1. ARPET INSTALLATION
laying of luxury…

2. WHAT IS CARPET…
A carpet is a textile floor covering consisting of an upper
layer of "pile" attached to a backing. The pile is generally
either made from wool or a fiber such as nylon or
polyester. Carpet is either manmade and machine made.

3. CARPET INSTALLATION
TOOLS
 Adhesive Nozzle, Spreads
 Knee Kicker
 Carpet Knife
 Loop Pile Cutter
 Carpet Trimmer
 Scissor
 Carpet Seam Roller

4. Knee Scissor
Kicker
Adhesive Measuring tape

5. OTHER MATERIAL USED…
 Double sided tape
 Underlay
 Adhesive
 Measuring tape
 Steel channel
 chalk

6. INSTALLATION PROCESS
 Determine the area:
First of all we must know the area where carpeting needs
to be done. Dimension of the area will define the amount
of carpet we require.
 Clean the subfloor:
Cleaning of subfloor is important. It should be free from
dust, dirt and moisture and it must be smooth too.

7.  Lay the underlay:
This is also known as carpet pad. It is laid over subfloor
using adhesive and it is available in different material
sponge rubber, foam. It also gives cushioned feeling
while walking over it.
 Trim the underlay:
Underlay should not be overlapped to each other. So
trimming should be done properly.

8.  Trim the carpet to size:
Cut the carpet 3” bigger than the area where it should be
installed. 3” extra is taken for error and to match the pattern
and design of the carpet.
 Apply adhesive:
Apply the adhesive on bottom of the carpet.
Usually synthetic adhesive is used.

9.  Lay the carpet:
Carpet is laid by side by side keeping in mind its
pattern, design and edges where it should join to other
piece of carpet. It should not overlap on each other and
also do not allow the air between carpet and underlay.

10.  Stretch the carpet:
Stretch the carpet from all the sides with hands
and with knee kicker. It should not be
stretched too much.
 Attach the edge of the carpet:
Attach the edges of the carpet . Here joining of pattern and
design is important. Because one inch difference can spoil
entire flooring.

11.  Cut the excess carpet:
After adjusting from all the sides. There will be
excess carpet that should be trimmed.
 Tuck the edge of the carpet:
Tuck the edges of the carpet from all the
sides in steel channel. Steel channels are
available in different width.

12. http://www.youtube.com/watch?list=UUgrP-
HoEYBLo1wDF4dJYpuA&v=VRv5YMTSCh0&feature=player_detailpage
THANK YOU!
Shared by
Ayush Agarwal
Housekeeping Manager
Ista Ahmedabad