The document provides information about Flowserve Microfinish Valves Pvt Ltd, which was established in 1997 in Hubli, India as a joint venture between Microfinish and Flowserve Corporation USA. The company manufactures industrial valves and pumps. It has achieved ISO and CE certifications and exports its products to over 15 countries. Safety is a priority for the company and it was certified as the 'Safest Entity' by Flowserve US.
How to Get Started in Social Media for Art League City
Safety measures for employees project report mba hr
1. FLOWSERVE MICROFINISH VALVES PVT LTD
EXECUTIVE SUMMURY
The Flowserve Microfinish valves pvt ltd was established in 1997 at hubli.we started our
project with the organization study of the particular organization, we passed through the
various departments of the organization like sales and shipping, accounts and
administration, quality assurance and production departments, then after the organization
study through observation then selected the research topic as Safety Measures for
employees in Flow Serve Micro Finish Valves Pvt, Ltd.
Then we carried on our research through the descriptive research methodology in
which prepared structured questionnaire with 12 questions and surveyed employees,the
results and findings of the survey are given below:
In our survey we found that very few accidents are met, then all the employees are
aware of the safety measures and the safety measure policies provided to them, overall
opinion is that all employees are satisfied by the safety tools provided to them by the
organization.
BABASAB PATIL 1
2. FLOWSERVE MICROFINISH VALVES PVT LTD
INTRODUCTION
Flow serve Micro finish is one of the 100% EOU [Export Oriented Unit] in the
city of Hubli. The Flow serve Micro finish group of companies consist of two units
namely Flow serve Micro finish Valves Pvt Ltd [FMVPL] and Flow serve Micro
finish Pumps Pvt Ltd [FMPPL].
Flow serve Micro finish Valves Private Limited (Here in after referred to as
the company) was established in 1997 to manufacture Industrial valves, plug valves
and valve components. The company is located in the Industrial Area, Hubli which
is one of the Biggest Industrial centers in the state of Karnataka, India. Hubli is
situated midway between Poona and Bangalore on the NH – 4 Highway and is
connected by Road , Rail, and Air. The company’s manufacturing unit has a 15,000
Sq .ft of built up area to house the facility.
The Company is catering the major needs of industries in the field of
petrochemicals, refineries, fertilizers, fine- chemicals, pharmaceuticals, food &
beverages and other general chemical industries.
FLOWERSERVE PVT LTD., USA:
Flow serve Pvt Ltd. is a U.S.A company which was set up in early 1920.
Flow serve Pvt Ltd produces engineered and process pumps, precision mechanical
seals, automated and manual quarter-turn valves, control valves and valve actuators,
and provides a range of related flow management services, primarily for the process
industries. Flow serve engineers products and provides services to meet the needs of
the global flow management industry. Flow serve serves the flow management
industry worldwide. More than 40% of the Company's 2006 sales of $3 billion were
outside the United States.
Flow serve Pvt Ltd is having its business more than 30 countries to name
few are Canada, Belgium, Australia, India, Argentina, Mexico, Germany, etc. Flow
serve Pvt Ltd of U.S.A. found a Indian market for its expanding its business and
came to India by the way of joint venture.
BABASAB PATIL 2
3. FLOWSERVE MICROFINISH VALVES PVT LTD
INDUSTRY PROFILE
Heavy Engineering Industry is one of the largest segments of Industrial production. It
occupies a whole range of industries such as Heavy Electricity Machinery. Turbines,
Generators, Transformers, Switchgears, Textile Machinery etc. The Index of Industrial
Production figures of 8 of the 16 major industry groups show substantial growth with the
rates ranging from 6% to 28%.
Thought there was some signs of recovery in the third quarter of 2002-2003 the
stimuli seems to have dissipated quickly. The problem with the cotton textile sector has
also continued to perform badly in the last two years. The only positive development is
the measures announced for the textile industry in the recent budget.
Trends across major sectors show that growth in the two lead sectors-capital
goods and ./lk,.l,.mmmmm,xzccCconsumer non-durable goods-have decelerated but still
remain at the double-digit levels. This has, however, been compensated by the strong
recovery in the intermediate goods segment. A major concern is the lackluster
performance of the consumer durable goods segment over the last year with production
declining for the first time since themed-nineties.
BABASAB PATIL 3
4. FLOWSERVE MICROFINISH VALVES PVT LTD
VALVE & PUMPS INDUSTRY
A valve is a device that regulates the flow of fluids (either gases, fluidized solids, liquids)
by opening, closing, or partially obstructing, various passageways. Valves are used in a
variety of applications including industrial, military, commercial, residential,
transportation, etc
They are mainly used for safety purposes in steam engines and domestic heating or
cooking appliances. Others are used in a controlled way in Otto cycle engines driven by a
camshaft, and they have a major part in engine cycle control.
A Pump is a device that manages the needs of fluids (either gases, fluidized solids,
slurries or liquids) by pumping . Pumps are used in a variety of applications including
industrial, military, commercial, residential, transportation, etc.
AN ORIGIN OF THE INDUSTRY
The development of control and instrumentation sector has undergone
transformation in phases. Early processes were relatively simple and plant
size small. Measuring instruments were mounted directly on the process
lines. Monitoring and recording of measured values were performed by
plant
Operators. As the plant size and process complexity increased, the
number of critical parameters that needed to be measured and monitored
also increased. This led to the requirement for a centralized monitoring of
process variables, and the introduction of signal transmitters and
transmission techniques. The first system employed pneumatic transmitters
of the forced balance type. Manual control gave way subsequently to
automatic control implemented through pneumatic controllers. Later
electronic controllers began to gain ground.
BABASAB PATIL 4
5. FLOWSERVE MICROFINISH VALVES PVT LTD
GROWTH & DEVELOPMENT OF THE INDUSTRY
The domain of primary sensing elements comprises of measurement
of flow, level, temperature, pressure, vibration, electrical parameters and
analyzers. Development in flow elements is targeted towards reducing
pressure loss and increasing accuracy.
The demand for the valve business is going to increase by 30-40%
and pump business would increase proportionately.
Pumps & Valve Manufacturing Industry in India is growing at the
rate of 10-12% per annum. 500 large, medium & small-scale
manufacturers in India manufacture approximately 6,000 pumps &
20,000 valves per day in India.
All core sectors of industry namely power, oil & gas, water &
infrastructure projects, metal and mining, chemicals, drugs &
pharmaceuticals & food and beverages require various types of pumps &
valves and each of these industries are growing at a exorbitant rate today
in India.
PRESENT STATUS OF THE INDUSTRY
Indian Scenario
Following industrialization India has established over the years
reasonably sound technological base in many industries including process
oriented industries like steel, power, cement, fertilizers, petrochemicals
and refineries. In developing these needs for process control
instrumentation was apparent.
BABASAB PATIL 5
6. FLOWSERVE MICROFINISH VALVES PVT LTD
BUSINESS ENVIRONEMENT OF THE INDUSTRY
Indian market for Industrial Pumps and Systems has been a mature market
since years. India has been a reliable, technically competent, competitive
and enterprising outsourcing option for many multinational companies in
the field of Industrial Pumps and Systems for outsourcing to countries
such as USA, Germany, Holland etc .for:- Pumps, Systems, Pump
Components and sub-assemblies-cast and machined, fabricated and
finished, molded, customized and/or mass-produced- Basic and Applied
research and analysis employing also CFD techniques .
A Valves & Pumps industry deals with the Business Marketing . They
are widely used in Chemical & Process industries, Refineries,
Petrochemicals & Fertilizer plants, Pharmaceuticals, Oil Exploration,
Thermal & Nuclear plants, Food & Beverage industries, Effluent
Treatment & Sewerage plants, Water Treatment, Cooling Water & Water
Supply plants, mining industries etc.
FUTURE OF THE INDUSTRY
Valves & Pumps are tremendous growth opportunity in the areas of Chemical & Process
industries, Refineries, Petrochemicals & Fertilizer plants, Pharmaceuticals, Oil
Exploration, Thermal & Nuclear plants, Food & Beverage industries, Effluent Treatment
& Sewerage plants, Water Treatment, Cooling Water & Water Supply plants, mining
industries etc.
BABASAB PATIL 6
7. FLOWSERVE MICROFINISH VALVES PVT LTD
COMPANY PROFILE
BACKGROUND AND INCEPTION OF THE COMPANY:
Flow serve micro finish group of companies having two units namely Flow serve Micro
finish Valves Pvt. Ltd.., and Flow serve Micro finish Pumps Pvt. Ltd., was established in
1997 to manufacture Industrial Valves viz. Ball Valves and Plug Valves and Industrial
Pumps viz. ISO Pumps and ANSI Pumps. The Group of Companies is located in
Industrial Area, Hubli, which is one of the biggest Industrial Center in the State of
Karnataka, India. Hubli is situated midway between Pune and Bangalore on the NH4
Highway and is well connected by road and rail. Valves and Pumps manufacturing
i.e...Mifs have a 15,000 Sq. feet and 10,000 Sq. feet of built-up area to house the facilities
respectively. Both divisions have an open space of 10,000 Sq. feet and 15,000 Sq. feet
respectively for further expansion.
The two units have excellent machining testing facilities, consisting of CNC's,
center lathes, milling, drilling, grinding machines, SPM’s etc. supported by adequate
gauging, measuring instruments. Dedicated Staff &, workers strive &, ensure that quality
objectives are achieved.
The units are catering to the needs of major Industries in the field of
Petrochemicals, Refiners, Fertilizers, Fine chemicals, Pharmaceuticals, Food and
Beverages and other general Chemical industries.
Flow serve Micro finish Valves Pvt. Ltd., and Flow serve Micro finish Pumps Pvt.
Ltd., has a documented Quality System to meet the requirements of ISO 9001: 2000
requirements to ensure that its orders are processed; products are manufactured to meet
the requirements of the customer. Flow serve Micro finish. Valves Pvt. Ltd., in addition
meets requirement of PED 97/23/EC.
BABASAB PATIL 7
8. FLOWSERVE MICROFINISH VALVES PVT LTD
VISION :
Vision is to manufacture quality valve products for the process industry
worldwide. We embrace the concept of total quality and people involvement to enhance
“Total quality satisfaction” and commit to maintain this standard of excellent through
continual improve and use of quality management system.
MISSION:
Mission is to manufacture quality valve products for the process industry
worldwide. We embrace the concept of total quality and people involvement to enhance
“Total Customer Satisfaction” and commit to maintain this standard of excellence
through continual improvements and use of quality management system.
BABASAB PATIL 8
11. FLOWSERVE MICROFINISH VALVES PVT LTD
Plug Valve
VALVES
valves are mechanical devices specifically designed to direct, stop, mix or regulate
the flow, pressure or temperature of a process fluid. Valves can be designed to handle
either liquid or gas application.
By nature of their design, functions and applications, valves come in a wide
variety of styles, sizes and pressure classes.
BASIC FUNCTIONS OF VALVES:
Starting and stopping flow.
Regulating flow volume (frequently called throttling).
Preventing reserve flow (called anti-back down).
Changing flow direction.
Limiting fluid pressure
BABASAB PATIL 11
12. FLOWSERVE MICROFINISH VALVES PVT LTD
The application of valves is done in every imaginable field. There are ranges of
valves we encounter in our everyday life; from the valves inside our body such as
the heart valve to the valves inside the automobiles we drive, to the water faucet we
turn ON and OFF. It is hard to realize how many there are and how we come to
depend on them.
Sl.No. Product Size Max Pr. Rating Material of C
1 Ball Valve 15-20 # 300 CS / SS
0
15-50 # 800 CS / SS
2 Plug Valve 15-30 # 150 CS / SS
0
15-30 # 300 CS / SS
0
BABASAB PATIL 12
13. FLOWSERVE MICROFINISH VALVES PVT LTD
AREA OF OPERATION:
FLOWSEREVE MICROFINISH LTD:
Micro finish was set up in the year 1978. The Micro finish is manufacturing an industrial
pumps and valves. Micro finish is known for its quality product and has got certificate of
ISO 9002. In 1998 Flow serve Pvt Ltd of USA came to India by entering into a joint
venture with a Micro finish of Hubli. As Micro finish is known for its quality product
world wide, the Flow serve Corporation made a technical collaboration with the Micro
finish valves. Flow serve Pvt Ltd came to India and gave technical and management
training to the employees of the Micro finish in the year 1996 and commercialized its
business in the year 1998. The training they give was of high standard and then later
Micro finish of Hubli was able to produce spare parts of high quality. When Flow serve
Pvt Ltd inspected the spare parts which came out to be more than their expectation. Later
Micro finish started its separate 100% exporting unit and came to be known as a Flow
serve Micro finish Pvt Ltd. Hubli. Now the Flow serve Micro finish ltd. exports to more
than 15 countries to name few,
1. USA 5. SOUTH AFRICA 9. AUSTRALIA
2. U.K 6. TIWAN 10. HONGKNOG
3. GERMANY 7. BELGIUM 11.KOREA
4. BRAZIL 8. MEXICO 12. SINGAPORE
BABASAB PATIL 13
14. FLOWSERVE MICROFINISH VALVES PVT LTD
HISTORY AND NATURE OF THE COMPANY:
As mentioned earlier, Flow serve Micro finish [FMVPL & FMPPL] was established
in the year 1997 to manufacture Valves viz Ball valves and Plug valves and
Industrial Pumps viz ISO pumps and ANSI pumps. The company is formed as a
result of joint venture between Micro finish and Flow serve Corporation USA, with
Flow serve as the major shareholder.
Valves and Pumps manufacturing units have a 15,000 Sq. ft and 10,000 of
built up area to house the facilities respectively. Both the divisions have an open
space of 10,000 and 13,000 Sq. ft respectively for further expansion.
In addition, the two units have excellent machining testing facilities
consisting of CNC’s, Centre Lather, Milling, Drilling, Grinding machines SPM’s etc
supported by adequate gauging measuring instruments. Dedicated staff and workers
strive to ensure that the company’s quality objectives are achieved.
The company is having a documented Quality system to meet the
requirements of ISO 9001 – 2001 to ensure that its orders processed, products
manufactured meet the requirements of the customer. Further the company is also
certified for CE – Marking.
ACHIEVEMENTS
• The company is an ISO 9000 - 2001 recognition.
• The company is also certified for CE- Marking
• As per the Safety Related Audit conducted by Flow serve US, the
• company is certified as the ‘Safest Entity’ scoring 99%, beating even
• the Singapore and Bangalore Units.
• It has also bagged the ‘Best Garden’ award ensuring to get even the
• ‘Best Flower’ award.
BABASAB PATIL 14
15. FLOWSERVE MICROFINISH VALVES PVT LTD
FLOWSERVE MICROFINISH GROUP OF COMPANIES PVT. LTD.,
Name & Address of The Industry Flow serve Micro finish Group Of Companies pvt. Ltd.,
568/1, Industrial Area, Gokul Road, Hubli – 580 030. India.
Status of Organization Private Limited (100% EOU).
Certificates ISO 9001, ISO 2000 and PED97/ 23 / EC.
Date of Registration 19 th April 1996
Date of Commencement 1 st June 1998
Availability of communication Telephone, Fax, Internet, Printer, Hard copy, P.O.
facility
Cost of Project(Initial Investment) 3 Crores
Exporting Capacity 20,000 valves
Turn Over Per Year 20 Crores
Applicable Act 1) Factory Act:
2) Provident fund:
3) ESI( Employee State Insurance)
4) Bonus Act
5) Payment of Gratuity:
6) Product Processing order:
Bank 1) Canara Bank
2) Bank of India.
Email admin@flowservemicrofinish.com
dispatch@flowservemicrofinish.com
Factory Area 3 ½ Acres ,
Built Up area : 15000 Sq. Ft.
Manpower 76
Branches Pumps Pvt Ltd., and Valves Pvt Ltd.,
Agencies Foreign System Pvt. Ltd – Germany
Panel Kena – South Africa
Uniworld Logistics – US.
Export Freight – Singapore.
Tel & Fax No. 2233202, 2332301 / Fax – 0836-2333205
BABASAB PATIL 15
18. FLOWSERVE MICROFINISH VALVES PVT LTD
STRUCTURE: ORGANISATION CHART
BOARD OF
DIRECTOR
MANAGING
DIRECTOR
TILAK K
ADMINISTRATION PLANNING PRODUCTION QUALITY
AND ACCOUNTS AND PURCHASE AND ASSEMBLY ASSURANCE
V.M.NAYAK PRASHANT V. ARAVIND A.
NATEKAR
PERSONAL SALES AND SHIFT I RECEIVING
OFFICER SHIPPING OFFICER INCHARGE QUALITY ENG.
POOJA ANGADI UMESH ANGADI UMESH G MANOJ N.
ASSISTANT PLANNING AND SHIFT II INPROCESS
ACCOUNTANT PURCHASE ASST INCHARGE QUALITY ENG
NARAYAN H. MAYUR MOHAN M. DANIEL
MAINTAINANCE FINAL PRODUCT
STORE OFFICER I INCHARGE ENGINEER
SHIVASHANKAR T NARAYAN PAI M. M. ROOGI
ASSEMBLY DEVELOPMENT
SUPERVISOR ENGINEER
STORE OFFICER II
KUMAR KATKAR MAHESH CHILLAL
LOCAL
PURCHASER
BABASAB PATIL 18
19. FLOWSERVE MICROFINISH VALVES PVT LTD
DIFFERENT FUNCTIONAL DEPARTMENT CHARTS:
ADMINISTRATION AND ACCOUNTS DEPARTMENT:
ADMINISTRATION
AND
ACCOUNTS
INCHARGE
PERSONAL
OFFICER
[FACTORY & PERSONAL SAFETY]
ACCOUNT
ASSISTANT
FUNCTIONS OF ADMINISTRATION DEPARTMENT (H.R)
Training
Recruitment
Safety
House Keeping
1. TRAINING
Objective:
To provide appropriate training to the personnel of various departments who
perform the quality control activities.
Responsibility:
Administration and Accounts (A & A) In-charge through personnel officer is overall
responsible to ensure that the training needs of personnel of all the departments are
fulfilled.
BABASAB PATIL 19
20. FLOWSERVE MICROFINISH VALVES PVT LTD
Personnel officer is responsible for identifying the proper trainer in consultation and
contact with the top level management for arranging the training.
. Training is given for employees once or twice in a month depending on the need. In
training the following aspects and topics are covered:
Product Application, Instrument Knowledge, Industrial Safety and First Aid, Basic
Computer Knowledge, Statistical Quality Control, ISO Awareness Leadership Quality,
Manpower Handling, Communication Skills, and Material Handling.
2. RECRUITMENT
Personnel officer is responsible for recruiting The right person for the right job at
the right time, He takes into consideration the knowledge, skill and work experience of
the person .
3. SAFETY
Objective: To ensure safe and healthy environment for personnel
Responsibility:
Administration and Accounts in charge through personnel officer is responsible for safety
related activities in the company.
Procedure:
Safety committee meeting is conducted every quarter i.e once in 4 months. Safety
related training for staff and workers is conducted once in two months such as Fire
Extinguisher, Chemical Hazardous, Personal Hygiene etc and first-aid facility is also
provided for workers.
Safety round-up is carried out by the personnel officer accompanied by H.O.D and two
workmenstaff of different department.
4. HOUSE KEEPING
Objective: To ensure good, healthy, clean, neat and safe work environment.
Responsibility:
While the activities are co-ordinate by the personnel officer, each and every individual in
the organization is responsible for the implementation.
BABASAB PATIL 20
21. FLOWSERVE MICROFINISH VALVES PVT LTD
Procedure:
For effective implementation of the system, the entire premises of the company are
divided into sub-zones as Production and Assembly division, Quality Assurance division,
Administration and Accounts division etc. Each sub-zone is headed by a team leader and
supported by co-ordinates, supervisory staff and workers.
PRODUCTION AND ASSEMBLY DEPARTMENT:
PRODUCTION
AND
ASSEMBLY
INCHARGE
SHIFT MAINTENANCE ASSEMBLY SHIFT II
MACHINE MAINTENANCE MACHINE
ASSISTANT
FILTERS
OPERATION OPERATION
HELPERS HELPERS
PRODUCTION:
The production department ensures that the production process is identified,
planned and carried out under the controlled conditions in accordance with monthly
manufacturing plan. The objective of this department is to improve the productivity, to
reduce the cost of production without any compromise on quality and to manufacture non
defective quality products by training the people in right manner and effective way.
OBJECTIVES:
1. Productivity improvement.
2. To reduce the cost without compromise on quality.
3. To manufacture “non defective product” by training the people.
BABASAB PATIL 21
22. FLOWSERVE MICROFINISH VALVES PVT LTD
PRODUCTION PLANNING AND PROCESS:
Upon the receipt or the work order copy, bill of material, monthly manufacturing plan
etc, the department head instructs the production planning personnel to determine the
material availability with reference to bill of material.
If there is any shortage of material the production and planning personnel will place
the material shortage list to planning and purchase dept. There by they will refer to the
production and plan and collect the material from stores through material requisition note.
If material intended and received is in excess, then the production personnel will return
these material back to the stores, with material return note.
The Head of department will then prepare daily production schedule through
which he schedules the production and machine loading for the day. The cell in charge
prepares and provides relevant document and instruction for processed and other tolling
in charge through his personnel ensures the production facilities like machines, tools,
fixtures etc, are available for production when required.
The cell in charge will load the machine and provide instruction to the machine
operators by means of job cards. The operator himself will instruct the components at
each stage of manufacturing and identifies the confirming, components by inspection
colour code. The products are either processed for standard or non-standard product. The
design for the certain products are standardized and kept in the production dept and for
non-standardized products are obtained from the design and development dept. The shift
in charge will collect the drawings from the draftsman for the processing. In consultation
with the production and assembly in charge, shift in charge will allocate material for sub-
contracting for machining through the stores officer.
When required for assembly the customer supplied products are collected from
stores against a written requisition ensuring that products has been issued for a particular
work order for which it is meant. Proper care is taken while handling these products for
assembly.
The P&A in charge schedules the assembly and prepare the assembly schedule and
ensure that the same is carried out through the shift in charges that prepare the assembly
job card and give instructions to the operators. After assembling the products are handed
BABASAB PATIL 22
23. FLOWSERVE MICROFINISH VALVES PVT LTD
over to the final inspection and testing section along with the valve assembly and testing
status formal and assembly job card.
After clearance from Quality Assurance dept the shift in charge will send the
assemblies to dispatch section and finished valve completion note is given to the stores.
There are two types of machines which are used in the production department:
1. Conventional machines
2. CNC machines
1. Conventional machines: All the operations in this types of machines are done
manually work the cost of such machines are cheaper & the capacity is very less as it can
handle only 1 operation at a there are conventional machines of ac the 4 types of
operations it maintains of such machines & it is less safe than CNC machines.
2. CNC machines: Computerized numerical control machines. This machines are
operated automatically i.e. a program is written for its function which is in assembly level
language i.e. economic codes which are not understood by human beings. In this type of
machine there are 2 types,
a) X&Y side (2 dimensional)
b) x,y,z side (3 dimensional)
BABASAB PATIL 23
24. FLOWSERVE MICROFINISH VALVES PVT LTD
PLANNING AND PURCHASE DEPARTMENT:
PLANNING
AND
PURCHASE
INCHARGE
SALES AND
STORE STORE LOCAL
SHIPPING
PLANNING OFFICER OFFICER PURCHASE
OFFICER
I II R
PLANNING:
Planning is the backbone of any organization. Success of any organization depends on
how well things are planned.
TYPES OF PLAN:
1. TENTATIVE PLAN: It is a plan for a particular which is drawn five weeks prior
to a month. It can be modified amended.
2. FINAL PLAN: It is a plan which is issued one week earlier to the particular
month. It can be modified, if required on the basis of information from other
departments.
OBJECTIVES:
For usage of resources to meet the delivery commitments.
SCOPE:
Applicable to all work orders and related activity of departments with respect to
monthly manufacturing plan.
BABASAB PATIL 24
25. FLOWSERVE MICROFINISH VALVES PVT LTD
RESPONSIBILITY:
1. Planning and Purchase in charge is responsible for drawing tentative and final
“monthly manufacturing plan” through planning assistant.
2. Production and Assembly in charge is responsible for modifying to meet urgent
customer requirements.
PROCEDURE:
1. Plan is drawn to approximate 90% of capacity and 10% of capacity is reserved to meet
URGENT amendments.
2. Tentative plan is modified /amended if required on the basis of feedback information
from other departments.
3. Final plan is issued one month earlier to the particular month.
4. Final plan is amended, if require on the basis of feedback from P&A department.
5. Valves which are planned to be manufactured in a particular month but could not be
manufactured are re-planned in consultation with P&A department.
6. Cause of not meeting the plan is discussed with P&A department.
PURCHASING DEPARTMENT
OBJECTIVES:
To ensure that all the purchase/ processed items and services meet the specified
requirements.
SCOPE:
Applicable to all raw materials, bought out items, sub contracted items, capital goods,
consumable and services to be produced.
DEFINITIONS:
SUB CONTRACTOR:
He is one who carries out processing on material / components supplied by FMVPL.
BABASAB PATIL 25
26. FLOWSERVE MICROFINISH VALVES PVT LTD
VENDOR:
He is one who supplies some specific components.
SUPPLIER:
All vendor’s & sub contractors are considered as suppliers.
RESPONSIBILITY:
1 P&P in charge is responsible for approval of supplier.
2 P&P in charge is responsible for approval of purchase order.
3 Planning assistant in co-ordination with quality assurance department is responsible for
evaluation of supplier and submit the report to P&P in charge for review and approval.
SALES & SHIPPING DEPARTMENT
RESPONSIBILITIES:
1. HEAD OF THE DEPARTMENT :
• The supervisor should look after to the product requirement, the order
acceptance, document approval etc.
• He is the only person responsible for solving the customer complaints,
identifications of training needs and maintenance of quality records
under his/her guidance.
2. SALES ENGINEER (Tender Reviews: TR) :
• Engineer himself is responsible for tender/ enquiry review, and follow
up and also for amendments review.
• He is responsible in preparation of cancellation note, maintenance of
concerned quality records & attending the customer during their visit.
3. SALES ENGINEER (Order Review: OR) :
• He is responsible for order acceptance.
4. SHIPPING OFFICER:
• He is responsible for handling, storage, packing and delivery, dispatch
follow up, providing delivery status and allocation of stock.
BABASAB PATIL 26
27. FLOWSERVE MICROFINISH VALVES PVT LTD
PROCEDURE:
a) Sales & Shipping officer will study the packing slip thoroughly with respect to W.O.
b) Size of the box will be decided the S&SO depending on the quantity.
c) S&SO will collect the value remember from Q.A.dept against packing slip
1. STRUCTURE
2. STYLE:
• The style of management in the organization is very much similar to TOP DOWN
MANAGEMENT. The Director from USA who is at the top most level takes strategic
decisions and is passed on to the Managing Director of HUBLI of the respective
company.
• Short term decisions are decentralized in FMVPL and Micro Finish Valves Pvt Ltd as
the number of employees is more and it would be impractical for the MD to take
regular decisions.
• Though the decision making is concerned only with the top management, the
company also emphasizes on PARTICIPATIVE FEEDBACK from the employees
and helpers on a regular basis to enhance thinking capacity of the employees.
• This is generally done by the Respective department incharge.
3. STRATEGY
To establish themselves as a global company with strong technology capabilities
FMVPL, has laid increased emphasis on devising its business strategy on aggressive top
line growth, a de-risked business model, increased operational efficiencies and CPI
programme adopted to improve the productivity. The company emphasizes on two key
elements that form the cornerstone of the company’s growth strategy:
• Developing a global product strategy
• Creating an integrated organization with world class quality valve to produce and
full service supply capability
4. SYSTEM:
MERIT RATING SYSTEM:
BABASAB PATIL 27
28. FLOWSERVE MICROFINISH VALVES PVT LTD
OBJECTIVES:
`To ensure the performance of the supplier with regards to Quality, Delivery, &
Service.
SCOPE:
These ratings are applicable to all the Suppliers, like sub-contractors, vendors,
traders & suppliers.
RESPONSIBILITY:
• Planning & Purchase Incharge Planning Assistant is responsible rating to
supplier.
• Planning & Purchase Incharge is responsible to carry out the supplier rating
with assistance of planning assistant.
REFERENCE:
• Goods received inspection
• Purchase order
• Statistical welding reports
• Rejection notes
• QA department work instruction.
5. STAFF
• Number and types of personnel within the organization.
• Number of employees: Above 70.
• The company considers the employees as one of the major resource. The skills of
the employees are constantly improved through various training programmes.
• The company organizes regular Departmental meetings MR meeting with the
members wherein the suggestions and feedbacks of the members are discussed.
6. SHARED VALUE
Guiding concepts, fundamental ideas around which a business is built – It is
generally simple, usually stated at abstract level, have great meaning inside the
organization even though outsiders may not see or understand them
BABASAB PATIL 28
29. FLOWSERVE MICROFINISH VALVES PVT LTD
7. SKILL:
Skills refer to the fact that employees have the skills needed to carryout the
company's strategy. Training and Development - ensuring people know how to do their
jobs and stay up to date with the latest techniques.
BABASAB PATIL 29
30. FLOWSERVE MICROFINISH VALVES PVT LTD
QUALITY ASSURANCE DEPARTMENT
QUALITY
ASSURANCE
INCHARGE
RECEIVING INPROCESS FINAL
QUALITY QUALITY PRODUCT
COMPONENT
WORKERS TESTING
High Temperature Test Fire Safe Test Cryogenic Test
QUALITY:
Quality refers to the degree of perfection as perceived by the user of a product. At
Flow serve Micro finish , the objective of the Quality Assurance department is to
maintain a consistent appraisal of the quality of the product at all stages of manufacturing
till the product is dispatched.
BABASAB PATIL 30
31. FLOWSERVE MICROFINISH VALVES PVT LTD
FUNCTIONS OF QUALITY ASSURANCE DEPARTMENT
• Incoming Material Inspection
• In-process Inspection
• Final Inspection
1) Incoming Material Inspection
All materials are purchased out door such as castings, bars, and bought items-
nuts, bolts and pickings and sub-contract items are inspected as per the drawings or
according to the applicable work instructions
Receiving Quality Engineer is responsible to ensure that the quality of incoming
componentsraw materialsproducts is in accordance with the established methods and the
quality of all accepted items are conforming to the specified requirements.
He is only responsible for identification of items, reviewing non-conforming
productscomponent, sub-contractor rating and for maintaining quality records.
He is also responsible for inspection of castings, bought out items and machined
components, which are received as samples and test the sample material as per the Work
Instruction.
2) In process Inspection
Components taken for further process are also inspected. Machines that are used in the
manufacturing process are also inspected periodically.
In process Quality Engineer is responsible to ensure that the in process componentsraw
materialsproducts is in accordance with the established methods and the quality of all
accepted items are conforming to the specified requirements.
In process Quality Engineer is also responsible for identification of items, reviewing non-
conforming productscomponent and for maintaining quality records and testing and
maintaining hydro shell testing reports of casing and cover.
In process Quality Engineer is also responsible for ensuring that the special processes
are in accordance with the established methods. (Calibration of inspection and
maintaining calibration records)
BABASAB PATIL 31
32. FLOWSERVE MICROFINISH VALVES PVT LTD
Special process carried out by in process quality Engineer is as follows:
a) Welding:
In process Quality Engineer is responsible for continuously monitoring the
welding process so as to ensure that it is in compliance with documented procedure. All
the welding process parameters are listed in welding process specification and are carried
out by a qualified welder.
b) Painting:
Painting is carried out as per work instruction of painting specification and the painters
have been qualified based on the past experience.
3) Final Inspection:
This inspection is mainly to check if any of the lapses that may have occurred in
the above stages.
Final Product Engineer is responsible to ensure that the products are in accordance with
the established methods and the quality of all accepted items is conforming to the
specified requirements.
Final Product Engineer is also responsible for identification of items, reviewing non-
conforming productscomponent and for maintaining quality records and to ensure that all
assembled productscomponents are identified with regard to inspection and test results.
Final Product Engineer is also responsible for issuing test certificates, material
certificates, compliance and warranty certificates as against requirement of Work Order
for closing all positive recall loops.
Final Product Engineer is also responsible for inspection of painted product
components as per specification.
Final Product Engineer is responsible to ensure that all outgoing components products
are subjected to dispatch inspection. He verifies the componentsproducts material of
construction, size, class, special requirements and metal tags etc with W.O. and ensures
that the sample tested valves are packed with identified box and note down the box
identification and then the inspection and testing results are noted down in the ‘Dispatch
Inspection Report’.
BABASAB PATIL 32
33. FLOWSERVE MICROFINISH VALVES PVT LTD
Inspection colors codes used by the Q .A. Department
Green : Conforming
Black : Accepted on Deviation
Yellow: Rework
Red : Reject
Dark Blue: Hold
BABASAB PATIL 33
34. FLOWSERVE MICROFINISH VALVES PVT LTD
RESEARCH METHODOLOGY
The methodology is the method used in the collecting the information, which
assists for the research problem.
The research design is in the descriptive in nature & for the data collection simple
random sampling method is used.
Statement of the Problem:
Safety Measures for employees in Flow Serve Micro Finish Valves Pvt Ltd
Objectives
• To find out the causes for manual accidents and remedies.
• To study the usage of personnel protective equipments.
• To identify the awareness of workers regarding safety.
• To study the overall effectiveness of the safety.
DATA SOURCES
A) primary data
The primary data collected through survey, by preparing questionnaire and meeting
respondents personally and interviews them and gathering information from them. Like
this primary data was collected. Hence the questionnaire is main source of primary data.
B) Secondary data
The secondary data collected from the company manuals, check lists and through
company web site
BABASAB PATIL 34
35. FLOWSERVE MICROFINISH VALVES PVT LTD
SAMPLING DESIGN AND PROCEDURE
1)The population
The populations for my project study which I have considered are the Flowserve
Micrifinish pvt ltd
Scope of study:
The scope of the study is, to study about the safety measures of the FSMFV Pvt Ltd. It
undertakes the all employees and all safety facilities which are available at company and
knowing about how they are using.
BABASAB PATIL 35
36. FLOWSERVE MICROFINISH VALVES PVT LTD
SWOT ANALYSIS:
STRENGTHS:
• The company has excellent network, which provide good quality product with
minimum time
• ISO standard helps to marketing in International Level.
• The good HR system is their like - Motivation, Training, to new employee etc.
• Feed-back information is provided to all employees
• The company has unity of team work, good salary to workers.
• Regular medical checkup & help to employees.
WEAKNESSES:
• It is not having a separate marketing dept.
• No direct exporting.
• No international recognition by its own name
OPPORTUNITIES:
• Potential market for spare parts is growing high.
• Export order received is greater than what they are able to produce, so opportunity to
increase production capacity for which ready market is available
• Whatever is produced is exported.
• Opportunity to enter plug valve market.
• International Customers shows more interest to buy Flowserve Microfinish products.
• Company has an out bond logistic management and documentation.
THREATS:
No threat in the sense, no competitors for it because it is not a independent firm but has
got JV with Flowserve USA. So threat may be any action of Flow serve USA on Micro
BABASAB PATIL 36
37. FLOWSERVE MICROFINISH VALVES PVT LTD
finish like taking back shares invested in Micro finish or can stop giving export order to
Flow serve Micro finish
THEROTICAL ASPECTS TO THE STUDAY
INTRODUCTION :-
The Factories Act 1948 is a comprehensive piece of legislation all the aspects regarding
the factories. Under the rule making power practically all the states have framed their and
regulations thereby ensuring maximum advantages In order to trace history of legislation
which resulted in legislation the factories act 1948 we to go back to the last decade of the
19th century. Till the end of 19th century there was no control of the state over the
conditions of employment and the employees did according to their liking and advantage.
After great objections by the employers the Indian factories act 1881 was passed which
gave a limited measure of protection to children provisions for fencing of some
dangerous parts of machinery were also there. In 1980 government of India appointed a
factories commission and on their recommendation the act of 1981 was passed. In 1911
another act was passed after taking into account the reports of Freer smith committee and
factory labour commission.
Object of the Act
It is clear from the preamble that the factories act was engaged to consolidate and amend
the law regulating labor in factories. It is probably true that all legislation in a welfare
state is enacted with the object of promoting general welfare but certain type of
enactments are more responsible of some urgent social demands and also more immediate
and visible impact on social vices by operating more directly to achieve social reform.
BABASAB PATIL 37
38. FLOWSERVE MICROFINISH VALVES PVT LTD
SAFETY
Meaning:
Safety is a basic and ordinary requirement in a factory. Unless body, mind life of workers
is secured smooth and proper working cannot be ensured in any factory. As indicated
earlier the object of these legislation was to ameliorate working conditions and to provide
with effective measures of safety of the workers from accidents causing partial or total
disablement and sudden misfortunes affecting the victims and their dependants. The
factories act 1948 deals with such security and safety measures under its chapter iv
containing sections 21 to 41. There have been made significant amendment in the
provisions dealing with safety so as to make the measures more effective and appropriate.
It would be desirable to discuss these safety measures.
Fencing of Machinery:- sec 21(1) contains the provisions regarding the safety by fencing
of machinery. The sec lays down that the following shall be security fenced by safeguards
of substantial construction which shall be kept in position when the parts of machinery
are in motion or in use.
i) The head race and tailrace of every water wheel and turbine
ii) Any part of a stock bar which projects beyond the headstock of a lathe
Speed not to exceed: The speeds so indicated in the notice shall not be exceed and in
every factory effective measures shall be taken to ensure that the safe working peripheral
speed of every revolving vessels, cage, basket, flywheel, pulley disc or similar appliance
driven by power is not exceeded.
BABASAB PATIL 38
39. FLOWSERVE MICROFINISH VALVES PVT LTD
Employment of young person on dangerous machines:- Section 23 lays down the
general rule that no young person shall work at any machine to which this sec applies
i.e any dangerous machine so prescribed under sub sec (2) of sec 23 by the state
government. However they can be allowed to work if,
1. They have been fully instructed as to dangers arising out of in connection with
the machine and the machine and the precautions to be observed, and
2. Has received sufficient training in work at the machine or is under adequate
supervision by a person who has a thorough knowledge and experience of the
machine.
Precautions against the use of portable electric light: - section 36A provides that in
any Factory,
a) No portable electric light or any other electric appliance of voltage exceeding 24
volts shall be permitted for use inside any chamber ,tank, vat, pivot, pipe, flue, or
other confined space.
b) if any inflammable gas ,fume or dust is lightly to beset in such chamber ,tank, vat,
pit, pipe, flue or confined space no lamp or light other than the that of flame proof
construction shall be permitted to be used their in.
Precautions in case of fire:-
Section 38 of the act for the precaution of fire in the factory. The general precaution in
this Aspect in that every factory shall be provided with such means to escape incase
of fire as may be Prescribed, The following other precautions against fire shall also be
taken,
a) Exit doors of room shall not be locked so that they can’t be easily opened and all
such doors unless they are sliding type shall be constructed to open outwards.
BABASAB PATIL 39
40. FLOWSERVE MICROFINISH VALVES PVT LTD
b) Every window door or other exit affording a means of escape in case of fire other
than ordinary exit shall be distinctively marked in the language of the majority of the
employed persons in red letters of adequate size or by same other effective and clearly
understandable sign etc.
Safety of building and machinery:-
Section 40 provides the measures for the safety of any building or machinery or
ways, if it appears to the inspector that any building or part there of part of ways or
machinery or plant is in such a condition which is dangerous to human life or safety he
may serve on the occupier or manager or both of factory an order in writing specifying
the measures to be taken and requiring them to be carried out before a date specified in
the order. In the same way if it appears to the inspector that the use of any of the above
mentioned
Things involves imminent danger to human life or safety he may serve on the
occupier or manager or both on order in writing prohibiting its use until it has been
properly repaired or altered.
No woman or young person be allowed to clean and lubricant etc
Sub section (2) of section 22 lays down that no woman or young person shall
transmission machinery while it is in motion or to clean, lubricate or adjust any part of
any machine if in doing so the women or young person would be exposed to rise of injury
from any moving part either that machine or any adjacent machinery. The state
government may prohibit by notification in the official gazette, in any specified Factory
or class or description of factories the cleaning, lubricant or adjusting by any person of
specified parts of machinery when those parts are in motion. Section 41 provides that the
state government may make rules requiring the provisions in any Factory or in any class
or description of factories of such further device and measures is so of securing the safety
of persons employed there in as it may deem necessary.
BABASAB PATIL 40
41. FLOWSERVE MICROFINISH VALVES PVT LTD
Safety measures at Flow Serve Micro Finish valves pvt ltd
Introduction:-
The Flow serve Corporation of dollars, Texas USA and the micro finifsh group of
companies Hubli, Karnataka, India. Set up to manufacturing plants with joint ventures in
Hubli in 1997. The inauguration of both manufacturing plants occurred on November 1st
1997. Production activities at both plants were initiated immediately after the
inauguration.
The flow serve micro finish valves pvt ltd engaged in the manufacturing ball
valves, plug valves and other miscellaneous valves products. Adjacent to this plant is the
flow serve valves pvt ltd.
The manual on safety, health and environmental affairs is intended to customize
the flow serve corporate policy on these affairs in the Indian environment. Hubli is
considered relatively small industrial area of the Karnataka state. Therefore, many
policies prevented on the other major industrial areas of India e.g. Bangalore, Mumbai etc
may not be applicable at hubli location.
SAFETY, HEALTH AND ENVIRONMENTAL POLICY
Introduction
Scope:
This policy applies to both manufacturing units located in Hubli, Karnataka, India.
Purposes:
1. To provide safe working environment for all production and staff workers
including visitors.
2. To become leader in the community by creating “safe working conditions” for
employees.
3. To follow the flow serve and microfinish companies policy on safety, health
and environment
4. To exceed all the governmental, local, state and national rules, policies and
regulation.
BABASAB PATIL 41
42. FLOWSERVE MICROFINISH VALVES PVT LTD
Responsibilities:
• The chief operating officers of these units will be responsible for
implementation, Monitoring and compliance of policy.
• The M.D. will oversee that policy is followed with good intent. The enclosed
pages cover the various policies, which are deemed appropriate at this Time,
as government regulations are revised and / or the Flow serve corporate
policies are updated. This policy will be revised and kept unto to date.
EMERGENCY PROCEDURES
The COO will have the responsibility for coordinating all emergency response measures.
The coordinators will be either on the facilities or on the call (i.e.) available to respond to
emergency by reaching the facility within the short period of time at all times at all times.
The coordinator should be thoroughly familiar with all aspects of the emergency plans,
the operation and activities at this facility involving hazardous materials and the facility
layout. The coordinator will have full authority to commit the resources to needed to
carry out this Plans. Whenever there is an immediate or an actual emergency situation,
the emergency coordinator Shall immediately, active internal facility alarms or
communication system if not activates Automatically to notify or affected personnel. In
the event of discharge fire exposure the coordinator shall immediately identify the
character, Sources amount and content of any discharge material. He/she may do this by
observations and/ Or review facility records of manifests and if necessary by chemical
analysis. Concurrently the Coordinator shall immediately assess the possible hazards to
the human health as environment That may result the discharge, fire or explosion. This
assessment shall consider both direct and indirect assets of discharge fire or explosion. Is
the assessment indicates that evaluation of local areas be advisable. He /she shall
immediately notify the appropriate official is making decision whether local areas should
be evaluated and he will make a report to individual.
BABASAB PATIL 42
43. FLOWSERVE MICROFINISH VALVES PVT LTD
1. Name and phone no or reporters.
2. Name and address of facility.
3. Time and type of accident.
4. Name and quality of materials involved.
5. The extent of injuries, if any
6. The possible hazards to human health or the environment outside the facility.
During an emergency the coordinators shall take all the responsible measure necessary to
insure fires, explosions and discharge do not occur reoccur more spread to other.
Hazardous materials at the facility. These measures shall include where applicable,
stopping, process and operations collecting and containing discharge waste and removing
or isolating container. If facility stops operation in response to a discharge, fire and
explosion the coordinate shall monitor leaks, pressure build up gas generation, or rupture
in valves, pipes or other equipments, whatever this is appropriate.
Immediately after emergency the coordinate will provide for the treating, storing
or disposing of Recovered waste, contaminated soil, surface waste or any other material
that result from a discharge, fire or explosion at the facility. The coordinators will in
affected areas of the facility that the following items be followed,
A. No waste that may be incompatible with the discharge material is treated,
stored or disposed of unit cleanup procedures are completed.
B. All emergency equipment is cleaned and fit for its intended use before
operation is resumed.
EMERGENCY EQUIPMENT
Fire extinguishers and red colored bucket with sand (marked fire) are placed in the
facility.
CONTINGENCY EMERGENCY PLAN
BABASAB PATIL 43
44. FLOWSERVE MICROFINISH VALVES PVT LTD
Spill containment:
1. All containers with hazardous. Waste materials shall be kept in the appropriate storage
Area. Containers shall be handled in such way and with the proper equipment, as to avoid
Damage and possible spill.
2. If a spill occurs out side of the normal storage area immediately connected the
emergency
Coordinator clean up procedure of containment of spill shall be accomplished as follows,
a) Providing adequate ventilation and obtain protective clothing.
b) Utilizing sand spread sufficient amount of the spill to correct the materials.
c) Sweep or reside into containers and properly label prepare for the disposal.
FIRE PREVENTION PLAN
The fire extinguishers shall usually inspected monthly and annually certified. All heat
producing equipment shall be inspected at least annually during the month of October
and at the any other time that maintenance is bring performed in the equipment to
prevent accidentally ignition of combustible materials a list of heat producing equipment
shall include, but is not limited to,
a) Generator – Flow serve Micro finish Valves pvt ltd.
b) Generator – Flow serve Micro finish pumps pvt ltd.
c) Electrical Sub-station area.
BABASAB PATIL 44
45. FLOWSERVE MICROFINISH VALVES PVT LTD
FLOWSERVE MICROFINISH: SAFETY CHECKLIST
1. Safety records keeping
a) Verification of records.
b) Verification of reports.
2. Employees Protection
a) Safety glasses
b) Safety shoes
c) First aid kit
No empty bottles / tubes
No expired date of bottles / tubes
Trained employees names
First aid kit list outside the cabinet
3. Machines, Equipment etc
a) Machine chip guards
b) Machine safety guards
c) No trash/chips/coolant around machine
d) Grinders: opening between tool rest and wheel less than 1/8”
4. Electrical
a) No extension cords
b) Electrical cords – Not on pedestrian traffic areas
c) Easy access to electrical panels
d) Machinery / Equipment properly grounded
e) Electric substations closed and locked with warning signs
5. Environmental
a) Coolant waste tank – utilization
b) Machine chip storage areas – organized and chips contained
c) No unmarked bottles /cans/ tubes
d) No unused bottles / cans / tubes
e) No chemical spills on floors
f) Proper ventilation around painting areas
BABASAB PATIL 45
46. FLOWSERVE MICROFINISH VALVES PVT LTD
6. Housekeeping
a) No broken /damaged /floors
b) No wet areas including toilets
c) No trash on the plant floor
d) No trash around the JV property
e) Location of trash cans inside the JV property
f) Aisles clearly marked – repaint if needed
g) Everything should have a home
6. General
a) Fire extinguishers every 15 meter or 50
b) Fire extinguishers – periodically inspected and documented
c) Easy access to the ‘Fire Extinguisher’
d) Nothing stationery in aisles
e) No storage in the marked aisles areas
f) No storage the painted yellow/red areas
g) No splinters / sharp corners on any device/object/part
h) Everything properly organized/secured
BABASAB PATIL 46
47. FLOWSERVE MICROFINISH VALVES PVT LTD
DATA ANALYSIS
work experience in flowserve microfinish valves pvt,ltd
more then 10 years
less then 5 years
5-10 years
Analysis: From the above graph we understood that 30% of the employee’s are working
from less then 5 years, 50% of them are working from 5-10 years, and 20% of them are
working from more then 10 years.
Interpretation: From the survey it is revealed that majority of the employees (50%) are
working from 5 to 10 years.
BABASAB PATIL 47
48. FLOWSERVE MICROFINISH VALVES PVT LTD
Analysis: From the above graph it is observed that out of the total, 20% employees are
aware about 40-60% of the company safety measures. And 40 % employees are aware
60-80%. About the company safety measures.
Interpretation: As per the survey we come to know that 60-80% numbers of employees
are aware of company’s safety measures.
BABASAB PATIL 48
49. FLOWSERVE MICROFINISH VALVES PVT LTD
safety measure company has provides
shoes
hand gloves
safety(eye)glasses
all the above
Analysis:
From the above graph shows that the company has provided all required safety facilities.
Shoes, Hand gloves, Safety (eye) glasses, Face shield etc. 94% workers are having all
these facilities and remaining 2% workers are having shoes and hand gloves.
Interpretation:
As per the survey we come to know that 94% of the employees are having all the
facilities of safety measures of the company.
BABASAB PATIL 49
50. FLOWSERVE MICROFINISH VALVES PVT LTD
emergency safety tools available in company premises
emergency signals(li
all the above
Analysis:
From the above and graph shows that all required emergency safety tools are available at
company premises. Emergency warning bell, Emergency exit doors, emergency phone,
and emergency signals (light) etc. 96% of the workers are knows about all these and only
4%
Interpretation:
As per the survey it is interpreted that 96% of the employees are knows about all
emergency safety tools available in company premises.
BABASAB PATIL 50
51. FLOWSERVE MICROFINISH VALVES PVT LTD
company has trained how to use of fire extinuishers
yes
Analysis:
From the above table and graph shows that the training of fire extinguisher, company has
given training to the all workers about how to use the fire extinguishers in case of fire
accidents. 100% workers are trained.
Interpretation:
As per the survey all the employees are trained how to use fire extinguisher.
BABASAB PATIL 51
52. FLOWSERVE MICROFINISH VALVES PVT LTD
ventilation and lighting facility in working area
average
very good
good
Analysis:
From the above table and graph shows that the company has well ventilation and lighting
facility at working area. The 40% workers are told very good and 28% workers are told
good and 32% workers told that average about the ventilation and lighting facility.
Interpretation:
As per the survey 40% of the employees are satisfied with the company lighting in
working area.
BABASAB PATIL 52
53. FLOWSERVE MICROFINISH VALVES PVT LTD
are you satisfied with company's safety norms
highly satisfied
moderate
satisfied
Analysis:
From the above table and graph shows that the workers are satisfied with company’s
safety safety norms.22% employees are moderate and 15% are satisfied and 13%
employees are highly satisfied with company norms.
Interpretation:
As per the survey 44% of the employees are moderate about company’s safety norms
BABASAB PATIL 53
54. FLOWSERVE MICROFINISH VALVES PVT LTD
does company takes sugggestions or opinions from you
yes
Analysis:
From the above table and graph shows that, the company takes suggestions about the
safety from workers.100% are told yes’. Company has takes suggestions.
Interpretation:
As per the survey all the employees are told company takes suggestion or opinions about
safety measures.
BABASAB PATIL 54
55. FLOWSERVE MICROFINISH VALVES PVT LTD
in case of accidents how does the company compensates
any others(specify)
insurance
compensation
Analysis:
From the above table and graph shows about the insurance and compensation facility of
the company. 32% employees are told insurance and 60% employees are told
compensation and 8% are told others.
Interpretation:
As per the survey 60% of the employees are told compensation is provided in case of
accidents.
BABASAB PATIL 55
56. FLOWSERVE MICROFINISH VALVES PVT LTD
is company provides you any type of loans
other
children education l
Analysis:
From the above table and graph shows about the loans, the company provides loans to
the workers. 98% workers are told company provides children education loans to workers
and 2% other loans.
Interpretation:
As per the survey 98% of the employees are said that company provides children
education loan.
BABASAB PATIL 56
57. FLOWSERVE MICROFINISH VALVES PVT LTD
are you satisfied with overall management safety polies
neither satisfied,no
highly satisfied
satisfied
Analysis:
From the above table and graph shows that the company workers are satisfied with over
all management policies. 40% are highly satisfied and 30% are satisfied and 30% are
nither satisfied nor dissatisfied.
Interpretation:
As per the survey 40% of the employees are highly satisfied with over all management
safety policies.
BABASAB PATIL 57
58. FLOWSERVE MICROFINISH VALVES PVT LTD
Findings
• 50% of the employees in Flowserve Micro finish Valves are working from past 5-10
years and 5% are working from last 5yrs that is they have good experience.
• It is being observed that 80% of employees are aware of 60-80% of safety measures
policies remaining 20% employees are aware of40-60% safety measure policies
• The company almost provides all safety measures as it is opinion of 94% of employees.
Remaining 6% employees are dissatisfied.
• The company almost provides all safety tools as it is opinion of 96% of employees. Rest
4% employees are only knows about emergency signals (light).
• 100% employees have agreed that they are trained in using fire extinguishers.
• 40% employees find that ventilation and lighting facility is very good. Remaining 28%
workers are told good.
• Only 26% employees are highly satisfied and rest of 74% employees are moderate about
safety norms.
• The company provides only the 60% compensation and 40% insurance to the employees.
• The company provides 98% children education loan which is not enough for the
employees existence.2% others.
BABASAB PATIL 58
59. FLOWSERVE MICROFINISH VALVES PVT LTD
SUGGESTIONS
• The company may conduct seminars on the safety policies so as to make all
the employees be aware of it.
• As the accidents that occur during the welding, cutting, drilling and polishing
the company may provide the insurance facilities to employees in case of any
bad events (accidents) are takes place (occurs) especially the employees who
work under risky job.
BABASAB PATIL 59
60. FLOWSERVE MICROFINISH VALVES PVT LTD
CONCLUSION
During the study we come to know that all workers of FSMFV Pvt Ltd are
satisfied regarding company’s all safety measure facilities. The company has takes care of
employees. Company has provides all basic required safety facilities to employees.
At Flow Serve Micro Finish Valves pvt Ltd the study of Safety Measures
reveals that the more caution take for safety and personnel protective equipment. The
zextent of occurrence of accidents are uncared conduct by the work, which results hit, fall
or slip etc .Flow Serve Micro Finish Pvt Ltd has safety committee of members, which
comprises each person from administration department to the worker. Flow Serve Micro
Finish Valves Pvt Ltd company conduct safety walk or round once in fifteen days along
with the worker and safety members once in two months safety training for Flow Serve
Micro Finish Valves Pvt Ltd conduct safety meeting once in quarter safety audit is done
once in a year from Flow Serve USA. Flow Serve Micro Finish Valves Pvt Ltd has first
aid facility, kept suggestion box, safety slogans are written on the walls. Flow Serve
Micro Finish Valves Pvt Ltd sents safety reports to Flow Serve USA corporation once in
every month. The company has got safety facility award from Flow Serve USA
corporation.
BABASAB PATIL 60
61. FLOWSERVE MICROFINISH VALVES PVT LTD
BIBLIOGRAPHY
1. Company Manuals:
a) Work instruction
b) Procedure
2.Company Safety Measures Checklist and through observation
3.HRM By P.Subbarao
Websites:
a) www.microfinishvalves.com
b) www.microfinishgroup.com
BABASAB PATIL 61
62. FLOWSERVE MICROFINISH VALVES PVT LTD
QUESTIONNAIRE
Dear Sir/Madam,
Your Valuable opinion by filling of the questionnaire given below.
1) Personal profile
Name : phone no:
Age : Email ID:
Occupation:
Please read each statement given below carefully and put a tick in the column which bet
reflects your personal opinion.
2) How long you have been working here?
a) Less than 5 years [ ] b) 5years – 10 years [ ] c) More than 10 years [ ]
3) To what extent are you aware about the company’s safety measure policies?
a) 10 – 20% [ ] b) 20 – 40% [ ]
c) 40- 60% [ ] d) More [ ]
4) What type of safety Measures Company has provides you?
a) Shoes [ ] b) Hand gloves [ ] c) Safety (eye) glasses [ ]
d) Face shield [ ] e) all the above [ ]
BABASAB PATIL 62
63. FLOWSERVE MICROFINISH VALVES PVT LTD
5) What are the emergency safety tools available in your company premises?
a) Emergency warning bell [ ] b) Emergency exit doors [ ]
c) Emergency signals (light) [ ] d) All the above [ ]
6) Whether company has trained how to use of fire extinguishers in case of fire?
a) Yes [ ] b) No [ ]
If No, the reasons are:
Lack of interest in yourself [ ]
Lack of Training [ ]
Any others (specify)………………………………………..
7) How is ventilation and lighting facility in working area?
a) Very good [ ] b) good [ ] c) average [ ] d) poor [ ] e) very poor [ ]
8) Are you satisfied with company’s safety norms?
.
Highly dissatisfied Dissatisfied Moderate Satisfied highly
satisfied
9) Does your company takes suggestions or opinions from you?(about safety
measures)
a) Yes [ ] b) No [ ]
BABASAB PATIL 63
64. FLOWSERVE MICROFINISH VALVES PVT LTD
If No, the reasons are:
Lack of time [ ]
Lack of interest in the Management [ ]
Any others (specify)…………………………………………………
10) What are the options given by the company in case of accidents?
a) Insurance [ ] b) Compensation [ ]
Any others (specify)…………………………………………………
11) Is your company provides you any type of loans? (like)
a) Housing loan [ ] b) children education loan [ ] c) other [ ]
12) Are you satisfied with overall management safety policies?
1) Highly satisfied [ ]
2) Satisfied [ ]
3) Neither satisfied, nor dissatisfied [ ]
4) Highly dissatisfied [ ]
5) Dissatisfied [ ]
BABASAB PATIL 64
65. FLOWSERVE MICROFINISH VALVES PVT LTD
13) Any suggestions regarding safety measures……………………………………
……………………………………………………………………………………..
……………………………………………………………………………………..
THANK YOU FOR SPENDING YOUR PRICIOUS TIME WITH ME
BABASAB PATIL 65