5. KWIKfeas facilitates the preparation of financial feasibility studies for property developments. The application dramatically reduces the time required in preparing, assessing or fine-tuning the feasibility of a new development and offers a professional presentation incorporating cash flows, graphs and reports presented in a format which can be modified to suit your image and needs. This product is an invaluable tool for property developers, financial institutions, quantity surveyors, architects, project managers, property administrators and agents.
6.
7.
8. The e JBCC SERVICE forms a convenient and comprehensive professional on-demand contract document and information service. The use of the JBCC Forms of Contract have increased substantially over the last few years and Government commitment to use them bodes well for greater uniformity.
SmartArt custom animation effects: upward arrow process(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click Upward Arrow (sixth row, third option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bulleted list below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Colorful click Colorful Range - Accent Colors 3 to 4 (third option from the left).Click More, and then under Best Match for Document click Intense Effect (fifth option from the left).On the Home tab, in the Font group, select Calibri from the Font list, and then select 24 from the Font Size list.Select the text in the first text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickOliveGreen, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the text in the second text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickAqua, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the text in the third text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickPurple, Accent 4, Darker 25% (fifth row, eighth option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Under Modify: Wipe, in the Direction list, select From Left.Under Modify: Wipe, in the Speed list, select Fast.Also in the Custom Animation task pane, select the wipe effect. Click the arrow to the right of the wipe effect, and then click Effect Options. In the Wipe dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the wipe effect to expand the contents of the list of effects.Also in the Custom Animation task pane, select the second wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select With Previous. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the third wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select With Previous. Under Modify: Descend,in the Speed list, select Very Fast.Click the arrow to the right of the third wipe effect, and then click Timing. In the Descend dialog box, on the Timing tab, in the Delay box, enter 0.5.Also in the Custom Animation task pane, select the fourth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the fifth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the sixth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the seventh wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 39%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Lighter 60%(third row, seventh option from the left).To increase the size of the SmartArt graphic so that it spans the entire slide, do the following:On the slide, select the graphic. Point to the top right corner of the graphic border, until a two-headed arrow appears. Drag the top right corner of the graphic border into the top right corner of the slide. Point to the bottom left corner of the graphic border, until a two-headed arrow appears. Drag the bottom left corner of the graphic border into the bottom left corner of the slide.
SmartArt custom animation effects: basic radial(Intermediate)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Basic Radial (sixth row, second option from the left), and then click OK to insert the graphic into the slide.On the slide, select the SmartArtgraphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullet, enter the text for the center circle of the graphic. In the second-level bullets, enter the text for all the other shapes in the SmartArt graphic. With the SmartArt graphic still selected, on the Design tab, in the Themes group, click Colors, and then select Median. Under SmartArtTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5”.In the ShapeWidth box, enter 7.5”.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click SmartArtStyles, and then under Best Match for Document select IntenseEffect (fifth option from the left).On the Home tab, in the Font group, click the button next to FontColor, and then under ThemeColors select Black, Text 1 (first row, second option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Surface, do the following:In the Material list, under SpecialEffect, select SoftEdge (first row, second option from the left).In the Lighting list, under Neutral, select Harsh (first row, fourth option from the left).In the Angle box, enter 30°.Press and hold CTRL, and select all five shapes in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, in the Presets list, under Outer select OffsetBottom (first row, second option from the left), and then do the following:In the Transparency box, enter 65%.In the Size box, enter 103%.In the Blur box, enter 9 pt.In the Angle box, enter 90°.In the Distance box, enter 3 pt.To reproduce the SmartArt effects on this slide, do the following:On the slide, select the center circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.On the slide, select the top circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 20 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 15 pt.Press and hold SHIFT, and then on the top circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 20.Drag the top circle approximately 0.5” to the right.Select the right circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Gold, Accent 4 (first row, eighth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.Press and hold SHIFT, and then on the right circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 28 pt.Drag the right circle slightly toward the right corner of the slide.One the slide, select the bottom circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Green, Accent 5 (first row, ninth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and then on the bottom circle, drag a corner adjustment handle away from the center to increase the size.On the Home tab, in the Font group, in the Font Size box, enter 28.On the slide, select the left circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Olive Green, Accent 3 (first row, seventh option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 30 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 30 pt.Press and hold SHIFT, and then on the left circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 40, and then click Bold.Drag the top circle slightly toward the bottom of the slide.To reproduce the line effects on this slide, do the following:Press and hold CTRL, and then select each of the four lines connecting the circles in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following:In the Type list, select Linear.In the Direction list, select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%.Also in the FormatShape dialog box, clickLineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.5 pt.In the Dashtype list, select RoundDot (second option from the top).To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Animations group, click CustomAnimation. On the slide, select the SmartArt graphic, and then in the CustomAnimation task pane, to the following:Click AddEffect, point to Entrance, and select MoreEffects. In the AddEntranceEffect dialog box, under Moderate, select Zoom.Click the arrow to the right of the zoom entrance effect, and then select EffectOptions. In the Zoom dialog box, do the following:On the Effect tab, in the Zoom list, select In from ScreenCenter.On the Timing tab, in the Speed list, select 1 seconds (Fast). On the SmartArtAnimation tab, in the Group graphic list, select From center one by one. In the CustomAnimation task pane, expand the contents of the list by clicking the double arrow under the zoom entrance effect, and then do the following:Select the first effect (zoom entrance effect), and under Modify: Zoom, in the Start list, select WithPrevious.Select the second effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the second effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box dothe following:On the Effect tab, in the Direction list, select FromBottom.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the fourth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the fourth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the sixth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the sixth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the eighth effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the eighth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromRight.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1 (first row, second option from the left).
SmartArt custom animation effects: vertical picture list(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, double-click Vertical Picture List (fourth row, first option from the left) to insert the graphic into the slide. To create a fourth shape in the graphic, select the third shape from the top, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and then click AddShapeBefore. Repeat this process to create a fifth shape.Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 6.38”.In the Width box, enter 7.91”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, click each of the second-level bullets and then press DELETE until there are only three first-level bullets remaining (one for each shape). Enter text for each shape into the first-level bullets.On the slide, select the graphic. On the Home tab, in the Font group, select 14 from the Font Size list.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click More,and then under Best Match for Document click Moderate Effect (fourth option from the left). On the Design tab, in the Themes group, click Colors, and then click Civic. (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the theme colors will be applied to all of the slides.) Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click Change Colors, and then under Colorful click Colorful Range – Accent Colors 3 to 4 (third option from the left). Click each of the five picture placeholders in the graphic, and then in the Insert Picture dialog box, select a picture and click Insert.Press and hold CTRL, and then select all five of the pictures on the slide. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles clickRoundDiagonalCornerRectangle (ninth option from the left).Under SmartArtTools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then do the following:Under Glow Variations, select Accent color 1, 5 pt glow (first row, first option from the left).Point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left).Press and hold CTRL, and then select all of the larger rounded rectangles. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles clickRoundDiagonalCornerRectangle (ninth option from the left). To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the Custom Animation taskpane, do the following:Click Add Effect, point to Entrance, and then clickMoreEffects. In the Add Entrance Effect dialog box, underSubtle, clickFade,and then click OK. Under Modify: Fade, in the Speed list, selectFast. Click Add Effect, point to Motion Paths, and then clickRight. Under Modify: Right, do the following:In the Start list, selectWith Previous.In the Speed list, select Fast. On the slide, right-click the right motion path and then click ReversePathDirection.Press and hold CTRL, and then select the two animationeffects in the Custom Animation task pane. Click the arrow to the right of one of those effects, and then clickEffectOptions. In theEffect Options dialog box, on the SmartArtAnimation tab, in the Group Graphic list, select One by One.Also in the CustomAnimation task pane, do the following:Click the double arrows under each effect to expand the list of effects.Select the first animation effect (fade effect for the first rectangle). Under Modify: Fade, in the Start list, select With Previous.Also in the CustomAnimation task pane, select the 11th animation effect (motion path for the first picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT to constrain the path to a straight horizontal line, and then drag the starting point to the left of the endpoint (red arrow). Also in the CustomAnimation task pane, do the following:Drag the 11th effect until it is second in the list of effects. Drag the 12th effect (motion path for the first large rectangle) until it is fourth in the list of effects. Also in the CustomAnimation task pane, select the 13th animation effect (motion path for the second picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the green arrow for the first picture motion path. Also in the CustomAnimation task pane, do the following:Drag the 13th animationeffect until it is sixth in the list of effects. Under Modify: Right, in the Start list, select With Previous.Drag the 14th animation effect (motion path for the second large rectangle) until it is eighth in the list of effects. Select the 15th animation effect (motion path for the third picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Also in the CustomAnimation task pane, do the following:Drag the 15th animation effect until it is 10th in the list of effects. Under Modify: Right, in the Start list, select With Previous.Drag the 16th animation effect (motion path for the third large rectangle) until it is 12th in the list of effects. Select the 17th animation effect (motion path for the fourth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Also in the CustomAnimation task pane, do the following:Dragthe 17th animation effect until it is 14th in the list of effects. Under Modify: Right, in the Start list, select With Previous.Drag the 18th animation effect (motion path for the fourth large rectangle) until it is 16th in the list of effects.Select the 19th animation effect (motion path for the fifth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path.Also in the CustomAnimation task pane, drag the 19th animation effect until it is 18th in the list of effects. Under Modify: Right, in the Start list, select With Previous.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Corner (fifth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 25%(fourth row, first option from the left).
SmartArt custom animation effects: motion path and faded zoom(Intermediate)To reproduce the SmartArt effects on this page, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click BasicChevronProcess (third row, first option from the left), and then click OK to insert the graphic into the slide.To create a fourth chevron shape, select the chevron shape at the right end of the graphic, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and select AddShapeAfter.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Colorful click Colorful Range – Accent Colors 3 to 4 (third option from the left).Click More, and then under 3-D, click Inset (first row, second option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Faded Zoom. Under Modify: Faded Zoom, in the Speed list, select Fast.Also in the Custom Animation task pane, click Add Effect, point to Motion Paths, and then click Left.Also in the Custom Animation task pane, select the second animation effect (left motion path), and then under Modify: Left,in the Speed list, select Fast.On the slide, right-click the motion path, and then click Reverse Path Direction.(Note: The green arrow will move to the left end of the motion path.)Press and hold CTRL, and then select the first and second animation effects (faded zoom effect and left motion path) in the Custom Animation task pane. Click the arrow to the right of the second animation effect (left motion path), and then click Effect Options. In the Left dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, do the following:Click the double arrow under the first animation effect (faded zoom effect) to expand the contents of the list of effects.Click the double arrow under the second animation effect (left motion path) to expand the contents of the list of effects. Press and hold CTRL, and then in the Custom Animation task pane, select the first, second, third, and fourth animation effects (all four faded zoom effects). Under Modify: Faded Zoom, in the Start list, select After Previous.Press and hold CTRL, and then in the Custom Animation task pane, select the fifth, sixth, seventh, and eighth animation effects (all four left motion paths). Under Modify:Left, in the Start list, select With Previous.Also in the Custom Animation task pane, do the following to reorder the list of effects:Drag the fifth animation effect (first left motion path) until it is second in the list of effects.Drag the sixth animation effect (second left motion path) until it is fourth in the list of effects.Drag the seventh animation effect (third left motion path) until it is sixth in the list of effects.To reproduce the background effects on this slide, do the following:Right-click the slide background, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction list, click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
SmartArt custom animation effects: basic radial(Intermediate)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Basic Radial (sixth row, second option from the left), and then click OK to insert the graphic into the slide.On the slide, select the SmartArtgraphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullet, enter the text for the center circle of the graphic. In the second-level bullets, enter the text for all the other shapes in the SmartArt graphic. With the SmartArt graphic still selected, on the Design tab, in the Themes group, click Colors, and then select Median. Under SmartArtTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5”.In the ShapeWidth box, enter 7.5”.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click SmartArtStyles, and then under Best Match for Document select IntenseEffect (fifth option from the left).On the Home tab, in the Font group, click the button next to FontColor, and then under ThemeColors select Black, Text 1 (first row, second option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Surface, do the following:In the Material list, under SpecialEffect, select SoftEdge (first row, second option from the left).In the Lighting list, under Neutral, select Harsh (first row, fourth option from the left).In the Angle box, enter 30°.Press and hold CTRL, and select all five shapes in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, in the Presets list, under Outer select OffsetBottom (first row, second option from the left), and then do the following:In the Transparency box, enter 65%.In the Size box, enter 103%.In the Blur box, enter 9 pt.In the Angle box, enter 90°.In the Distance box, enter 3 pt.To reproduce the SmartArt effects on this slide, do the following:On the slide, select the center circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.On the slide, select the top circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 20 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 15 pt.Press and hold SHIFT, and then on the top circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 20.Drag the top circle approximately 0.5” to the right.Select the right circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Gold, Accent 4 (first row, eighth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.Press and hold SHIFT, and then on the right circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 28 pt.Drag the right circle slightly toward the right corner of the slide.One the slide, select the bottom circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Green, Accent 5 (first row, ninth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and then on the bottom circle, drag a corner adjustment handle away from the center to increase the size.On the Home tab, in the Font group, in the Font Size box, enter 28.On the slide, select the left circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Olive Green, Accent 3 (first row, seventh option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 30 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 30 pt.Press and hold SHIFT, and then on the left circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 40, and then click Bold.Drag the top circle slightly toward the bottom of the slide.To reproduce the line effects on this slide, do the following:Press and hold CTRL, and then select each of the four lines connecting the circles in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following:In the Type list, select Linear.In the Direction list, select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%.Also in the FormatShape dialog box, clickLineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.5 pt.In the Dashtype list, select RoundDot (second option from the top).To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Animations group, click CustomAnimation. On the slide, select the SmartArt graphic, and then in the CustomAnimation task pane, to the following:Click AddEffect, point to Entrance, and select MoreEffects. In the AddEntranceEffect dialog box, under Moderate, select Zoom.Click the arrow to the right of the zoom entrance effect, and then select EffectOptions. In the Zoom dialog box, do the following:On the Effect tab, in the Zoom list, select In from ScreenCenter.On the Timing tab, in the Speed list, select 1 seconds (Fast). On the SmartArtAnimation tab, in the Group graphic list, select From center one by one. In the CustomAnimation task pane, expand the contents of the list by clicking the double arrow under the zoom entrance effect, and then do the following:Select the first effect (zoom entrance effect), and under Modify: Zoom, in the Start list, select WithPrevious.Select the second effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the second effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box dothe following:On the Effect tab, in the Direction list, select FromBottom.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the fourth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the fourth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the sixth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the sixth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the eighth effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the eighth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromRight.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1 (first row, second option from the left).
SmartArt custom animation effects: vertical picture list(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, double-click Vertical Picture List (fourth row, first option from the left) to insert the graphic into the slide. To create a fourth shape in the graphic, select the third shape from the top, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and then click AddShapeBefore. Repeat this process to create a fifth shape.Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 6.38”.In the Width box, enter 7.91”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, click each of the second-level bullets and then press DELETE until there are only three first-level bullets remaining (one for each shape). Enter text for each shape into the first-level bullets.On the slide, select the graphic. On the Home tab, in the Font group, select 14 from the Font Size list.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click More,and then under Best Match for Document click Moderate Effect (fourth option from the left). On the Design tab, in the Themes group, click Colors, and then click Civic. (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the theme colors will be applied to all of the slides.) Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click Change Colors, and then under Colorful click Colorful Range – Accent Colors 3 to 4 (third option from the left). Click each of the five picture placeholders in the graphic, and then in the Insert Picture dialog box, select a picture and click Insert.Press and hold CTRL, and then select all five of the pictures on the slide. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles clickRoundDiagonalCornerRectangle (ninth option from the left).Under SmartArtTools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then do the following:Under Glow Variations, select Accent color 1, 5 pt glow (first row, first option from the left).Point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left).Press and hold CTRL, and then select all of the larger rounded rectangles. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles clickRoundDiagonalCornerRectangle (ninth option from the left). To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the Custom Animation taskpane, do the following:Click Add Effect, point to Entrance, and then clickMoreEffects. In the Add Entrance Effect dialog box, underSubtle, clickFade,and then click OK. Under Modify: Fade, in the Speed list, selectFast. Click Add Effect, point to Motion Paths, and then clickRight. Under Modify: Right, do the following:In the Start list, selectWith Previous.In the Speed list, select Fast. On the slide, right-click the right motion path and then click ReversePathDirection.Press and hold CTRL, and then select the two animationeffects in the Custom Animation task pane. Click the arrow to the right of one of those effects, and then clickEffectOptions. In theEffect Options dialog box, on the SmartArtAnimation tab, in the Group Graphic list, select One by One.Also in the CustomAnimation task pane, do the following:Click the double arrows under each effect to expand the list of effects.Select the first animation effect (fade effect for the first rectangle). Under Modify: Fade, in the Start list, select With Previous.Also in the CustomAnimation task pane, select the 11th animation effect (motion path for the first picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT to constrain the path to a straight horizontal line, and then drag the starting point to the left of the endpoint (red arrow). Also in the CustomAnimation task pane, do the following:Drag the 11th effect until it is second in the list of effects. Drag the 12th effect (motion path for the first large rectangle) until it is fourth in the list of effects. Also in the CustomAnimation task pane, select the 13th animation effect (motion path for the second picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the green arrow for the first picture motion path. Also in the CustomAnimation task pane, do the following:Drag the 13th animationeffect until it is sixth in the list of effects. Under Modify: Right, in the Start list, select With Previous.Drag the 14th animation effect (motion path for the second large rectangle) until it is eighth in the list of effects. Select the 15th animation effect (motion path for the third picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Also in the CustomAnimation task pane, do the following:Drag the 15th animation effect until it is 10th in the list of effects. Under Modify: Right, in the Start list, select With Previous.Drag the 16th animation effect (motion path for the third large rectangle) until it is 12th in the list of effects. Select the 17th animation effect (motion path for the fourth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Also in the CustomAnimation task pane, do the following:Dragthe 17th animation effect until it is 14th in the list of effects. Under Modify: Right, in the Start list, select With Previous.Drag the 18th animation effect (motion path for the fourth large rectangle) until it is 16th in the list of effects.Select the 19th animation effect (motion path for the fifth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path.Also in the CustomAnimation task pane, drag the 19th animation effect until it is 18th in the list of effects. Under Modify: Right, in the Start list, select With Previous.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Corner (fifth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 25%(fourth row, first option from the left).
SmartArt custom animation effects: motion path and faded zoom(Intermediate)To reproduce the SmartArt effects on this page, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click BasicChevronProcess (third row, first option from the left), and then click OK to insert the graphic into the slide.To create a fourth chevron shape, select the chevron shape at the right end of the graphic, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and select AddShapeAfter.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Colorful click Colorful Range – Accent Colors 3 to 4 (third option from the left).Click More, and then under 3-D, click Inset (first row, second option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Faded Zoom. Under Modify: Faded Zoom, in the Speed list, select Fast.Also in the Custom Animation task pane, click Add Effect, point to Motion Paths, and then click Left.Also in the Custom Animation task pane, select the second animation effect (left motion path), and then under Modify: Left,in the Speed list, select Fast.On the slide, right-click the motion path, and then click Reverse Path Direction.(Note: The green arrow will move to the left end of the motion path.)Press and hold CTRL, and then select the first and second animation effects (faded zoom effect and left motion path) in the Custom Animation task pane. Click the arrow to the right of the second animation effect (left motion path), and then click Effect Options. In the Left dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, do the following:Click the double arrow under the first animation effect (faded zoom effect) to expand the contents of the list of effects.Click the double arrow under the second animation effect (left motion path) to expand the contents of the list of effects. Press and hold CTRL, and then in the Custom Animation task pane, select the first, second, third, and fourth animation effects (all four faded zoom effects). Under Modify: Faded Zoom, in the Start list, select After Previous.Press and hold CTRL, and then in the Custom Animation task pane, select the fifth, sixth, seventh, and eighth animation effects (all four left motion paths). Under Modify:Left, in the Start list, select With Previous.Also in the Custom Animation task pane, do the following to reorder the list of effects:Drag the fifth animation effect (first left motion path) until it is second in the list of effects.Drag the sixth animation effect (second left motion path) until it is fourth in the list of effects.Drag the seventh animation effect (third left motion path) until it is sixth in the list of effects.To reproduce the background effects on this slide, do the following:Right-click the slide background, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction list, click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
SmartArt custom animation effects: stacked Venn diagram(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Stacked Venn (eighth row, second option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. Select the graphic. On the Design tab, in the Themes group, click Colors,and then under Built-in click Median. (Note: if this action is taken in a PowerPoint presentation containing more than one slide, the theme color will be applied to all of the slides.)Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following: Click ChangeColors, and then under Colorful click Colorful – Accent Colors (first option from the left).Click More, and then under 3-D click Polished (first row, first option from the left).On the Home tab, in the Font group, select Franklin Gothic Medium Cond from the Font list, and then select 28 from the Font Size list.To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Basic, click Fly-In.Under Modify: Fly-In, in the Speed list, select Fast.Also in the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Faded Zoom.Under Modify: Faded Zoom, in the Speed list, select Fast.Also in the CustomAnimation task pane, do the following:Click Add Effect, point to Emphasis, and then click MoreEffects. In the Add Entrance Effect dialog box, under Basic, click Grow/Shrink.Under Modify: Grow/Shrink, in the Size list, in the Custom box, enter 30%, and then press ENTER. Also in the Size list, click Vertical. Under Modify: Grow/Shrink, in the Speed list, select Very Fast.Also in the CustomAnimation task pane, select the third animation effect (grow/shrink effect). Click the arrow to the right of the animation effect, click EffectOptions, and then do the following in theGrow/Shrink dialog box:On the SmartArtAnimation tab, in the Group graphic list, select One by one.On the Effect tab, under Settings, select Auto-reverse. Press and hold CTRL, and then select all three animation effects in the Custom Animation task pane. Click the arrow to the right of one of the selected effects, and then click EffectOptions. In the EffectOptions dialog box, on the SmartArtAnimation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under each animation effect to expand the contents of the list of effects, and then do the following:Select the first animation effect (first fly-in effect), and then do the following: Under Modify: Fly-In, in theStart list, select With Previous. Under Modify: Fly-In, in the Direction list, select From Bottom-Left.Select the second animation effect (second fly-in effect), and then under Modify: Fly-In,in the Direction list, select From Bottom-Right.Select the third animation effect (third fly-in effect), and then under Modify: Fly-In, in the Direction list, select From Bottom-Left.Select the fourth animation effect (fourth fly-in effect), and then under Modify: Fly-In, in the Direction list, select From Bottom-Right.Press and hold CTRL, select the fifth, sixth, seventh, eighth, ninth, 10th, 11th, and 12th animation effects (all of the faded zoom effects and grow/shrink effects), and then under Modify selected effects, in theStart list, select With Previous.Also in the Custom Animation task pane, do the following to reorder the list of effects:Drag the fifth animation effect (first faded zoom effect) until it is second in the list of effects.Drag the sixth animation effect (second faded zoom effect) until it is fourth in the list of effects.Drag the seventh animation effect (third faded zoom effect) until it is sixth in the list of effects.Drag the ninth animation effect (first grow/shrink effect) until it is third in the list of effects.Drag the 10th animation effect (second grow/shrink effect) until it is sixth in the list of effects.Drag the 11th animation effect (third grow/shrink effect) until it is ninth in the list of effects.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Corner (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickWhite, Background 1, Darker 35% (fifth row, first option from the left).
SmartArt custom animation effects: basic radial(Intermediate)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Basic Radial (sixth row, second option from the left), and then click OK to insert the graphic into the slide.On the slide, select the SmartArtgraphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullet, enter the text for the center circle of the graphic. In the second-level bullets, enter the text for all the other shapes in the SmartArt graphic. With the SmartArt graphic still selected, on the Design tab, in the Themes group, click Colors, and then select Median. Under SmartArtTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5”.In the ShapeWidth box, enter 7.5”.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click SmartArtStyles, and then under Best Match for Document select IntenseEffect (fifth option from the left).On the Home tab, in the Font group, click the button next to FontColor, and then under ThemeColors select Black, Text 1 (first row, second option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Surface, do the following:In the Material list, under SpecialEffect, select SoftEdge (first row, second option from the left).In the Lighting list, under Neutral, select Harsh (first row, fourth option from the left).In the Angle box, enter 30°.Press and hold CTRL, and select all five shapes in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, in the Presets list, under Outer select OffsetBottom (first row, second option from the left), and then do the following:In the Transparency box, enter 65%.In the Size box, enter 103%.In the Blur box, enter 9 pt.In the Angle box, enter 90°.In the Distance box, enter 3 pt.To reproduce the SmartArt effects on this slide, do the following:On the slide, select the center circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.On the slide, select the top circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 20 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 15 pt.Press and hold SHIFT, and then on the top circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 20.Drag the top circle approximately 0.5” to the right.Select the right circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Gold, Accent 4 (first row, eighth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.Press and hold SHIFT, and then on the right circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 28 pt.Drag the right circle slightly toward the right corner of the slide.One the slide, select the bottom circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Green, Accent 5 (first row, ninth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and then on the bottom circle, drag a corner adjustment handle away from the center to increase the size.On the Home tab, in the Font group, in the Font Size box, enter 28.On the slide, select the left circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Olive Green, Accent 3 (first row, seventh option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 30 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 30 pt.Press and hold SHIFT, and then on the left circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 40, and then click Bold.Drag the top circle slightly toward the bottom of the slide.To reproduce the line effects on this slide, do the following:Press and hold CTRL, and then select each of the four lines connecting the circles in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following:In the Type list, select Linear.In the Direction list, select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%.Also in the FormatShape dialog box, clickLineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.5 pt.In the Dashtype list, select RoundDot (second option from the top).To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Animations group, click CustomAnimation. On the slide, select the SmartArt graphic, and then in the CustomAnimation task pane, to the following:Click AddEffect, point to Entrance, and select MoreEffects. In the AddEntranceEffect dialog box, under Moderate, select Zoom.Click the arrow to the right of the zoom entrance effect, and then select EffectOptions. In the Zoom dialog box, do the following:On the Effect tab, in the Zoom list, select In from ScreenCenter.On the Timing tab, in the Speed list, select 1 seconds (Fast). On the SmartArtAnimation tab, in the Group graphic list, select From center one by one. In the CustomAnimation task pane, expand the contents of the list by clicking the double arrow under the zoom entrance effect, and then do the following:Select the first effect (zoom entrance effect), and under Modify: Zoom, in the Start list, select WithPrevious.Select the second effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the second effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box dothe following:On the Effect tab, in the Direction list, select FromBottom.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the fourth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the fourth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the sixth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the sixth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the eighth effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the eighth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromRight.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1 (first row, second option from the left).
SmartArt custom animation effects: basic radial(Intermediate)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Basic Radial (sixth row, second option from the left), and then click OK to insert the graphic into the slide.On the slide, select the SmartArtgraphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullet, enter the text for the center circle of the graphic. In the second-level bullets, enter the text for all the other shapes in the SmartArt graphic. With the SmartArt graphic still selected, on the Design tab, in the Themes group, click Colors, and then select Median. Under SmartArtTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5”.In the ShapeWidth box, enter 7.5”.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click SmartArtStyles, and then under Best Match for Document select IntenseEffect (fifth option from the left).On the Home tab, in the Font group, click the button next to FontColor, and then under ThemeColors select Black, Text 1 (first row, second option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Surface, do the following:In the Material list, under SpecialEffect, select SoftEdge (first row, second option from the left).In the Lighting list, under Neutral, select Harsh (first row, fourth option from the left).In the Angle box, enter 30°.Press and hold CTRL, and select all five shapes in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, in the Presets list, under Outer select OffsetBottom (first row, second option from the left), and then do the following:In the Transparency box, enter 65%.In the Size box, enter 103%.In the Blur box, enter 9 pt.In the Angle box, enter 90°.In the Distance box, enter 3 pt.To reproduce the SmartArt effects on this slide, do the following:On the slide, select the center circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.On the slide, select the top circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 20 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 15 pt.Press and hold SHIFT, and then on the top circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 20.Drag the top circle approximately 0.5” to the right.Select the right circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Gold, Accent 4 (first row, eighth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.Press and hold SHIFT, and then on the right circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 28 pt.Drag the right circle slightly toward the right corner of the slide.One the slide, select the bottom circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Green, Accent 5 (first row, ninth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and then on the bottom circle, drag a corner adjustment handle away from the center to increase the size.On the Home tab, in the Font group, in the Font Size box, enter 28.On the slide, select the left circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Olive Green, Accent 3 (first row, seventh option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 30 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 30 pt.Press and hold SHIFT, and then on the left circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 40, and then click Bold.Drag the top circle slightly toward the bottom of the slide.To reproduce the line effects on this slide, do the following:Press and hold CTRL, and then select each of the four lines connecting the circles in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following:In the Type list, select Linear.In the Direction list, select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%.Also in the FormatShape dialog box, clickLineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.5 pt.In the Dashtype list, select RoundDot (second option from the top).To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Animations group, click CustomAnimation. On the slide, select the SmartArt graphic, and then in the CustomAnimation task pane, to the following:Click AddEffect, point to Entrance, and select MoreEffects. In the AddEntranceEffect dialog box, under Moderate, select Zoom.Click the arrow to the right of the zoom entrance effect, and then select EffectOptions. In the Zoom dialog box, do the following:On the Effect tab, in the Zoom list, select In from ScreenCenter.On the Timing tab, in the Speed list, select 1 seconds (Fast). On the SmartArtAnimation tab, in the Group graphic list, select From center one by one. In the CustomAnimation task pane, expand the contents of the list by clicking the double arrow under the zoom entrance effect, and then do the following:Select the first effect (zoom entrance effect), and under Modify: Zoom, in the Start list, select WithPrevious.Select the second effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the second effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box dothe following:On the Effect tab, in the Direction list, select FromBottom.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the fourth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the fourth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the sixth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the sixth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the eighth effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the eighth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromRight.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1 (first row, second option from the left).
SmartArt custom animation effects: basic radial(Intermediate)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Basic Radial (sixth row, second option from the left), and then click OK to insert the graphic into the slide.On the slide, select the SmartArtgraphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullet, enter the text for the center circle of the graphic. In the second-level bullets, enter the text for all the other shapes in the SmartArt graphic. With the SmartArt graphic still selected, on the Design tab, in the Themes group, click Colors, and then select Median. Under SmartArtTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5”.In the ShapeWidth box, enter 7.5”.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click SmartArtStyles, and then under Best Match for Document select IntenseEffect (fifth option from the left).On the Home tab, in the Font group, click the button next to FontColor, and then under ThemeColors select Black, Text 1 (first row, second option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Surface, do the following:In the Material list, under SpecialEffect, select SoftEdge (first row, second option from the left).In the Lighting list, under Neutral, select Harsh (first row, fourth option from the left).In the Angle box, enter 30°.Press and hold CTRL, and select all five shapes in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, in the Presets list, under Outer select OffsetBottom (first row, second option from the left), and then do the following:In the Transparency box, enter 65%.In the Size box, enter 103%.In the Blur box, enter 9 pt.In the Angle box, enter 90°.In the Distance box, enter 3 pt.To reproduce the SmartArt effects on this slide, do the following:On the slide, select the center circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.On the slide, select the top circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 20 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 15 pt.Press and hold SHIFT, and then on the top circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 20.Drag the top circle approximately 0.5” to the right.Select the right circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Gold, Accent 4 (first row, eighth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.Press and hold SHIFT, and then on the right circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 28 pt.Drag the right circle slightly toward the right corner of the slide.One the slide, select the bottom circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Green, Accent 5 (first row, ninth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and then on the bottom circle, drag a corner adjustment handle away from the center to increase the size.On the Home tab, in the Font group, in the Font Size box, enter 28.On the slide, select the left circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Olive Green, Accent 3 (first row, seventh option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 30 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 30 pt.Press and hold SHIFT, and then on the left circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 40, and then click Bold.Drag the top circle slightly toward the bottom of the slide.To reproduce the line effects on this slide, do the following:Press and hold CTRL, and then select each of the four lines connecting the circles in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following:In the Type list, select Linear.In the Direction list, select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%.Also in the FormatShape dialog box, clickLineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.5 pt.In the Dashtype list, select RoundDot (second option from the top).To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Animations group, click CustomAnimation. On the slide, select the SmartArt graphic, and then in the CustomAnimation task pane, to the following:Click AddEffect, point to Entrance, and select MoreEffects. In the AddEntranceEffect dialog box, under Moderate, select Zoom.Click the arrow to the right of the zoom entrance effect, and then select EffectOptions. In the Zoom dialog box, do the following:On the Effect tab, in the Zoom list, select In from ScreenCenter.On the Timing tab, in the Speed list, select 1 seconds (Fast). On the SmartArtAnimation tab, in the Group graphic list, select From center one by one. In the CustomAnimation task pane, expand the contents of the list by clicking the double arrow under the zoom entrance effect, and then do the following:Select the first effect (zoom entrance effect), and under Modify: Zoom, in the Start list, select WithPrevious.Select the second effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the second effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box dothe following:On the Effect tab, in the Direction list, select FromBottom.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the fourth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the fourth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the sixth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the sixth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the eighth effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the eighth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromRight.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1 (first row, second option from the left).
SmartArt custom animation effects: radial list(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List (fifth row, fourth option from the left), and then click OK to insert the graphic into the slide.To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes.On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic.Press and hold CTRL, and on the slide, select the large circle and all three small circles.On the Home tab, in the Drawing group, click the arrow to the right of ShapeEffects, point to Preset, and then under Presets select Preset2 (first row, second option from the left).On the slide, click the picture placeholder in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane check Tilepicture as texture.(2) If necessary, change the tile position of the picture within the shape. To do this, in the FormatShape dialog box, in the Fill pane, under Tiling options, enter values into the OffsetX and OffsetY boxes to reposition the focal point of the picture. To resize the picture, in the FormatShape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.)Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane click Solidfill, and then in the Color list, select Gray-25%, Background 2, Darker 75% (fifth row, third option from the left).Select the middle small circle in the SmartArt graphic.On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, click Solidfill in the Fill pane, and then in the Color list select Gold, Accent 2 (first row, sixth option from the left).Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, click Solidfill in the Fill pane, and then in the Color list select Lavender, Accent 3 (first row, seventh option from the left).Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, do the following:Click LineColor in the left pane, and in the LineColor pane click Solidline.Also in the LineColor pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left).Also in the Format Shape dialog box, click LineStyle in the left pane, and in the LineStyle pane, do the following: In the Width box, enter 2.5 pt.In the Dashtype list, select RoundDot (second option from the top).Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the FontSize box, enter 22.To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation. Select the SmartArt graphic on the slide, and then in the CustomAnimation task pane, do the following:Click AddEffect, point to Entrance, and select MoreEffects. In the AddEntranceEffect dialog box, under Subtle, select Fade.Click the arrow to the right of the fade entrance effect and select EffectOptions. In the Fade dialog box, do the following:On the Timing tab, in the Start list, select WithPrevious.On the Timing tab, in the Speed list, select 1 seconds (Fast). On the SmartArtAnimation tab, in the Groupgraphic list, select One by one. Click the double arrow under the animation effect to expand the list of effects.Select the first effect in the list (fade entrance effect), and then click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Moderate, select Grow & Turn.Select the second effect in the list (fade entrance effect), and then click Change, point to Entrance and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Select the second effect in the list again (wipe entrance effect). Under Modify: Wipe,do the following:In theStart list, select AfterPrevious.In the Direction list, select FromLeft.In the Speed list, select VeryFast.Select the third effect in the list (fade entrance effect), and then click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Subtle, select FadedZoom.Select the third effect in the list again (faded zoom entrance effect). Under Modify: Faded Zoom, do the following:In the Start list, select WithPrevious.In the Speed list, select Fast.Select the fourth effect in the list (fade entrance effect), and under Modify: Fade, in the Start list select WithPrevious.Press and hold CTRL, and select the fifth and eighth effects in the list (fade entrance effects), and then click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic select Wipe, and then click OK.With the fifth and eighth effects in the list still selected (wipe entrance effects), under Modify: Wipe,do the following:In the Direction list, select FromLeft.In the Speed list, select VeryFast.Press and hold CTRL, and select the sixth and ninth effects in the list (fade entrance effects). Click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Subtle, select FadedZoom.With the sixth and ninth effects in the list still selected (faded zoom entrance effects), under Modify: Faded Zoom,do the following:In the Start list, select WithPrevious.In the Speed list, select VeryFast.Press and hold CTRL, and select the seventh and 10th animation effects in the list (fade entrance effects), and then under Modify: Fade, in the Start list, select AfterPrevious.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under ThemeColors select White, Background 1 (first row, first option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 35% (fifth row, first option from the left).
