laser-scanning-architectureArchitekt Johannes Rechenbach, Hannoverphone +49-511-814060 mail@lsa3d.com         laser-scanni...
VitaJohannes Rechenbach, Architect •   Diploma 1992 in Berlin •   Own Architecture Firm in Hanover, Germany since 2000 •  ...
laser-scanning-architecture.com
Challenge of today:Energy-efficient Restoration of existing Structures• Problem  Accurate visual and geometrical Documenta...
Present 2D-Documentation:• Higher Planning Expenses   because of missing or incorrect Documentation• Higher Building Expen...
laser-scanning-architecture.com
Preoccupations against 3D-Laserscanning:• highly expensive, therefore suits                       FARO Focus3d cuts  only ...
10 Scan-Positions in 3 Hours:undistorted Floor-Plan Extraction for your CAAD                          laser-scanning-archi...
10 Scan-Positions in 3 Hours:undistorted Sections at any desired Location within the 3d-Model                          las...
10 Scan-Positions in 3 Hours:creative Animations at any desired Location within the 3d-Model                          lase...
10 Scan-Positions in 3 Hours:creative Animations at any desired Location within the 3d-Model                          lase...
laser-scanning-architecture.com
laser scanning architecture
laser scanning architecture
laser scanning architecture
laser scanning architecture
laser scanning architecture
laser scanning architecture
USA:General Services Administration GSA BIM Guide Series:„The benefits of determining the spatial environment and as built...
Scan of an industrial historic Buildingfor the Project Development in Berlin                                          lase...
Advantages:• only one Time on Site without taking Measurements again and again• no more Mistakes and Failure because of wr...
Faro Webshare:   • Project-Documentation in the Internet                 • Visual Analysis in 360° Panoramas              ...
2D-Imagesusing PointCabSteel frameworkof the Roof Construction:accurate Measuring in CAADDocumentation of theas-built Situ...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
Import of Pointcloud Data into Revit: Basis for Modeling the existing Building                            laser-scanning-a...
3D-Imaging for Restoration ProjectsPlanning with 3D-Scans in Revit ArchitecturePublic Church Building near Hanover, German...
Panoramic View with 3D-Measurements in Scansoftware FARO Scene                   laser-scanning-architecture.com
Panoramic View with 3D-Measurements in Scansoftware FARO Scene                    laser-scanning-architecture.com
Correspondence View in Scansoftware FARO Scene          laser-scanning-architecture.com
Remodeling: Pointcloud in Revit Architecture        laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architecture.com
laser-scanning-architectureArchitect Johannes Rechenbach, Hannoverphone +49-511-814060 mail@lsa3d.com                     ...
Nächste SlideShare
Wird geladen in ...5
×

Precise Planning with 3D Scan-data in Revit Architecture using the FARO Laser Scanner Focus3D

5,127

Published on

FARO develops and markets portable CMMs (coordinate measuring machines) and 3D documentation devices to solve dimensional metrology problems.

Technology from FARO permits high-precision 3D measurement, documentation and comparison of parts and compound structures within production and quality assurance processes. The devices are used for inspecting components and assemblies, production planning, documenting large volume spaces or structures in 3D, and more. FARO’s 3D measurement technology allows companies to maximize efficiencies and improve processes.

0 Kommentare
1 Gefällt mir
Statistiken
Notizen
  • Hinterlassen Sie den ersten Kommentar

Keine Downloads
Views
Gesamtviews
5,127
Bei Slideshare
0
Aus Einbettungen
0
Anzahl an Einbettungen
20
Aktionen
Geteilt
0
Downloads
44
Kommentare
0
Gefällt mir
1
Einbettungen 0
No embeds

No notes for slide

Precise Planning with 3D Scan-data in Revit Architecture using the FARO Laser Scanner Focus3D

  1. 1. laser-scanning-architectureArchitekt Johannes Rechenbach, Hannoverphone +49-511-814060 mail@lsa3d.com laser-scanning-architecture.com
  2. 2. VitaJohannes Rechenbach, Architect • Diploma 1992 in Berlin • Own Architecture Firm in Hanover, Germany since 2000 • 20 Years of Experience in all Phases of Planning and Building • Reconstruction Projects and New Buildings • 3D-Scan-Service and Support, FARO Architecture Network Kleegarten Seniorenresidenz Hanover 2006 laser-scanning-architecture.com
  3. 3. laser-scanning-architecture.com
  4. 4. Challenge of today:Energy-efficient Restoration of existing Structures• Problem Accurate visual and geometrical Documentation• Complexity Necessity of precise Detailing for energetic Sufficiency• Liability Higher Risk compared to new Constructions 50% Restoration! laser-scanning-architecture.com
  5. 5. Present 2D-Documentation:• Higher Planning Expenses because of missing or incorrect Documentation• Higher Building Expenses because of unsufficient Documentation for the Tender Procedure• Loss of Building Quality and Increase of Construction Time because of late Detail Decisions during the Building Process not economical! laser-scanning-architecture.com
  6. 6. laser-scanning-architecture.com
  7. 7. Preoccupations against 3D-Laserscanning:• highly expensive, therefore suits FARO Focus3d cuts only specific purposes hardware costs by 50%• huge amount of data, not suitable for great workflow with 64 bit the average client Systems + up-to-date Software• post-processing very time-consuming easy with Autocad + Revit and not efficient this is History! laser-scanning-architecture.com
  8. 8. 10 Scan-Positions in 3 Hours:undistorted Floor-Plan Extraction for your CAAD laser-scanning-architecture.com
  9. 9. 10 Scan-Positions in 3 Hours:undistorted Sections at any desired Location within the 3d-Model laser-scanning-architecture.com
  10. 10. 10 Scan-Positions in 3 Hours:creative Animations at any desired Location within the 3d-Model laser-scanning-architecture.com
  11. 11. 10 Scan-Positions in 3 Hours:creative Animations at any desired Location within the 3d-Model laser-scanning-architecture.com
  12. 12. laser-scanning-architecture.com
  13. 13. laser scanning architecture
  14. 14. laser scanning architecture
  15. 15. laser scanning architecture
  16. 16. laser scanning architecture
  17. 17. laser scanning architecture
  18. 18. laser scanning architecture
  19. 19. USA:General Services Administration GSA BIM Guide Series:„The benefits of determining the spatial environment and as built conditions (by3D-Imaging) have played a key role in reducing costs and delivering a higherquality engineering effort.”Advice: Use of 3D-Imaging and BIM for best results in public buildingprojectsEngland:Introduction of BIM for all public building projects until 2016.37.000 public buildings with heritage value.Sweden und Finland:BIM is mandatrory for the building application – no more 2D drawingsGermany: ……….??? laser-scanning-architecture.com
  20. 20. Scan of an industrial historic Buildingfor the Project Development in Berlin laser-scanning-architecture.com
  21. 21. Advantages:• only one Time on Site without taking Measurements again and again• no more Mistakes and Failure because of wrong or missing Information• one Data Model for all Extractions laser scanning architecture
  22. 22. Faro Webshare: • Project-Documentation in the Internet • Visual Analysis in 360° Panoramas • Measurements for Distances and Spaces online laser-scanning-architecture.com
  23. 23. 2D-Imagesusing PointCabSteel frameworkof the Roof Construction:accurate Measuring in CAADDocumentation of theas-built Situation:- Brick Formats- Wall Details- structural Damages laser-scanning-architecture.com
  24. 24. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  25. 25. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  26. 26. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  27. 27. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  28. 28. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  29. 29. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  30. 30. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  31. 31. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building laser-scanning-architecture.com
  32. 32. 3D-Imaging for Restoration ProjectsPlanning with 3D-Scans in Revit ArchitecturePublic Church Building near Hanover, Germany Revit-Model by rechenbach architecture laser-scanning-architecture.com
  33. 33. Panoramic View with 3D-Measurements in Scansoftware FARO Scene laser-scanning-architecture.com
  34. 34. Panoramic View with 3D-Measurements in Scansoftware FARO Scene laser-scanning-architecture.com
  35. 35. Correspondence View in Scansoftware FARO Scene laser-scanning-architecture.com
  36. 36. Remodeling: Pointcloud in Revit Architecture laser-scanning-architecture.com
  37. 37. laser-scanning-architecture.com
  38. 38. laser-scanning-architecture.com
  39. 39. laser-scanning-architecture.com
  40. 40. laser-scanning-architecture.com
  41. 41. laser-scanning-architecture.com
  42. 42. laser-scanning-architecture.com
  43. 43. laser-scanning-architecture.com
  44. 44. laser-scanning-architecture.com
  45. 45. laser-scanning-architectureArchitect Johannes Rechenbach, Hannoverphone +49-511-814060 mail@lsa3d.com Thank you for Listening! laser-scanning-architecture.com
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×