THE WORLD’S FIRST RIFT DRIVEN® ELECTRIC ACTUATOR
For Part Turn & Multi-Turn Applications
The SmartAct®-1 electric valve actuator is the world’s first RIFT DRIVEN® product .
Its revolutionary British design has a single glass reinforced polypropylene housing that contains the RIFT motor system and gearbox. The SmartAct®-1 can be configured to produce a range of output torques up to 100Nm.
Smart, state of the art electronics provide accurate, reliable and repeatable performance characteristics and enables a comprehensive list of standard and optional features to be
offered. Optional extra cost features include failsafe and/ or modulating functionality; speed control and fieldbus communications are available to customer order.
At a time where energy consumption is becoming increasingly important to the world, the SmartAct®-1 actuator takes full advantage of the dramatic reduction in energy that the RIFT DRIVEN® system provides. This creates an electric actuator with the lowest energy usage figures available in the world market.
Standard:
- Universal power supply 12-300V
- Anti-condensation heater
- Over-torque protection
- Torque range 40, 60, 80, 100Nm
- SO5211 / EN15714-2 compliant
- Weatherproof
- Local controls
- 2 x M20 x 1.5 Cable entries
Options:
- Failsafe
- Modulating
- Fieldbus communications
- Speed control
- Data logging
- Torque profiling
- Solenoid Function
- 2 x 1/2” NPT Cable entries
- Of-Grid and Timer Facility
- Multi-Turn Function
MADE IN BRITAIN
The SmartAct®-1 electric actuator was conceived, designed, prototyped, and is being manufactured in Britain.
TH E RIFT DRIVEN® ADVANTAGE
RIFT is a new British innovation; significantly enhancing the motor characteristics resulting in a powerful, light, and yet energy efficient motor driven product.
HUGELY ENERGY EFFICIENT
A RIFT DRIVEN® product contains the RIFT technology that will transform motor driven systems in the future. They show weight and energy savings of over 75% compared to traditional motor driven systems.
In actuator comparison tests the SACO valve actuator is in fact over 90% more energy efficient than the market leading electric actuators it was compared with.
PID CONTROL
Combining PID control with a 10 bit magnetic electronic position sensing system, the SACO S m a r t a c t - 1 actuator gives very accurate positioning and timing capabilities. Part Turn or Multi-Turn applications can be configured with accuracy up to at least ¼ of a degree on most valves.
OPTIONAL SOLENOID FUNCTION
A huge advantage of the SACO actuator is that it is capable of very fast cycle times. This allows it to be used as a direct acting solenoid. Fitted to a full bore ball valve it eliminates the difficulties traditional solenoids face when used with dirty media.
2. PAY ATTENTION !!!
All of the following functionalities are in one actuator,
which can be activated on demand !!
3. 1 model
For all applications up to 100 Nm
Torque range 40, 60,
80, 100Nm
Manual operation
Position indication
ISO5211 / EN15714-2 compliantAngle or Multi-Turn Function
Universal power supply 12-300V
Over-torque protection
Anti-condensation heaterSpeed control
Solenoid Function
Data logging
Failsafe
Modulating
Fieldbus communications Of-Grid and Timer Facility
Hugely energy efficiënt Weatherproof Light weight
4. Universal power supply 12-300V
• AC(50/60Hz)DC: 12 – 30 Volts
• AC(50/60Hz)1ph: 24 & 85 – 300 Volts
Max. current DC: 200mA @ 24V
Max. current AC: 50mA @ 85V
Your complete system may be smaller due to the low current and
therefore cheaper build !!
5. ISO 5211 flange connection
SO5211 / EN15714-2
Flange Size: F03, F04 & F05 Flange Size: F07 & F10
Adapters:
• Output drive square 11 mm
• Output drive square 14 mm
• Output drive double D
• Output drive octagonal
Adapters:
• Output drive square 17 mm
• Output drive square 22 mm
• Output drive double D
• Output drive octagonal
Output drive orientation 0° or 45°
7. Torque range 40, 60, 80, 100Nm
The torque is adjustable by the distributor.
The standard 40 Nm electric drive is via Bluetooth and a code bought by the
distributor upgradable to 60 Nm, 80 Nm or 100 Nm.
The upgrade is currently done using a Windows program which for example runs on
a laptop or tablet. An android app is under development.
60 Nm
80 Nm
40 Nm
100 Nm
STOCK
8. Failsafe
Safe position on power failure
The following options are configurable:
Normally closed (NC)
Normally Open (NO)
Stay Put
% Open
Lifetime: 5 years
9. Solenoid Function
This function allows you to control SmartAct-1 if it is a solenoid valve:
Power connected valve open
Power off, valve closed
or
Latching
or
Power connected valve close
Power off, valve open
VoedingVoeding
Additional features to work more as solenoid valve:
Fail Safe: at power failure Normally Closed (NC) or Normally Open (NO)
Speed control: approx 0.9 seconds at 40 Nm and about 2 seconds to 100 Nm
10. Solenoid Function
Connections: equal
SmartAct with ball valve
Switching speed: approx 0.9 sec @ 40Nm
Failsafe: NC, NO (1 version)
No differential pressure required
Useable with dirty media
Standard position indicator
Standard position feedback
Cheaper at larger sizes
Dimensions: relatively large
Orifice: full bore
Manual operation: standard
Voeding
Solenoid
Switching Speed: High
Failsafe: NC, NO (2 versions)
Differential pressure required
Not to be used in dirty media
No position indicator
No position feedback
Pricey at larger sizes
Dimensions: compact
Orifice: reduced
Manual operation: Optional
11. Universele voedingsspanningSpeed control 90°:
Max. appr. 0.9 seconds at 40 Nm
Min. dribble, no max. time
The specified speed is independent of the load
and controlled by an internal PI controller.
Therefore the same with and without load.
Speed !!!!!
13. Over-torque protection
For some applications or valves, you can limit
the maximum torque to ensure that nothing will
be damaged.
Default setting is about 10% above the
maximum torque purchased.
Over-torque
15. Random installation
No oil lubrication
The SmartAct contains no oil, because the
gears are made of self-lubricating plastic.
The more the actuator is used, the smoother
it will run and the less noise it makes.
Because there is no oil in the drive, you can
also apply it upside down.
There is a 2 year warranty on the SmartAct
16. Hugely energy efficiënt
The RIFT DRIVEN® motor system saves about 75% by weight and energy.
Compared to other electric actuators the SmarAct saves on average around 90%
Max. current DC: 200mA @ 24V
Max. current AC: 50mA @ 85V
100% Duty cycle!!
Power supply with
solar cells possible !!
17. Modulating
Input signals for setpoint position: 0-10v DC, 0-20mA or 4-20mA
Output signals for Position feedback: 0-10v DC, 0-20mA or 4-20mA
The 10-bit contactless position sensor of the actuator adjusts itself using
the internal PI controller to the desired position with an accuracy of ¼ °.
Unnecessary frequent movement instigated by a constantly fluctuating
input signal is dampened by averaging formulae within the EPS programme
to prevent the motors running continuously.
This function is also compatible with the Failsafe feature.
18. Datalogging
Currently only available for the distributor:
• Number of cycles
Available for the valve manufacturer:
• Max. temperature
• Max. torque
• Torque profile over 90° of the valve (very interesting for the valve manufacturers)
user:
• App for i.a. data logging is under development
19. Manual operation
Manual control by means of the three buttons on the SmartAct.
• On request a closed lid without manual
• On request the manual control can be locked, so that it cannot be used
Red: Stationary = closed
Green: Rotary = opening
Green: Stationary = open
Red: Rotary = closing
23. To be released soon
0 – 35 NM
100 – 400 NM
Atex Zone 0, 1 of 2
Technically Zone 0 possible !!
Fieldbuses
• Profibus
• Modbus
Customer requirements can be taken into account for the further development
User App
Stainless Steel housing
Specials