Transportation Electrification Funding Strategy by Jeff Allen and Brandt Hert...
AUDI A4 B5 1.8L 1996 ELECTRICAL EQUIPMENT 96 1 center console switches
1. 96-1
Center console switches,
removing and installing
CAUTION!
Disconnect the battery Ground (GND) strap
before working on the electrical system.
Notes:
Before disconnecting the battery, determine the
correct coding for the anti-theft radio.
After reconnecting the battery, check and
activate the vehicle's electrical equipment
(radio, clock, comfort and convenience
features, etc.) as outlined in this Repair Manual
or the Owner's Manual.
Page 1 of 3Center console switches, removing and installing
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.1
2. 96-2
Switches, removing and installing
Removing
- Insert small screwdriver or flat plastic tool as shown, press against
opposite side of switch and pry off switch plate.
- Tape off area above switches or front of radio with masking tape, if
necessary.
Installing
- Pull switch out forward using standard or flat-nose pliers.
- Disconnect harness connector.
- Press switch plate onto switch so it engages audibly.
- Connect harness connector and press switch in by hand as far as
possible.
Page 2 of 3Center console switches, removing and installing
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.1
3. 96-3
Emergency flasher relay, location
The emergency flasher relay is integrated in the emergency flasher
switch.
- Removing and installing Page 96-2 .
Page 3 of 3Center console switches, removing and installing
11/20/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.EE01.96.1