acquired :-
- Design - Troubleshooting
- Engineering and Technology - Foreign Language
- Equipment Maintenance - Equipment Selection
- Installation - Repairing
- Production and Process - Critical Thinking
- Administration and Management - Complex Problem Solving
- Customer and personal Services - Judgment and Decision Making
- Operation Monitoring - System Analysis
- Active Listening - Quality Control Analysis
- Management of Personnel Resources - System Evaluation

2. - Service Orientation - Operation and Control
- Management of Material Resources - Negotiation
Experincd______________________________________________________________________
Electrical, Instrument & Mechanical Superintendent March 2012 – March 2016
Aluminium Bahrain – Manama, Bahrain
1. Plan, administer and control budgets for contracts, equipment and supplies.
2. Monitor the facility to ensure that it remains safe, secure, and well-maintained.
3. Prepare and review operational reports and schedules to ensure accuracy and efficiency.
4. Set goals and deadlines for the department.
5. Oversee the maintenance and repair of machinery, equipment, and electrical and mechanical
systems.
6. Oversee construction and renovation projects to improve efficiency and to ensure that facilities
meet environmental, health, and security standards, and comply with government regulations.
7. Participate in architectural and engineering planning and design, including space and installation
management.
8. Analyze internal processes and recommend and implement procedural or policy changes to improve
operations, such as supply changes or the disposal of records.
Senior Electrical/ Instruments Engineer Feb 1998 – Feb2012
Aluminium Bahrain – Manama, Bahrain
1. Install or maintain electrical control systems, industrial automation systems, or electrical
equipment, including control circuits, variable speed drives, or programmable logic controllers.
2. Diagnose, test, or analyze the performance of electrical components, assemblies, or systems.
3. Supervise the construction or testing of electrical prototypes, according to general instructions
and established standards.
4. Calculate design specifications or cost, material, and resource estimates, and prepare project
schedules and budgets.
5. Compile and maintain records documenting engineering schematics, installed equipment,
installation or operational problems, resources used, repairs, or corrective action performed.
6. Review installation or quality assurance documentation.
7. Review, develop, and prepare maintenance standards.
Project Engineer
Bahrain Atomisers International, Manama, Bahrain Jun 1994 – Jan1998
Started as a project engineer for design, install, and commission of a new atomizing plant, then moved as
a head of maintenance.
Technician
Bahrain Telecommunication Company, Manama, Bahrain April 1989 – Jun 1990
Responsible for the maintenance of all international transmission communication Lines
Education_____________________________________________________________________
Associate of Science : Electronics Engineering Technology July 1988
University of Bahrain, Al-Zallaq
Bachelor of Science : Electronics Engineering Technology July 1992
Southeastern Oklahoma State University – Durant, OK

3. Additional Information_________________________________________________________
Some of the main project handled on Alba during working as a Senior engineer in engineering department
and as a maintenance superintendent in both Casthouse and Reduction Services Plants :-
1. Design, Install, and commissioning of Hot Aluminium Crucible Cleaning Machine ‘STAS’ at
Reduction Services Plant.
2. Design, Install, and commission of two new 20/5 Ton electric overhead cranes.
3. Modify ‘GNA’ Cathode sealing equipment to suit the new enlarged Cathode block.
4. Modify PTA shovel to improve the pot cleaning for enlarged Cathode.
5. Installation and commissioning of Alcan Compact Degasser (ACD).
6. Design, install, and commission GTC-1&2 main silo Fresh Alumina feeding by-pass systems.
7. Upgrade two 6 ton electric overhead cranes at Cathode Sealing Area
8. Modify 16 ton crane to be installed at old STAS Crucible Cleaning Area.
9. Modifications on Properzi continuous casting machine
10. Relocation, Installation, and commissioning of old casting line at Casthouse plant
11. Installation and commissioning of Holding/ Remelt furnaces
12. Involved in re-design Ceramic Foam Filters (CFF), installation and commissioning.
13. Modifications on Continuous Homogenising Furnaces
14. Modifications on the billet cutting saws system including pin stamping unit.
15. Involved in purchasing, design approval, installation, and commissioning of Tee Bar Tooling system.
16. Replace all obsolete control panel views for FTP 1-4 and GTC 1&2
17. Involved in purchasing, design approval, installation, and commissioning of Tee Bar Tooling system.
18. Upgrading Cooling Water Plant system
19. Involved in selection and design approval for replacing of the old conventional carbon conveying
system with new dense phase conveying system at Carbon plant.
20. Modifying main gas system.
I was forming one of the “Key Employee” in one of the biggest projects in the Middle East, the Line 5
Project for the Aluminum Bahrain Company (ALBA) which worth $1.7 Billion.
Electrical, Instrument & Mechanical Superintendent
During working as an Electrical, Instrument, and Mechanical Superintendent, I was responsible for the
maintenance and operation of the following areas:-
1. Fume Treatment Plant (FTP’s) 1 to 4.
2. Gas Treatment Plant (GTC’s) 1 to 4.
3. Micro Pot control system Lines 1 to 5.
4. Crucible Cleaning Area.
5. Fluoride Station Area.
6. Metal Transfer Station (MTS)
7. Lab Equipment’s.
Senior Electrical/ Instruments Engineer
Working as a part of multidisciplinary engineering group on large, medium and small size projects. Full
responsibility for the electrical & instrumentation project requirements associated with major
equipment’s and facility improvements from conceptual layout/design through specification, contract
negotiation and documentation, installation and commissioning.
The job mainly focuses on:-
1. Identification of operation and maintenance related problem in Plant and Equipment.
2. Comprehension of suitable design engineering solutions including drawing.
3. Preparation of specification and contract documentation.

4. 4. Review and evaluation of tender and award of contract.
5. Execution and coordination of the work till successful completion and commissioning.
6. Complete documentation for the project including administrative closure of the project.