Suche senden
Hochladen
Forti gate troubleshooting_guide_v0.10
•
0 gefällt mir
•
2,588 views
Phong Nguyễn
Folgen
Technologie
Melden
Teilen
Melden
Teilen
1 von 16
Jetzt herunterladen
Downloaden Sie, um offline zu lesen
Empfohlen
Nse4 fgt 6.0
Nse4 fgt 6.0
Salem Trabelsi
6.5.1.2 packet tracer layer 2 security instructor
6.5.1.2 packet tracer layer 2 security instructor
Salem Trabelsi
wifi_sw_birdview_v0.4
wifi_sw_birdview_v0.4
Lianghua (Leoh) Yang
18763980 ccna-lab-manual-640802-ii-2009-ii
18763980 ccna-lab-manual-640802-ii-2009-ii
Helder B. Martínez Peña
Readme
Readme
MOHMUSYAFFASHI
6.5.1.3 packet tracer layer 2 vlan security instructor
6.5.1.3 packet tracer layer 2 vlan security instructor
Salem Trabelsi
ccna-discowey-final-100
ccna-discowey-final-100
junkut3
5.5.1.2 packet tracer configure ios intrusion prevention system (ips) using...
5.5.1.2 packet tracer configure ios intrusion prevention system (ips) using...
Salem Trabelsi
Weitere ähnliche Inhalte
Was ist angesagt?
4.4.1.2 packet tracer configure ip ac ls to mitigate attacks-instructor
4.4.1.2 packet tracer configure ip ac ls to mitigate attacks-instructor
Salem Trabelsi
Mastering Microcontroller : TIMERS, PWM, CAN, RTC,LOW POWER
Mastering Microcontroller : TIMERS, PWM, CAN, RTC,LOW POWER
FastBit Embedded Brain Academy
Network Docs
Network Docs
Sify Technologies
Best practices for catalyst 4500 4000, 5500-5000, and 6500-6000 series switch...
Best practices for catalyst 4500 4000, 5500-5000, and 6500-6000 series switch...
abdenour boussioud
4.4.1.3 packet tracer configuring a zone-based policy firewall (zpf) instru...
4.4.1.3 packet tracer configuring a zone-based policy firewall (zpf) instru...
Salem Trabelsi
Rodrigo Almeida - Microkernel development from project to implementation
Rodrigo Almeida - Microkernel development from project to implementation
Felipe Prado
Important cisco-chow-commands
Important cisco-chow-commands
ssusere31b5c
Zenith Networks: Jump Start JUNOS
Zenith Networks: Jump Start JUNOS
Zenith Networks
Configure Cisco Routers for Syslog, NTP, and SSH Operations
Configure Cisco Routers for Syslog, NTP, and SSH Operations
Kelson Silva
Ipso vrrp troubleshooting
Ipso vrrp troubleshooting
Pavan Kumar
JUNOS - Monitoring and Troubleshooting
JUNOS - Monitoring and Troubleshooting
Zenith Networks
04 module operating & configuring ios
04 module operating & configuring ios
Asif
2.5.1.2 packet tracer configure cisco routers for syslog, ntp, and ssh oper...
2.5.1.2 packet tracer configure cisco routers for syslog, ntp, and ssh oper...
Salem Trabelsi
Chp10 sw constr
Chp10 sw constr
siddu kadiwal
TekIVR Manual
TekIVR Manual
Yasin KAPLAN
Debugging 2013- Jesper Brouer
Debugging 2013- Jesper Brouer
Mediehuset Ingeniøren Live
Iuwne10 S06 L03
Iuwne10 S06 L03
Ravi Ranjan
Juniper policy based filter based forwarding
Juniper policy based filter based forwarding
Mars Chen
Network topology by essay corp uk
Network topology by essay corp uk
Johnsmith5188
Was ist angesagt?
(19)
4.4.1.2 packet tracer configure ip ac ls to mitigate attacks-instructor
4.4.1.2 packet tracer configure ip ac ls to mitigate attacks-instructor
Mastering Microcontroller : TIMERS, PWM, CAN, RTC,LOW POWER
Mastering Microcontroller : TIMERS, PWM, CAN, RTC,LOW POWER
Network Docs
Network Docs
Best practices for catalyst 4500 4000, 5500-5000, and 6500-6000 series switch...
Best practices for catalyst 4500 4000, 5500-5000, and 6500-6000 series switch...
4.4.1.3 packet tracer configuring a zone-based policy firewall (zpf) instru...
4.4.1.3 packet tracer configuring a zone-based policy firewall (zpf) instru...
Rodrigo Almeida - Microkernel development from project to implementation
Rodrigo Almeida - Microkernel development from project to implementation
Important cisco-chow-commands
Important cisco-chow-commands
Zenith Networks: Jump Start JUNOS
Zenith Networks: Jump Start JUNOS
Configure Cisco Routers for Syslog, NTP, and SSH Operations
Configure Cisco Routers for Syslog, NTP, and SSH Operations
Ipso vrrp troubleshooting
Ipso vrrp troubleshooting
JUNOS - Monitoring and Troubleshooting
JUNOS - Monitoring and Troubleshooting
04 module operating & configuring ios
04 module operating & configuring ios
2.5.1.2 packet tracer configure cisco routers for syslog, ntp, and ssh oper...
2.5.1.2 packet tracer configure cisco routers for syslog, ntp, and ssh oper...
Chp10 sw constr
Chp10 sw constr
TekIVR Manual
TekIVR Manual
Debugging 2013- Jesper Brouer
Debugging 2013- Jesper Brouer
Iuwne10 S06 L03
Iuwne10 S06 L03
Juniper policy based filter based forwarding
Juniper policy based filter based forwarding
Network topology by essay corp uk
Network topology by essay corp uk
Ähnlich wie Forti gate troubleshooting_guide_v0.10
Pandora FMS: Hyper V Plugin
Pandora FMS: Hyper V Plugin
Pandora FMS
Tp link error codes
Tp link error codes
PPCChamp - Digital Marketing & Consulting Company
Merged document
Merged document
sreeja_16
business
business
Gajendra Saini
How to-troubleshoot-nat-related-issues
How to-troubleshoot-nat-related-issues
Madhu Thamatam
Rt2870 Software Release Note For Windows Ce
Rt2870 Software Release Note For Windows Ce
guesta5887e6b
26.1.7 lab snort and firewall rules
26.1.7 lab snort and firewall rules
Freddy Buenaño
OpenWRT manual
OpenWRT manual
fosk
Bounty bout 0x01 - WebRTC edition
Bounty bout 0x01 - WebRTC edition
Sandro Gauci
Developing Real-Time Data Pipelines with Apache Kafka
Developing Real-Time Data Pipelines with Apache Kafka
Joe Stein
Backtrack Manual Part4
Backtrack Manual Part4
Nutan Kumar Panda
Esm rel notes_6.0cp1
Esm rel notes_6.0cp1
Protect724v3
Legacy Lowdown - Options When Migrating Solaris Applications
Legacy Lowdown - Options When Migrating Solaris Applications
AppZero
Fcm rapid-install-11122-1634210
Fcm rapid-install-11122-1634210
raman pattanaik
Computer technicians-quick-reference-guide
Computer technicians-quick-reference-guide
Shathees Rao
PCD - Process control daemon - Presentation
PCD - Process control daemon - Presentation
haish
IBM X346 User guide
IBM X346 User guide
pgpclient01
6 profiling tools
6 profiling tools
videos
9Tuts.Com New CCNA 200-120 New CCNA New Questions 2
9Tuts.Com New CCNA 200-120 New CCNA New Questions 2
Lori Head
AIX Advanced Administration Knowledge Share
AIX Advanced Administration Knowledge Share
.Gastón. .Bx.
Ähnlich wie Forti gate troubleshooting_guide_v0.10
(20)
Pandora FMS: Hyper V Plugin
Pandora FMS: Hyper V Plugin
Tp link error codes
Tp link error codes
Merged document
Merged document
business
business
How to-troubleshoot-nat-related-issues
How to-troubleshoot-nat-related-issues
Rt2870 Software Release Note For Windows Ce
Rt2870 Software Release Note For Windows Ce
26.1.7 lab snort and firewall rules
26.1.7 lab snort and firewall rules
OpenWRT manual
OpenWRT manual
Bounty bout 0x01 - WebRTC edition
Bounty bout 0x01 - WebRTC edition
Developing Real-Time Data Pipelines with Apache Kafka
Developing Real-Time Data Pipelines with Apache Kafka
Backtrack Manual Part4
Backtrack Manual Part4
Esm rel notes_6.0cp1
Esm rel notes_6.0cp1
Legacy Lowdown - Options When Migrating Solaris Applications
Legacy Lowdown - Options When Migrating Solaris Applications
Fcm rapid-install-11122-1634210
Fcm rapid-install-11122-1634210
Computer technicians-quick-reference-guide
Computer technicians-quick-reference-guide
PCD - Process control daemon - Presentation
PCD - Process control daemon - Presentation
IBM X346 User guide
IBM X346 User guide
6 profiling tools
6 profiling tools
9Tuts.Com New CCNA 200-120 New CCNA New Questions 2
9Tuts.Com New CCNA 200-120 New CCNA New Questions 2
AIX Advanced Administration Knowledge Share
AIX Advanced Administration Knowledge Share
Kürzlich hochgeladen
UiPath Solutions Management Preview - Northern CA Chapter - March 22.pdf
UiPath Solutions Management Preview - Northern CA Chapter - March 22.pdf
DianaGray10
UiPath Studio Web workshop series - Day 6
UiPath Studio Web workshop series - Day 6
DianaGray10
Cybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptx
GDSC PJATK
Secure your environment with UiPath and CyberArk technologies - Session 1
Secure your environment with UiPath and CyberArk technologies - Session 1
DianaGray10
Do we need a new standard for visualizing the invisible?
Do we need a new standard for visualizing the invisible?
SANGHEE SHIN
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
IES VE
Basic Building Blocks of Internet of Things.
Basic Building Blocks of Internet of Things.
YounusS2
AI Fame Rush Review – Virtual Influencer Creation In Just Minutes
AI Fame Rush Review – Virtual Influencer Creation In Just Minutes
Md Hossain Ali
COMPUTER 10 Lesson 8 - Building a Website
COMPUTER 10 Lesson 8 - Building a Website
dgelyza
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
DianaGray10
Introduction to Matsuo Laboratory (ENG).pptx
Introduction to Matsuo Laboratory (ENG).pptx
Matsuo Lab
Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™
Adtran
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and Hazards
Seth Reyes
PicPay - GenAI Finance Assistant - ChatGPT for Customer Service
PicPay - GenAI Finance Assistant - ChatGPT for Customer Service
Renan Moreira de Oliveira
Machine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdf
Aijun Zhang
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UbiTrack UK
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
shyamraj55
9 Steps For Building Winning Founding Team
9 Steps For Building Winning Founding Team
Adam Moalla
Artificial Intelligence & SEO Trends for 2024
Artificial Intelligence & SEO Trends for 2024
D Cloud Solutions
Crea il tuo assistente AI con lo Stregatto (open source python framework)
Crea il tuo assistente AI con lo Stregatto (open source python framework)
Commit University
Kürzlich hochgeladen
(20)
UiPath Solutions Management Preview - Northern CA Chapter - March 22.pdf
UiPath Solutions Management Preview - Northern CA Chapter - March 22.pdf
UiPath Studio Web workshop series - Day 6
UiPath Studio Web workshop series - Day 6
Cybersecurity Workshop #1.pptx
Cybersecurity Workshop #1.pptx
Secure your environment with UiPath and CyberArk technologies - Session 1
Secure your environment with UiPath and CyberArk technologies - Session 1
Do we need a new standard for visualizing the invisible?
Do we need a new standard for visualizing the invisible?
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
Basic Building Blocks of Internet of Things.
Basic Building Blocks of Internet of Things.
AI Fame Rush Review – Virtual Influencer Creation In Just Minutes
AI Fame Rush Review – Virtual Influencer Creation In Just Minutes
COMPUTER 10 Lesson 8 - Building a Website
COMPUTER 10 Lesson 8 - Building a Website
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
Connector Corner: Extending LLM automation use cases with UiPath GenAI connec...
Introduction to Matsuo Laboratory (ENG).pptx
Introduction to Matsuo Laboratory (ENG).pptx
Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and Hazards
PicPay - GenAI Finance Assistant - ChatGPT for Customer Service
PicPay - GenAI Finance Assistant - ChatGPT for Customer Service
Machine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdf
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
UWB Technology for Enhanced Indoor and Outdoor Positioning in Physiological M...
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
Anypoint Code Builder , Google Pub sub connector and MuleSoft RPA
9 Steps For Building Winning Founding Team
9 Steps For Building Winning Founding Team
Artificial Intelligence & SEO Trends for 2024
Artificial Intelligence & SEO Trends for 2024
Crea il tuo assistente AI con lo Stregatto (open source python framework)
Crea il tuo assistente AI con lo Stregatto (open source python framework)
Forti gate troubleshooting_guide_v0.10
1.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 1 - FortiGate Troubleshooting Guide
2.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 2 - © Copyright 2006 Fortinet, Inc. All rights reserved. No part of this publication including text, examples, diagrams or illustrations may be reproduced, transmitted, or translated in any form or by any means, electronic, mechanical, manual, optical or otherwise, for any purpose, without prior written permission of Fortinet, Inc. Trademarks Dynamic Threat Prevention System (DTPS), APSecure, FortiASIC, FortiBIOS, FortiBridge, FortiClient, FortiGate, FortiGate Unified Threat Management System, FortiGuard, FortiGuard - Antispam, FortiGuard-Antivirus, FortiGuard-Intrusion, FortiGuard-Web, FortiLog, FortiAnalyzer, FortiManager, Fortinet, FortiOS, FortiPartner, FortiProtect, FortiReporter, FortiResponse, FortiShield, FortiVoIP, and FortiWiFi are trademarks of Fortinet, Inc. in the United States and/or other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Regulatory compliance FCC Class A Part 1 5 CSA/CUS
3.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 3 - Table of content 1 Ticket creation requirements......................................................................................4 2 Initial troubleshooting steps.......................................................................................6 2.1 IPsec VPN issues ................................................................................................6 2.1.1 The tunnel fails to connect ............................................................................6 2.1.2 The client fails to retrieve its IP through DHCP ...........................................6 2.1.3 Problems with traffic going through the tunnel...........................................7 2.2 HA issues ............................................................................................................8 2.2.1 Synchronization issues..................................................................................8 2.2.2 Rebuilding a cluster........................................................................................8 2.3 Transparent mode issues..................................................................................9 2.4 Anti-Spam issues .............................................................................................10 2.4.1 Which ban ned word is being matched?......................................................10 2.4.2 Other anti-spam issues................................................................................10 2.5 Web filtering issues..........................................................................................11 2.5.1 Which banned word is being matched?......................................................11 2.5.2 Other web filtering issues............................................................................11 2.6 FortiGate blocking traffic .................................................................................12 2.7 FSAE issues.......................................................................................................12 2.7.1 The FortiGate can’t retrieve the list of groups...........................................12 2.8 Unstable unit ....................................................................................................12 2.9 Freezing / Crashing unit ..................................................................................13 2.10 Other troubleshooting tips...............................................................................14 2.10.1 Using packet sniffer .................................................................................14 2.10.2 Tracking sessions with the session filter................................................14 2.10.3 Tracking sessions with the debug flow...................................................14 2.10.4 Testing authentication .............................................................................14 2.10.5 Other useful commands...........................................................................15 2.11 Hardware issues...............................................................................................16
4.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 4 - 1 Ticket creation requirements If you are a Fortinet Partner, we strongly recommend you to open your tickets using your Partner account. If you don’t do so, your tickets are logged by the FortiCare application as end-users tickets and therefore you loose the benefits of being a partner. In order for Fortinet Technical Support to provide you with the quickest and best quality of support, we would recommend that a ticket be initially opened with: 1. A clear problem description A ticket must deal with a single issue. Do not hesitate and create several tickets when reporting several issues on the same unit. When possible, the description should mention the working scenario and the non- working scenario. When related to a complex configuration, the description should mention the firewall policies and the protection profiles affected by the problem. 2. The problem history The initial description must indicate: • If the unit has worked p roperly before with the same configuration • If the problem appeared after an upgrade. If so, which firmware was previously running • If the problem appeared after a configuration change. If so, which settings have been modified • If other versions have been tested, please indicate the working and non working firmwares 3. A network diagram A detailed network diagram must indicate: • Each configured Fortinet device interface (including the interface used for management). • All IPs and netmasks of each interface and attached host(s). • The traffic flow and type, which is causing the problem. Indicate the source and destination devices. If the responsible traffic flow is not known, identify all traffic flows of the concerned protocol. For example, detail the outgoing and in coming SMTP traffic flow, to and from the email client. • Identify any relays/proxies/secondary servers which might be used in your network layout and their usage. For example, whether a web/ftp client is configured to first access a proxy, or if two SMTP email servers are relaying emails to each other. • Identify whether any load balancers are being used, and for which protocols/ports. • For a transparent mode issue, a layer 2 diagram is required as well.
5.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 5 - 4. The configuration file The one provided must be the latest one. In case of a working and a non -working scenario, the configuration file provided must be the one of the non-working scenario. When the problem appeared after an upgrade, it is recommended to also provide the configuration that was running properly before the upgrade. When the problem is related to units running in HA mode, it is recommended to provide the HA settings of the slave unit. They can be retrieved from the slave’s cli with the command #get sys ha When the problem is related to a FortiClient dialup user, please provide us with the FortiClient version and an export of the FortiClient settings (.vpl file). 5. The debug log of the unit It can be retrieved under System > Maintenance > Backup & Restore > Advanced. When the problem is related to units running in HA mode, the debug log of the master and the slave units must be submitted. They can be retrieved under System > Config > HA 6. A reproduction scenario In case the problem can be reproduced, please indicate the steps one has to go through to reproduce and therefore troubleshoot the problem. 7. A description and the results of the troubleshooting steps already achieved Please mention any troubleshooting action already performed and its result. The next part will guide you through common debug outputs that can help you troubleshooting an issue. Please provide the outputs of these debug commands upon ticket creation. You should clearly indicate how each debug was retrieved. For example: • The trace sniff_ok.txt was retrieved using the configuration file named config_ok.cfg and accessing web site www.fortinet.com • The trace sniff_ko.txt was retrieved using the configuration file named config_ko.cfg and accessing web site www.fortinet.com
6.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 6 - 2 Initial troubleshooting steps 2.1 IPsec VPN issues 2.1.1 The tunnel fails to connect In such cases, please provide us with the following debug outputs: Ø The ike debug output 1. Enable debug with: #diag debug en #diag debug console timestamp en #diag debug app ike –1 When other working VPN tunnels generate ike debug as well, you can filter your debug by specifying the public IP of the remote peer. #diag debug app ike –1 x.x.x.x 2. Connect the tunnel and capture all outputs 3. Disable debug with #diag debug dis #diag debug console timestamp dis #diag debug app ike 0 Ø A sniffer trace 1. Start a sniffer with #diag sniff packet interfaceName ‘host x.x.x.x’ 3 Where x.x.x.x is the public IP of the remote gateway or dialup client 2. Connect the tunnel and capture all outputs 3. Stop the sniffer with ctrl+c and verify that your trace is clean (see section Using packet sniffer). 2.1.2 The client fails to retrieve its IP through DHCP In such cases, please provide us with the following debug outputs: Ø The dhcp debug output 1. Enable debug with: #diag debug en #diag debug console timestamp en #diag debug app dhcprelay 7-> if using an IPsec DHCP relay #diag debug app dhcps 7 -> if using an IPsec DHCP sever 2. Connect the tunnel and capture all outputs 3. Disable debug with #diag debug dis #diag debug console timestamp dis #diag debug app dhcprelay 0 #diag debug app dhcps 0 Ø A sniffer trace As the external interface only sees encrypted traffic it is exceptionally indicated to sniff on all interfaces with the keyword ‘any’. 1. Start a sniffer with #diag sniff packet any 'udp port 67 or udp port 68' 6 2. Connect the tunnel and capture all outputs 3. Stop the sniffer with ctrl+c
7.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 7 - NB: In a setup with a DHCP relay, you can additionally sniff on the interface where your DHCP server sits. 2.1.3 Problems with traffic going through the tunnel In such cases, please mention clearly the name of the tunnel that is affected. Also, please provide us with the following debug information: Ø Retrieve information about active tunnels with: #diag vpn tunnel list Repeat this command 5 times with 5 sec interval time while your are trying to send traffic through the tunnel. #diag debug en #diag vpn gw list Ø Sniffer traces Please take 2 sniffer traces simultaneously at both ends of the tunnel. In case of a site to site, please sniff in verbose 3 at both ends while you try sending traffic into the tunnel. In case of a dialup, you can sniff in the FortiClient virtual adapter on one side (with Ethereal for example) and use the FortiGate embedded sniffer on the FortiGate side.
8.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 8 - 2.2 HA issues 2.2.1 Synchronization issues Please provide us with: Ø The synchronization error message It can be retrieved from the slave console port and should look like: slave is not in sync with master, sequence:0. (type 0x3) If you have no access to the console, this message can also be retrieved by enabling the following debug on the slave unit: #diag debug en #diag debug app hatalk 255 This debug can then be disabled with: #diag debug dis #diag debug app hatalk 0 Ø The following debug outputs In case the slave unit continuously reboots, we recommend you to stop synchronization prior to retrieving these outputs. To do so, connect to the slave unit and type '#exec ha synchro stop'. Note that you must then type '#exec ha synchro start' when you wish to restart synchronization. Then retrieve the following outputs on BOTH the master and the slave units #get sys sta #get sys perf status #get sys ha #diag sys ha status #diag sys ha dump 2 #diag sys ha dump 3 #diag sys ha showcs #diag sys ha showcs 1 #diag sys ha showcs 2 #diag sys ha showcs 3 #diag netl dev list #diag hard dev nic <HAportName> #show full-configuration NB: The slave unit can be reached from the master with the command #exec ha manage slave_id NB2: When the command ‘show full-configuration’ breaks the output with the option ‘more’, we would recommend you to set the following option: #config system console #set output standard #end 2.2.2 Rebuilding a cluster In case you wish to build a cluster or try to recover from a synchronization issue. 1. Disconnect the slave unit from the cluster and reset it to factory defaults 2. On the master unit, modify the HA settings to keep only the minimum HA parameters: a. group -id
9.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 9 - b. group -name c. password d. unit priority e. mode f. hbdev In particular make sure that port monitoring settings are all disabled. 3. On the slave unit, configure only these minimum HA parameters 4. Reconnect the slave unit. Note that it may reboot once when synchronizing. 2.3 Transparent mode issues Please provide us with the following details when troubleshooting a transparent mode issue: Ø MAC addresses details Please add to your Layer2 network diagram the MAC addresses of the hosts involved in the setup. When reading a sniffer trace taken from a transparent mode scenario, Fortinet Support needs to map these MAC addresses to the appropriate devices. Also, please indicate when VRRP/HSRP or load balancing / fail over mechanisms are used. Ø Dump the bridge information with: #diagnose netlink brctl list Ø Dump the vdom bridge forwarding table with: #diagnose netlink brctl name host <vd_name>.b where <vd_name> is the virtual domain name Ø Sniffer traces When you experience traffic problems, please take 2 sniffer traces simultaneously on the internal and external interfaces. These traces must be captured in verbose 3.
10.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 10 - 2.4 Anti-Spam issues For such issues, please provide a detailed diagram of your mail traffic flow. 2.4.1 Which banned word is being matched? In such cases, please use the following cli command: # diag spamfilter bword matchfilter '<logstring>' Where <logstring> is the group of numbers read from the end of the log entry. 2.4.2 Other anti-spam issues Please dump the following outputs: Ø Checking and monitoring proxy activity #diag debug en #diag debug app smtp 3 #diag test app smtp 4 #diag test app smtp 44 #diag test app smtp 444 NB: the example is given for SMTP but the same applies for POP3 and IMAP. Ø Checking FortiGuard #diag debug en #diag debug app spamfilter 3 #diag spamfilter fortishield statistics list
11.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 11 - 2.5 Web filtering issues For such issues, please provide a detailed diagram of your web traffic flow. Don’t forget to mention any proxy or load balancing device. 2.5.1 Which banned word is being matched? In such cases, please use the following cli command: #diag webfilter bword matchfilter '<logstring>' Where <logstring> is the group of numbers read from the end of the log entry. 2.5.2 Other web filtering issues Please dump the following outputs: Ø Checking and monitoring proxy activity: #diag debug en #diag debug app http 3 #diag test app http 4 #diag test app http 4 #diag test app http 444 Ø Checking FortiGuard #diag debug en #diag debug app urlfilter 3 #diag webfilter fortiguard statistics list
12.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 12 - 2.6 FortiGate blocking traffic In this scenario, please gather the output of: Ø The packet sniffer. Sniff simultaneously on both the internal and external interfaces Ø The session filter Ø The debug flow Further details regarding the usage of above commands can be found in section 2.10 2.7 FSAE issues For any FSAE issue, please provide us with the following details: Ø Fortigate firmware version: ex. 3.00MR4 Ø FSAE version: ex. 3.0.018 Ø AD Server version: ex. Windows2003 server Ø Client workstation details: OS: WindowsXP sp2 Hardware: ex. Dell Latitude 620 2.7.1 The FortiGate can’t retrieve the list of groups When using the FSAE feature, the list of AD groups should appear in the GUI under ‘User > Windows AD’. If the list is empty: 1. Start a sniffer to capture the traffic exchanged between the AD server and the FortiGate 2. From a command line, type: #exec fsae refresh 2.8 Unstable unit In such cases, please dump the following outputs: #get sys sta #get sys perf status #diag sys top 1 100 àlet run for 10-15s and escape pressing ‘q’ #diag netl dev list #diag netl int list #diag hard dev nic interfaceName # diag hard sys mem If your units run in cluster, above commands must be retrieved on both devices. Also, please retrieve as well: #diag sys ha status #get sys ha
13.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 13 - 2.9 Freezing / Crashing unit In such cases, please go through the following steps and provide us with the results: Ø LCD check When applicable to your FortiGate model, please indicate whether the LCD panel is frozen or responsive. Ø Management traffic check Does the unit reply to echo requests? Can you manage it through the GUI? Can you manage it through the cli? Ø Console port check Is the console port responsive? Ø Kernel crash debug 1. Enable debug with: #diag debug en #diag debug console timestamp en #diag debug kernel level 5 2. Connect a PC to the console port and log all information being printed to the HyperTerminal.
14.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 14 - 2.10Other troubleshooting tips 2.10.1 Using packet sniffer http://kc.forticare.com/default.asp?id=1186&SID=&Lang=1 All traces provided to support must be provided in verbose 3. Make sure that no packet was dropped by kernel. To do so, verify the last line being displayed when you stop the trace. 10858 packets received by filter 0 packets dropped by kernel When packets are dropped, try a more specific filter. Always sniff specifying the interface name, in other words, avoid using ‘any’. When not possible, sniff with ‘any’ but in verbose 6 #diag sniff packet any ‘filter’ 6 In order to sniff on a pppoe interface, use ppp0 as the interface name. If you have several pppoe interfaces it will be pppx where x is the appropriate index. When sniffing on an A-A cluster, to not forget to sniff on BOTH the master and the slave unit interfaces. 2.10.2 Tracking sessions with the session filter From the GUI, you can lookup for a session under: System > Status > Sessions > Details From the cli: 1. First set your filters with #diag sys session filter … 2. Print the sessions matching your filter with: #diag sys session list 2.10.3 Tracking sessions with the debug flow From the cli, you can track your traffic using the following commands: 1. Enable debug with #diag debug en 2. Set your filters with #diag debug flow filter … 3. Then type: #diag debug flow show console en #diag debug flow show function-name en #diag debug flow trace start 100 (to get 100 lines) 4. Generate the traffic and capture the output 2.10.4 Testing authentication These cli commands can help you test your radius or ldap server: #diag test auth rad <server_name> <chap | pap | mschap | mschap2> <username> <pwd> #diag test authserver ldap server <server_name> <username> <pwd>
15.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 15 - When experiencing authentication issues with a radius or LDAP server, please take a sniffer trace of the authentication traffic flowing between the FortiGate and the server. 2.10.5 Other useful commands 1. IP addresses #diag ip address list Displays all IP addresses assigned to interfaces including VIPs and IP pools. 2. ARP table #diag ip arp list Display the FortiGate unit ARP cache. 3. Routing table #diag ip route list Display the current routing table in the kernel. All routing decisions depend on this table. The kernel routing table is updated dynamically as the routing configuration or dynamic routing changes. 4. Resources usage #diag sys top 1 100 From left to right, the columns are: process name process id CPU usage memory usage #diag sys kill signal_number process_id As signal_number you can use for example: 9 as SIGKILL 15 as SIGTERM 5. PPPoE interface #diag debug en #diag debug app ppp 3 This debug is useful for the F60DSL models 6. Interface status #diag hard dev nic portName
16.
FortiGate Troubleshooting Guide ©
Fortinet Inc, 2006 Version 0.1 0 - 16 - 2.11Hardware issues For hardware issues, please refer to Article 1067 on the Knowledge Center and follow the link to the Hardware Troubleshooting Page Whenever you perform a maintenance operation through the console port, please log all outputs being printed. These logs are useful information to provide when logging a ticket for a hardware issue. For any RMA ticket, please make sure that the following information are provided upon ticket creation: 1. The output of the HQIP test 2. A console capture of the boot process if the unit does not boot properly 3. The output of any maintenance operation that you have performed while trying to recover
Jetzt herunterladen