Completing as ambitious of an undertaking as drilling your own water well seems like it would be too much for a lot of people. It comes down to one of two things: determining subsurface water flow and finishing the groundwater mapping process.

1. How to Drill Your Own Water Well
Completing as ambitious of an undertaking as
drilling your own water well seems like it would
be too much for a lot of people. It comes down
to one of two things: determining subsurface
water flow and finishing the groundwater
mapping process. Once you have finished these
tasks, you can then move on to determining who
you want to drill your well. The task is difficult,
but it’s something that the average person could
complete with the use of the right tools and
research into how it’s done properly. Due to the
potential for so many things to go wrong with
the utilities that are lurking beneath the ground, it’s important to have a policy of if you can’t do
it right the first time, you might as well forgo the project altogether.
Obtaining the Right Clearances
Whenever you seek to start a project like drilling your own water well, you have to obtain some
clearances from various legislative bodies. It’s always good to have these clearances finalized
and in your hand before you begin the digging process. You wouldn’t want to have the
authorities come to your house while you’re digging and ask if you have to a permit only to
discover that your permits are still in the pending stage. Everything has to be in order, whether
it’s figuring out the subsurface water flow or finalizing the groundwater mapping process or
something else entirely. The work that you put into planning will do a lot towards determining
whether your project will be a success.
Hiring the Right Professionals
Every task requires someone that has a different level of expertise, even if the two tasks seem
similar. Discovering subsurface water flow and engaging in groundwater mapping are only two
parts of a very complicated process. You need to put a lot of trained professionals through the
ringer to see if they have the right qualifications. Some
people might have experience in construction, but it’s
not what you might need to have your well drilled
correctly. If you’re paying someone to do the work for
you, it’s essential that you invest in a person that will
do the job to the best of their abilities. The market is so
flush with contractors that it’s difficult to make heads
or tails of them. Through some preliminary interviews,
you should have no problem spotting the most
qualified candidates.

2. Taking the Next Step
After you know the subsurface water flow and have groundwater mapping squared away, you
can then move on to drilling the actual well. This process might take a little longer than you
expected when you consider all the steps that you have to go through to complete it. As long as
you have a plan in place, you should rest easy knowing that you will get it all done in a timely
manner. You need to stick to the plan to ensure that you will finish everything when it needs to
be finished. The speed and effectiveness with which you complete your project will determine
whether you finish under budget or the project as a whole becomes entirely too bloated.
Photo Credit: Kashif Mardani, Marcovdz