More Related Content
Similar to Papyrus: Settings to allow map page to display (6)
Papyrus: Settings to allow map page to display
- 1. Integrated Spatial Management
Information System
UPDATE SETTINGS TO ALLOW MAP
PAGE
January 2008
Global Image GIS Consultants
Enquiries: Susan Esterhisen
http://www.globalimage.co.za
TechnoStell Building Unit 2; Quantum Street; Techno Park
PO Box 5646, Heldervue, 7135
e-Mail: support@cpt-globalimage.co.za
Tel: +27 (0) 21 880 1891
Fax: +27 (0) 21 880 2077
© GLOBAL IMAGE CONSULTANTS PAGE 1 O F 5
Update settings to allow map page
- 2. TABLE OF CONTENTS
1. Introduction ................................................................................... 3
2. How to update the settings ............................................................. 3
© GLOBAL IMAGE CONSULTANTS PAGE 2 O F 5
Update settings to allow map page
- 3. 1. INTRODUCTION
Due to default security settings in Microsoft Internet Explorer, a problem may arise that the
map in PAPYRUS does not want to load, as typically can be seen in Figure 1: Error Page,
below. Solving the problem is fairly simple.
Figure 1: Error page
2. HOW TO UPDATE THE SETTINGS
Step 1:
Access to the map page has been restricted, due to default security settings in Microsoft
Internet Explorer. This is evident by the symbol at the bottom of the Internet
Explorer window.
Double click symbol, to allow a window to appear as can be seen in Figure 2:
Privacy Report, below.
© GLOBAL IMAGE CONSULTANTS PAGE 3 O F 5
Update settings to allow map page
- 4. Figure 2: Privacy Report
Step2:
From the Privacy Report, it is evident that the site:
http://196.25.207.16/gimap/mappage.aspx has been blocked. The map will not load
until this site has been added as a trusted site to your computer.
Click to highlight the site address http://196.25.207.16/gimap/mappage.aspx (which is
blocked) in the Privacy report.
Click on the button in the Privacy Report window, to activate
Privacy Policy Menu, as can be seen in Figure 3: Privacy Policy, below
Figure 3: Privacy Policy
© GLOBAL IMAGE CONSULTANTS PAGE 4 O F 5
Update settings to allow map page
- 5. Step 3:
On the Privacy Policy Menu, choose the option “Always allow the site to use cookies”.
Click the button to accept the option, followed by the
button on the Privacy Report Menu.
Step 4:
The Internet Explorer Page can now be refreshed, to finalise the steps, as is clear
from Figure 4: Map Page, blow. As indicated, a map will be loaded.
Figure 4: Map Page
You have now successfully added the Papyrus Map Page to your site settings. Further
note that these actions only need to be completed once, for the PAPYRUS Map page
to be active in future.
© GLOBAL IMAGE CONSULTANTS PAGE 5 O F 5
Update settings to allow map page