đ Kolkata Call Girls Shyam Bazar đ«đ«7001035870 Model escorts Service
Â
Replacement Canopy for Clayton Gazebo D71 M80441
1. Replacement Canopy for Clayton Gazebo
OWNER'S MANUAL
Product Code: D71 M80441
UPC Code: 7-6945575547-6
Vendor Item: C-I-138-2GZ
Date of Purchase:
_____ /_____ /_____
Receipt of Purchase:
Attach Here
See our extensive assortment of outdoor living products on-line at www.sears.com and www.kmart.com
2. PARTS
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
A (1) B (1)
Orignal Canopy Frame New Canopy Fabric
(not included in this package)
ACCESSORIES
Use the follwing parts from your orignal gazebo Use the follwing parts from the hardware
Ca (8) Cd (1)
Bolt Open Hex Wrench
Cb (8) Ce (1)
Nut Allen Wrench
Cc (8) Cf (1)
Metal Washer Assembly
Instructions Sheet
2
Gazebo Replacement Canopy
3. Special Warning
Assemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo is heavy. Use care when handing.
Assembly by four adults is recommended. The gazebo is not intended to be a permanent structure. Take it down during
high winds or it may be damaged.
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRIC
The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric
will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric
may render the flame-resistant properties ineffective.
ASSEMBLY INSTRUCTIONS
Fig. 3
Fig. 1
Cc A
Process of removing gazebo canopy Ca A
Cb B
1 Pull out the bars of the canopy frame (A) from the
pockets of original large canopy. See Fig. 1. Then
shor
t
remove all bolts (Ca), nuts (Cb), metal washers (Cc)
which attached on legs and orignal canopy frame (A).
A Ca
See Fig. 2 and Fig. 3. Cb
Cc Fig. 2
long
2 Pull out the short top crossbars of the canopy
frame (A) from the wind vent fabric. Then remove
old canopy fabric from the canopy frame (A).
See Fig. 4.
A
Fig. 4
Process of replacing new gazebo canopy
3 Attach the new canopy fabric (B) to the canopy
frame (A) by inserting the bars of the canopy
frame (A) through the holes of new the canopy
fabric (B). Then pull down the wind vent fabric of
new canopy fabric (B) and unfold the canopy
fabric (B) to the location. See Fig. 5.
NOTE: The middle of the canopy fabric short Fig. 5
side (with âshortâ lable) towards middle-length
bar of the canopy frame.
Gazebo Replacement Canopy
3
4. 4 Place the assembled canopy (A&B) onto legs and top
crossbars. Make sure each crossbar is between two
edges of the canopy. Line up holes insert a bolt (Ca) Fig. 7 Fig. 8
through an U shaped bracket, canopy frame (A), A
Cc A
a metal washer (Cc) and secure with a nut (Cb) for Ca B
each hole. See Fig. 6 and Fig. 7. Tighten all bolts and Cb
nuts. Slide each tip end of the canopy frame bar (A)
into each pocket. See Fig. 8. NOTE: Short side of the
canopy fabric (with âshortâ lables) towards short
crossbar.
A Ca
Cb shor
t
Cc
Fig. 6
long
Your gazebo with new canopy is now ready for use.
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
sears.com
Please refer to part numbers when reordering
For questions or comments about product:
Call toll-free: 800-457-4652
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Gazebo Replacement Canopy
4